Follow along as I Linebore a rear idler wheel shaft on a D-9 Dozer. There arent too many videos on lineboring so hopefully this does it some justice. Enjoy.
КОМЕНТАРІ: 1 200
@headhunter44882 роки тому
Whatever you charge it is not enough. A machine that size being down and repaired in the field saved that company a boat load. Your skill is amazing. Waiting for your next video. Adios
@JasonJonesPhotography2 роки тому
Can you imagine what the "tow bill" would be just to haul it who knows how far to a Cat dealer? And then theyd prob want to replace the whole track runner on that side at an exhorbent cost (and probably weeks of downtime too). I really feel like this is one of those jobs, you quote your rates, then triple it just for the lifesaving effort you delivered to the operator of that machine, and it would still be well worth it to them, and cheaper.
@SuperSecretSquirell2 роки тому
@@JasonJonesPhotography not necessarily. I work for a CAT dealership and we have a field welder/line bore guy. Yes, he would prefer to do it at the shop but can easily accomplish it in the field.
@PAYNEKILLER..2 роки тому
@@SuperSecretSquirell Poppycock! Your CAT employed line bore guy would look at that and say "Piece of cake, that's easy" even if he did say that and fix it easy he'd be an anomaly to say the least. The above comments are not far off from my experience.
@markfryer98802 роки тому
@@SuperSecretSquirell Your guy must be a rarity amongst CAT Dealers site service personnel. Most of them are just bolt-on, bolt-off, kinds of people.
@mattdillon43982 роки тому
These kinds of repairs are always done in the field! It's very common. Do you think he should deliberately overcharge the company because they're rich? I'm sure he charges what he deems his skill is worth.
@giggiddy2 роки тому
Can't say I've ever seen anyone operate in the field at this level. This man is truly gifted where welding machine work comes in.
@brustar51522 роки тому
He's not just a welder. He's managing to encompass a couple of trades in that on-site machining process. Kudos to him and sincerely hope he demands what he's worth for that type of work.
@chadkennedy5292 роки тому
Yep he's good at what he does... however there are a lot of guys doing what he does and at the level he's doing it. It just takes a lot of experience and money for the tooling.
@mikeznel60482 роки тому
It's quite common actually.
@GT-432 роки тому
It's not that unusual when you work on a construction site everyday with heavy equipment like this running around. There always seems to be one guy on every job that is bad ass at fixing very broken shit.
@markfryer98802 роки тому
@@GT-43 Probably because he has a lot of mates working with him who are bad ass at breaking stuff!.
@Akfordmn2 роки тому
Bolt extraction was next level genius! Then you break out the Mobile Line Boring Machine...WOW!! Well done...
@CuttingEdgeEngineering2 роки тому
Been hanging out for this video! I think the customer got his moneys worth out of that part 🤣 Top notch repair mate as always 😎👍
@jimsvideos72012 роки тому
You can learn something from anyone, but you can learn a *lot* watching this man work.
@jerrycann63742 роки тому
I was watching the repairs been made and I was thinking what CEE would think of it. It's amazing what both of you do with the repairs you accomplish.
@xoxo2008oxox2 роки тому
@@jerrycann6374 Me too, for CEE. I recall that video where he's setting up this rig...Sir Meccanica and a CAT789 part and that IC needs one of these...but actually doesn't!
@chrisbolton49002 роки тому
I was thinking of some of your video while watching this one.
@n7565j2 роки тому
Was just going to comment how I'd seen this type of repair on your channel... You're both top notch in my book!!!
@terrminatoragain4612 роки тому
Isaac, I could watch your videos all day,every day,thanks again for your craftsmanship 👍
@ICWeld2 роки тому
I appreciate that!
@JoeAroner-SIWAYTV2 роки тому
@@ICWeld thank you for putting up the shield for the camera. It was cool to see the arc while you were welding.
@scottl4852 роки тому
@@JoeAroner-SIWAYTV Yes, and it worked very well.
@jondavidmcnabb2 роки тому
That qualifies as a pretty damn incredible field repair.
@opendstudio71412 роки тому
This required more tooling and time of course, but that trailer king pin repair he did was incredibly difficult and awkward compared to this repair.
