Making Lathe MILLING Attachment

4 роки тому

Is milling on a lathe possible?
I decided to convince myself and convert my lathe into a milling machine.
Installation of the attachment does not take more than a few minutes, so quite short. I can mill keyways, make longitudinal holes, or mill small areas.
I think that for a hobbyist it can be a good solution, but if you want to mill frequently, buying a milling machine will be a better option.
The vibration turned out to be a problem in my lathe. If I had a lathe that weighed a ton or more, it wouldn't be noticeable.
In general, I think the experiment was successful and I will use this attachment from time to time.
--------------------------------------------------------------------------
Some tools I use in my constructions:
Self made:
Belt grinder 2x48 - • DIY Belt Grinder 2x48"...
Vise - • Super Strong Hydraulic...
Drill press STAND with COOLANT SYSTEM - • Drill press STAND with...
and
Welder IDEAL Tecnomig 200GD
LATHE Cormak 330x770
Band saw Stiler BS 712R
Drill press ZX7016
--------------------------------------------------------------------------
Videos that you may like:
• How to make KEYWAY on ... - KEYWAY on the LATHE
• Chain Saw HACK 8 - 3H... - Chain Saw HACK 8 - 3HP Brushcutter
• Chain Saw HACK 7 - Dri... - Chain Saw HACK 7 - Drill Attachment
• Chain Saw HACK 6 - Ear... - Chain Saw HACK 6 - Earth Auger
• Wood chipper & Log spl... - Wood chipper & Log splitter - BUILD
• Making electric Roller... - Making electric Roller Bender Part 1/3
--------------------------------------------------------------------------
Social media:
FB: Made in Poland
Insta: made_inpoland
--------------------------------------------------------------------------
Music by UKposts library :
Canada
Fleas
Just Us League
Mexico
Princess
Wonton
--------------------------------------------------------------------------
DIY
Homemade
How to make

КОМЕНТАРІ: 915

@davidrodriguesmaia5383 4 роки тому

Amazing skills. Impressive!

@Mikefestiva 4 роки тому

Like always top quality build! Thanks for posting, this definitely could help someone out that only has a lathe and needs a way to mill stuff, the fact you make most of the part on the lathe it great! Thanks for posting 🙂

@bheckel1 3 роки тому

Somebody get this man a milling machine and microphone. Amazing video. Ingenious work. Thank you I really enjoyed it.

@scottfeeney8198 3 роки тому

Interesting execution of the desired result. I think your comments say it all. When it comes to engineering, which bench tool work is, then one needs to get the fit-for-purpose tool. But as always, your ingenuity and ability make it compulsory viewing. Thanks.

@dominicbianco3826 3 роки тому

I cant believe how clean his lathe is! Great job

@user-ft4zk1jc1n 2 роки тому

Существует вид станка демонстрационный и рабочий, но рабочий не означает грязный...

@geoffreynewton5839 2 роки тому

His bandsaw is a different matter

@Mroozik94 4 роки тому

Nawet nie wpadłbym na to, że da się na konwencji frezować. Wielki szacun dla Ciebie!

@pratikalure4306 3 роки тому

Partik

@IW4DBX 4 роки тому

I always love to see your works, it's very rare to see something done without possibility to improve it, because it is perfect born.

@MangalSingh-st1vq 2 роки тому

I always love to see your works it's very to see something done without possiblbility to improve It because it is perfect born

@regsparkes6507 4 роки тому

This is a very timely video. My brother and I were just talking about wishing we had a small milling machine. He does have a lathe. Now it's possible to have both, with this adapter head attachment. Thanks you for the clear instructions.

@buczo102 4 роки тому

Wyszło świetnie! Choć sam pracuję w drewnie, to uwielbiam oglądać jak Ty pracujesz w metalu! Szacun! :)

@seanmostert4213 2 роки тому

Wow! The world needs more people like you. Well done mate!

4 роки тому

AWESOME !

@hoernst2762 4 роки тому

Wiedereinmal ein kleines Meisterwerk aus Polen! Glückwunsch

@solomonflavius24 3 роки тому

You have amazing skills and imaginations

@DeanoD13 Рік тому

EXCELLENT INFORMATION FOR THOSE OF US WHO CAN IMPROVISE AND CONCUR MOST ANYTHING. YOU ARE A VAULT OF KNOWLEDGE, WE THANK YOU.!!

