Scratch made high speed rotary tools are always good idea.
@hilltop48472 роки тому
I wouldn't call a battery drill "high speed", I wouldn't put that thing in a dremel tho.
@joshuakuehn2 роки тому
One eyed jack agrees
@mynameis82112 роки тому
Safe too.
@everyhandletaken2 роки тому
Just close your eyes, no problems.
@andreipobega3010Рік тому
@@hilltop4847 ❤❤de
@Blue_Collar_Hunter2 роки тому
This will come in handy when Home Depot is closed during an apocalypse and I need a replacement wheel.
@lordloloman13972 роки тому
@Wang Chung who needs power when you have...things 😎
@jddillon68422 роки тому
This is what people did long before there was a Home Depot. A lot of self-reliance with a little bit of ingenuity comes in very handy when nothing else is available.
@butterchuggins54092 роки тому
This made a perfect bone saw for my DIY brain surgery. Thanks
@jazzy78882 роки тому
Lol😂😂😂
@curtmeyer48942 роки тому
Grandma's knitting needle works perfect for a frontal lobotomy that makes a patient forget how to do useless life hacks!!!
@roberto32622 роки тому
"Hello (fill in the blank)... wanna play a game?" ⏰
@juarezderrick96472 роки тому
@@roberto3262 play with Deez nuts hahaha gottum
@gameseeker63072 роки тому
@@juarezderrick9647 haha
@setoryu132 роки тому
Here’s a life hack my grandfather taught me 😃 “Don’t be an idiot making things harder than what they are”
@suardikatv29952 роки тому
ukposts.info/have/v-deo/hoCHg2aAn4ia0YU.html
@BCGT_Mikee_Dredd2 роки тому
Nice reply, still a tip though.
@koii-chan84162 роки тому
my family when i make things harder than what they are: wth are you doing?! you're just making things harder! also my family when i make things easier: hey! life doesnt have a shortcut!
@818242 роки тому
@@koii-chan8416 😐
@koii-chan84162 роки тому
@@81824 lol :D
@TwistedSoul20022 роки тому
Don’t do that- the cap can break and fly off causing injury. Just buy proper rotary blades.
@HappyAlready2 роки тому
Right 👍👍
@lilperdi2 роки тому
No cap
@peckergaming272 роки тому
That cap ain't gonna do shit if it flies off that drill
@coginthewheel7792 роки тому
Honestly the cap is never gonna break apart like a blade will. Maybe the bolt would break but I doubt it. And as far as the nuts loosening, youd be able to tell as soon as it happened because it would very wobbly and unable to use. Definitely not safe, but I qouldnt call it safer than a standard blade, I've seen those things break off and get stuck in peoples face protectors
@birdlady27252 роки тому
Like they never break and fly off?
@ryanw22852 роки тому
This will most definitely be used as an osha exhibit during a court case
@waltergilmore82552 роки тому
Tru facts
@favoritemustard35422 роки тому
56 👍s 4u... ...it's true!
@nicoletavictoriapavel93372 роки тому
I didn.t thought about it. It.s true you right. It seems a useless improvisation but...
@about823jews2 роки тому
Why?
@PixelLife1012 роки тому
@@about823jews cutting discs can explode into shrapnel if not properly manufactured and maintained. This bottle cap could easily come off the end at high speed too
@badbowtie732 роки тому
Perfect that will come in handy the next time I’m trying to cut thin PVC or a stick of butter.
@echo35682 роки тому
Maybe a gummy bear if you lucky
@favoritemustard35422 роки тому
...oh wow finally! Tell me, Opie, what is the difference? have always wondered - tyty, tyvm in advance op
@kellyfisher42432 роки тому
Ayo shib gang
@melissakitelinger75432 роки тому
Right looks so clean 😄
@bettybanos43892 роки тому
Esta genial, que buena idea, gracias por compartir, saludos desde México
@scottwieland78322 роки тому
I'll be impressed when you turn it back into a bottle cap.
@joe-tatothepotatobiden472 роки тому
they literally have a tool to crimp bottle caps down. It wont be that hard and it wont be very impressive
@scottwieland78322 роки тому
@@joe-tatothepotatobiden47 Then fix the hole drilled in it too.
