Make projects via Micropython using just A9G board | GSM, GPRS, GPS, MQTT and lot more....

День тому

This video will guide you about how to get started with A9G board via MicroPython. I have show the process by doing couple of tasks like,
- Controlling On board LED on A9G
- Reading Button Status from A9G
- Sending SMS from A9G board to any Number
- Sending/Receiving data over GPRS via MQTT protocol using Adafruit MQTT
- Getting current GPS coordinates
and we did all these tasks buy just using A9G board alone via Micropython
Get a free trial of the world's most trusted PCB design software, Altium Designer with 365 and 25% off your purchase: www.altium.com/yt/techiesms
Free search engine for the best quality components from Octopart: www.octopart.com
__________________________________________________________
👨🏻‍💻 Important Links 👨🏻‍💻
Flashing Micropython Firmware on A9G board - • Step by Step Guide to ...
Scripts used in this video - github.com/techiesms/A9G-Boar...
Scripts I took reference from - github.com/pulkin/micropython...
__________________________________________________________
Buy the components for your projects and support techiesms💡🔌
A9G Board - www.techiesms.com/product/ai-...
Smallest TTL Programmer - www.techiesms.com/product/sma...
__________________________________________________________
⏱ Time Stamps ⏱
00:00 Introduction
01:59 About A9G Board
02:10 First change it's firmware to Micropython
02:53 Setting up A9G board for Thonny IDE
03:58 Blinking on board LED
06:26 Controlling LED using Pushbutton
07:50 Sending SMS from A9G board
11:05 Sending & Receiving data over GPRS via MQTT protocol (Adafruit IO)
16:28 Getting realtime GPS coordinates on A9G
19:37 Suggestions
__________________________________________________________
🎥 🎙 My Video Gear 🎙🎥
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (amzn.to/2I5cdDi)
Tripod - amzn.to/3uNhC4H
Microphone - Zoom H1N(amzn.to/3Osh12A)
Editing - Final Cut Pro X on MacBook Pro ( amzn.to/3vHcSyJ )
__________________________________________________________
Get connected with techiesms everywhere..
Subscribe Main Channel :- bit.ly/techiesms_youtube
Subscribe Shorts Channel :- bit.ly/techiesms_shorts
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
Telegram - @techiesms
__________________________________________________________
techiesms
explore | learn | share

КОМЕНТАРІ: 81

@ElconicsIndia Рік тому

Fantastic board as well as the speaker ! Thanks for this video

@techiesms Рік тому

Glad to hear that you liked it. I would just request to keep supporting by keep sharing our videos ✌️

@wjn777 Рік тому

Interesting video, thanks for sharing. Looking forward to your next video, hopefully also using the built in SD card slot

@mbuguanjane5612 Рік тому

For sure kindly our professor need to check out on sd card....... so far he is doing good job

@ayesha3179 Рік тому

Gr8 work done sir ❤🙏keep it up and plz bring with 🆘 button, spy and multi purpose with just this A9G board using Micropython

@felipealvarenga6043 Рік тому

Very well made video!

@viswanathav9620 Рік тому

Great video. Making everything simple.

@techiesms Рік тому

Thank you 😊 It really take a lot of efforts for us to make everything simple for you 😇 Just keep supporting, keep sharing ✌️

@prarthanabhat5855 Рік тому

Great video! Adding micropython firmware really simplifies the process!

@mbuguanjane5612 Рік тому

we are moving very fast , you are now a professor you like doing research here and there and updating us

@sergiobogarin Рік тому

excelente video

@tbaztw 2 місяці тому

You are awesome.

@buddybusiness01 Рік тому

Thanks for so crucial info. Can you pls GPS tracker that provides a live location of the device so we can track it from our website or app so can we connect the above one with our app to track our device specifically if we connect it to our cars

@emmanueldurotoye6940 Рік тому

Nice Work here. Please can you make a video where GPS data is posted to an API

@tschauleude3426 8 місяців тому

Hey do you know how I can combine the GPS tracker and SMS sending? Like reading GPS signal and sending data via SMS. I can not find anything ;(

@briliant.nugraha1645 3 дні тому

hi, great video as usual, could I know, could we deploy this code, and run this a9g board individually without arduino? I am quite interested with the board, thanks in advance!

@yogpanjarale Рік тому

Hey can you also make video about a7670c 4g module as it is cheapest 4g modem and also available right now

@dorjidhendup746 9 днів тому

Sir, I wanted to ask, why sir didn't try sending the GPS location via mqtt, that would be awesome as it can act as a remote tracker. Love from Bhutan.