@upward_onward 3 роки тому

If only I was at your home town,I would have given my a month labour hours for free to help you in any way its possible. Thank you is an umder statement for helping humanity.

@badgermcbadger1968 Місяць тому

Same

@alonfreaman587 4 роки тому

Your all works are fantastic. You are 10 stars !!!

@fernandonautica9161 4 роки тому

Perfeito, parabéns!

@carlomonsen 4 роки тому

Amazing! Keep up the good work!

@fireforcecreative 2 роки тому

Brilliant! You have given hope to so many people who can't afford a milling machine, but could emulate what you have worked out and achieved! thank you!

@lds8401 4 роки тому

Dude you are so young and yet so skillful. Congrats and thanks for the video.

@jnhook8086 2 роки тому

All of your diy jigs / tools are always so well engineered. I've been watching you since you were making your own drill powered lathes in a small garage and I thought, wait till this guy builds up his tools / shop and he'll be the #1 diy jigs /tool guy on UKposts. Keep it up brother, we need your ingenuity. God bless

@josea.rivera4335 4 роки тому

You're tha man!! Incredible ingenuity and skill !! Give you a 10!!

@markhedquist9597 2 роки тому

And there you go! Now you have a mill! This is the second time I've watched this video. Worth watching again. Nice build, man!

@totallynotabot151 3 роки тому

Nice job! I did a similar thing conversion with a mini lathe and the two issues are rigidity and the general inconvenience of mounting work sideways instead of horizontally.

@olronholleran1310 4 роки тому

Exelent project, a handy tool to have in a small shop that could handle one of those trickie little milling jobs without a Bpt like mine. Good job

@thomasdoherty6876 4 роки тому

Just need some ballasts to counteract the vibrations, great build as always 👍

@janusszakazu9318 4 роки тому

Tokarka przystosowana do pracy jako frezarka pozioma. Tego jeszcze nie grali. Szacun. Polak potrafi !!! 👍👌

@Kyokunek 3 роки тому

Dawno dawno temu..:) firma z Anglii która zowie się Myford wprowadziła milling attachments do swoich tokarek ml7 i super 7. Do dzisiaj są na wyspach powszechnie używane. A tutaj nasz rodak radzi sobie sam🙂 tak przy okazji to super kanał..pozdrawiam!

@bostedtap8399 4 роки тому

Excellent modification, and very well done. I think the vibration maybe from the carriage slide gib clearence. Thanks for sharing.

@larryschweitzer4904 4 роки тому

Nicely done. It allows some milling at angles that would be difficult any other way. The vibration is from the overhang, just inherent in using the carriage that way. If you could get the center of cutting forces closer to the center of the cross slide it would (probably) reduce the vibrations.

@schmidwalter9191 2 місяці тому

😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

@andreusdelporto1984 4 роки тому

Grande, sei sempre il numero uno per inventiva e precisione nel modo di lavorare!! Grande

@t.s.racing 3 роки тому

Thank you Sir from 🇺🇸. I always look forward to learning from your videos. Thank you.

@albertodiaz4783 4 роки тому

Excelente herramienta, gracias por compartir.

@marciojacomini774 3 роки тому

Parabéns pelo maravilhoso trabalho ,vossas explicações foram de grande sabedoria, sou de contagem mg Brasil .

@davidrichards5594 4 роки тому

Just found your channel, instantly subscribed. Great work, you could even mount a small rotary table on it to do the curved slots in the one you make for me......Dave

@AREAJ27 4 роки тому

Excelente trabalho e projeto!Obrigado por compartilhar!Minhas saudações do Brasil!

@1tonygunalan 4 роки тому

I enjoyed watching your hard work videos which carries subtitles. I wish other would add subtitles. You the world waited for. Thanks.

@JeremieTarot 4 роки тому

Another great one 👍👏 Now, time for a live tool attachment! 😜 Would have been very helpful to cut the arc slots in the round plate.

@DineshPatel-cx2vi 4 роки тому

Ha 😂😛

@agoogleaccount2861 4 роки тому

every lathe owner should have one of these and a toolpost grinder . that's another great and super useful homebuilder machinist project

@Amoreyra1 4 роки тому

Excelente! Saludos desde la Ciudad de México

@cHudYPnO 4 роки тому

Niesamowicie się Ciebie ogląda, pomysłów masz bez liku. Pozdrawiam!