@viniciussales42642 роки тому
@@scottwieland7832 someone gave you the opportunity to win twice 😂
@ford93392 роки тому
@@viniciussales4264 lmao dammn right
@LetsTalkAboutPrepping2 роки тому
This turned out great
@cataniamommaitalia872 роки тому
My grandfather used to do that, back then the caps were actually heavier metals so it worked great!
@Amin10XD2 роки тому
My grandfather died before I was born
@echoptic7752 роки тому
Damn it they dont even make bottle caps like in the old times amirite
@GekijoOkami2222 роки тому
@@Amin10XD ok.
@arsenhalilov71822 роки тому
@@Amin10XD как
@arsenhalilov71822 роки тому
@@echoptic775 как в
@beezzarro2 роки тому
For this specific scenario, this is not such a bad on-the-fly way of making a rough hole. But I don't know if it's ever something you should rely on
@duke12812 роки тому
Unless you drink a lot of bottled beer! 🍺 🍺 🍺
@merkga2 роки тому
You're right, I wouldn't rely on it but it's definitely a good little trick to use incase you don't have what you need and its at the end of the day or something and you want to save yourself a trip to the store... ya know? 🤷♂️
@-user_redacted-2 роки тому
I've been on plenty of job sites with Corona caps laying around, and I've already got everything but the vice on me all day. This could definitely come in handy.
@merkga2 роки тому
@@-user_redacted- Right! I definitely thought so..... 👍🖖🖖🖖
@GrimmDesires2 роки тому
I thought it looked decent enough to try anyway. Looks like it'd make a decent little PVC cutter
@aetherblackbolt13012 роки тому
When you have to survive the apocalypse but have half the every-day hardware tools.
@agentone85112 роки тому
Gotta wear 3 safety glasses for this
@ayoungganteng9722 роки тому
Nirinrung
@brianphillips40082 роки тому
Or just go buy a $1-$2 cutting disc that same size. They’re not expecting expensive enough to have to “DIY” them
@PJBonoVox2 роки тому
@THISisNOTaPERSON ITSaCHANNELcozITSnotHUMAN This whole thing makes me laugh. Guy made something to cut some plastic and the internet is just ragging on him for it. At least we know they have nothing better to do.
@patman02502 роки тому
@Travis Hanks lose an eye on a spinning drill? Bro you know how long it probably took him to cut that. There's no way a drill spends fast enough to throw anything anywhere.
@patman02502 роки тому
They're not expecting expensive enough? That makes no sense.
@joseppi44352 роки тому
@Travis Hanks yeah that looks dangerous as hell using a soft metal that most likely break n fly everywhere
@abelis6442 роки тому
@Travis Hanks He cut plastic, not steel.
@joshcheck75322 роки тому
And just think if he hadn't folded the edges flat, he could have a 25mm hole saw. Lol.
@low-keyrighteous95752 роки тому
two in one attachments !!!
@TheEaglekun2 роки тому
@@low-keyrighteous9575 three if after its used it is used as a washer
@honestcomments4842 роки тому
You can also cut PVS with paper if it’s spinning fast enough
@electromerk2 роки тому
In Philippines, this isn't a "life hack", it's a necessary skill for one to be called "the handyman"
@emersonsrandomvideos2482 роки тому
Yup. In fact i do such feat long time ago with a dremel. Hirap mkabili ng ganyan ang mahal kaya life hack is the key! 😂
@ayyongnolasco36802 роки тому
If it works it aint stupid sabi nga ng iba eh. If it doesnt, yeah its stupid
@electromerk2 роки тому
@@ayyongnolasco3680 very true!
@LIE4ME2 роки тому
To lessen the likelyhood of having an aluminum fragment in your eye, throat or sever an artery or vein firstly, wear safety glasses. Measure the flattened caps diameter and half it for the radius and drill in the center to prevent those vibrations that will prematurely wear out the carbon dampeners and motor. That lopsided imbalance is that cap trying to fly off.