@lokeshachanta1096 Рік тому

can you make a video on a9g module using micro python and send coordinates to Adafruit MQTT

@blessingaghoghovwia4903 Рік тому

Nice one

@infoyt73tech Рік тому

Great video thank for sharing information this board has on board camera?

@techiesms Рік тому

@Sekhar_Home Рік тому

Is this microcontroller can works on 2g sim? Actually my sim800L rarely read the network.

@prarthanabhat5855 Рік тому

How long does it take to get a fix on the gps, and update the coordinates?

@thatonesnowboarde Рік тому

Hi can you do the same examples in C?

@emmanueldurotoye6940 9 місяців тому

Sir, how can I program just the A9G chip without the entire development board

@Rajeshsingh-ws5th Рік тому

Is there any 4G support module available (Jio sim). all are 2g support sim videos I've seen so far. Whether its sim800/900 or A9G all only supports 2g.

@sergioestevansuarezdiaz8816 Рік тому

con que placa de desarrollo se puede desarrollar con un esp 32

@nakadany 3 місяці тому

Hello @techiesms, I disconnect the a9g from the serial usb I feed it with a 5V to 5V source of the A9G and the gnd - and it does not start with micropython or pressing the power button, do you have to do something to start it with external power without serial-usb? Can you make a video? Greetings

@mbuguanjane5612 Рік тому

waiting to see the calling feature in the module and sd card

@Embeded_Geek 8 місяців тому

hey can you make a video on C SDK for A9G, there is not a lot of video material. It uses RTOS like code pattern but it is much more faster than micropython

@axramar7743 Місяць тому

Need to explore this

@antoniocampisi5385 6 місяців тому

great video man... im trying to replicate it to myself but i cant now, should i connect the device in adafruit io page where it says: connected device? or is it non the problem? have i to impost the dashboards in a particular way/name?

@ShivamKumar-yf9ew Рік тому

Sir may you create a project using NodeMCU that can control home appliances with the help of ALEXA, BLYNK, IR and MANUAL SWITCH

@ayesha3179 Рік тому

Sir when you will upload video on using only A9G board GPS TRACKER❤❤

@pondineshs2513 10 місяців тому

Hii, I am working on this module for gps tracking. I had one issue when A9G module was connected to the TTL connector It worked fine but, when connected to the USB cable alone it was not working. How to resolve it.

@Gerald-iz7mv Рік тому

Hi is that the best LTE board for a raspberry pi?

@Anh_AI 7 місяців тому

Which module using 3G or 4G network that as cheep as this module plz?

@deadeye1982a 3 місяці тому

It's a pity, that it's not in the original project. So you get an old Micropython-Version. Since the last 2 years, Micropython got many improvements and additional functionality.

@JAM-of6px Рік тому

Hello sir can you make a gps tracking project which will display the location in a website(the website also made by yourself). Amazing video btw🫡🫡

@buddybusiness01 Рік тому

Ya I also want the same like a gps tracker that provides a live location of the device so we can track it from our website or app

@denicsdevices 10 місяців тому

get in touch

@MArhamShabbir-bg2qn Рік тому

Thank you sir but this is my college project so can you make a video using Arduino UNO With A9G Module 🥺🙏🙏🙏

@TheCruzado69 Рік тому

hello . very good video. I have followed the instructions and I have managed to get the gps working. But with gprs I can't connect, using a euskaltel (spain) sim. I have tried several apns. any suggestions? thank you

@techiesms Рік тому

It only supports the 2G connectivity

@TheCruzado69 Рік тому

@@techiesms thanks for answering. I have tested the sim in my mobile phone in 2g mode and it has an internet connection. in the a9g it does not connect with this same sim using the same apn data. I don't understand. thanks a lot

@ahmed100ification Рік тому

Which board can accept a 4G network?

@mohitrocky3543 Рік тому

Great Work Bro.. can You make a video of using both GPS & GPRS in A9G module.Which can send the Gps locations to the google firebase through GPRS in A9G board ..This will be a somewhat challenging for you bro..please make it

@abibor Рік тому

Hello, do you know how to send post request to firebase use gprs_c_sdk?

@subaselvia1250 3 місяці тому

It's possible to implement this board in women safety projects? Please Guide me sir...

@aadarshrajput4372 8 місяців тому

what will be total cost if i want to make it as my clg project

@techiesms 8 місяців тому

you can get the A9G Board at the cheapest price on Internet through our website www.techiesms.com/product/ai-thinker-a9g-development-board/

@thinkerrobotics Рік тому

button, spy and multi purpose with just this A9G board using Micropython

@user-vb9tp4km9c Рік тому

i have only 10 pins how i can use it

@mdnnjony4000 11 місяців тому

please let me know, gpio pin short to call and sms send.

