Imma do this one day and it’ll be because of you 🤞🏼💯 #inspired

You should start selling these, I’d buy so fast😂 they are sick!

The tiny electromagnet as the steering is incredibly genius

I never knew this type of modding was a thing. I'm totally into this as a hobby.

This dude has hit the golden sweetspot : Cars, Drifting, RC, DIY, Kraftsmanship, Novelty.

underrated af, this guy really is up there with JDP and Tolle’s

I never realized how many adults religiously collect hot wheels until I worked at the toy section in Walmart. #1 question is when are the next shipments of hot wheels arriving. 💀

WOW...these things had been my imagination since I was a kid...it was not possible during 40years ago (would be extremely hard and expensive to obtain), but it's now become reality, well done mate 👍👍

Thank you for the tutorial, this is the best video I’ve seen for 1:64 RC! Diorama shots and the effect those headlights put out are next level.

That zoom on a missing tire was epic

Amazing! The engineering that went into this is impressive.

just bought my own walmart adventure force rc specifically to do this, i feel like its a good way to get into it without forking out an arm and a leg for hobbyist stuff, plus i find this really cool! inspired me

The amount of talent and creativity you gotta have to do this is insane!

it's amazing what you do 👏

Man that was sick. I wish I had the skills to work with parts that tiny. I had a Honda Civic RC car from RadioShack just like that, as a kid, it would have been beyond cool to have turned it into a drifter.

This is a complete build video. It has...… body work, custom paint job, custom frame build, 3 piece wheel fitment, transmission upgrade, Custom steering rack with camber and toe alignment. Props to this guy and his project.

This is just mind blowing you can engineer such small parts so precisely!! Wow....

if hot wheels actually produce these stuffs, they'd definitely sell out.

This was so much cooler than I expected great work !

Picked up two of these tonight because of this video!

This is LITERALLY my childhood dream just to have a hot wheel that can drift AND ONTOP OF THAT you can fit it in your pocket

You know it's cheap when a tire's missing

I've always wanted to make RCs out of my hotwheels growing up. I may have to try this someday.

Loved this!!!! I have a Dremel and soldering iron. With those exact tweezers. I might have to do this

Funny how making the wheel arches bigger with a grinder on an actual car is a universal technique, regardless of size.

Your projects are always on Top🔥 keep it going (/remote), much love from Germany! :D

Phenomenal stuff. Thanks. I got into hobby rc'ing a little while ago. Became obsessed with increasing rpm via a multi micro belt and pulley system. Now im getting into micro rc stuff. This was great.

Wow! Amazing work, the garage diorama too!

As sooon as u pulled out the hot wheel, im like hell yea!

Especially if I could choose the car body I’d definitely be interested.

Amazing video! The rims are super clean! Fine tunning at its finest!. Amazing! The engineering that went into this is impressive..

I cant say other words but beautiful, amazing and unique craftship. Your are an artist

This is probably the coolest thing I’ve seen in a while. Great job!

This is the coolest video I've seen on UKposts for months. I'm definitely gonna buy some of those RC cars to swap the bodies. I don't think I'll be able to find the right rods and stuff for the other mods though. Have you considered making offroad mini cars with low gearing and lots of suspension? A custom RC Bronco would make a nice addition to your collection

That is just awesome 👌 👏 ... Great job on making that pocket drift car

Fenomenal work! Best UKposts vid I’ve watched for the last 3 years hands down

I’ve waited so long for this! Sick🔥

you made a awesome car that was just going to be thrown way, and made other people able to do it too. thats just sick!! :)

Cooool end product! Looks like a legit tuner car. You should probably add another bar that connects the wheel in the front to make them sync better and to make it more stable

i thought this was THEE BEST VIDEO EVER. and then he pulled out onto a tiny race track omg!! yes! thank you

You are a true engineer! Great work. Can’t wait for your other videos.

I'm not sure why I got recommended this video, but you have an incredible skill set. This was fascinating.

This guy knows what he is doing! +Respect

Amazing video! The rims are super clean! Fine tunning at its finest!

I really like your garage/hangout area diorama and I think your cars are cool aswell

Hey I just did this and used a 1977 Dodge Ramcharger “Top Hand” die cast body. Cool to see your version! Well done. Looks great.

Ahhhhh the BRZ. The best looking car you can get😌❤️

Ure the most insane miniature car maker that ive seen and only u do this kind of work on youtube ima supproting u

Ayyo! Shadow drop!! Nice!!! Much hype!

Using guitar string as a neutral steering guide is pretty cool, out of the box thinking, the whole process is masterclass.

Wow, that’s awesome! Great video!! I like your mini roads and garage

Just gotta say this is so dope man! I gotta try this someday man I used to be right into customizing my hot wheels and I found a few I did up back in the day! Very Cool video!!

This is actually a freaking master piece tho! As someone that tried to do something very similar much respect to you sir! You do very fine work!

