Jet Powered Go-Kart (Top Speed Run)
Переглядів 746,380
День томуI Built another Jet Go-kart just to see what the Top Speed of the single Engine Jet-powered Go-kart is.
In the previous jet go-kart video I did everything except for a top-speed run, so here it is, I thought it was kind of weak because I was expecting a lot more but the wind resistance is much stronger than You think it would be.
I am editing this video after a Brain injury I sustained recently, so I'm not seeing things exactly the same way I used to right now, I hope this video is edited well lol.
let me know what you think and wish me luck on posting more videos! these are pretty difficult sometimes.
Chapters
00:00 Intro
00:18 Building Jet Go-Kart
00:58 Rebuilding Jet Junk Go-Kart
02:11 Testing at 1st Track
05:52 End of 1st Test Run
07:00 Top Speed Test Location
07:48 Top Speed Run
08:41 End of Top Speed Run
Instagram: / warped.perception
Facebook: / warpperception
IMDB: www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and check out my other videos, Thanks!
By: Matt Mikka
@dapz 7 місяців тому
I was wondering about the top speed when i watched that original vid. Tbh i thought it would be a bit faster, i was able to get to 41mph on my own jet kart with a smaller engine and it was still accelerating, but i got sketched out.
@WarpedPerception 7 місяців тому
Yeah I think I remember that, I also thought it would have been much faster like over 80 mph. But it was definitely on the balance point and the wind resistance was definitely doing its thing. I think with some more aerodynamics it would have probably done 70 or 75, but honestly if I want to go faster I'll just put more engines hahaha.
@pitbullw2350 7 місяців тому
I saw a guy who was trying to break the world speed record with a RC car having to do a bunch of things similar to what would hold back the speed from air drag That dudes problem was tires, it’s prob a combination of road type and tires 40 mph with a jet engine is pretty sketchy, idk how the dude did 60 mph in one, I bet a pothole or bump is a nightmare
@jeronimoayala4757 7 місяців тому
@@WarpedPerception how much would it cost to build one of this i love to own one ? Would you guys build one sell it ? I would be interested in buying it
@LordSlag 7 місяців тому
@@WarpedPerception Please tell us the name of the awesome song playing at @1:00 !!!!!!!!!!!!
@matejzahajsky 7 місяців тому
@@WarpedPerception Aerodynamics are for people who can't build engines.
@Roboseal2 7 місяців тому
This man is the definition of; If it drives, put a jet engine on it. Rad.
@natsterjam 7 місяців тому
Colin Furze mate!
@fpstina 7 місяців тому
this channel always amazes me at the effort this dude puts into his projects... always 10/10
@mojo3008 7 місяців тому
@@DontReadMyProfilePicture.57 is this some kind of Russian nesting doll thing?
@feelincrispy7053 7 місяців тому
Yeah 100%, the amount detail in every little thing he does is crazy. So many other build channels are sketchy as hell and just try to hide it with editing
@htownblue11 7 місяців тому
Many people cannot appreciate what this man builds in his garage. Amazing stuff as always WP! And 50 plus mph is a cart is far faster than most can conceive. That’s smoking.
@WarpedPerception 7 місяців тому
Thanks, personally I thought it was going to go faster I thought I was going to get to at least 80. But that wind force is killer!
@WarpedPerception 7 місяців тому
Thanks! You know what's up. Tbh the disease is very painful at times, making things work well is hard, making things work great is very difficult most times.
@rian0xFFF 7 місяців тому
@@WarpedPerceptionwhat if you try adding some aerodynamics body to it
@michaelyoung1020 7 місяців тому
We run over 50mph with predator engines on small dirt tracks. Clones are 60+
@debbieroth2627 7 місяців тому
U should make me one
@CriticoolHit 7 місяців тому
I know you do stuff differently but I gladly would have watched 5 individual 25 minute long episodes of you building this thing.
@WarpedPerception 7 місяців тому
Thank you, I think about that every so often, but to be realistic I have a lot of videos to make, I'm so backlogged. I'm just trying to get on it now.
@kaboom362 7 місяців тому
Sick Matt.. I just showed my son your channel. It's probably the best channel he's ever seen. 😊
@jcims 7 місяців тому
@@WarpedPerception here’s another one for the backlog, completely unrelated to this. I haven’t found a single video on the Internet that shows the output side of a turbo when it’s being run by exhaust of an engine. Like how much air is coming out, and what happens when you start to constrain it with a nozzle? is it a leaf blower? Is it an air compressor, what’s going on there?