@1BigDaDo2 роки тому
Cool advice but I don't recall anybody asking
@toddbashem40182 роки тому
@@1BigDaDo f off troll
@toddbashem40182 роки тому
Honestly if I was in a "bush" situation and not having my dremel with cut off wheels etc. Your advice is exactly what you should do to minimize risk of any injury - well done
@clutchuwu13552 роки тому
OSHA geek having alittle meltdown over here 😆
@kirbanugaming2 роки тому
Imagine asking for scissors and your friend who's obsessed with diy pulls this shit out
@letal3932 роки тому
Gold
@S.P.B.2222 роки тому
😂🤣😂👍
@ianmangham45702 роки тому
😄
@araragikoyomi85592 роки тому
Now that's some sharp shit
@Abhayjauntvolg11192 роки тому
. 0
@revoldrofnugoblarevoldrofn92782 роки тому
As kids in Montenegro, we had a local spot where all the big name singers would come out once in a while to please us peasants with their music, and we would scavenge all the bottle caps throughout the night while trying to enjoy the music. The owner of the location would give us non alcoholic drinks for returning as many bottle caps as we could by the end of the event. Good times
@shacke1s5742 роки тому
Cool story bro
@DrazCo7862 роки тому
We had a similar game in Serbia
@AdmiralChakotay2 роки тому
@@DrazCo786 😂
@ac84852 роки тому
At a festival I went to they did this with all recyclable litter and I would see young and old children picking through bins to get the waste so they could return it for money or drinks, it reduced the waste altogether by loads
@joseze30562 роки тому
@@AdmiralChakotay .
@willienillie63372 роки тому
Now I know why I've been saving all those beer caps for.
@canman10882 роки тому
"Ever so often just for fun I do things that can cause me harm." ~Guy with deadly bottle cap blade
@MarshWalken2 роки тому
When we were kids, we try to find bottle caps and make it into a blade then try to make it a toy(the toy where you need a cap and a string, then when pulling and then relax it spins fast) then we try to battle each other who can cut the other person's string. It was fun
@FLABees2 роки тому
I was looking for this comment. I did that in my childhood as well. We got to do it from shaving blades too !
@timmykkgb2 роки тому
@@FLABees sounds safe lol
@MarioR232 роки тому
I did it too
@aunmanoi2 роки тому
Wo same here
@joel.ha.2 роки тому
@@timmykkgb safe is overrated. Live a little
@scottcrawford95382 роки тому
I'm replacing a toilet flange and this is absolutely perfect, well done good sir!!!
@jamespfitz2 роки тому
Actual rotary cutter tools with multiple heads cost about $15.
@TheRealMinotaur6672 роки тому
Yep. And they're lightyears more precise/accurate with cutting than that. They'll also last for many years too.
@cake64202 роки тому
Oh I thought it was going to be used as a washer wich I would have agreed with. Instead, I got an accident waiting to happen tutorial.
@ChrisTheCarBuilder2 роки тому
Oh so you think that's work as a washer.. interesting. Remind me to never ask you to do anything mechanical for me 🙄😂
@morandalec38692 роки тому
@@ChrisTheCarBuilder a washer is literally just used for spacing. This will work fine. Take your ego and go please.
@cake64202 роки тому
@@ChrisTheCarBuilder Well it can be a washer for something other than big metal parts on a car genius, like plastic, wood, fiberglass, PVC pipe, ect... So remind me not to ask you for anything that involves not jumping to conclusions.
@terradagon2582 роки тому
A drill doesn't spin fast enough to break it, however if someone did the same thing on a Dremel, that's where I could see someone getting hurt
@cake64202 роки тому
@@terradagon258 Nonit could very well break it, spinning it by itself isn't the problem the problem is it's improvised tool doing something it shouldn't have been doing in the first place and I bet it would either come undone or crack on something harder.
@rogersim402 роки тому
Let's see how long the thing lasts. This is one of those tips & tricks that I wouldn't recommend.
@nexus85162 роки тому
It's quick and free I don't think this is designed to compete with a diamond tipped rotary blade
@muriloaraujo65112 роки тому
At high velocity I suppose it would break, so that could also be a danger
@jonchapman68212 роки тому
@@muriloaraujo6511 High velocity? It’s attached to a drill!
@elielbourrelly99022 роки тому
More importantly than that, its not flat. Its gonna vobrate and the cut wont be precise and as said before, there is more danger of ether breakage or the tool walking and potentially hurting you if you dont hold it strongly enough.
@brandonreid45112 роки тому
@@elielbourrelly9902 I'd definitely agree...if it wasn't just attached a cordless hand drill 👍 you would have to be some kinda of clumsy to hurt yourself with this setup haha
@heavyjoechipman35942 роки тому
Now this one i'm gonna try! Very cool. Thank you.☺👍
@chingo_mandinguez2 роки тому
Chances are, if you have all the tools he used to perform that 'hack' you already have proper cut off wheels.