@MustObeyTheRules2 роки тому
@@opendstudio7141 where is that video? I don’t see one.
@opendstudio71412 роки тому
@@MustObeyTheRules The title is "Try this with a torch": ukposts.info/have/v-deo/bZ6Fg49veWqJuGQ.html
@MrRaincoast2 роки тому
The guys who are the top of their game usually talk about it like it's no big deal what they're doing, but that was pretty incredible.
@MustObeyTheRulesРік тому
@@andraecarter76 no ones hating dumbas$. I asked for a link to watch another the video
@gregwarner37532 роки тому
Welding an extension to a buried broken bolt from the inside of a piece of pipe is something I never thought of. Great technique.
@garymucher95902 роки тому
I'm still amazed how such repairs can be accomplished in the field. Nice job. Thumbs Up!
@howder19512 роки тому
I worked as a millwright and I had a shift partner like you, he could fix almost anything with a welding machine, awesome talent, enjoyed the vid, cheers!
@muimasmachoРік тому
Lemme guess. Gorden W ???
@yt6502 роки тому
I enjoy watching a man at the top of his game. I always wonder how the hell did things get this bad before they decided to fix it or even discover it. But then I always remember I have a really good business as you do because of these circumstances.
@Rx7man2 роки тому
I think once that idler bearing piled up it didn't take long to eat that out, perhaps just a couple hours
@josimon62292 роки тому
This should easily be one of the most popular welding/machine repair channels on UKposts. Incredible work in rough conditions.
@ICWeld2 роки тому
Glad you liked it!
@Abom792 роки тому
Love your broken bolt removal technique! I’m looking forward to trying that myself one when the right job comes in. Awesome repair man! 👊🏻
@jorgyr362 роки тому
Your channel is why UKposts suggested this one! It is funny that in my head I was using your voice to describe the machining part of this video!
@hardwareful2 роки тому
@@jorgyr36 I C Weld I click like :)
@Zerostar3692 роки тому
Abom!
@getchasome62302 роки тому
Yeah that was so satisfying to watch it come right out. Anyone who's ever dealt with a broken bolt knows what that means
@miko57wang2 роки тому
Its funny how while I was watching his bolt removing technique, I started thinking how if this would have worked on the video where you drilled out the broken and stuck bolt and then finding you in the comment section.
@brianwood74802 роки тому
As an industrial electrician I've had the pleasure of working with a few welder/fabricators like yourself, and even at 72 , I never get tired of watching this kind of craft-art work. Very nice job Sir.
@dennisholst4322Рік тому
I'm 74 operator a guy Line bored the dead axles on my old D7E 68 model dozer didn't fail
@RustyRogers2 роки тому
For us welding noobs this is next-level genius.
@deadslow2012 роки тому
Mars-level genius.
@GT-432 роки тому
Yeah I'd probably keep that to myself lol.
@keithhill91382 роки тому
One great thing about your job is it never gets borring because its never the same problem. It's challenging every job!
@corydriver76342 роки тому
I know absolutely nothing about this type of work but it was fascinating to watch.
@byronlabelle75692 роки тому
As a machinist & instructor of the trade I always advise students to take welding courses also here at our community college. I am very proud of you IC weld & CEE Australia for having very interesting & educational YT channels. Keep up the good work.
@ICWeld2 роки тому
Thanks for sharing
@gibsonbuilds48412 роки тому
Wow. Great fix! I literally yelled out loud with amazement "No way" when that bolt started turning out of there. I would say luck...but it's obviously skill.
@markfryer98802 роки тому
It's always like that when you first see it done! Then it just makes so much sense as being a really good way to fix the problem.
@davidmunro14692 роки тому
Wow I really enjoy this learning experience. Tools are just metal until they are in the hands with knowledge. Well done.
@venenareligioest4109 місяців тому
Who loves tradesmen who look at a disaster and say, as Isaac does, ‘uh, not too bad’ 👏🏻👏🏻👏🏻
@PoteauCowboy2 роки тому
You have many skills. Area is fortunate to have you available for repairs. Educational and enjoyable.