@thusarakapalliyeguru7655 5 місяців тому
@@jcimsThere is a video called "Actual working model of turbo charger" I think it's similar to what your looking for, not exactly but pretty close :)
@aimless9137 4 місяці тому
I have something to build and wonder if that engine and electrics are for sale somewhere that you could share the link?
@BiggMo 7 місяців тому
Praying for your recovery…. Glad your staying engaged with you passions. Take care
@WarpedPerception 7 місяців тому
Thanks.... I'm just glad I'm here and I'm still functional, brain injuries are no joke, like nothing I've ever experienced before super bizarre.
@HangryGiant 7 місяців тому
@WarpedPerception damn bro glad you're doing better, I know it's none of my business, but you know what they say curiosity killed the cat, do you mind elaborating a bit on why your injury happend? Did you fall and hit your head or crash or something like that? I really like your channel and can't wait to see future uploads :)
@waitemc 7 місяців тому
As always, above and beyond what we deserve in a vid. Thanks man
@WarpedPerception 7 місяців тому
😊
@superskullmaster 7 місяців тому
That drag behind the go-cart is also robbing the engine of ram recovery pressure. You need ducts that take the free stream air and direct it to the intake.
@WarpedPerception 7 місяців тому
Well these engines don't benefit from RAM recovery at all, if they don't get enough air, they stall
@bhess1212 7 місяців тому
@@WarpedPerception Now water injection? That may help! Might not be enough compression for that though
@BlueRice 7 місяців тому
i thought it would be sick if adds body panel that shape like a jet with the intake of F35 up infront to channel it to the jet engine. i wonder if it faster like that
@WarpedPerception 7 місяців тому
@@BlueRice that's exactly what I was thinking for the next build. I don't know how much it would help performance but it would look cool for sure.
@TobiasKornmayer 7 місяців тому
Nice build! Absolutely nice seeing you build the right stuff the right way! Thanks bro!
@WarpedPerception 7 місяців тому
Thank you... You know the details are tough!
@echobeefpv8530 7 місяців тому
That was crazy cool !! If you added aerodynamics of any sort, I'm sure you could increase the top end, but not by much. Not sure I would want to go much faster, without some crash protection, pads, etc., as any failure at these speeds would probably equal a hospital trip. Just a very cool project, all in all, and well done !!
@WarpedPerception 7 місяців тому
Yeah exactly, I completely agree.
@CryoToast 7 місяців тому
If he added some aero it could be a fighter jet.
@JustBadly 7 місяців тому
Now he's at 50mph the jet behind the seat will start to suffer reduced intake due to a low pressure region forming.
@yuvix 7 місяців тому
To be fair, I think there could've been a noticeable difference even if he had just tucked down.
@WarpedPerception 7 місяців тому
@@yuvix I agree, but My solution would just be add more engines lol
@BlueRice 7 місяців тому
this man put passion into it without knowing it. add finishing to the chair, wheel balancing and paint the chassis. this is quality workmanship just for a project that he do for youtube
@joellowery 6 місяців тому
How much does a jet engines cost?
@trevon4423 7 місяців тому
Felt like i have been waiting for this video for years now. Lol went to sleep a few time wondering what the top speed was going to be. I fully appreciate thr work you put into this and all you videos.
@WarpedPerception 7 місяців тому
I know, I'm always super late because I got a million things going on, but recently I sort of become more focused so hopefully I can keep some momentum on some videos here. Thanks!!
@TheLaser373 7 місяців тому
Great, as always, I really appreciate your detailed works!
@ryan49805 7 місяців тому
I love this channel!!! Wish you much success bro!!! 🔥💯🔥
@WarpedPerception 7 місяців тому
Thanks!! It's been really rough
@systemuser8701 7 місяців тому
It's interesting how you layed out the dawg as a blast shield !!!🐕
@Gyppor 7 місяців тому
These are great, I think you could get more content out of a lot of these builds if you did build videos. I know they take time, but there is so much involved in these and I'm sure we all want to see more!
@joshuagibson2520 7 місяців тому
Been missing your content, Matt. ALWAYS good shit. Keep em coming. Please.
@WarpedPerception 7 місяців тому
Thanks, I've been really tied up for the last year working on Mr Beast project, but as of July I'm back on my stuff, A few weeks ago I got sidetracked with an injury but I'm recovering now...it was insanely painful.
@travis.napier 7 місяців тому
Yes! Finally. So glad to see you back in the swing of content, keep this momentum please!
