Big thank you for watching this video :) Tools & Machines I used in the project & Timestamps Sherline Lathe: amzn.to/2Mwb6Lh Sherline Milling: amzn.to/2M2k7Nh SKIL 9-Inch Band Saw: amzn.to/35B0nqY Dykem blue: amzn.to/35JCGgp Lathe Mill CENTER DRILL : amzn.to/2R1pA9Q 00:11 making the Front Cover 01:50 making the Rear Cover 03:58 making the Crankcase 07:18 making the Distributor 09:09 making the Distributor Disk 10:47 making the Bevel Gear 13:02 making the Crankshaft 15:48 making the Master Rod 18:50 making the Slave Rods 19:33 making the Pistons 21:09 making the Cylinders 23:10 making the Propeller Spinner 24:45 assembling the parts 25:35 the finished circuit with Arduino 25:42 testing the hall effect sensor

I am a retired mechanical engineer, I worked mainly in development. This video has brought back some happy memories. You have a new subscriber. Thankyou.

Me and a few friends from school are making a model B17g flying fortress from scratch and figuring out the engines has been the hardest part for us, we appreciate the video showing us how, thank you from all of us

Machining tiny brass bevel gears, detail and skill most UKposts makers couldn't do

I've watched two of your builds. I hope people realize how compressed these were. And appreciate how much time this took. Amazing lathe work. I thought it was all superb!!!

I would of liked to see it run with a propeller. So that we could better see the motor turning and not just hear it turning. Great job very happy to hit the thumbs up like button.

Would have liked to see acrylic front cover. The interior looks so cool and would be nice to see working (especially in slowmo), seems a shame to hide that craftsmanship. Awesome non the less.

mesmerizing, yet educational. I could spend hours on this channel. I feel like a small child watching dad do what he does, but making sure to stay out of the way because dad asked me to.

It feels strange to say it but those are the prettiest solenoids I've ever seen.

Cheese and rice, what planet do you come from? I’ve been an engineer/machinist for over 30 years and know how much work you have put into this project. Very very well done. And you know electronics like Marco Reps on top of your machining ability. Keep em coming.

So... yeah... this is the kind of videos youtube recommends me at 4:00am... now back to sleep. Good job, man. Awesome work.

I know almost nothing about machining. This makes my brain hurt... and I cannot stop watching! Awesome project, awesome vid!

Being able to translate thought into G code is an enviable ability worthy of some kind of salute not to mention the gestalt wherewithal to obtain the tools, learn to use them, envision a product, generate a design, order the material, write the code, interface the hardware, have the patience, set up the lighting, record/edit the video and get it on line. As an amateur machinist, amateur programmer and amateur maker of videos I am seriously impressed by this (and know it's beyond the casual plebian viewer to sufficiently appreciate the effort! Lol).

A beautiful build! I'd also coat the windings with epoxy so they'd not scratch themselves because of the vibration, and add some oil inside, so the engine would be self-lubricating. Also, at 28:20, it's funny how those meters always have the initial display of 6.66 - especially with the red LEDs looks like a nod to the Escape From L.A. movie's final scene.

I am more impressed with how you know what shape to make the inner weight so that it doesn't vibrate at high RPM.

The algorithms brought me here as well! Surprisingly enjoyed watching the whole process, wish could have seen the whole engine working in slow motion

I have never seen a radial electric engine before. wow!!

No Sir, Thank you for taking the time and effort to bring this to us. It is indeed our pleasure. Many thanks from the U.K.

Muito interessante, ótimo acabamento das peças. Ferramentas de qualidade. Ótimo torno .

Me: *having never shown or expressed any interest in engines* UKposts: May I make a recommendation? Me: Oh go on then.

The parts seem like a decent size until he picks them up and they're so tiny! It's adorable!

Very nice, looking forward to the teflon bobin version and the comparison with the brass ones. You've already eliminated a large frictional losses by using the hall sensors instead of micro switches. Great job, very impressive.😎

That was awesome! Including the schematic wiring diagram and videoing the wiring process would have been stupendous. Thank you! Very invigorating!