@tristandauod2 роки тому
I was thinking the same thing lol
@sharbel63572 роки тому
Does it hurt when your that smart ?
@hilossrt42 роки тому
Not everyone is rich enough to buy cut off wheels when they need them. Don't impose your privlage on everyone. One can use a drill, hammer, and vice for many years don't assume just because someone has basic tools they can buy whatever they like.
@hopefilledsinner39112 роки тому
@@hilossrt4 good comment but this guy had chubby fingers and a gold ring. My guess would be he could afford it.
@MrSandmstricker2 роки тому
@@hilossrt4 thank you for saying what i was thinking all the negative comments the bs from people is nonsense
@borkingdoggouwuuwuw2 роки тому
Imagine if he knew attachments designed specifically for that existed
@joshrepik2 роки тому
At first your comment didn’t compute until I changed inflection in my head and it made perfect sense
@nigelmansell88642 роки тому
There’s no shops on a desert island tho only bottle tops hammers and vices I think that’s who it’s aimed at
@fireworkstarter2 роки тому
@@nigelmansell8864 but there is a dremel, drill bits and a camera
@nigelmansell88642 роки тому
@@fireworkstarter whoosh
@fireworkstarter2 роки тому
@@nigelmansell8864 sure woosh me atleast im not as retarded as the people atempting the video
@ryanjones93052 роки тому
Quick, someone, alert the safety police! Oh wait....I see they’re already here in force.
@PJBonoVox2 роки тому
According to most of the morons in here attaching a bottle cap to a drill will generate so much potential energy that it'll rip a hole in the fabric of space/time and suck us all in.
@kgk79872 роки тому
Hahaha well said, I am sick and tired with all these "women ".
@sheepdog2712 роки тому
The Safety Swat Team has entered the chat in full force 👷♀️👷♀️👷♀️
@bendaniel62452 роки тому
I mean, I don’t care about the safety- just that it’s stupid. Like really dumb. L
@dynoshane26512 роки тому
Onya ryan,
@Saltytoastplebs2 роки тому
Or y'know, you can just buy a dremel, You can literally find one for $20
@Aatell7642 роки тому
And cut PVC for a hundred years
@kevm97242 роки тому
Went to the store for a drink with A cap 😂
@954roof2 роки тому
That’s a nice trapezoid you cut out there
@shleemie19142 роки тому
If you squint it's actually a perfect circle. Must work well!
@irish1squirrel2 роки тому
DiWhy is not something I was hoping to see here. Just buy a damned dremel
@MrBrad124352 роки тому
DIY hospital visit
@AmirKhan-kx8yw2 роки тому
@@kishorereddy6950 pp0
@kietduongtuan73872 роки тому
@@kishorereddy6950 lllll
@arnimzola11392 роки тому
Most DIY crafts can just be crap you can buy. Do you know what DIY means?
@irish1squirrel2 роки тому
@@arnimzola1139 I am aware. I also have a functioning brain and can recognize when a "DIY project" barely saves you any money or time and puts the user at significant risk. Once you reach the point where the requirements for the DIY project cost more than the tool it's replacing AND is more dangerous, just don't fucking do it. This shouldn't be controversial.
@karanjeetsingh28462 роки тому
Kamaal ka jugaad 👍👍👍
@kroz23102 роки тому
Nice! Like a little Dremel wheel! I can dig it.....👍
@2nd-place2 роки тому
Always wear eye protection. Also why spend so much time flattening it that way when you have a vise right there?
@deeez002 роки тому
Wear safety glasses!
@danielsaldana91692 роки тому
Yesss . . . .thank you . . out in the field you don't always have the right tool handy all the time . . this cutting wheel is super brilliant and come in handy if you dont have your grinder or wheels for it . . thanks again . .
@maggs1312 роки тому
I watched this *knowing* it was going to be stupid and pointless. Why?😥
@Bruce60012 роки тому
Because you have no life and your a loser, no offense 😂
@maggs1312 роки тому
@@Bruce6001 I was angry seeing such a mean comment but the longer I thought about it I was angry because you are %100 right.
@Bruce60012 роки тому
@@maggs131 true
@hardcore109876543212 роки тому
Almost anybody with the brains to do such a thing has the ability to buy the right tool for less than a quid
@D3m0manTF22 роки тому
@THISisNOTaPERSON ITSaCHANNELcozITSnotHUMAN This is not a lifehack but a dumbass showing people how to get hurt. If you can afford a drill but not any attachments then there is no point in having one. Its like buying a car and then using a "lifehack" to fix a wheel using something dumb like empty cartons of milk.
