LIEBHERR LTM1750 - 9.1 with 56m Luffing Jib Setup | Part Two

  Переглядів 452,213

SG Heavy Vehicles

SG Heavy Vehicles

6 місяців тому

Here is the LIEBHERR LTM1750 - 9.1 from Peck Tiong Choon being rigged with 56m of Luffing Jib on a closed road of Singapore. It's being used for the dismantling of a tower crane.
CAMERA GEARS I USED:
=================================================
CAMERA:
Canon EOS R50 - amzn.to/3KWhgn3
Canon RF 24 - 105 f/4L - amzn.to/47J8IK9
Mic:
RODE VideoMicro - amzn.to/3OYxqNU
=================================================
Like my video? Please give a like and subscribe to my channel!
/ sgheavyvehicles
To see more photos of such heavy cranes in action, please visit my good friend’s page on Flickr too!
flickr.com/photos/30298424@N0...
-Find Me On-
Tiktok: www.tiktok.com/@sgheavyvehicles
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I provided, I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel!
#mobilecrane #crane

КОМЕНТАРІ: 78
@wearefarmersusa
@wearefarmersusa 6 місяців тому
I never get tired of watching these incredible heavy machines in action. It's like poetry in motion!
@SGHeavyVehicles
@SGHeavyVehicles 6 місяців тому
Couldn't agree more!
@jimmackey2909
@jimmackey2909 5 місяців тому
This is the type and length of video I've been hoping Liebherr would produce. Thank you for your attention to detail and great camera angles. Very much appreciated.
@SGHeavyVehicles
@SGHeavyVehicles 5 місяців тому
Glad you liked it!
@normanjones8089
@normanjones8089 6 місяців тому
Operating cranes is one of the most satisfying jobs in the world. I have run cranes for the past twenty-six years and can truly say that once people get a job doing this, they will not want to do anything else except maybe rigging, which is equally important.
@xraylife
@xraylife 2 місяці тому
I have only operated a Tadano 25 ton RT twice when the drivers let me have a go (Asia). We were lifting concrete in a hopper and its very careful work in case the hopper swings out too far and takes the crane outside of its limit. And I drove one around the site on another day, first gear so low but when that second gear comes in the surge forward with the torque is like WoW unexpected. Overall its a job with constant danger and not for the faint hearted!
@tillross4078
@tillross4078 Місяць тому
Yes this is True
@normanjones8089
@normanjones8089 Місяць тому
​@xraylife You are absolutely correct there about the dangers that can occur unless the operator has been properly trained and schooled before there is time spent in the seat. One never learns too much and they should never think that they've got it under control, because thinking so can come back to haunt them in the end. I learn new things every single day and listen to reason when others try and tell me things that could lead to unsafe situations.
@markbickelhaupt4414
@markbickelhaupt4414 3 місяці тому
A truly magnificent beast of a crane! 💪 Stong and yet delicate 🕸️! A very complicated machine! Excellent Video 👍👍👍Great work!!!
@SGHeavyVehicles
@SGHeavyVehicles 3 місяці тому
Thank you! 👍
@pavelvilsov2437
@pavelvilsov2437 6 місяців тому
how smoothly they work , it is very interesting to observe such processes in general😊😊
@superemile999
@superemile999 6 місяців тому
Thanks for making this professional video! You put a lot of effort into it and I enjoyed the video!
@SGHeavyVehicles
@SGHeavyVehicles 6 місяців тому
Glad you enjoyed it!
@ericricomanche2029
@ericricomanche2029 6 місяців тому
6
@Damien_owner.of.channel_
@Damien_owner.of.channel_ 6 місяців тому
thank you for part 2 i have been looking forward to this for so long
@SGHeavyVehicles
@SGHeavyVehicles 6 місяців тому
Hope you enjoyed it!
@robertwagner8596
@robertwagner8596 5 місяців тому
good job to all involved,thanks for sharing
@donjuan6802
@donjuan6802 5 місяців тому