@donbullock87902 роки тому
It's always nice to watch a pro at work. You can tell how much of a pro they are by how easy they make the job look. I'm sure that you are in high demand due to your talents. Thank you for a great video.
@BarnStangz2 роки тому
I can't wait to show my 75 year old father this. He use to work for Lincoln Electric and has been in the welding / fab field for a LONG time, he'll really enjoy seeing a true master like you. Very nice work.
@MrYukon20102 роки тому
Man, I have so much respect for the way you are working. I've seen UKpostsrs with huge shops and all the tools you can possibly imagine and still are not as creative as you are or as determined as you are to get the job done. You have yourself a new subscriber because you are a joy to watch.
@ICWeld2 роки тому
I appreciate that!
@BruceBoschek2 роки тому
I couldn't believe this! That is not normally a field repair! In addition to being a top notch welder this man is a contortionist, reclining in a cat-like position underneath the part. On top of it, the video is excellent and one can really learn from it. Thank you, Isaac!
@mattdillon43982 роки тому
Yes it is! They repair these types of things in the field all the time!
@hgbugalou2 роки тому
Good lord, my jaw dropped a little when that sleeve stuck in the slot you machined all on its own. Talk about a perfect fit, in the field no less. Nice work.
@maverick50062 роки тому
I follow Isaac's channel and Kurtis from CEE and it is amazing to see these two professionals work. One in the field (mostly) and one in the shop. Both with the same skill set and half a world apart!!
@brustar51522 роки тому
Dear gawd! I was a recent graduate (1965) of the Royal Canadian Navy's Engine Room Artificer program, working after my hitch release for Hafer Tool and Fabrication co. in Victoria B.C. I was approached by them to perform that exact process to a mine shaft elevator headstock pulley shaft at Morphee Lakes in the B.C. interior. The multiple ladder/landing climb up to that shaft was bad enough but having to hand haul the equipment and a power cord up there at the end of 150' of rope was exhausting. Performed the job, reassembled the headstock and assisted the mine workers to re-string the elevator cables then waited on site for an inspector to approve the elevator for operation. Got a heck of a bonus cheque for that job and had all but forgotten about that nightmare operation until watching your vid. My back started aching all over again! Nice job.
@ICWeld2 роки тому
haha sorry about that. :)
@paulcharman442 роки тому
This repair is impressive when Kurtis, Cutting Edge Engineering does it in his workshop, but doing it in the field, another level entirely. Respect
@SouthMainAuto2 роки тому
😲 that was a really neat repair. Thanks for sharing the process!
@getchasome62302 роки тому
Hey bud, I watch your channel too! Love your content
@ebat-kopat-tj2ef3ve2r2 роки тому
You are a guy with GOLDEN HANDS. Greetings from Russia .
@benjigray86902 роки тому
Thank you for making this video. I can almost hear the conversations, before you arrive on site "This is major!" "Don't worry, I'll call a fellow that I know." "He can fix anything, stand back and watch, there's always the danger that you might learn something" I always learn new tequniques by watching your videos; Great work.
@ICWeld2 роки тому
Thanks bud. I'm glad you enjoy them. thanks for the support.
@Le_Comte_de_Monte_Felin2 роки тому
What I love is that he'll include some basics right beside the high-level repairs. If nothing else - now we all know what type of dog is required to 'supervise', which I didn't know before!
@DK-vx1zc2 роки тому
You make it look so easy.. Years of experience and skill.. Thanks Isaac.. Hope you and your family are well.. Just around the corner :)
@GARY-ks3qc2 роки тому
I was impressed by the method used to extract the broken end of the holding bolt...welding up the middle of a piece of pipe in that circular motion...First Class !
@wrstew12722 роки тому
And blind to boot. Have heard of welders who could weld by sound and feel, but first time I have seen it in practice
@fookutube5012 роки тому
It would have been awesome to see the driver reaction to your work.Anyway you're awesome as alway,keep it coming my man
@SuperSecretSquirell2 роки тому
Giving it a thumbs up for the bolt extraction technique alone. I never would have thought of that. Definitely keeping that in the back of my head for the next time I need to do that.
