I'm 64 years old, but I still want to grow up and be like you! Great job with the engine build.

Matt, I'm a retired A.S.E master tech and I have to say that I couldn't have done a better job rebuilding that engine. The work you performed was almost surgical in nature and you paid attention to every detail. I hope you are very proud of the outcome and I hope the engine performs well into the future for you.

Matt, The fact that you took the time to go thru that engine CORRECTLY and have ADS do the pump is why it popped off on the first try. GOOD JOD!! It sounds really good. Gonna give you years of service.

Hillbilly or not a good job deserves recognition

I am a retired engine builder and it doesn't get much better than this. Pay attention, take notes, and don't give in to impatience, usually an expensive learning curve.

HOT DAMN ... she caught in 2 strokes and purrred.... Great Job Matt!!

Charlie is such an optimist. She is just so sure that you want to take a break and play fetch whenever she feels like it. :)

After a rebuild I'd say anti-climatic is a GOOD thing!! Well done!

Can never have enough clips of Charlie in your videos.

Great job Matt! She sounds so smooth and the fact it started on the first crank speaks volumes to your ability and skill. Way to go!

Your pre-start preparations, oil and diesel was what just as important to a first start, Matt . I say, do your magic on that Datto Z. I'd love to see it on the road again.

No problem startup! Area Diesel certainly did their part but all of YOUR care and attention to detail counts to the end result.

Your meticulous attention to detail is second to none. Great job as always. Really enjoy your vids. And thanks for the bonus footage of Charlie. She's a beautiful dog and obviously loves being around you. 🙂

Don't neglect the Datto too long. I've had a 84' Celica sitting half done for so long that I've forgotten were I was up to with wiring and hoses are already going stiff. But way cool to have the rebuild fire up on the 1st crank!!

As far as the pan gasket goes. You could make yourself a bolt bridge for it out of some 1/4” steel plate. It’s basically a long washed that goes all the way around the bolt pattern. A lot of older motors have it that have tin oil pans. Sometimes no mater what you do those tin pans will still leak. Nice work man. Really nice work!!!

Charlie loves her stick throwing routine, you can tell she’s having fun!

Great job. You deserve more credit than you gave yourself for the instant start. Area Diesel was certainly a factor but your attention to detail is what made it a successful first start. I'm looking forward to the next video. Thanks for sharing.

Great Job Matt! It was really gratifying just *watching* that engine immediately start on the first try. I can imagine how good that must have felt for you! Keep going with the excavator rebuild! I’m hooked! I want to see that thing running. You’re a lot closer than you are farther from the end. Of course, whatever you decide to work on, I’ll follow. It’s just enjoyable no matter what you do. Your whole approach to mechanics is enjoyable to watch.

The most beautiful engine rebuild ever. 🙏🙏🙏🙏🙏. Massive RESPECT, from Nagaland, India.

Anticlimactic or not, it big win in my eyes. Hydraulics used to be a mystery to me, but with your guidance I reckon it's making a lot more sense, so I hope the pump is next or soon after :)

Congrats Matt on a job well done - don't sell your self short - you attention to detail an methodical pace are a joy to watch - I look forward to your next video.

I haven’t done much this morning except watch your video of getting the engine going and boy do I feel accomplished thanks for all your effort and time sharing what you’ve done with this engine,,,very inspiring

Well Matt, you got exactly what you deserved. You did everything, well most things, that a pro would have done and it turned out really well. I must say that the surprised look on your face when it started first time was golden. You have a little gem there, just got to finish the rest of the excavator off now.

OMG ! It started first time and I guess no leftover parts! Well done.

Hi Matt! Was I surprised that motor fired right up and run sweet? NO! Your work is awesome, your attention to detail is amazing! Great move getting Area Diesel Service to overhaul the pump. A diesels nothing without a good pump and injectors. With your attention that machines gonna be a ripper! Whatever you decide for your next video….im watching! 🇦🇺🍺🍺

I know a lot of your viewers are as skilled as you in engine rebuilds; but, you're separated from the crowd because you can produce, direct, edit and publish videos encompassing the whole process. Thoroughly enjoy your videos. Thanks for sharing.

hey Matt, I'm quite sure you were the only one person in the world surprised that it worked on the first try!!! Excellent job!!!