Saya juga bekerja di perusahaan swasta yang menyewakan tower crane,tapi jenisnya adalah comansa,LCL 500 di indonesia. Sungguh sangat luar biasa alat yang satu ini.
@Dountman
@Dountman 6 місяців тому
After all that steel, it’s just a bunch of pins holding it all together. 😂
@aidanbrennan7389
@aidanbrennan7389 2 місяці тому
Great video. Greetings from Dundalk, Ireland.
@SGHeavyVehicles
@SGHeavyVehicles 2 місяці тому
Thanks for watching!
@ridhobaihaqi144
@ridhobaihaqi144 6 місяців тому
For my saturday night. Thank you!!
@dmacdonell
@dmacdonell 6 місяців тому
Great video! I love your content, thanks for sharing.
@SGHeavyVehicles
@SGHeavyVehicles 6 місяців тому
Thanks for watching!
@brandonoswald2392
@brandonoswald2392 6 місяців тому
This is so fascinating to watch.
@scottholman3982
@scottholman3982 3 місяці тому
You should see the really big cranes! Mammoet has built some ring cranes taller than this one which can lift hundreds of tons. The technology has advanced tremendously over the last 40 years. The use of counterweights is now standard, and luffing jibs are seen everywhere.
@SGHeavyVehicles
@SGHeavyVehicles 3 місяці тому
Mammoet’s Ring cranes can lift in the thousands, not hundreds 😂 Unfortunately that was never seen here in my country
@Tedinoz
@Tedinoz Місяць тому
I would have thought that THIS crane was an example of advances in technology over the last 40 years. Yes, the Mammoet cranes are extraordinary but, if I recall, they are designed for use in VERY highly specialised circumstances. By comparison this crane is adaptable to many situations.
@SGHeavyVehicles
@SGHeavyVehicles Місяць тому
@@Tedinoz It’s a very different kind of crane for a different purpose. It’s designed to be very mobile and versatile, but at that expense comes the lack of capacity compared with those heavy cranes.
@ShaneSteel-om2cr
@ShaneSteel-om2cr Місяць тому
You can not set up a ring crane in the middle of a city
@jickmccivy6327
@jickmccivy6327 3 місяці тому
The company I worked for has streamlined this process we pick and pin boom sections straight from the truck during assembly and use the outriggers to tilt the carrier and extend the crane boom to keep tip and the sections as close to the ground as possible , we can do in minutes what's taking these guys hours
@SGHeavyVehicles
@SGHeavyVehicles 3 місяці тому
You got me trying to figure out how you guys tilt using the outriggers 😅😅
@faizalpaiman4433
@faizalpaiman4433 6 місяців тому
Nice video from start to end.. love it .
@SGHeavyVehicles
@SGHeavyVehicles 6 місяців тому
Thank you
@ryanburbridge
@ryanburbridge 5 місяців тому
That is an epic crane.
@Kraber50
@Kraber50 5 місяців тому
Irgendwie habe ich das Gefühl, dass dieses Männer diesen Kranaufbau noch nicht allzuoft gemacht haben !!! Und ich habe auch noch nie gesehen, dass die Kontergewichte ungleichmäßig verteilt werden. Somehow I have the feeling that these men haven't done this crane construction too often !!! And I have never seen the counterweights distributed unevenly.
@olivertaylor8788
@olivertaylor8788 2 місяці тому
EXELENT VIDIO.THANK YOU
@user-lh5tq9ik4k
@user-lh5tq9ik4k 3 місяці тому
The wind mills use some really tall ones
@nalinmadushanka3867
@nalinmadushanka3867 3 місяці тому
I want to know plz how is the boom angle when machine working I mean main boom angle and telescopic boom length?
@leejohn7366
@leejohn7366 6 місяців тому
But was a fantastic opportunity to watch
@jeritupang.jt.6259
@jeritupang.jt.6259 6 місяців тому
Mantap bosku
@ngweitong
@ngweitong 6 місяців тому
did you video the process of the tower crane disassembly?
@SGHeavyVehicles
@SGHeavyVehicles 6 місяців тому
Unfortunately no.
@jeritupang.jt.6259
@jeritupang.jt.6259 6 місяців тому
Alat yang sangat canggih.
@olivertaylor8788
@olivertaylor8788 2 місяці тому
THOSE ARE SOME LONG CABLES
@giancarlog9130
@giancarlog9130 2 місяці тому
Bel video. 👍👍
@chuckmvs
@chuckmvs 4 місяці тому
Did i remember to put that clevis pin in ?🤔🤔
@ainolman2430
@ainolman2430 6 місяців тому