Mine eyes have seen the glory of the coming of the „cnc maschine shop in a nutshell“ ! I had goosepimpels through the whole video. I am a 72 years old dentist and oral surgeon with a keen interest in mechanics (go figure!) and this is the first time I have seen this equipment. That is a small format but a giant leap in technology. I am genuinely impressed! Thanks for making my sunday afternoon in Mallorca!

All I can say is a very big WOW!!! Very impressive, sir. You have taken craftsmanship to an extremely high level.

Excellent video. Love the engineering skill. I'm an electronics engineer and the wiring and circuit board needed proper housing to be finished off. The coils could of be wound in perfect layers with a lathe. Also showing the Arduino code would of been nice for those of us that love all the details of open source but still wonderful to watch you make this. Well Done.

The work that you do is absolutely outstanding and deserves to be captured in 4K resolution!

I would LOVE to see this used on a WWI style RC airplane. It really does look like the classic 9 cylinder engines those old airplanes used to use.

That engine is just Beautiful, I love it! Great job!

You win the “making something incredibly complicated from scratch on youtube” award.

omg, this attention to details. LOVE IT

I'm a computer engineer. Seeing your work I think I failed choosing my profession. Amazing. You are an artist !

New subscriber! I especially like the part being machined shown in the corner. Nice touch.

to assemble such a project would have been cool enough to see...but you did it all!!!!! Bravo!!! liked and subscribed...And i will be showing this to tons of people...Thank you for being awesome

As someone who only has basic high school level knowledge of metal working this AMAZES me. :D I loved how simple you make machining those complex components look; the cinematography alone was fantastic not to mention how beautiful the process and final product looked. I could only imagine the passion you have for what you do, and I hope you have many good years making more stunning "art-itectural" mechanisms. :)

Some humans are so smart it’s actually insane...I could never dream of having this idea and let alone the skill to actually make it happen...My mind is blown

If this kinda stuff isn't art I don't know what it.

In your next video, I would like to see how you design something. I may be a fool for asking, but I think it would be pretty neat to see how you bring these designs from your mind to the final blueprint. Merry Christmas. 👍

Impressive. I designed and built me a reciprocating solenoid motor back in 1967 when I was in fourth grade. I used a wooden flywheel with copper clad as a commutator.

I just love to watch videos like this. Could watch them all day ! Auto Mechanic all my life and, Hope to achieve this level of precision before I die.

I'm collecting my jaw from the floor. Thank you for brightening my day!

This guy is a maker on a whole nother level. Excellent work sir. I thought I was a pretty good maker but this is something else. It actually doesn't inspire me to be better, it inspires me to quit and just watch videos from this channel. I could keep making for 100 years and never get on this level. All praise due. You're the GOAT.

It even sounds like a radial engine. As a warbird enthusiast, this makes me happy. Thanks for taking the time to make this.

Now you can make the rest of the plane and... "here we goooo!!"🤗

Молодец !!! Хорошее терпение и золотые руки !!! Продолжай в том же духе !!! Мне очень понравился твой труд , и мастерство !👍👍👍

When you are turning the part it's is so satisfying.

It would be really interesting to see this set up with a propeller and some sort of rig to measure how much thrust it can generate. Excellent work.

So clever design , you are the master of lathe + electronics ...where do you pull all those ideas ? Thanks for sharing.

Cool. Thanks for taking the time to do, and show this :)

So satisfying and im glad I got to use a metal lathe so I could experience it myself

Utterly blown away by the precision. Great work!!

Respect, This looks maybe easy for the most but this person is really high skilled and have perfect machines to make this

Extraordinary. Thanks for the video. I loved.

I greatly appreciate the absence of music, thank you! This was both informative and relaxing to watch!