@GoogleUser-yj1wy2 роки тому
Yeah but if u live hour from the hardware store.....
@hardcore109876543212 роки тому
It'd take less time to grab a sharp serated knife from the kitchen. I've cut trunking many times with a knife. It's not difficult
@hardcore109876543212 роки тому
@THISisNOTaPERSON ITSaCHANNELcozITSnotHUMAN get over what? I made a short statement. You wrote a whole paragraph of which I was bored half way through. I think you to get over something mate.
@J242D2 роки тому
@@D3m0manTF2 nigga spittin fax lmao
@mcgee97772 роки тому
Little known fact, actual rotary blades cost less than a case of beer
@mcgee97772 роки тому
@Robin Truby I mean if you want to risk losing things that you probably shouldn't...
@dangrimes50782 роки тому
@Robin Truby no
@dangrimes50782 роки тому
Personal protective equipment?
@kenechukwujoe69092 роки тому
Lolz This reminds me of a fight competition when I was much younger!
@ralvis222 роки тому
You should use the cap to cut out a bottle opener to get another cap. Perfect loop opportunity.
@-user_redacted-2 роки тому
No need for the bottle opener when you have a pair of kleins
@LongPeter2 роки тому
When the right tool is in a drawer you would have to leave your chair to reach.
@monet69442 роки тому
This is truly the perfect scenario to this solution lol
@brunobeltranbelmonte10812 роки тому
A life hack needs to be easy and accessible to anyone. He is using very specific tools for specific professions. Plus that doesn't seem safe.
@akx13022 роки тому
A drill and pair of pliers is specific? I think the Dremel head is dumb but lmao
@mofo18532 роки тому
Not for nothing; it would help to have a simple jig to get the hole in the center, and removing the messy burrs before adding the bolt/nut to secure would allow it to sit perpendicular to the rotation. Lastly, thin pvc like that can be cut using a simple exacto knife, without the radius over cut. Just my 2 cents.
@jonne77252 роки тому
I've tried cutting cable channels with a knife and i wouldn't wish it upon my worst enemy
@lenac35872 роки тому
I suppose we can use a sardin tin can cover as well. This is so cool😍
@benduncan39302 роки тому
This is the type of sht you would do if you were stuck on a island and needed to get home...
@dojoparsnip99052 роки тому
stuck on an island with power tools. i want to see that.
@audreygullas87282 роки тому
Well I myself found it interesting. When you ain't gotta dime and times are hard. Some have never had to live that.
@zacksguitarhacks63902 роки тому
People don't actually understand what the word privilege means
@hilossrt42 роки тому
@@zacksguitarhacks6390 isn't that the truth.
@phantommedia99642 роки тому
How do u afford a dremel/drill but not a cutoff wheel?!
@hilossrt42 роки тому
@@phantommedia9964 its not terribly hard to fix a drill that you find in the trash or at a yard sale for cheap or free. Cut off wheels wear out quickly and one can go through them quickly. Anyways my point is it's not difficult to get a drill and have it working for years. Infact my own drill cost me like $20 and I have had it for over 15 years. Compared to how much I have spent on cutting disks I definitely spent hundreds of dollars on them over the years.
@travisrose22252 роки тому
its called going to work and not expecting society to take care of you.
@jaycustom212 роки тому
Wow! A life hack that is actually useful and I can actually see myself possibly using! 👌👍
@Quinnergy2 роки тому
Fantastic display of ingenuity! 👌💯
@sheeeshkid6682 роки тому
I thought it was going to be a washer
@blooeagle51182 роки тому
It's aluminum. It's weak. It will break. Shrapnel can hurt you badly. Just buy the proper gear.
@tj-zc7ce2 роки тому
Aluminum is soft, it might tear but it would deform before it got to that point, its not brittle enough to snap and fly across the room
@tylorrobinette66622 роки тому
That Cap is a dollar in Fallout And there you go bending it!!