@markfryer98802 роки тому
And in the meantime, sourcing suitable pieces of pipe to fit inside common bolt threaded holes.
@tomc27482 роки тому
You are definitely the master of the disaster. Never cease to amaze or disappoint. Thanks so much for sharing your experience.
@peteacher522 роки тому
You do not thank us for watching your videos, Isaac; we thank you for sharing your craftsman-engineering skills with us.
@micmike2 роки тому
I haven't watched a Boring Job that wasn't Boring at all in quite a while. Thanks for sharing. Those line boring tools are very useful, once they're setup they work wonderful.
@t_r_b88422 роки тому
Done a pretty amazing job on the repair, in the field no less. Getting into Kurtis from CEE territory with that repair lol.
@mikef68792 роки тому
Curtis would have to leave the shop if he wants to compete haha. Both are very talented though
@weevie8332 роки тому
Was gonna say the same thing. A very CEE-type challenge, sans "safety inspector."
@madjimbo41762 роки тому
Kurtis does the easy stuff. He machines, he welds. He doesn’t deal with the parts on the machines, he even whines when they are dirty. Isaac just does the job, and gets them running.
@t_r_b88422 роки тому
@@madjimbo4176 To be fair, shop repairs are normally done at a better quality than field repairs. I can’t blame him on the dirt, it’s got to be clean to work on it
@LukeA_552 роки тому
@@madjimbo4176 you really can't down play either when both are at the top of their game. I don't blame Kurtis for bitching about people not even taking the time to clean stuff before taking it to him At least they don't whine and complain about every little thing like abom does 😂
@mineown18612 роки тому
Excellent bolt removal technique , a well earned 'that's so cool' . One to store away for the inevitable rainy day. As always, a pleasure to watch and learn , come away feeling a bit smarter every time. Thanks for your time.
@bseddonmusic19 місяців тому
Wow. In the field repairs like this are amazing.
@Watchyn_Yarwood2 роки тому
You never cease to amaze me with your broken bolt extraction methods! 👍👍
@shackman13062 роки тому
Thank you again Sir you do amazing work. My father was a Millwright in a steel mill for 36 years. His department maintained a cold drawn seamless tube draw bench. One of two in the world at the time. It could produce seamless high pressure steel tubes up 12" od and 40' length. He would have loved your videos. Have a good day.
@ICWeld2 роки тому
That is awesome!
@robertironside31662 роки тому
Absolutely fascinating to watch... mind blowing watch you build that destroyed threaded socket for the regular bolts using the brass... then that portable lathe using the bore of where the wheel was going to go to center the cut with that portable lathe? Fantastic stuff. You handle it all so swiftly and masterfully... You are a master at your Art... and with you... it is an Art. Thanks so much for sharing. Bravo!
@ATeduРік тому
I rarely comment on these types of videos, but I watch a lot of them. This was one of the coolest videos I have seen in a long while. Really great work!
@ICWeldРік тому
Glad you enjoyed it!
@rustydodge61672 роки тому
Amazing, ISAAC! Dress right dress workmanship! Can’t believe the in the field machining you did! WOW! Fantastic job! I’m sure the customer was extremely satisfied with the work you performed and the boatload of cash he saved! Well done BROTHER! ⭐️⭐️👍⭐️⭐️
@omrjordan48472 роки тому
MASTER Isaac, you my friend, are amazing. Everybody knows you can fix anything and could be why some things get to that point of damage. You are truly, one in a million.
@fredscheerle75922 роки тому
Grand Master
@peternicholsonu60902 роки тому
Just love to watch you work. In Australia we have Cutting Edge Engineering who does in shop excellent work including line boring and now we see you doing it on your back in the dirt!! A privilege to be with you on site.
@markreetz10012 роки тому
Very nice job. Lineboring is one of those things that you don't understand is important until you try to put something together that should have been bored but wasn't. "Hey, that pin doesn't go through right!" Great video!
@jumbleman2 роки тому
THIS MAN CONTINUES TO AMAZE ME WITH HIS EXPERT CRAFTSMANSHIP AND FRIENDLY MANNER...
@cleenlivin2 роки тому
Always amazed, impressed and wowed by what you are able to fix. Removing broken bolts, welding in different positions and then using a tool to actually machine a circular bore in the field . Very impressive and cool.