I'm only a rough old boilermaker, this precision is fascinating to watch 👍

should put some blades on it and turn it into the coolest desk fan ever :P

You got me glued to my phone for half an hour!:-) is there anything you can not do? 😁

That was awesome! Thank you for your days of effort for my 25 minute educational bliss

I was spellbound with this one. Loved it too much. Incredible work!

I wish these things were practical for vehicles because they are just so cool

This is amazing. Setting up all the different camera angles must take a lot of time. You deserve more subscribers

All the camera work, sound, and video editing on top of a project like this must make it take twice as long. Thank you sir. Even though you feel alot of reward from making this project, we did too.

You have an huge skill and patience. Thanks

Would be cool to see this a RC Plane... Great Work

This is art

This is legitimately so beautiful.

Lathe machines are so satisfying to watch

축하합니다. 당신은 한국어를 발견했습니다. 좋아요 1개 감사합니다. 좋아요 2개 감사합니다. 좋아요 3개 감사합니다. 좋아요 4개 감사합니다. 좋아요 5개 감사합니다. 좋아요 5개 감사합니다. 좋아요 6개 감사합니다. 좋아요 7개 감사합니다. 좋아요 8개 감사합니다. 좋아요 9개 감사합니다. 좋아요 10개 감사합니다. 좋아요 11개 감사합니다. 좋아요 12개 감사합니다. 좋아요 13개 감사합니다. 좋아요 14개 감사합니다. 좋아요 15개 감사합니다. 좋아요 16개 감사합니다. 좋아요 17개 감사합니다. 좋아요 18개 감사합니다. 좋아요 19개 감사합니다. 좋아요 20개 감사합니다. 좋아요 21개 감사합니다. 좋아요 22개 감사합니다. 좋아요 23개 감사합니다. 좋아요 24개 감사합니다. 좋아요 25개 감사합니다. 좋아요 26개 감사합니다. 좋아요 27개 감사합니다. 좋아요 28개 감사합니다. 좋아요 29개 감사합니다. 좋아요 30개 감사합니다. 좋아요 31개 감사합니다. 좋아요 32개 감사합니다. 좋아요 33개 감사합니다. 좋아요 34개 감사합니다. 좋아요 35개 감사합니다. 좋아요 36개 감사합니다. 좋아요 37개 감사합니다. 좋아요 38개 감사합니다. 좋아요 39개 감사합니다. 좋아요 40개 감사합니다. 좋아요 41개 감사합니다. 좋아요 42개 감사합니다. 좋아요 43개 감사합니다. 좋아요 44개 감사합니다. 좋아요 45개 감사합니다. 좋아요 46개 감사합니다. 좋아요 47개 감사합니다. 좋아요 48개 감사합니다. 좋아요 49개 감사합니다. 좋아요 50개 감사합니다. 좋아요 51개 감사합니다. 좋아요 52개 감사합니다. 좋아요 53개 감사합니다. 좋아요 54개 감사합니다. 좋아요 55개 감사합니다. 좋아요 56개 감사합니다. 좋아요 57개 감사합니다. 좋아요 58개 감사합니다. 좋아요 59개 감사합니다. 좋아요 60개 감사합니다. 좋아요 61개 감사합니다. 좋아요 62개 감사합니다. 좋아요 63개 감사합니다. 좋아요 64개 감사합니다. 좋아요 65개 감사합니다. 좋아요 66개 감사합니다. 좋아요 67개 감사합니다. 좋아요 68개 감사합니다. 