@denicsdevices 10 місяців тому

Hey to receive the SMS, you need to check the event type, it is not int, then the evt object itself contains the information SMS("PHONE NUMBER", "SMS TEXT", pn_type, index,purpose)

@wojtekkusiak 10 місяців тому

i have exactly the same problem. sorry for my english, i'm from poland and i can't speak well. you may have the correct code?? I would be grateful

@denicsdevices 10 місяців тому

@@wojtekkusiak I have already gave it in my above comment. Please go ahead and try. Let me know the results.

@wojtekkusiak 10 місяців тому

@@denicsdevices Okay I see thanks (^^)

@wojtekkusiak 10 місяців тому

Problemem jest brak metody SMS_Recive w bibliotece Cellular. Wystarczy wspinać >> help (Cellular) i tam wyświetla się wszystkie funkcje itp „recive” brak stąd nie ma możliwości żeby to działało

@axramar7743 Рік тому

💫✅️

@sundaresann4749 Рік тому

Why do we have to press the button to power up the board? It's done automatically right?

@RodrigoAbreuo_o 7 місяців тому

I have the same question. I tried reading the manual which is in Chinese and in the pin definitions it says that the PWRKEY pin must be low level to turn on. But in the devboard schematics it is at a high level. That's propably why he has to hold the button to turn on.

@padigerimahendra4960 7 місяців тому

hello sir i have ordered a9G module in your website but it is not working what should i do sir?? is there any replacement or return

@techiesms 7 місяців тому

Yes we do have return policy. But before that let our team observe the error and try to rectify it Kindly contact on our WhatsApp - +91 82000 79034

@virendraparihar6982 Рік тому

Does this work live moving GPS ? Whenever this module moves

@techiesms Рік тому

Yes

@shahriersiddique2609 3 місяці тому

How to include microphone @a9g?

@techiesms 3 місяці тому

It's already in built in the A9G dev board

@shahriersiddique2609 3 місяці тому

@@techiesms i meant coding wise, like storing audio to sd card then sending audio to webserver etc.

@ismartalluarjun Рік тому

Please make mobile phone keypad mobile phone add Nokia display and OLED display full video make

@habibhabibov4610 Рік тому

hhhhhh you are Crazy hhhh god bless you. wow

@lewebusl Рік тому

@nakadany 3 місяці тому

when start stop show this message: Device is busy or does not respond. Your options: - wait until it completes current work; - use Ctrl+C to interrupt current work; - reset the device and try again; - check connection properties; - make sure the device has suitable MicroPython / CircuitPython / firmware; - make sure the device is not in bootloader mode.

@nakadany 3 місяці тому

hay que instalar drivers que no lo dice en el video, y conectar los cables de control rx tx inversamente tx a rx y rx a tx..

@gvanantham174 Рік тому

When you will conduct next master class

@rakshitpatel9664 Рік тому

A9g board lack of latest location

@mahkhi7154 Рік тому

The Question is? Why are the Darliks Doing, SOFTWARE DEFINED HARDWARE? The Darliks Can't Compete with the Borgs. So They Have Lower Volume. The Darliks Don't Want to Get Dependant On Borg Technology and then Get Strangled by them. They Want to Show them that They Too can make Hardware in Order to Get Discounts. Because of Lower Volume: They're Using General Purpose CPU's / Hardware to Do Their Specific Hardware. If they Could Compete with Borgs on Volume. Then they Wouldn't Do: Software Defined Hardware.

@mahkhi7154 Рік тому

Those Darliks Have Made a Big Mistake With Their: SOFTWARE DEFINED HARDWARE. We Can Break the ARM Cortex A53. The Hardware Chips are Using Slimmed Down Micro Controller Versions of this. Therefore We Can Reverse Engineer with Ease, their Hardware Devices. Their 3G Chip will Break Easily. The LTE, Chip is using Hardware Accelerated Floating Point. We Might Not be able to Do that One. Not a Problem. We Can Do: GSM450: E-Mail. GSM:900 Voice. GSM1800/1900: 3 Megabits Data. You're Running Communism and Slavery the World Over to Run your Satellite Cloud Broadband Networks. The Standalone WiFI Chip will Also break easily. As For Personal Computer Devices. The Mackintosh Peripherals, will break Easily. We Can Run Mackintosh Drivers, On Our Hardware.