Monster crane
@paulthesoundguy1
@paulthesoundguy1 3 місяці тому
So they use a small crane to assemble a bigger crane…then the bigger crane goes and disassembles an even bigger crane…😁😁😁
@harriertan1595
@harriertan1595 6 місяців тому
One of my relatives work at this company
@Jeff-bg7pt
@Jeff-bg7pt Місяць тому
Two many cooks spoil the broth
@Abdulsahafi-jp7ky
@Abdulsahafi-jp7ky 5 місяців тому
Lukkingh from Tamil Nadu india 🇮🇳 n. Mobil Crane Operator. ABDUL JALEEL SHAFI
@swagzoneus
@swagzoneus 4 місяці тому
Stone crushers, classified as heavy machines, play a crucial role in minimizing environmental impact by efficiently repurposing extracted rock into valuable materials for construction.
@naserakbarian4573
@naserakbarian4573 2 місяці тому
محل اجرای طرح را اعلام کنید
@jeritupang.jt.6259
@jeritupang.jt.6259 6 місяців тому
Hadir dari indonesia
@Goldarr1900
@Goldarr1900 5 місяців тому
A crane, to assemble a crane, to disassemble a crane. 🤔
@Abdulsahafi-jp7ky
@Abdulsahafi-jp7ky 5 місяців тому
LiEBHERR LTM.10100.ton.52.meetar
@user-qr7nb7zg2x
@user-qr7nb7zg2x 4 місяці тому
11:51
@xraylife
@xraylife 2 місяці тому
Could you crawl under the power pack next time and get more detailed shots while the weight cradle is being lifted up into place? 😂😂
@SGHeavyVehicles
@SGHeavyVehicles 2 місяці тому
I can try
@xraylife
@xraylife 2 місяці тому
@@SGHeavyVehicles I was joking - but yes more safe shots would be great!
@SGHeavyVehicles
@SGHeavyVehicles 2 місяці тому
@@xraylife Haha i see what i can do!
@jimprescott8423
@jimprescott8423 5 місяців тому
Where is this?
@SGHeavyVehicles
@SGHeavyVehicles 5 місяців тому
Its in Singapore!
@jickmccivy6327
@jickmccivy6327 3 місяці тому
This is what happens when you give your kids an erector set for Christmas when they are about 5 years old they don't grow up they just get bigger toys .
@SGHeavyVehicles
@SGHeavyVehicles 3 місяці тому
Thats right! True passion never die 😁
@victimovtalent6036
@victimovtalent6036 Місяць тому
why not chinese made crane?
@hacktester69
@hacktester69 4 дні тому
because germany made crane is better
@VaporheadATC
@VaporheadATC 5 місяців тому
All this just to lift a Playstation 5 to the 400th floor.
@StanleySchmengie
@StanleySchmengie 4 місяці тому
So....a crane put together a crane that took apart another crane!
@markweiss7538
@markweiss7538 Місяць тому
Can't watch, that background noise is terrible
@alonewoof8769
@alonewoof8769 3 місяці тому
European technology. Go away
@elvahendri1916
@elvahendri1916 4 місяці тому
Made in china
@genemartinelli5645
@genemartinelli5645 2 місяці тому
Sorry Charlie, made in Germany
@herobrinehacks8141
@herobrinehacks8141 3 місяці тому
I saw the assembly of these as a replica with workers and small tools. 🏗 🚧 👷
@samgolin7629
@samgolin7629 6 місяців тому
在新加坡…… Singapore
Fixed Jib Night Job for LIEBHERR LTM1500 - 8.1 | 1 Hour Video!
56:05
SG Heavy Vehicles
Переглядів 439 тис.
顔面水槽がブサイク過ぎるwwwww
00:58
はじめしゃちょー(hajime)
Переглядів 71 млн
Маленькая и средняя фанта
00:56
Multi DO Smile Russian
Переглядів 1,7 млн
😨Новая Война в GTA 5 Online #shorts
00:40
King Dm
Переглядів 1,7 млн
Liebherr LTM 1750-9.1 from BKV #liebherr #LTM1750
3:51
Tristan Crane vlogs
Переглядів 33 тис.
Davis Crane liebherr ltm1400 set up and work, ( Full video )
14:04
jason nikl
Переглядів 118 тис.
Amazing Modern Bridge Construction Process!Large-Scale Bridge Factory!
19:21
Máquinas Increíbles Que Operan A Otro Nivel
26:48
Calmar
Переглядів 4,2 млн
Setting Up LARGE Mobile Crane in the Heart of Singapore | LIEBHERR LTM1500 - 8.1
1:20:50
Asiagroup | Terex AC1000 HA50 luffing | Counterweight Setup
19:52
SG Heavy Vehicles
Переглядів 194 тис.
Шлем пилота F35 дороже Феррари 🤑
0:55
Огневой Вал
Переглядів 706 тис.
Crash test Audi A6 beamng drive #shorts
0:41
Naladfe
Переглядів 15 млн
Грузовик-монстр Тонар-7502 #тонар #грузовик #якутия
0:12
Алексей Жирухин / Путешествия со смыслом
Переглядів 477 тис.