K989/969 RWD NEW KIT NO MOD NO 3D PRINTER LESS THAN $10 PART 1: INSTALL TIPS RWD DRIFT RC ACXWA 1/24
Переглядів 36,473
Рік томуQuick look at the brand new K989 RWD BOLT ON CONVERSION KIT From aliexpress FOR WL TOYS K989/969 QUICK INSTALL HUGE STEERING LOCK EASY TO INSTALL!
Please like, comment & subscribe! Part 2 coming soon! Electronics and running video!
Interested? Get one for yourself here:
a.aliexpress.com/_mPLN5fW
#k989 #k969 #wItoys #rc #rcdrift #rcdrifting #scalebuilt #drift #miniz #mini #rcshows #miniq #k989 #124 #124scale #rwd #rwdrc #rwdrcdrifting #beavershobby
@THESCALEDRIVER 8 місяців тому
For stock levels follow the creator of this kit here! m.aliexpress.com/store/1101494997?shopId=1101494997
@imy004 6 місяців тому
Cant see the item in your link
@THESCALEDRIVER 6 місяців тому
@@imy004 www.aliexpress.com/item/1005005726913953.html I wouldn’t even bother now, for the cost you would be better buying a DRZ
@imy004 6 місяців тому
@@THESCALEDRIVER thanks it looks interesting, i might try this too since i have 989
@Yaboibuster Рік тому
This looks interesting… can’t wait for part 2!! Good job!
@THESCALEDRIVER Рік тому
Thank you! Will be up as soon as possible, providing the kit works as well as it looks we will be adding some hop ups soon!
@milleraskew3067 8 місяців тому
@@THESCALEDRIVER make another k969/k989 video please!
@J2conceptsNewy 5 місяців тому
thanks heaps for the info and link I just ordered one 😝🤘
@THESCALEDRIVER 5 місяців тому
Nice man 🤘 enjoy it
@GNCRC 11 місяців тому
Patiently waiting on part 2!
@THESCALEDRIVER 10 місяців тому
Coming soon! I won’t be scheduling the upload I will drop it as soon as I’m ready, sorry for the delay :(
@THESCALEDRIVER 10 місяців тому
Part 2 is now live, part 3 has started recording
@GNCRC 10 місяців тому
@@THESCALEDRIVER cool, I ordered the part a few days ago, going to check it out now!
@Cheesicle_ Рік тому
worth a sub. now i need to find myself a k9 haha
@THESCALEDRIVER Рік тому
Much appreciated! They are super affordable on aliexpress at the moment! We are trying to get the part 2 ready but the esc has let us down! Will be up ASAP, it’s surprisingly decent so far though!
@danielemulazzi1615 10 місяців тому
Gran bella modifica ...bel video... ciao dall'Italia
@THESCALEDRIVER 10 місяців тому
Thank you sir 🙏
@Themtbkid Рік тому
Awesome video thanks man. Looking forward to part 2! Are there any other body’s that fit this chassis?
@THESCALEDRIVER Рік тому
Thank you! Part 2 has been slightly delayed due to bad electronics 😂 there are quite a few that fit the stock wheelbase, the Tamiya rx7, mx5, Impreza 22b are three that I have tried so far. If you extend the chassis you can fit some really nice stuff! I have the extended wheelbase chassis and a couple of body’s ready to go for part 3 😄😄😄
@Themtbkid Рік тому
@@THESCALEDRIVER damn! I’m invested as! I’m in for the long haul I look forward to more vids!
@THESCALEDRIVER Рік тому
@@Themtbkid all being well I will have a running video up by the weekend 😁
@THESCALEDRIVER 10 місяців тому
Part 2 is now HERE: K989 RWD CONVERSION KIT PART:2 BEFORE YOU BUY! FIRST RUN IMPRESSION! ukposts.info/have/v-deo/joV3p36qioCpmKc.html Part 3 is in the works and will drop soon!
@joesmith7519 8 місяців тому
Are you still using this kit as part 3 seems to have a mono shock ?
@THESCALEDRIVER 8 місяців тому
@@joesmith7519 I’ve not done much with the kit recently, need to finish part 3… it’s about 50% done 😅 I am using the kit still yes but I have started to modify the top arms so you can mono shock it that bar system doesn’t work
@GeckoRC 8 місяців тому
Great!! But link isn't working anymore :( Could You search for another? Or can You give a description/name of the needed parts? Thats so cool. Thanks a lot !!
@THESCALEDRIVER 8 місяців тому
Just found this amazing item on AliExpress. Check it out! ￡15.97 30％ Off | WLtoys K969 K989 284131 large steering angle mod rear-wheel drive a.aliexpress.com/_mLfQetu
@GeckoRC 8 місяців тому
@@THESCALEDRIVER WOW, so cool Thanks a lot!!! And greetings from Germany 🤩
@GeckoRC 8 місяців тому
@@THESCALEDRIVER Oh shit... this shop doesn't deliver to Germany.. :(
@t3floz 5 місяців тому
Nice video! Does this work with monoshock? Would still like to have supesnion in the front :)
@THESCALEDRIVER 5 місяців тому
You can fit a mono yeah, the plastic is abit tough but it’s possible
@EXTRA_SLIDEZ 9 місяців тому
the link no longer works could you please provide a different one?