The look of surprise on your face was priceless. You doubted yourself but we all knew it would run right away. Good job.

I liked the oil primer Matt. That was a cool startup.

Sounds great congratulations on a successful first rebuild on a diesel engine

Ha Matt, I think you should clean all the grease off the machine, spray it inside put the new harness in then the engine, that way you can clear the shop as you put it all back together. Engine sounded good.

I know that gave you great satisfaction to hear it running

Yess, I would love to see you working on the hydraulic pump instead of the car, I like your excavator videos, I don't like cars so I probably wouldn't watch a video on that

YOU ARE SUPER SMART AND KNOWLEDGEABLE. I DON'T KNOW WHO YOU WORK FOR OR WHAT YOU DO BUT THEY ARE LUCKY TO HAVE YOU.

Good to hear the engine fire up and run so well, Matt!

Omg! Pacific Northwest Hillbilly and CEE released their latest videos on the same day!!!

Looking forward to the install and operation of the machine. You have some digging to do? Yes rebuild it.

Matt, I love to follow your projects. I’m impressed by your dedication to detail. I’ve been working on equipment for over 50 years and I can’t believe how far you’ll go to get it “spot-on”. Most guys say “close is good enough” and it often is, but you don’t stop until it’s all on spec. I’d buy a machine you’ve reconditioned in a heart-beat! Please keep the content coming.

That engine PURRS holy cow! As far what's next, honestly the Datsun sounds like a fun side project! Hopefully no complete engine rebuild needed!

Engine sounds great. You should be proud of yourself.

So HERE is where the starship enterprise was born. You just changed the polarity in the engine room and away she went! 😀

I worked in the logging business In Winchester and Roseburg Oregon with Savage and Ramey log Loaders as the Hydraulics boss...any good pump is worth a good look and rebuild...We always used "Commercial Shearing pumps" and Funk drive plates...You have done a excellent Job to be proud of...I know personally how much work is required and the effort you put out...

A quick video getting the Z started would be good, just so YOU can enjoy it. I assume it's mostly going to be a full service and cleaning the fuel system to get it going. I would definitely go through that pump, or at least flush it thoroughly with fresh fluid - that's a LOT of work to redo if something happens once it is put back together.

Charlie is a pretty girl, good to see you Matt! Looks like you have everything under control brother, nice set up Matt! One thing is you always do everything right my friend! I really enjoy watching your channel, I’m sure everything will be a success Matt! She sounds great brother, I had no doubt my friend! You’re the MAN!👏🏻👏🏻👏🏻👏🏻👏🏻👌🏻👍🏻👍🏻

24:52, THAT LOOK, priceless! THANK YOU FOR SHARING!

Great rebuild job

Awesome achievement Matt! I couldn't believe it popped off like that but then I think of who overhauled it and am not surprised.

Wow! I don't think any diesel engine could have been rebuilt any better! You are definitely a professional at this! For regular oil use, I'd use Travellers from tractor supply. Really good oil at a really good price.

The cab. I usually prefer the mechanical stuff, but I'm looking forward to seeing you clean up that roached out cab. Maybe because it's so dirty and beat up.

That engine couldn't wait to start well done 👏

Congradulations ! that is a mile-stone for the excavator !

Now you have an engine! Dont have to worry about that sucker for a long while

Pump rebuild would be good to see. In my line of work we only replace the pumps and send them away to be checked/rebuild so it would be nice to see a rebuild. Great work on the engine rebuild she purrs like a kitten.

Hi Matt. I've been waiting for the start on this engine. I can't wait to hear it run.

How am I supposed to read Chenglish when all I speak is Spanglish.🍻

Matt, It was awesome to see her fire up. Spring is here! Well done. Looking forward to the rest of the rebuild.

Yeah, finally done! Get the Z out of the garage as little intermediate project ;-)

Hi Matt, great to see that all the hard work paid off with a near perfect initial run. Great channel

One I was looking forward too. Runs and sounds great...good job and all your hard work has paid off!!!! Running it on a stand will let you address those couple of leaks and the charging system as well. My vote is more Excavator stuff BUT I'll watch whatever you care to post!

