Important! My apologies, in the video I stated that esp32 is single core which is not correct. Both chips are dual core. Sorry for that confusion.

Such a great little board although runs slightly hot. Always in awe of what you are able to make these devices do!

Your videos are getting better and better. I'm looking forward for the awesome projects you'll make with this new-good-looking board. Good luck.

I stumbled upon a few of your videos yesterday and it inspired me to get a few displays. one of them was delivered this morning so I'm excited to try it out.

Subscribed and liked! I just bought two of these thanks to seeing them on your video. I have been impressed by all the Lilygo products I've seen so far and this one also looks excellent.

A very lively and nice looking display. Smooth animation, a pleasure to look at!

This is great to discover you and this little gem of a board!

Thank You - I got this also up and running. In the mean time I implement MQTT to display values with subscription. With this I can use it as a display for many home automation data. It's hard to find information, so your videos are of much value.

Excellent video! Thank you for taking the time to make this and share it with all of us! I am of course subscribed with notifications turned on and thumbs up!

I subscribed to your channel and since I'm already a Banggood customer I'll make sure to use your link when I buy this board, I wanted one of these anyways and now with the help of your videos and the sketches it's way easier for me to get into this particular developer board, it's pretty hard to find good tutorial videos about these boards and in a language that I can understand so thanks a lot for doing this. I'm looking forward to the next video you come up with and since I'm new to your channel I'm going to watch some of your older videos to see if there's something that's useful to me for my projects. Best regards, Ricardo Penders.

Cool, your projects are well explained and fun to learn. I've been following along with my T-Display (first version). Looking forward to getting a T-D-S3 and following along. Your work and videos are beautiful. Hello from Canada:) yay Volos yay TTGO

I was just about to buy the old board when I saw your video! Now I'm definitely getting the new one! Thank you!

Great site. Looking forward to follow you. THANK YOU for your work !!!

1st time to your channel and this is a neat board so I'm very much looking forward to seeing more projects using it thank you for the excellent introduction

And ordered! I am consistently awed by how good the screens of your projects look (and to be honest, I'm a little jealous) :-)

This is just Excellent. Thank you for sharing your knowledge with us.

Hi, just came across your channel - very excited to see what you can teach me about this Lily GO T-Display S3.

Thanks for the videos, you were suggested , Im glad I watched!!!

Both ESP32's are dual core. It's a nice product, looking forward to more instructional videos. Thanks a bunch!!

This looks REALLY good! This might even make a fully featured Meshtastic/LORAwan device possible. I'm getting old school pager vibes already.

The interface in the example program is clean and clear; Good job. Code ran in VS Code with a couple of minor changes, which is certainly novel with some of the other example programs on yt. Great program to base other designs on, so thanks for all the information.

Tbh.. the looks like more than 32fps.. what a beautiful screen!! Subbed to not miss the projects 😁

That’s a nice board, something else for my shopping list! Thanks 👏🏾👍🏾🤓

Thanks a lot for your interesting video! Please keep creating your projects based on this devboard.

I've got to get this!! thanks for the awesome video

Good afternoon cool board quite powerful I'm really looking forward to the Internet radio with a weather station and a clock :) thank you for your work

Great work. Great video. Thank you for posting this !!!! 😀😀😀

Your videos are great ! Please do more videos on the T-Display S3 ESP32S3

Great Video. Thanks! I am the new subscriber you were requesting in your video :)

Hey so happy to find your channel. Not a programmer, just an artist with time for creativity. But still I don't want to lose the opportunity to make cool things out of these modules. I want to make something cool as well as useful out of it. So subscribing.

thats so cool!! I want to put this in my proton pack or the neutrino thrower

Great Video! Would be great to see this board used for a SDR Radio Receiver waterfall display!!

Now that is an impressive board, thinking of so many things could use It for and that display, joyess.

Awesome ! This looks like an excellent upgrade 👍

So many features on that board that looks impressive. I recently received the rp2040/C3 combo that I still need to b explore a little, but this is actually what I wanted when I bought that one. The C3 is decent, but lacks the dual cores. Rp2040 would give me more cores, and potentially other options but then I'm programming for two separate systems... not ideal.