@MaNNeRz912 роки тому
The first thing I thought when I saw the bottle cap was "I bet he's making some sort of shit Dremel cutting disk" ...yep
@tripclipgt65732 роки тому
DIY are cool and all, but this one a little over the line, this ain't safe. Rotary blades are designed for this, caps awernt. You do you though
@megactyl2 роки тому
Итак... Я птжалуй первым буду... Самоделка на 250 полуляхов из 250
@aboutThatBeerIOwedYou2 роки тому
На 251
@user-it5yc4rc2z2 роки тому
Доктор пишається тобою.😉
@nickhammac2 роки тому
What the fuck does that say??
@UselessZero2 роки тому
@@nickhammac there's a measure of "DIY bullshit" measured in "polulyah" with a cap on 250. This thing is measured 250 out of 250.
@user-it5yc4rc2z2 роки тому
@@UselessZero Yes.
@mildredbrown5162 роки тому
Shark tank , somebody Jeff? , Larry Branson? Buffet , mark , musk , gates , dang
@cosmicbilly2 роки тому
Just wait for the day when it shreds and a pieces flies into your eye lol
@mCblue792 роки тому
A bottle cap is not DESIGNED to be a cutting tool. Hope you're wearing safety glasses......
@user-sj2vg8hb5q2 роки тому
bro... its not gonna kill you
@carval512 роки тому
@@user-sj2vg8hb5q it shard might
@mCblue792 роки тому
@@user-sj2vg8hb5q Nah, it probably won't kill you. Blind you, blind your kids, maybe.
@BorodinRW2 роки тому
Великолепно :👍
@anjuunde25082 роки тому
ओ
@sandmanjono12392 роки тому
Seriously how simple yet how clever 👏🏻
@vzgsxr2 роки тому
Better quality then a Dremel..😂
@radcowdisease2 роки тому
Trying to go through all your posts but you post the same clips 2, 3, 4 times and it's annoying.
@denerandre89142 роки тому
Dude gota catch those views
@k.m.h.13462 роки тому
OMG you invented a tool that cuts wood. Let's Name it "saw"
@uraphag83142 роки тому
I think the Simpsons already did it
@LUC9XBOCT2 роки тому
Do you sure this is wood?
@jintarokensei33082 роки тому
This is so useful! Now every trashcan is a hardware store!
@devo1977s2 роки тому
🤔 I'm trying to remember the last time I had any drink that had that style of cap
@thomasdavey15132 роки тому
If it requires tools then it's not a life hack.
@guillaumelm88532 роки тому
This cut is so clean I would eat on it
@Pyth1102 роки тому
You've got some low standards
@guillaumelm88532 роки тому
@@Pyth110 No I've got an high irony level 😁
@jacksongoulding88022 роки тому
I'm installing a double din stereo in my truck, and have been looking tools other than a dremel tool. I got caught up in these UKposts shorts, and thank god this came across. I never woulda thought of that. Freakin genius
@PixelLife1012 роки тому
Just buy a dremel they're not that expensive and a set of bits and bobs for em are like 20 quid. It's worth the 100 quid in total for safety and ease of use
@dallinpalmer73882 роки тому
Damn broke the internet and all of Dremels sales 😂🙏🏼
@LairOfLair2 роки тому
I wanted to call Doctor DIY, but comments are warming my heart. Diy is a total crap. Самоделка - полная хуйня, 249 полуляхов/250
@tokyo_34982 роки тому
😳👉🏿👈🏿
@dairinpalacios2982 роки тому
@@tokyo_3498 ñ1ñ
@onmoominmind2 роки тому
орунькаю
@jackbright38542 роки тому
Не ну в принципе, это работает. Но вопрос в том, нахуя оно есть. Так что где-то 240 полуляхов/250
@joparokokja2 роки тому
Дортору не отправляйте, он ещё от последнего видео не отошёл...
@J242D2 роки тому
I agree
@jgbalboa2 роки тому
Absolutely
@tobien48142 роки тому
love that music
@marcobell12502 роки тому
Now all we need to do is get the guy who can throw cards at 90sum mph
@Kycirion2 роки тому
Boy, imagine if someone showed him what a box cutter is...
@marv84812 роки тому
Could you imagine a world where rotary tools, potentially made for a specific purpose like this, with interchangeable bits existed, potentially made by a company founded by Albert J Dremel, or even off brand tools with nearly the same purpose and build quality, potentially with even better build quality? Could you only imagine being able to have more control and dexterity with a small portable device, and maybe being able to go to the nearest store that supplies hardware and or freight from the Harbor? Lmao these life hacks get worse and worse every time I accidentally stumble across one.