@WarpedPerception 7 місяців тому
Thanks I'm trying, it's been so tough, between doing and Mr Beast projects for months on end, and trying to get my stuff together, and then recently getting injured... Always something but I'm definitely going to try to keep momentum here, I love making videos.
@travis.napier 7 місяців тому
@@WarpedPerception I'm sure that Mr. Beast project was much more involved than it appears from how we see it through a screen. We know you love making videos! You've got this.
@WarpedPerception 7 місяців тому
@@travis.napier well I worked on at least 5 Mr Beast projects so yeah That's what it took so long. Not sure which one you saw.
@travis.napier 7 місяців тому
@@WarpedPerception Oh man, I'll have to look more then. I only saw the one jumping the school buses.
@pedromatajr8725 7 місяців тому
This is awesome! Next level content for sure.
@WarpedPerception 7 місяців тому
Thank you
@ProducerGio 7 місяців тому
Absolutely amazing! The fabrication, the upholstery, everything diy. I want to be like you when I grow up lol.
@MohammadHamad 6 місяців тому
Man this is such a nice video! So much progress and perfectly created with no drag or delay to make the video longer! PERFECT!
@WarpedPerception 6 місяців тому
Thanks I appreciate that, sometimes I wonder whether I should make the videos longer and more dragged out .
@KenjiThe1st 7 місяців тому
I'm just glad that you're back, bro. Awesome content as usual, keep it up! Get well soon.
@WarpedPerception 7 місяців тому
Thanks, I'm getting a little better everyday, my vision and brain function were the biggest hurdles
@alraybaca6235 7 місяців тому
Good to see you back
@HeisenbergFam 7 місяців тому
Bro casually came out of nowhere after 2 months as usual
@WarpedPerception 7 місяців тому
I know it's been tough, I was pretty much on schedule last year around this time but then I did a few projects with Mr Beast, I just finished those up in June, then I had to set up all my machines for all of the videos moving forward, then I had a brain injury a few weeks ago. But I'm recovering and back to making videos now. All I really want is a consistent upload schedule but these projects are extremely difficult and my life is insane.
@boeing777pilot5 7 місяців тому
These videos are always amazing to watch! Do you think that one day you would make a tutorial video/explaining the process of what you do to make these jet engines? I think it would be awesome to see the process.
@gloknor 7 місяців тому
Amazing and really cool kart! I can't wait to see whats next .Thanks for posting this .
@piuthemagicman 7 місяців тому
Love your projects! Very underrated, been following you for years. Greetings from far away Finland in Europe, keep it up! 💪😎👌
@Bemboo765 7 місяців тому
This man brings anything he thinks of to life
@Deeveeaar 7 місяців тому
What a great build! That seems like alot of fun to drive, nice engineering =)
@WarpedPerception 7 місяців тому
Thanks Man! To be honest I really didn't want to do this video, I wanted to go way more extreme, but I had to do it because I was curious and so was everyone else I guess. But the next couple GoKart videos are insane lol. I just don't think I'm going to be able to ride them because I recently had a brain injury.
@BiggMo 7 місяців тому
@@WarpedPerceptionyour fans appreciate having this for comparison before the next generation. Great video… Sorry to hear about the injury… I pray that it’s fully recoverable.
@Deeveeaar 7 місяців тому
So sorry to hear about your brain injury, hope you recover quickly! Can't wait to see what is next in store mate!@@WarpedPerception
@johnhutchison9782 7 місяців тому
@@WarpedPerceptionwasn't courtesy of one of your projects, was it? You do some outstanding things on this channel. 🤘best wishes on a speedy recovery. Peace, John
@My-Pal-Hal 7 місяців тому
HEY,.. HE DIDN'T SIGNAL HIS TURNS ! ! ! ... shots fired, shots fired 😳
@ejcrashed 7 місяців тому
Ohh man, yes!, your stuff is allways top notch!
@cyprex 7 місяців тому
Love the science and engineering!
@WarpedPerception 7 місяців тому
Thank you
@diyelectricbiker9361 7 місяців тому
That thing as a Hybrid would be even more awesome.. Amazing work.
@MrSeekaywhy 7 місяців тому
Truly spectacular!!!
@christopher.m.estelow 7 місяців тому
That was awesome!! I would love to see you add some aerodynamic additions/changes to see how much faster you can get it to go. I'm guessing if you can get the seat to lay back some, that alone could easily get it over 70. Great job and keep up the great work!!