Surprised you have any free time to make videos , but glad you do. Just ordered two (just in case one doesn't work). Thanks for the great content.

A bio mi je poznat naglasak :D Slučajno sam otkrio tvoj channel, super su ti videi, baš pokrivaju ono šta radim na poslu👍

Very cool Thanks. Beautiful display indeed.

Thanks for video. Great board! 🙂

look forward to your vids on this boards .. i'm all in 100% hahaha .. perhaps make a vid how to use the data pins without having to solder pins to it.. i believe you mentioned that in this vid .. look forward to working with this board .. my first ESP32 boards.. hahha Greetings from The Netherlands..take care..see you online..

Thanks - I have subscribed & ordered a board.

Thanks from Colorado

That refresh rate! 😍

Subscribed for a long time!

With all due respect, your english is wonderful my friend. Cheers

Hello! Have you attempted to use/mount SPIFFS file system on this board? Just curious, as I have had issues with both the S2 and S3 versions of ESP32 Adafruit boards...

6:44 , i think esp32s3 which used in new ttgo display working exactly the same with the old esp32 but in more powerfull way, where both of them have 2 cores and also both of them support ble and bluetooth classic, i think the main differences of the esp32 s3 is that it also come usb to serial hid without removing the second core and the bluetooth connectivity, CMIIW

This would be a good project for a 'fridge thermometer' a little light detector for when you open the fridge, a little thermocouple to measure the temperature, screen turns on when you open the fridge due to the light coming on, and shows the current temperature with a graph over the last 12/24 hours. Shows little yellow lines each time the door was opened (light sensor activated). Logs the temp in say 15 minute intervals.

What an awesome little display!!

Thanks for the great video. I'm wondering, how would you solder on the header pins?

Great video! Thanks for the info. I will order one and I subscribed. Thanks. - sweden

The older ESP32 chip is also dual core, though there are single core versions of it but your TTGO board there is the more common dual core! The main differences between the ESP32 and ESP32-S3 are the S3 has slightly less RAM (512Kb vs ESP32's 520Kb), more GPIO than the ESP32, BT5 (LE) implementation, better low power modes, plus an AI acceleration support from vector instructions whatever that does! lol

Ohmygod! it's amazing project 😍 🙌 would you mind sharing me you project on this video? I am so excited to learn more!

Great Video. Excellent work.

This device looks great!

I went for every projekt that needs a nice looking case to M5 Stacks. The annoying thing on ESP Boards is that you need to build your own cases - and this process can easily be more effort than the complete ESP32 Development. M5 Stack costs more, but you get a nice Case and Display when needed. And everything works with everything from M5 Stack :-)

Thank you for your all projects on Lilygo ! Which connectors are on the board , are there JST ? Battery maybe 1.25 but other one?

Hello, Thank you for great video, Question can we use this to make UTP network cable tester ?🤔 Thank you

Great video thanks! In your opinion, what would be the best camera to integrate qr reader into this board?

Thank you. I have two questions before buying. - Does the display function when the board is powered from a LiPo battery? (I've read somewhere it does not, but this would be strange) - Can the number of gpios be expanded (is there a i2c for this, or how is it done)?

I took your code and did a lot of spiffing upon it. Now, the time changes uniformly and the useless extra array of numbers is gone. Running at 22 fps when I started. Now 27. Interesting code in spots. The debounce is interesting. Not really a debounce but it does let the code keep running even with the button still pressed. Better than some demos I have seen.

Hi, thanks for the great introduction video. Please can you make a project for reading some values by using an AD converter. The curve in your display and other screen with a big number would be great. Thank you very much. Because your video I ordered the display. :-)

Hello Volos Projects! Thanx for your great videos! I used one of your codes for my first esp32 project. Can you answer me this… Is the s3 Display brighter than the one of the ttgo?