Dude! How is this hobby not mainstream! Love the content. Side note, Not a profetional tuner, but I don't think you want so much to out (10:08 for reference). For refernce, toe is the angle that the tires point at if you draw a line from the middle to the most forward part (if it's right side up) of the tire. Toe out IS good in most cases, (makes the car like going straight, but also causes the tire on the inside of a turning circle to drag) but that's a crazy amount. 12 degrees as a really crappy guess? The stuff I tune in racing games normally has maybe around one degree? Again, really rough. now, you said you shortend the steering rack to get more angle, which isn't stupid by any means, it works, but it causes this excessive toe effect. If you like how they feel regaurdless, great, I can imagine why, but I think there is a better shape for your rack that will allow you to run whatever toe angle you want and get as much angle as you want. I would suggest running a U-shape. Go up of the connecting pins like you would normally, but then go rear-ward on both sides for a little bit, it doesn't need to be crazy, then across. if you need to hook it to a servo thats right inbeteween the front wheels, then make more of a W-shape to go in and meet it. I have no clue if this would be really hard or not, because of the scale, but with the shapes I've seen you make for this, It should be terrable. If you want ideas on how to get more toe, or steering angle, shorter side to side length gives you more toe, longer front to rear should give it more angle.

One of the most satisfying thing I've seen today

Just beautiful man.. Great work 👏 🖤

How could you give this video a thumbs down? This is awesome!

You have talent. That is awesome. I could only imagine how much fun that is to drift around. Keep it up looking fwd to your next creation. 👌

we like those , the size is perfect to travel with!

When I realized I already have both of these toys I was like man I could do this, then I saw how many modifications you made and I'm like...respect lol

Big Probs! Love this !:) Greets from Germany!!

I fully did the same thing when I saw the same toy at Wal-Mart! At first I used bondo to make the bronco into a wide-body e-30 but then I put a Hot Wheels M3 GT2 Body on it. Yours is a little more meticulous than mine but I'm fixing it now thanks to you

This should be part of the exotic hot wheels series XD the glow up was amazing :D Good job on your project

The drift part 🔥🔥

Dude ur smart af, this is dope

Probably the most realistic drift I’ve ever seen

The amount of creativity is insane

Thank you. I did this to a truck that was a little larger than a hot wheels. These cheap little cars have a lot of parts for the money and “two way” steering 👍

The steering transformation so epic Man 👍❤️

Its awesome to see someone doing something out of passion and not for money cause trust me if you made your own line of toys like this you would stomp Matchbox and hot wheels. Your toys would sell like hot cakes.

Real slick move using those fit cut metal rings on the wheels man good shit 🔥💯 really badass how you built them steering mechanisms

You've just inspired me to take my minor electrical course seriously. Now I wanna learn it so bad. Amazing content!

thank you so much for putting a good parts list on you website and the wiring diagram. very worth it.

The modification is lit af, the explanation helps me alot. but the painting skill still got plenty of room for improvement.

Very NICE set up and cool drifting at the end! That looks like FUN!

you should make several projects of this and sell them, respect and admiration bro💯

This is amazing bro! Hoping to see more like that. Congrats on the project! Big hug from Brazil and God bless.

8:00 actually having that bar shorter will cause the front wheels to toe out. The little corner pipes attaching that bar to the wheels (or better yet, the setting of the motor, maybe have an extra gear that’s a different size) is what you change. Do not change that specific bar. It’s too small of a scale to get the toe just right. For those of you who don’t know what toe is, it’s how much the tires are pointing outwards on a horizontal plane. Toe out means the front of the wheels will point out and toe in is the opposite.

That’s awesome especially on something that small nice work 🔥🔥😎👍

I wonna make one if these right now.... you even did it with my dream car I love it

WOW! That is amazing 👏! You are an inspiration, I am on awe! I own that same toy, I put some stickers on it and added a better battery but I never even considered anything could be done like what you accomplished ! Thank you so very much for sharing!

damn bro, i was didn’t expect the finished😍😱 your work so great, you did well man !

Imagine having this type of talent🔥💯

This is the greatest UKposts video I've ever seen, I must have said "OMG" like 10 times

i wanna do this so bad but there’s so many things i’d need to get to make it. i already got the tiny rc and a shit ton of hot wheels but i didn’t think about all the extra stuff i need 😤

I like the people who can do everything in only one thing.

Amazing work. You should be proud

oh God so good. Perfect score

Probably faster than a real life BRZ. Nice job.

cara imprecionante muito talento parabéns.

this is so awesome well done my friend

You should do more of these! Very coo!

Absolutely Amazing, you should make custom builds for people and earn money by doing that. You could also make custom car bodykits with a 3D printer and do builds using them. Love your creative talent. :)

Dude... Contact mattel/hotweels, it would be great to have it on the market! And you should be hired, or in any way awarded for your creations! It's art in multiples ways. Really good job!

bro this guy is the best at making small yet cool rc cars/trucks or just anything (edit): you should add some underglow light

if "making it look easy" was a video lol i'm here from instagram and definitly interested in whatever kits you have available, this is dope

Are you going to make a parts list for this one? I would love to try and make one

Awesome 😎😁👍

Another talented custom maker!

Hundred percent you should start selling them. Loads of people would buy them and it’s never been done before with this quality keep it up 👍🏼