@nathanieljames7462 7 місяців тому
That anodizing looks SICK bro!!
@WarpedPerception 7 місяців тому
It works so well And you can do pretty much any color you want if you do it yourself.
@nathanieljames7462 7 місяців тому
@@WarpedPerception You're a wizard, Matt! I love it!
@OmarDelawar 7 місяців тому
Need to do a twin jet setup next! Can’t wait to see the top speed on that!
@CarLoverPhotography 7 місяців тому
That looks like a blast
@ltaldoraine7305 7 місяців тому
Can't wait to see more jets added to this unit
@JoaoZagoSJC 5 місяців тому
Craziest but amazing to see. Great work dude.
@Shadobanned4life 6 місяців тому
Amazing ! Great work.
@u.e.u.e. 7 місяців тому
- improve the aerodynamics with some covers over the frame and the bottom - side skirts for groundeffect - add 2 vertical parallel fins behind (each) jet engine that are controlled via cables and the steering for giving you vector-thrust in tighter turns; if you have oversteer and you need to counter-steer the vector-thrust can help you to get the rear of the go-cart back on track 😉 *Nice project!!!* 😃👍
@adammartin4906 7 місяців тому
Awesome so glad you did a top speed because I was wondering what its top speed was, thanks for doing the top speed!!!
@WarpedPerception 7 місяців тому
Thanks, A lot of people ask me in the comments, and I was personally curious so it had to be done, I was supposed to have the next video out already but I had a brain injury a few weeks ago, it was hell no joke I can't even explain how intense the pain was for a week and a half straight non-stop no break, it was insane, but I'm back at it now
@spencer9190 6 місяців тому
Dude you are seriously talented and skilled. Blows my mind how much you know how to do
@quicksilverguy21 7 місяців тому
Can’t wait for 3 jets! Nice work!
@johnathanh9369 День тому
Cop casually drives by like a jet engine go cart is the least of his worries that day. Creative content is greatest!
@mariobrnabic4252 7 місяців тому
What a fantastic video. Love your stuff..
@WarpedPerception 7 місяців тому
Thank you
@alohabobbylaguna1702 7 місяців тому
A great Go Kart BUILD with a Jet engine
@Leonardokite 7 місяців тому
Everything you build is top notch Matt. Your kids friends must be envious!
@WarpedPerception 7 місяців тому
The little kids are always pretty cool, it's the adults I have issues with, I have people that are so mad at me for no reason at all that they don't even talk to me.. dead serious..
@Leonardokite 7 місяців тому
@@WarpedPerception That is sad my friend. But I guess that's just how some people are nowadays. 🤷♀ And yeah, kids are amazing.
@Mrkiki22 7 місяців тому
Bro killed the video again 🎉
@My-Pal-Hal 7 місяців тому
First Time Caller 😂 But just looking at the pictures. Extending the frame just a tad. And putting the outside engines, just so they warm the tires. Yeah, make them individually throttlable. You might get a cart that has an All Weather Capability 😂 ... and Sticky in the Corners 😏 From an old school aerospace guy. That actually worked with that Science Guy. I think his name was Speed Walker 😂 ... memories 👍
@markhavlicsek910 7 місяців тому
Cool video, I enjoyed that. I've always wanted to explore the possibilities of those small jet engines, and what better way to do it than with a go cart.
@OVERKILL_PINBALL 7 місяців тому
Your knowledge and skills are next level
@WarpedPerception 7 місяців тому
Thank you
@benjaminkenobi21 2 місяці тому
It sounds like a jet plane. It's actually a freaking jet! Fascinating
@ctdieselnut 6 місяців тому
Man, you do great work. A lot of very different skills. I was impressed just by the wrapping of the steering wheel lol. Some would make a video just of that, for you, its just a 5 second time lapse shot (which is cool too). I can appreciate the time it takes to make custom stuff like that. Let alone the one off cnc parts, anodizing, building/programming electronics, etc.. Happy i found this channel. You could probably make a separate channel just for 'behind the scenes' from leftover footage that gets cut/glossed over during a project like this.
@alexluke84 3 місяці тому
You are a scientist, top mechanic, driver, inventor...you rock 💪😎
@christophermarshall5765 7 місяців тому
Awesome mate!! Very quick. To decrease drag, enclose the front.
@AlexDeGruven 7 місяців тому
Definitely seems like independent rear axles is the way to go with the next iteration. Complicates braking a bit, but would give a ton of maneuverability improvements.