@gamer21012 роки тому
I wish such tools were real!!
@fz1000red2 роки тому
Crude but functional, and more importantly it teaches viewers to try thinking outside their normal comfort zone.
@swiftrian2 роки тому
I mean if it's 2 am all the stores are closed and you really need to get off those handcuffs? Lol. Kinda cool though if you're really in a pinch and MacGyvering is the only option.
@h0ll0w_CS2 роки тому
Todos tenemos ese tipo de cosas hasta en el baño, no? Por si mientras cargamos nos Dan ganas de crear una mesa.
@otrocanalpedorrodeyt60162 роки тому
Chale, el unico comentario en español :'v
@rebron27082 роки тому
Ну если тебе нужно зделать "дырку" то штука полезная а от если окуратный пропил ну......
@KG-Girl2 роки тому
Аккуратный пропил тоже можно сделать, если руки растут из правильного места
@kelderos2 роки тому
Боюсь это приспособление годится только на делание дырок в себе. Крышки даже близко не рассчитаны на то, что какой-то дегенерат пойдет ими пластик пилить.
@hectortoro75272 роки тому
Que maravilla
@nathansilva19112 роки тому
Levem em conta que o vídeo está acelerado, além do material que está sendo cortado, por isso aparenta ser tão fácil o corte. Nao deixa de ser um bom truque que facilita um corte pequeno e preciso, se comparado com o uso de estiletes, ou a própria broca, nesses serviços.
@Na0uta2 роки тому
As soon as I saw a pair of pliers and a bottle cap, I knew he was about to make a little saw.
@jotarosans75402 роки тому
If this is a lifehack then normal people are the anti hack system
@user-hm7oi2pu8g2 роки тому
Не, ну а вдруг инструмента под рукой не оказалось, пробка то ведь всегда рядом лежит,так ведь, или только у него так?
@user-mp1ro6md2n2 роки тому
@@ultraradijatorius таких маленьких фрез в продаже практически нет, да и стоят немерянно для одноразовых работ. А иногда нужно вырезать зигзагом гипсокарон, или квадратное отверстие- одно, приходится ножем или пилой продалбывать- прошкрябывать, при этом рвется задний слой бумаги. А в прикрученном листе ни ножевкой, ни лобзиком не влезешь.
@yesenialopez28052 роки тому
Cool idea for emergency situations. Thanks👍
@zeusg63832 роки тому
When i was a kid, I used to flatten them glass bottle caps and just make a weapon out of it
@zigzag71942 роки тому
👀
@saqibmudabbar2 роки тому
OK this AI thing is getting creepy. I wAs just thinking about this yesterday. Just a little bit different. We used to do it with strings.
@aliencl35592 роки тому
Будет смешно когда крышка лопнет и воткнется в глазик, потому что это не диск для пилы. Не делайте подобного дома, это идиотизм )
@Palladium10102 роки тому
Да ладно. Попробуют и больше не будут. Глазика-то два.
@user-mp1ro6md2n2 роки тому
Как раз фреза лопнет быстрее. Лопнет крышка, установленная в УШМ, а в дрели она только сомнется, так как сталь пластичная. Да и пилить нужно для разрушения крышки металл, что никто делать не должен. Ну и в первую очередь смотреть нужно только сбоку, а не сверху на любой рез.
@joeym6452 роки тому
This guy fixed my coo-coo clock with an old sponge and a leaf spring... - he's THAT good
@havik34202 роки тому
These are the kind of people you need around for when the zombie apocalypse happens.
@Starblitz0012 роки тому
А вот это пожалуй один из самых полезных лайфхаков и самоделок жизни
@dmitryscotch2 роки тому
Доктору отправь чтобы увидел
@8_o_8602 роки тому
Waiting for the moment when it will fly in someone's eye!
@artthrower77732 роки тому
Thanks for this it will help me out a lot
@VK92 роки тому
This is pretty neat!
@suzjohn32 роки тому
That is awesome, I can think of at least a 100 ways I could use that
@ja.80772 роки тому
I thought he was just gonna use it as a washer lol
@corollafrenzy2 роки тому
Heck Dremel and their tool truck prices! This is an excellent idea! Maybe amp it up with a soup can lid? Lol
@therecklesswarlock64392 роки тому
Fantastic, I just drank 4 beers the other day and still have the caps.