For a guy who said hes never done this before, made it look easy. Nice and clean!

You’re videos from start to finish are always therapeutic for me, amazing!

Great video, thanks for sharing. Didn't realize Trex made this thinner facia board - Great option! On our 4' wide gates I think I will Liquid Nails the backside stiffener bars to eliminate the screws showing on the front, especially because we want to run the 'wood' horizontally. Thx again

Your channel is my go to for gate styles that I've never done before. Thank you for the content you provide.

great job Jimbo, thank you for the video on how to assemble the entrance gate and I ask you for more. Greetings from Poland! 🙂👍🏻

This one really shows the methods of how to put together a gate simply. Definable a lot of time and work but the methodology is simple when explained. Looks great and most of all sturdy! Love the weld on hinges too btw

Wow! Those turned out really well, very surprised you didn’t have a little sag, great job.

Kudos to the flat-out outstanding craftsmanship. You are truly an artist sir. That gate is beautiful.

Nice job, those look great! Thanks for sharing Jimbo.

Great to see the install, awesome job as always

Beautiful finished job! I'm sure the customers were very pleased! 👍

Always enjoy watching and learning.

Very nice looking gates there Jimbo ! You have become quite the gate builder ! Thank's for sharing this video. God bless you and your family !!!

I really like to watch your videos and how u work. You pay attention even at the smalest pices of every project. I'm your truly fan from Bulgaria. Greatings! 🙂🤗

Nice work man and thank you for the explanation of the process!

Thanks for adding the install we appreciate it. Now I have to get busy on my gate.

That looks amazing.

You nailed it again Jimbo! Great job and you inspired me to build a similar gate to span my driveway. Any chance you can post a link to the weld-on hinges you're using? Thanks for the effort you put into producing your videos. Really enjoy them!!

Gorgeous gates. Excellent work.

I love your attention to detail. Nice job

Nice job. I’m just about to get some new driveway gates installed and it’s got me watching all these welding videos 👍🏼

Quality work Jim as always!

You do some awesome work! Thanks for sharing.

Outstanding craftsmanship!!

Jimbo should do more installing videos and concrete videos. I just learn so much in this channel.

I enjoyed watching the install, more of that would be great! Thanks for all your videos, very informative!

hello jimbo's my name is Yoel, I'm from Brazil, I wanted to tell you thank you for your videos, keep on being very constructive in my life, thank you and I hope one day I can meet you, a big hug from here in Brazil ...

Jimbo great job! I got one tip for you, prior to installing all the countersunk screws take a piece of cardboard and stick all the screws in it tightly together in some formation next to each other and then paint all the heads at once. it's easier and screwing them in won't damage the paint...

They are awesome! Great job

As always awesome job

Beautifully done!

Beautiful job Jimbo!! I have always liked the zero maintenance of the Trex.

I need to learn more from a guy like you, thank you sir

Wow best 20+minutes spend on youtube in a while.... what an awesome gate Jimbo.

Awesome work. The gate looks very nice. Love this type of video💪🏻

Great job 👏

Wow this was so helpful mister thankyou!! Doing my first composite double gate job and I'm so glad I watched this...and I thought I was the only one who never kept their grinder wheel flat hehe 😉

Awesome work Jimbo, the gate looks great! 😃👍🏻👊🏻

Señor, I'm going to use those hinges from now on!✌💯super

They look great, good job.

good choice using those bullet hinges, nice smooth clean look that matches your work. 👌🏼

That's and amazing result. Great job.

Really good job.....I like the hinges and your diy pins...keep going👍

I love this channel. Always Clean Work.

Very well done sir.

Nice attention to detail, you’re a real craftsman! I work with metal for a living myself. I’ve never watched one of your videos before. I don’t know if you have one, but I recently bought a Milwaukee metal circular saw. Works great for cutting those angles in the square tubing or cutting a long sheet. It’s fast and leaves a cool to the touch edge, don’t know how I lived without one. Also, I found for outdoor projects like your gate, that using a gloss black chassis car paint (like Eastwood) in a sprayer holds up extremely well. Saw palm trees in your video, I live in the snow and salt what up north so you probably don’t encounter the problems I do. Just thought I’d pass it along. Take care.