@waltervetri2476 6 місяців тому
Brilliant ,and the bonus you even explain the thrust drag stuff so simply Great video . Vetri South Africa 🙏🇿🇦🙏
@samsgarage1716 7 місяців тому
Great job it’s amazing.
@TheRealCCSmith 6 місяців тому
That was baddass👍made me nervous watching!
@htmmotoring 7 місяців тому
Wraped perfection 🎉
@WarpedPerception 7 місяців тому
Lol... Yeah unfortunately it's a disease I can't shake most of the time
@htmmotoring 7 місяців тому
@@WarpedPerception you killing the game my friend 🤘
@Aleks_Mechanics 7 місяців тому
Notification SQUAD!!! Have a nice weekend!🔥🔥🔥
@Adventure_fuel 7 місяців тому
That looks so fun.
@RobOnMotors 7 місяців тому
I randomly searched your channel yesterday for jet engine content as a reminiscer and suddenly this has appeared. Awesome!
@WarpedPerception 7 місяців тому
I just got back to it after almost a year of back to back Mr beast videos and then I had a head injury a couple weeks ago I'm now recovering from ☹️. I literally have like the worst luck
@RobOnMotors 7 місяців тому
@@WarpedPerception get better soon. I'll be ready and waiting for the next jet madness!
@WarpedPerception 7 місяців тому
@@RobOnMotors thanks.... I'm on it.
@Bemboo765 7 місяців тому
keep up the good work
@superskullmaster 7 місяців тому
Hope your injury isn't life changing. Keep up the good work.
@alraybaca6235 7 місяців тому
What happens did I miss something 🤔
@superskullmaster 7 місяців тому
@@alraybaca6235 read the notes/description
@WarpedPerception 7 місяців тому
How did you know about my injury?
@WarpedPerception 7 місяців тому
I recently had a brain injury, it's been an extremely insanely painful last couple of weeks... When I was in the ER I had a full dose of fentanyl and the pain was still there, But I'm currently recovering and I'm doing pretty good.
@superskullmaster 7 місяців тому
@@WarpedPerception you put in in the description
@jagman_singh 7 місяців тому
Awesome, Please make more videos on those Turbine jet engines-- Assembly, disassembly and most importantly Balancing! Maybe you could build a DIY balancer
@WarpedPerception 7 місяців тому
I'm going to, my backlog is very huge
@user-cj8ef8gt2g 6 місяців тому
I'm curious what the rpm came up to after the carb adjustment. By the way I want to say thanks for the hard work and time put into your unbiased reviews. Keep up the good work.
@kenny2644 7 місяців тому
Love ur vids!
@WarpedPerception 7 місяців тому
Thank you
@robertdecrock4038 7 місяців тому
Great work ❤
@topherwayne4398 7 місяців тому
Awsome video!!
@MaNNeRz91 7 місяців тому
Chinese cheap tyres will be a completely different compound of rubber. Harder. Longer to heat up. More difficult to keep the heat etc
@WarpedPerception 7 місяців тому
I found that out the Hard way lbvs lol.
@MaNNeRz91 7 місяців тому
@@WarpedPerception me too except I was in my 1985 mini in the rain 😂😂😂😂 I always buy a certain hankook tyre nowadays because of it 😅😅
@valveman12 5 місяців тому
That looks like so much fun!
@DadsGarageDiagnosticSpecialist 7 місяців тому
Nobody does it quite like you. Well done.
@robertdecrock4038 7 місяців тому
Awesome❤😊
@phasm42 7 місяців тому
That's gotta feel insane, going that fast just inches off the pavement.
@QuintonNG2000 7 місяців тому
Wow! I think a duct into the jets intake to take advantage of ram air at higher speeds would really help the peak thrust and top speed. Right now the jets intake is in a vaccum region which is fighting performance
@WarpedPerception 7 місяців тому
That's what u would think but these are turbo jets, They don't pull in as much air as you would expect, most of the power from these engines comes from the fuel, If they don't get enough air they stall, that's pretty much it. I do however wonder if an air intake would increase the efficiency. See because no matter what these engines are RPM based, they're going to dump fuel until they reach the target RPM or stall in the case of not getting enough air. I'm definitely going to experiment with that
@montesik 6 місяців тому
Amazing job!
@2HIGH59 6 місяців тому
One bad ass video loved the sound 👍🏻
@dr.toxicgamingmadscientist 7 місяців тому
It's guys like him that makes me want a Go-Kart myself, just to have a little something to get around on in my town and to get out and get some air every now and then.