@aaronwood3540 4 роки тому

I think you can mill on a lathe plenty good enough to do the things you do. Sure help you out making slots and key ways. Dam sure better than the way you've been having to do it. Nice job!!

@masoodkhan6012 4 роки тому

This is the best video i saw on UKposts 👍

@ae.philipe 4 роки тому

Incredible! Thank you very much!

@odarn8911 2 роки тому

Absolutely brilliant! One of my next projects for sure!

@iamnickyj 4 роки тому

Great video! I love the quality of your work and your ingenuity.

@pawelaco 4 роки тому

Super, dobra robota jak zawsze. Pozdrawiam

@ilsoncsantos 4 роки тому

.Congratulations for the video, for the work and especially thank you for the idea. It was really good. Now the last milled ... The machined surface has been practically polished. It was a great show. Congratulations

@MsSebastianRuiz 4 роки тому

OMG! awesome attachment! thanks for share!

@MechanicalRhino 4 роки тому

Very well implemented, Good Job👍👍 Steel tends to vibrate easily, so machine beds are made of cast iron to absorb the vibrations. You could fill the connecting tube with sand that might catch some Vinbration. Or you try to make the construction a bit stiffer with some extra steel.

@ignilc 4 роки тому

A better solution would be to fill it with concrete. I did that for my drill press and it works much better

@mughalikram7051 4 роки тому

👋👋👋👍👍

@user-ik1yy5jb2w 4 роки тому

Молодец мужик, идея хорошая, поддерживаю тебя. Привет вам большой из Смоленска и Смоленской области )

@user-mg4kf9lp5d 4 роки тому

Я сам такое проходил. Эта полумера! Даже самый простенький фрезер будет в разы лутьше.

@user-yc7qm1tu9q 4 роки тому

Привет Смоленск и Смоленская область!

@elisoncorreadasilva4937 2 роки тому

Sensacional, um show! Há tempos que eu venho tentando projetar um dispositivo desse tipo, vou copiar do seu, Obrigado por compartilhar suas experiências e sabedorias, você é um grande profissional, um grande professor, parabéns!!!

@JEPhotodesign 2 роки тому

1:33 Working the Chuck with a Power Drill...such a great Idea!!! Thanks for the good video...keep on turning...

@Cpl.Cadaver 4 роки тому

Damn fine work there son.

@pazur199 4 роки тому

Genialne jak z tokarki zrobić frezarkę. Dwie maszyny w jednej, takie rzeczy tylko w Polsce.

@ZloyBober77 4 роки тому

Приятно смотреть когда человек работает руками, а не языком! Привет из Сибири!

@pieterbotes8938 4 роки тому

Excellent idea brother. I will definitely try it. Well done.

@MadeInGarage 4 роки тому

Hi, good job! I have to make a similar design.

@godwantsplastic 4 роки тому

I made a similar Jack/clamp for my mill last week. It works so goddamn well that I’m making a bigger one this weekend!

@tom98988 4 роки тому

Jest potencjał, brawo na stojąco!!!

@adamluka7984 4 роки тому

thank you so much from Algeria )

@billoxley5315 4 роки тому

Nice job. If you can get your work alot closer to the cross slide,it may improve the vibration issue.

@skatewithvanz 4 роки тому

Bill Oxley and weld those plates solid it will improve the rigidity aswell also get a collet chuck and you will be able to make sure your endmills dont have runout wich can lead to chatter vibration and shortened tool life

@patricknovakdepaula889 4 роки тому

Muito bom parabéns pelo trabalho.

@dziggy3004 2 роки тому

Thanks... digging in to start a similar lathe-milling conversion project... All the recent noise that I'm reading about vibration/chatter with similar solutions is bursting my bubble! I'll be trying to eliminate as many sources as possible in the process. DUNNO! Time will tell!

@davidlammas3629 3 роки тому

So good,,, I will be making the same and I can't see any way of improving what you have, thank you for the inspiration 🙏

@Korsh_Un 4 роки тому

Ай красава! Хорош:) Мужики, привет с Поволжья!

@Andreika-63 4 роки тому

Привет с Самарской области!