Beautiful Gates

Nice job again! I like to see your work and you inspire me thanks I'm from Quebec Canada

You do nice work, Jimbo!

Nice job looks great

Beautiful work. Thanks from Colorado.

fantastic looking gates jimbo,you always make it look so easy,all the best,and stay safe......................................dougie

Jimbo, I am a huge fan of yours and learn so much through your channel. Is there anyway you could tape a few videos on how weld and techniques that you have learned through the years? Maybe make it a series and I am sure that there are others that would like to see videos like this.

Excellent Been planning a new gate for many years now. Using the plastic wood is a great idea. Cheers

killer video!!!zero fat ,nothin but useable instruction...............Jimbo you are genius level

Real nice job Jim.

Good work jimbo

I love it wanted to do some thing like that at my house thanks for the idea

Great success. Very nice

Fantastic job. The homeowner just got value added to their property.

Love all the videos keep up the great work

Nice project Jimbo! Looks amazing. I was thinking, you could probably paint those screws prior to using rather than painting them after using them.

Got me using those hinges too, here in Ireland they are called cigar hinges and I use the ones with the grease nipples so I can just use a grease gun afterwards.

Nice job Man!

best welding channel ever!!!

Looks good. I would suggest using a flap sanding disk with the plastic backer to grind out the welds when you are finishing the “finish” sides of your work. You can see the impressions on this gate from using the t27. Even when it’s hanged. You’d be surprised how much easier it is using a flat disk and gives a seamless finish. Great work Jimbo, love your shop and channel.

jimbo que trabajo tan bonito .que talento, eres un artista, eres un maestro.gracias por tomarte el tiempo de enseñar tu trabajo

Looks good

Great Job

Job Weldone Jimbo

Great video , and great build on that you doing it well Sir

Good job I like the mixture of wood with iron

very great jimpos👍👍👍👍

Nice job.

Very good job indeed.

Nice video.It is really educative.

Hey @Jimbo's Garage ... regarding those screws on the front, if you have used maybe just a smaller head screw, and instead of sinking them flush, let it bite into the Trex material a little more - their decking screws would work great btw ... then instead of paint, you just run a heat gun on top of them and the hole closes up!

Great video and beautiful work! Only thing I would have done differently is weld the hinges the opposite of one another so you can’t just lift the gate off the hinges, I used to build dump bodies for a truck equipment company and we also used the same hinges. Always welded the hinges on facing the opposite direction of each other. Of course you would have to weld it up on site which makes things more difficult but it is added security.

Great looking gate! Thanks for showing the process of install, definitely helps out.

mitty fine job done there jimbo you have got some set of hands on u

The only thing I would’ve done different was put those boards on in through the tablesaw and rabbet offsetting edges so they could you create your own overlap. I noticed once they were hung you could see the light through the cracks of the doors. I just love your educational videos

Grande maestro....

very nice, greetings from Holland

Jimbo you are the man 👨

Like Choreography very well performed

Great job Thanks

Thats a great job!!!!!!

Love ur videos. Im gonna refurb my gate and make some improvements to it. It should look very similar to the one in video. Will be using composite panels. One thing i will do different is use coach bolts instead of screws.

Great build! Love your videos! Question... how do they intend on using the gate? I think it would be hard to open and close from the outside if this is their driveway. I assume this is a secondary entrance?

very good ! hello from country Georgia

The gate came out super nice. Boy that had to be heavy. Nice clean look and should last a real long time.

Look-n good!!

Thank you so much for adding all the links! You don’t just show us how it’s done, you point us in the right direction too. A true elder! Thank You!!!

Great work. Admire your detail, and very well communicated. Im looking for very same, in my metro Phoenix home. I prefer the all the same choices, metal, trex, etc., cept color. Thanks so much. Will look for bid from someone who can match your skill and style.

Damn nice work.

Awesome!!!

good job

👀😯 fair play mate this is nuts!

Wicked nice

Ótimo trabalho. Portão ficou muito bonito.