@enginediy 7 місяців тому
Awesome
@unitimmy 7 місяців тому
I'd love to see if the single jet makes much more top speed with some ducts feeding it air. It seems like as the speed increases, inlet pressure would be dropping. It's possible the added drag ends up equaling the improved thrust, but it'd be interesting to see especially because it looks like when you have 3 jets there will be 2 operating in clean air
@WarpedPerception 7 місяців тому
Well these are turbo jets, they don't really benefit from ram Air too much. With turbo jets if there's not enough air flow or the air pressure in front of the intake is too low then the engine will stall. The speed here is too low I would think maybe over 150 or 200 mph there might be enough of a low pressure zone behind the seat to reduce the amount of air to a point where it could cause problems, these engines get most of their thrust from burning fuel And they are RPM based, So the computer will inject fuel to get to the Target RPM. As for the 3 jets I am building a completely different setup for that.
@rexturbo422 7 місяців тому
Well...this was incredibly cool. 🤔
@themanhimself3 7 місяців тому
He puts more love into a go kart than I do my entire car.
@jumpingjacks5558 7 місяців тому
That is a great little kart. I can't imagine what three of those motors would push you to. Question: I notice the jet engine is quite close to the air intake of the engine. I would venture to guess that there is possibly intake issues. I would think if you could build an air intake system for the front of the engine, you might be able to go even faster. Great video.
@WarpedPerception 7 місяців тому
It seems that way but this engine is a turbo jet, it won't really benefit much from any sort of RAM air, most of the thrust on these engines comes from the fuel, They don't pull in as much air as you think they do And the only time that location would be an issue is if you were doing 200 or 300 mph And it was creating a vacuum behind the seat. But if there were air intake issues those engines stall when they don't get enough air.
@shivprakash4996 2 місяці тому
You are amazingly skilled
@chrisclemmer809 7 місяців тому
Absolutely incredible work!
@travis.napier 7 місяців тому
Wow reading about your injury is a big deal, wishing you and your family a healthy and positive recovery.
@WarpedPerception 7 місяців тому
Thanks, it was insanely painful for almost 2 weeks straight, I can't explain how intense and unbearable the pain was non-stop continuous. But I actually made it and I'm currently recovering, all I can tell you is a brain injury is no joke, it's really hard for me to explain how you pretty much have no control over what your brain is doing.
@travis.napier 7 місяців тому
@@WarpedPerception I'm really sad to hear you had to deal with that and it's effecting you so heavily. If you can find the will to turn it into a positive experience and grow from it, I'm rooting for that. Hang in there brother.
@bozotheclown935 6 місяців тому
Pretty crazy setup specially with all that fuel and stuff in front of you. Just glad you didn't hurt yourself doing this. The sort of thing you should be doing at a racetrack with flame proof suits not on a back street somewhere. Anyway, good to see you survived it OK.
@GarageSupra 7 місяців тому
Could be a great video series idea: make a top speed salt flats jet go cart world record
@WarpedPerception 7 місяців тому
True but I'm sort of scared of doing any top speed anything, I mean it's cool for the books and the numbers but when accidents happen at top speed they are usually very bad.
@alimmaqsa 7 місяців тому
am glad for being one of the few first subscribers of this chanel 👅
@sebshine 6 місяців тому
Amazing!
@insAneTunA 7 місяців тому
It is pretty cool 👍
@RwingDsquad 7 місяців тому
This plus 3 more jet engines. Let’s do it.
@dmanm85 7 місяців тому
Having a personal water jet table comes in handy 😅
@WarpedPerception 7 місяців тому
It's the best !!!
@augustoschreiner9847 7 місяців тому
it's been a long time I was waiting for this new video, it looks the last one was 86 years ago
@WarpedPerception 7 місяців тому
I definitely feels like it was 86 years ago, unfortunately I had an brain injury which was no fun but I'm recovering and I'm back making videos thank God..
@JoelCreates 7 місяців тому
Awesome man, you went over the top with the finishing touches, was that seat alcantara?
@WarpedPerception 7 місяців тому
Thanks... Yes it is !!!! Good eye.
@hamsandwich1860 3 місяці тому
Those mini turbojets are so cool
@thundercatt5265 7 місяців тому
That is so cool
Суспільне Вінниця
Переглядів 345 тис.
Praendy
Переглядів 288 тис.
Зeлeный чaй
Переглядів 2,9 млн
Влад Закроев
Переглядів 2,2 млн