@amacf1 4 роки тому

Excellent project. To produce such a video takes skill and time. The clarity of the video and process is excellent. Two observations if I may for viewers watching this video to learn machining operations. 1. Only use a three jaw chuck to hold machined concentric surfaces only! Holding un-machined surfaces ruins the accuracy of the 3 jaw chucks scroll or the back of the jaws scroll. If you have two 3 jaw chucks then paint one a colour for general holding. 2. Welding on a precision machine is not recommended as you can introduce arcing within the precision ball/roller bearings. Having said that you did the right thing in protecting the lathe and had the earth clamp right next to where you are striking the arc. This in no way a criticism as I admire you ingenuity and flair to get the job done. That's why I enjoy your videos. Cheers from down under Amf1

@cristobalfernandez7903 4 роки тому

Amigo Exelente idea gracias por compartir

@mountainviews5025 4 роки тому

BOOM wow I've seen people doing this well the same idea and it worked well very well but your making art as well looks and works extremely well so Proud of you Son thumbs up my friend wow

@glennmoreland6457 4 роки тому

""is milling on a lathe possible"...? You can do owt on a lathe with the right tooling and attachments...🇬🇧👍

@clist9406 4 роки тому

Machines do not know the difference as long as the tooling and supports hold and enough motor you can do whatever you want. Just watch your fingers, keep them clear. In a full-face helmet doesn't hurt either

@theonlybuzz1969 4 роки тому

Yes it’s possible, I have done key way slots in shaft this way, after all the lathe is like a milling machine on it’s back .

@FastSloW-qt8xf 4 роки тому

Yes you can mill on a lathe... however its awful...

@jpategaremodeling8027 4 роки тому

The Mother of all machines!

@paultomat7125 4 роки тому

Yes, you can mill in a lathe. The tool goes in the chuck. The work is mounted, where the toolpost is.

@metricstormtrooper 4 роки тому

You're a smart man indeed Mr Made.

@johnstonewall917 2 роки тому

Great video. Unlike many similar videos the interest was maintained to the very end. I hope you have many successful projects using this jig.

@danieldsch 4 роки тому

Muy bueno....no solo hay que tener las herramientas...si no también la capacidad para hacer estos trabajos. Felicitaciones.

@alexanderlytkinson 4 роки тому

Perfect. As usually.

@user-gx3vo3pd4x 4 роки тому

Вставлять кулачки с помощью шуруповерта-это бомба. Желаю удачи.

@man_craft5947 4 роки тому

Объясните, этого делать нельзя? Я не токарь.

@user-gx3vo3pd4x 4 роки тому

@@man_craft5947 делать можно. Просто неожиданно. Бывает лень долго крутить , а здесь шуруповертом. Круто. Желаю удачи.

@rogero9633 4 роки тому

This appears to be a well made attachment for your lathe. It seems to be satisfactory for the need you have at the time. I agree that a full milling machine would be nice, but it I more expensive. Well done and thank you for your video. From Salem, Oregon USA

@donotwantahandle1111 7 місяців тому

Not only did you make a vertical slide holder, you showed how it could do some jobs!

@ifell3 4 роки тому

Still wish you would show us the product in the begining. Great bit of kit.

@janeblogs324 4 роки тому

This is why I skip his vids

@ifell3 4 роки тому

@@janeblogs324 I don't skip them but am guilty at skipping to the end aha

@sean7193 4 роки тому

Thank you, I am going to do this. Would you have done anything differently if you did it again? If so can you explain? Thank you!

@alexv.d.h.7331 4 роки тому

If you are going to do this definitely use some kind of collet chuck to hold the endmill, a 3 jaw chuck is not made for this and probably the cause of a lot of chatter in this setup.

@ianmcchickenlover3704 4 роки тому

@@alexv.d.h.7331 Also use a better vice. The one shown is meant for drilling and from experience not well suited for milling.

@addictedtoair1351 3 роки тому

Maybe that 90 degrees pipe stand

@MCsCreations 4 роки тому

Beautiful work, dude! Really well done!!! 👏👏👏👏👏😃

@divertechnology 2 роки тому

lathe to milling machine, it feels so real. great hack for those who can't afford a lot of expensive machines.