@guyforlogos2 роки тому
It’s a pleasure watching and learning from such a skilled craftsman. I had no idea one could repair damage like that in the field. Just a fantastic job!
@hfraat252 роки тому
It's a pleasure to watch you at work. Excellent job
@ThomsSimpleLifeРік тому
I've been following Kurtis at CEE, great channel, now I'm glad to say I've subscribed to your channel. I love watching men working the trades. Good job
@ICWeldРік тому
Welcome aboard!
@mikechimko85642 роки тому
Amazing field repair. I am always impressed by your work ethic and your bag of tricks. Damn few real repair guys operating in this world with your level of expertise.
@dapsapsrp2 роки тому
I an an accountant by profession but I've always been fascinated by work such as this. I do get my hands dirty in the evenings and on weekends repairing things but this is high level stuff to me. The setup and wrap up look to be rather time intensive. Nice work, sir.
@sanora802612 роки тому
Saying your a welder is my new true definition of an understatement!!!
@trippinwithtracy687Рік тому
Wow, your skills are amazing! I really enjoy your videos. You are a great teacher! Very patient and you have a good sense of humor. Blessings to you and your family.
@gordonagent70372 роки тому
I have got to the stage with your videos now that I wait for you to describe and show the problem and then pause and make a note of how I think you will proceed. I am getting closer but you still never fail to amaze me. I have not seen the weld the inside of the pipe to the bolt head trick before but as always, one more trick I can add to my rapidly growing skill set. The other thing is that you do all this in the field, come what may and do it so damn well. Your skill set is awesome and your videos are the best learning tool out.
@bobpowers98622 роки тому
A portable, weld-on lathe... pretty cool stuff, I had no idea there were such things. I'd have thought the whole thing would've been taken to a machine shop, with a milling machine or something. That's amazing work.
@brustar51522 роки тому
That process has been around for as long as there's been rotating parts within fixed housings. Knowing how to use it is a whole 'nuther thing entirely. He's good at it.
@mikemraz85692 роки тому
That broken bolt removal was ingenious I will pass it along. The build up and align boring was on the money!
@jamescaneda95152 роки тому
Michelangelo was an artist too working on his back. Beautiful work man.
@scottl4852 роки тому
If his channel was Pulp Fiction, Isaac would be the Wolf.
@kilipoheikekanilehua40492 роки тому
I wish we could have seen the line boring set up real-time. You must have used that fancy caliper to fine the center. Thanks for making these videos. They are so much fun to watch.
@Rx7man2 роки тому
Yeah, I'm not sure how he lined it all up, but how I would have done it (In Isaac's own words "It might not be the right way to do it, but it's how I'm going to do it"), I'd have bolted on the caps and used the bores on them to indicate my centers, there may need to be a preload or gap, so might need to shim them out a touch.
@garykirk19682 роки тому
Your vids hit so much closer to home now that I'm the welder for a heavy truck and equipment rental company.. Get crazy stuff like this in daily, amongst the many, MANY jacked up buckets and other attachments coming in off rental. Why do they rent, cause it ain't theirs.. Job security at its finest.. Good work brother.
@henrymichaelwilson81072 роки тому
Hello there. I like your Boreing operation. I'm retired but I help a friend who repairs plant and machinery. Henry Wilson from clitheroe Lancashire England.
@jeffryblackmon48462 роки тому
It's amazing how much you can do in the field: welding and machining to repair worn journals. Great work, I enjoyed watching and learning.
@johnmcgreevy7422 роки тому
Thanks for the new video from the master! Really enjoy watching and learning
@hank56552 роки тому
They way you got the bolt out was a great idea, with all the work you done and brought it back to life is nothing short of Amazing!!!
@dalewoodham25882 роки тому
Always loved the lineboring process, we had a bucket linebored in the quarry few years ago, very interesting, great video respect from the 🇬🇧
@Dimythios2 роки тому
A master of his craft.
@YangTang_892 роки тому
Amazing repair, as always. Looked worse for wear at the start, was intrigued how you'd approach it. Must say, you didn't disappoint! Joy to watch, can't wait to see more.