Thanks for a great video

That's an impressive display

If the GPIO pins are soldered onto the board, is there a good case that can be used with this combination? I'm looking for a case that would be good for this. Do you have recommendation?

Very nice video, TNX.

Can it run Doom?

Hi great video like always is there a way to disable that onboard green led ?

Dude. This board is awesome. Great veeedeeoh.

What about of the brighteness of the display? It is readable outdoor under a sunshield/suncover? Maybe the brightness can be regulated/pumped up?

Thanks for this video. The screen and other updates on this look great! Does WiFi support 5Ghz yet?

Thank you again for you’re videos. One question. Don’t you have to unmount the screen to be able to sold the pin’s headers? Thanks 😃🤟🏽.

That's excellent. I just ordered one. o7

GOOG JOB! can it work as an Oscilloscope ? my test shown nothing when input sine wave. thanks.

Built in display buttons and battery monitoring? I want one! I'd love to learn S3 with you 😀

Do you know if they have fixed the ADC issues with the new S3 chip?

The Lilygo board capabilities are well explained. Me from India, new to your channel. Would like to see a oscilloscope implemented on this board. Or may be, you already have done so /plan to do so ?

hi sir. can you make a network traffic monitoring project with esp32 board on round tft display?

Hello! very good review of the device!

Where can I obtain the .zip resource library for the ttgo s3 display tft_espi? Thank you

Excellent video, you do really great work. That screen looks stellar. I got the code from github compiled and uploaded to the board (using arduino IDE) and nothing displays on the screen, so I tried a second board, same result. I put my WIFI ssid info in . My thoughts are that it wouldn't compile and upload if there were missing libs The screen is black, I'm doing something wrong but I can't figure it out. I'm open to any ideas :) My Bad, Had the wrong board selected. I know my glasses are around here somewhere :) It works great

Hello Volos, 1 more question. I am attempting to use an mpu6050 with my t-display. It says to connect to i2c clock and data, but i dont see those marked. I think they are in use by the display. is there a way to use an mpu with this device ?

Are those mounting holes on the end opposite the USB connector?

I have the RP2040 version, and I have no idea how to use it. 😞 I bought it out of excitement, even though I know so little about microcontrollers. The thing I'm confused about, how come even in RP2040 projects, there's almost always an ESP32 chip involved? It is difficult for a project to ONLY involve an RP2040 chip?

Hello my friend. Can you Link to some page with actual projects for this Board? I would like to understand more about it and make a simple internet monitor for my home.

going to order one now!

Nice video! Could you recomend me a nice and complete kit to star with ESP32 from 0. Thanks

How do you develop these fantastic GUI'S in your examples ?

Sorry, I was thinking of “another new ESP32 with built in POE! IT DOES NOT HAVE A POE HAT. I LOVE YOUR ESP32 WITH SCREEN. PLEASE CREATE PROJECTS USING IT. IDEAS. GOD BLESS! LOVE YOUR VIDEOS!

Excellent!

This is great what can you do with this? Can you see how much power is being used by a plug-in charger can I see how much power is coming over my anchor cable?

does this have 10 digital and 5 analog inputs available in addition to the screen and Bluetooth being used?

Nice video ... does anybody know where to get the sketch that shows the flip-clock? It is shown in many pictures for that board - but I could not find a download for that sketch yet ...

Thank you for your great videos. I can't manage to get the screen working, I am using liligo's version of TFT_eSPI. but the screen keeps being black. Please help Thank you

Looks like something i dont need but want.

You said 32fps and it’s using full sprite updates, which makes me worry lots of cycles updating the display. Do the updates run on the main core? Does it consume many CPU cycles?

Looks awesome, but the BangGood link you provided says it's discontinued.

Hi friend, I’m newbie to this, let me ask you please, is this nice stuff for comunication and monitoring lifepo4 batteries? Thanks!

Hi Volos, great video as usual. Thank you for your work! Have you tried to power this board without using USB? The schematics suggest it should be possible, but mine won't boot when I power it from the 5v pin (or from the li-po connector on the back). Any ideas would be great. Thanks again for the great videos.