@user-ft4zk1jc1n 4 роки тому

Давно уже сделал такой перпендикулярный стол для фрезеровки для 1К62.

@user-vh5tt2hw2j 4 роки тому

Полякам привет с сибири.

@antonio_xyivam 4 роки тому

Я смотрю , этот мудак не ставит лайк под комментами на русском.

@user-vh5tt2hw2j 4 роки тому

@@antonio_xyivam не той мы национальности для него что бы лайки нам ставить. Но нам поебантус. 😄👍

@user-wv9lq6vk6y 4 роки тому

Привет с Ярославля

@user-vh5tt2hw2j 4 роки тому

@@user-wv9lq6vk6y во так нормально, у нас тут свой чат.

@chevchelios5994 4 роки тому

Да зажралися там)

@grzegorzzajac1983 4 роки тому

No to jest skok technologiczny w warsztacie Brawo

@violacaipira7019 2 роки тому

Uau! O torno virou uma fresadora! Sem palavras!

@nevillereddie6565 4 роки тому

Very cool gonna make myself one

@adamluka7984 4 роки тому

The same here bro

@tectalabyss 4 роки тому

Really like the design. I Liked,Shared,Added to playlists. All my best.

@MadeinPolandChannel 4 роки тому

Thank you very much!

@lukaszmatejko9296 4 роки тому

I tu mnie zaskoczyles !!! więcej takich jak ty a wtedy to z zachodniej granicy będą na nas pracować przyjeżdżali pozdro

@user-cm8vt5nw7f 9 місяців тому

شكرا ياصديقي انا من اليمن ومهتم جدا بالتصاميم الهندسية، هذه المخرطة حتي يومنا هذا، ليس لها حدود ،مجالها واسع جدا وهي ساحة كبيرة للاذكياء فقط، اعجبتني فكرتك في بساطتها رغم انني بالامس شاهدت فيديو مماثل لمحترف ياباني swap lamp لكن طريقته كانت معقدة ودقيقة بنفس الوقت وتحتاج الي معدات اخري لكن طريقتك مبسطة، تهانينا ياصديقي عمل موفق🎉❤

@kzik1943 4 роки тому

god idea! nice!

@JNP-2 Рік тому

I think that if you shortened the stud coming out of the y axis housing and only used one plate to secure the vise it would be a lot more balanced, which may reduce vibration. Another issue is that the whole weight of the assembly is held in place by the two bolts designed to hold just the top slide. Making a stronger mounting system would also help, likely a lot more than just lightening the front end.

@robertdaly9036 4 роки тому

Top quality workmanship. 👍👍

@brainfornothing 4 роки тому

Thanks for sharing !

@_zzpza 4 роки тому

It looked like a little deflection due to your feed pressure when you cut the keyway. I guess there's some free play in your carriage, most likely because it's having to take forces in a new direction. Very impressive build overall, but I understand your reluctance to recommend it as a milling solution. Beautiful craftsmanship though!

@TB110602 4 роки тому

One simple word - - - - - - Genius

@Leroys_Stuff 7 місяців тому

The humble lathe the only tool that can replicate itself

@youcefassou1592 3 роки тому

Well done thank you for sharing your experience and brilliant ideas

@user-ok2gy3re2v 4 роки тому

Гений! Респект! 👏👏👏👏

@paweisyn7446 4 роки тому

Ładne ustrojstwo wyszło :)

@MadeinPolandChannel 4 роки тому

Dzięki :)

@ronakdjking4242 3 роки тому

Did ft TCF. T ft y gzgxxgcof, CMO. Fd x ,, y cry. F,, f, did ft x. ,chug, g c xf fxfgyxff. X faff, f f c fu u, touch, uxygxfx,,fox, FC FC f, do, xffxfxx, xfgggg, f,, FC, xf xf xggggxxgx CT FFS, ,,f zcxzxx CT, xgg/xxxfxf FC cfccfc≧∇≦ฅ'ω'ฅ:-)~~(-::'(:-D:-D}:=)8-)(:(:0:-)8-)yztztfxf text, ugh UGC TV, ggyygy, z, z, gz≧∇≦ zxzfzgxgz,gygf

@Dodi-nz3fd 2 роки тому

@@MadeinPolandChannel , Please provide the address for this lathe dealer/distributor, in *Indonesia* ...