@luked237Рік тому
I really love seeing how you get stuff done and the way you work mate.
@colinsmith62802 роки тому
Brilliant repair you saved them a fortune and that Linebore machine is a great piece of kit to have in your tool kit your skill at welding is like an art great job .
@mikeznel60482 роки тому
Welding isn't an art, its a skill.
@bombardierparts2 роки тому
Great job. Those needle scalers are a lifesaver.
@LitchKB2 роки тому
That was an interesting adventure, looking forward to the next one.
@JonDingle2 роки тому
UKposts never let me know you uploaded this gem of a video. Great work and line boring is interesting for me to see. Top repair young man!
@kittypigeonclueless55662 роки тому
Unbelievably fun to watch. Watching you work is like Zen Meditation for me. Seeing a Master work his magic on something so complex in the field and make it look easy. I just enjoy that so much....especially in a world filled with fools who are in charge of everything and driving us off the edge of existence. Thank you so much for this!
@04ninjazx10rr2 роки тому
Absolutely love watching your videos. Your skill and knowledge are impressive.
@ChrisB2572 роки тому
I'm continually amazed at what you achieve - quite remarkable - great bolt removal trick and the line boring - well, that is something else. And as so often, this is all out in the field. :)
@ICWeld2 роки тому
Glad you enjoyed it
@JustFixIt992 роки тому
Its always awesome to watch another tradesman, especially one thats clearly at the top of their field.
@philoso3772 роки тому
The good about this channel is presentation. Another is no two fixes are alike. Was tired of channels specialized in a narrow range of equipment and fixed.
@johnw45902 роки тому
Very professional repair! There are very few guys out there that would tackle this repair in the field. Thanks for sharing 👍.
@mikeengstrom82602 роки тому
Absolutely amazing repair in the field. True professional of his craft.
@walterwhitaker13952 роки тому
WOW! Another great video! You never fail to educate and awe me with your skill and knowledge! I retired after 32 years as a Nuclear Grade Steamfitter Weldor LU 598 Pasco Washington. I did some Pipeline Welding in my youth also for Banister Pipeline Co. I use to see heavy line mechanics working on broken Sideboom Cats in all conditions Rain Snow Dust Heat my hats off to guys like you Sir god bless and keep you safe!
@aerialrescuesolutions3277Рік тому
Cee Australia shows line boring constantly. Thank you for the video.
@blacksheep252512 роки тому
I've never seen the pipe welded to a bolt, then heat it up and use a pipe wrench.. until I C.. I could have used it on my Jeeps suspension and now will use it whenever I break a bolt off. Thank you I C.
@humancattoy77672 роки тому
I definitely want to see this. You have a professional attitude about your work.
@shabo8572 роки тому
I’m amazed by the work you do! That whole process!! Just imagine what you saved that company! And how you made that “lathe” in place!!!! WOW. JUST WOW!!
@wxfield2 роки тому
So glad I found this channel. I've gotten so many ideas from here on how to approach repairs I do..invaluable !!
@lorka422 роки тому
I've been doing mechanic and maintenance work for 25+ years, I did not know that was a thing, the line borer, that is. Very interesting, I thought you were going to "machine" it with the gas axe!
@Rx7man2 роки тому
He might have been off by a couple thou if he used the gas axe
@shaundavis85222 роки тому
very cool love seeing the techniques
@warbirdwf2 роки тому
Ok, let see what we have here in this video- Welding..Check, fab work, Check and a major bonus! Chips flying as well! Perfect! Another viewer that appreciates your talent and skills. Well done!
@josec41772 роки тому
Aw man, this man is living in 2030 and im stuck in 2021...Good Job. 💪
@jamesbruno58962 роки тому
That was super interesting, thanks for posting!
@NenadKralj2 роки тому
Oh, man 😎 just right before bed time I love it 😎
@rupert53902 роки тому
Pure craftsmanship experience and talent doing real work - it’s the best - we all thank you for taking us along - noted CEE comments you are both top notch from across the globe - you redeem utube.
@aliasaila8818Рік тому
I like that you use stick welding a lot. Nice repair! Well done!