좋아요 69개 감사합니다. 좋아요 70개 감사합니다. 좋아요 71개 감사합니다. 좋아요 72개 감사합니다. 좋아요 73개 감사합니다. 좋아요 74개 감사합니다. 좋아요 75개 감사합니다. 좋아요 76개 감사합니다. 좋아요 77개 감사합니다. 좋아요 78개 감사합니다. 좋아요 79개 감사합니다. 좋아요 80개 감사합니다. 좋아요 81개 감사합니다. 좋아요 82개 감사합니다. 좋아요 83개 감사합니다. 좋아요 84개 감사합니다. 좋아요 85개 감사합니다. 좋아요 86개 감사합니다. 좋아요 87개 감사합니다. 좋아요 88개 감사합니다. 좋아요 89개 감사합니다. 좋아요 90개 감사합니다. 좋아요 91개 감사합니다. 좋아요 92개 감사합니다. 좋아요 93개 감사합니다. 좋아요 94개 감사합니다. 좋아요 95개 감사합니다. 좋아요 96개 감사합니다. 좋아요 97개 감사합니다. 좋아요 98개 감사합니다. 좋아요 99개 감사합니다. 좋아요 100개 감사합니다. 좋아요 101개 감사합니다. 좋아요 102개 감사합니다. 좋아요 103개 감사합니다. 좋아요 104개 감사합니다. 좋아요 105개 감사합니다. 좋아요 106개 감사합니다. 좋아요 107개 감사합니다. 좋아요 108개 감사합니다. 좋아요 109개 감사합니다. 좋아요 110개 감사합니다. 좋아요 111개 감사합니다. 좋아요 112개 감사합니다. 좋아요 113개 감사합니다. 좋아요 114개 감사합니다. 좋아요 115개 감사합니다. 좋아요 116개 감사합니다. 좋아요 117개 감사합니다. 좋아요 118개 감사합니다. 좋아요 119개 감사합니다. 좋아요 120개 감사합니다. 좋아요 121개 감사합니다. 좋아요 122개 감사합니다. 좋아요 123개 감사합니다. 좋아요 124개 감사합니다. 좋아요 125개 감사합니다. 좋아요 126개 감사합니다. 좋아요 127개 감사합니다. 좋아요 128개 감사합니다. 좋아요 129개 감사합니다. 좋아요 130개 감사합니다. 좋아요 131개 감사합니다. 좋아요 132개 감사합니다. 좋아요 133개 감사합니다. 좋아요 134개 감사합니다. 좋아요 135개 감사합니다. 좋아요 136개 감사합니다. 좋아요 137개 감사합니다. 좋아요 138개 감사합니다. 좋아요 139개 감사합니다. 좋아요 140개 감사합니다. 좋아요 141개 감사합니다. 좋아요 142개 감사합니다. 좋아요 143개 감사합니다. 좋아요 144개 감사합니다. 좋아요 145개 감사합니다. 좋아요 146개 감사합니다. 좋아요 147개 감사합니다. 좋아요 148개 감사합니다. 좋아요 149개 감사합니다. 좋아요 150개 감사합니다. 좋아요 151개 감사합니다. 좋아요 152개 감사합니다. 좋아요 153개 감사합니다. 좋아요 154개 감사합니다. 좋아요 155개 감사합니다. 좋아요 156개 감사합니다. 좋아요 157개 감사합니다. 좋아요 158개 감사합니다. 좋아요 159개 감사합니다. 좋아요 160개 감사합니다. 좋아요 161개 감사합니다. 좋아요 162개 감사합니다. 좋아요 163개 감사합니다. 좋아요 164개 감사합니다. 좋아요 165개 감사합니다. 좋아요 166개 감사합니다. 좋아요 167개 감사합니다. 좋아요 168개 감사합니다. 좋아요 169개 감사합니다. 좋아요 180개 감사합니다. 좋아요 181개 감사합니다. 좋아요 182개 감사합니다. 좋아요 183개 감사합니다. 좋아요 184개 감사합니다. 좋아요 185개 감사합니다. 좋아요 186개 감사합니다. 좋아요 187개 감사합니다. 좋아요 188개 감사합니다. 좋아요 189개 감사합니다. 좋아요 190개 감사합니다. 좋아요 191개 감사합니다. 좋아요 192개 감사합니다. 좋아요 193개 감사합니다. 좋아요 194개 감사합니다. 좋아요 195개 감사합니다. 좋아요 196개 감사합니다. 좋아요 197개 감사합니다. 좋아요 198개 감사합니다. 좋아요 199개 감사합니다. 좋아요 200개 감사합니다. 좋아요 201개 감사합니다. 좋아요 202개 감사합니다. 좋아요 203개 감사합니다. 좋아요 204개 감사합니다. 좋아요 205개 감사합니다. 좋아요 206개 감사합니다. 좋아요 207개 감사합니다.