@THESCALEDRIVER 9 місяців тому
I’ve updated the link twice… I think the seller has closed the listing, it will be back at some point I’m sure
@JustRCCrazy Рік тому
I ordered 2. I don't see where the front shocks go. It doesn't eliminate the front shocks, right? Are there instructions for adding a shell mount? Thanks again.
@THESCALEDRIVER Рік тому
Yes it uses a sway bar instead, it seems ok, but I have an idea for a mod if it doesn’t work out 💪
@JustRCCrazy Рік тому
@THE SCALE DRIVER RC I'm on board! I'm glad I found you and your channel today. Please keep up the good work.
@THESCALEDRIVER Рік тому
@@JustRCCrazy thanks man! Means a lot, genuinely love the K9 platform, well, rc in general but for the money, they are so much fun!
@trojan3045 11 місяців тому
How do you remove the driveshafts from the front wheels?
@THESCALEDRIVER 11 місяців тому
You remove the wheels slide the drive shaft out, remove the black ring on the rear and push out the pin and the drive shaft will drop out, keep them safe and you have spares for the rear 😃
@JustRCCrazy Рік тому
My bad, I didn't watch the entire video. What can you expect from an old man? Hahaha. Thanks for the tip and your patience. At least you got a new sub for the hassle I gave you. Take care.
@THESCALEDRIVER Рік тому
Not a problem! Thank you for the sub! I will hopefully have a running video of this kit early next week! To complete the conversion I imagine it will need a gyro for the steering. I am in no way affiliated with this product so I can’t comment on the performance until I have hands on experience with it. It’s looking promising though this far 🤟
@JustRCCrazy Рік тому
Good tip! But does the car have to be a RWD for this to work? Or can it be done on the AWD too? Thanks!
@THESCALEDRIVER Рік тому
The kit is for Rwd use only, it replaces the front bulkhead and diff unit
@JustRCCrazy Рік тому
@@THESCALEDRIVER I just noticed that. Do you happen to have or know of a RWD mod? Unfortunately I do not have a 3D printer. Thank you.
@THESCALEDRIVER Рік тому
@@JustRCCrazy look in the bio here mate it’s a pre printed kit, just bolts right up
@JustRCCrazy Рік тому
@@THESCALEDRIVER Your BIO? Thanks a lot!
@JustRCCrazy Рік тому
@@THESCALEDRIVER I can't find it. Sorry, but can you post a link perhaps? Thanks!
@loudiniowatooloud2305 8 місяців тому
Locked or open rear diff?
@THESCALEDRIVER 8 місяців тому
I have tried both, locked diff in my opinion is better with the k9
@wizardbrand1 11 місяців тому
I just installed this, I think I'm having grip problems with my front wheels.
@THESCALEDRIVER 10 місяців тому
I’m working on a part 2 my dude, keep your eyes peeled going to try get it out by this weekend if I can 😃
@danielemulazzi1615 10 місяців тому
Dove si può acquistare questo kit di conversione???... bel video...
@THESCALEDRIVER 10 місяців тому
Link in description bro
@michalbelicka2247 2 місяці тому
the link in the description is not working can u send me another link please
@THESCALEDRIVER 2 місяці тому
Just to make this clear to anyone wanting this product… I am not affiliated to the seller or this product, the current cost of this conversion is why I have put a stop to this series. The original kit was extremely afforadble Just found this amazing item on AliExpress. Check it out! ￡12.39 47％ Off | WLtoys K969 K989 284131 large steering angle mod rear-wheel drive a.aliexpress.com/_EIztsNL
@user-hl3co5pz2z 9 місяців тому
หาซื้อจากไหนครับชุดเลี้ยว
@THESCALEDRIVER 9 місяців тому
Link is In the description- be aware they have increased the price now :(
@trojan3045 11 місяців тому
How do you remove the driveshafts from the front wheels?
@THESCALEDRIVER 11 місяців тому
You take the front wheels off slide the cup out of the hub, then remove the drive pin out of the back of the axel
@trojan3045 11 місяців тому
@THE SCALE DRIVER RC thanks man.....also I wanted to know whether a gyro would be abs necessary for a drift build
@THESCALEDRIVER 11 місяців тому
@@trojan3045 for a Rwd conversion you will need a gyro
Суспільне Чернівці
Переглядів 203 тис.
Ветерани космічних військ
Переглядів 710 тис.
MAX RC
Переглядів 39 тис.
Неля Лотоцька
Переглядів 155 тис.
Tokparty
Переглядів 3,3 млн