Well done fella!!!

I love all your content Matt, I love seeing your dog enjoy time with Dad even more.

That's one big step for Matt-Kind and many, many more steps to go. It will be awesome.

I was wondering when we’d see you post again. 👍

Well, you did it. She sounds good to me. The startup was quick and easy. I would attribute that, at least in part, to the thorough job you did of priming the fuel system. We’ll be anxious to see it dig a hole so keep moving forward with next steps and get her assembled. Best wishes for the remainder of the job. 🥸👍👀✅

Stay safe and we'll see you next time.

Its one of those things where if you've done everything right it'll look like you've done nothing at all. always gotta hand it to mechanics that can fully disassemble an engine and put it back together better then new.

Big Congratulations! That was a great rebuild and then the run was even better! Thanks for taking us on the journey! Z next is my vote!

We of your fan base in Spokane salutes you sir! Well done

Sure sounds nice - great work to get it there.

Thanks for the update video. I know that it took a lot of time and money to get this far. I know that there is a lot of work left to do. Hang in there. One day you will have it done.

That is now better than new, excellent work. Very thorough rebuild, looking forward to the rest of the refurbishment.

OMG!! That start up!! She runs like a Top! Better than New! Wow. 👍

I love your comments “ that looks right, it should be ok, oops, I’m an idiot, what’s this for, and yet you come up with a beautiful result.👍

Amazing job mat be proud ,uk

Nice work, the engine sounds very good. 👍

Almost inspirational, but my wrenching days are over. That's why I watch you!

Taking out those blackberry bushes would be a good job for the D4.

Success Matt! Congratulations! And those were great shots of Charlie also.

I started watching your videos when you was doing your dozer but yes, it’s always nerve-racking when you fire up a new engine, gas or diesel but congratulations man keep up the good work God bless!

She sounds great Matt. Great job. Now the rest of the mumbo jumbo starts lol with all those hoses.

Your series on this rebuild is one of if not the best I have ever enjoyed. Congratulations Can’t wait until we see the excavator in use.👍👍😁🇺🇸

Wow!! Nice job on the engine. Sounds and runs better than new.

Congrats on finally getting ur motor to run great. lv this build.

Congrats on the success! I was worried when I saw the chapter markers, but that little engine sounds great.

If I could and you would, I would have you rebuild any engine I needed rebuilt. You are definitely a premium engine builder. You go the extra mile. It is very enjoyable to watch you work. Rebuild the pump. You have come this far. Your projects are built to last and therefore, have high value. Do you mind saying what you do for a living. I can't begin to guess.

That was worth the wait. Hydraulic pump, keep focused and get it all done.

Congrats on the first start, she sounds damn good

Unlike a DC generator, you have to have the battery connected for the alternator to function correctly. The alternator has electromagnets that need to be energized before it will charge.

Excellent job!

THANKS MATT YOU MUST FEEL VERY SATISFIED IN THIS REBUILD /I HOPE YOU CARRY ON WITH THIS PROJECT TILL ITS COMPLET/ THEN MOVE ONTO CAR PROJECT. CHEERS AND BEST WISHES TO YOU AND YOUR OFSIDER CHARLY.

We're back how sweet it is.

Excellent job Matt.

Nice Work! Great to see. This should get me motivated in rebuilding a couple of mopar 2.7s. Just need the time.

Hi Matt, I went back to episode 1 to refresh and enjoy this from start to finish and it was one of the most enjoyable and specific I have ever watched so kudos to you mate, you did a really thorough job, well done, one other item you can be sure of now when you are operating out in the field

25:27 congratulations young man 👨 👏 🙌 💙 ❤️ 💪 👨 👏

GOOD JOB MATT, SOUNDS REAL STRONG!

You are being way to modest. You have done a fantastic job, and it’s a joy to follow your videos.

You should be proud of that rebuild. Great job Matt!

Beautiful job!!!!! Sounds awesome!!!!!!

Matt,that vid.was excellent,you can take all the credit for the rebuild,i have to say that was like waiting in the labour ward,can report father and baby doing fine seemed to be a painless birth,thanks from Perth 🇦🇺👌👌👌👌👌👌👶