I'd love to see this taken a step further and made to run with fuel, and operated by remote control solenoids, maybe fitted into an RC plane

now i know how people like you contributed to world with their hard work and Passion. simply wow...

Ok, so build another one, and mate it to this one in the proper orientation, then put a 3 bladed prop on it, and put it into a scale correct F4U Corsair...... :D and make it an RC plane to boot !!! MAN what a work of art this is!!!! You've sped things up when they should be, you show detail, no crappy annoying music, I mean just WOW!!!!! VERY fine piece of craftsmanship there!!!! Wonder what kind of horsepower it has..... HMMMMMMM :D Very cool WASP Radial imitation for sure!!! Thanks for the vid!!!

i have no idea of what that is but is cool to watch

I miss machining! Watching a lathe do it’s thing is so therapeutic 😊

Oh my God, it’s incredible!!!

Man! You have a wondrous gift. I hope you give thanks for it! Beautifully crafted.

Am i the only person just realising that whatever he is makeing at the time its showed in the top right of the video

Anyone else watch these tiny parts being milled/drilled and thinking the whole time "don't break, don't break, don't break..." >< lol

All this hard work deserves much more credit than has been given

Very detailed on Machining all the pieces on the lathe and then assembling it together. I love projects like this. Thank you for sharing and the time it took to build it. You’re extremely talented and hope to see many more projects of yours. Great work. 👍

Tony Stark’s arc reactor alpha stage. No Palladium core. 😂 This was so asmr! Moar moar!

I have no clue what this is but its very satisfying

Beautiful! Thank you.

Totally crazily amazing! It's beautiful! What a pity I don't have the equipment to make anything like that! My congratulations!

This is clearly techno porn. So nice machined. Just wonderful job.big like

These tools are so cool. How I would love to have a shop with even half of this stuff.

２９分があっという間に過ぎた動画です。ただただ感心するばかりです

Cool design, and while I know it would be impractical, I would love to see someone take the challenge of making a purely-electric implementation of this in a boat. Use a jump charge to start the engine, have something like wave converters on the underside to charge a cell bank, then directly drive the engine once the bank's charged. I know nothing about engineering, however, so just an idea. Great video!

Excuse me, the core of your coils isn't pheromagnet. If you will make cylinders of steel or another pheromagnet your engine will be more powerful.

Really perfect 👍👍👍👍👍👍👍👍👍👍

Love to see more on how the motor works and the materials you use.

That is a very nice Project! But I personaly think it may look prettier if you build the rounded engine-cover on one side out of see-through material, so you can see the crankshaft turning. I find the turning of radial engines very beautiful, so I think that would make this already very nice engine even prettier to look at!

That's wonderful ! Great work ! How many lathe/milling machine do you have ? What are they ? Thank you :)

Now we need an extended version of the engine sound. mhm

at one point i forgot what he was making, just so satisfying watching the machines work

I don't know why, but this thing make me the baby's delight. Good job!

Fit a fly-wheel onto it, it will run much smoother.

who here watched this because it was satisfying?

I can make a mean bowl of cereal so there's that.... seriously though this is one of the most well shot well performed just most addictive video I've ever watched on UKposts. One of the most brilliant things I've ever watched being made / done simply magnificent. You have some truly brilliant people out there then you have people like me who can barely follow the damn video, great job man.

I wish I had your workshop. And engineering skill. I would have built my own vehicle by now and been able to automate most of the stuff in my home too.

Can't believe you didn't break any of those tiny bits 😂