My Secret To No More 3D Printed Layer Lines
Переглядів 238,995
День тому3D Printing Fuzzy Skin With Bambu Lab A1!
Check out my recent video: • My Secret To Prototypi...
To become a Patron of my channel, visit www.jakegrim.com/patron
To purchase one of my inventions, visit www.jakegrim.com/store
Come chat with me and other makers: / discord
Amazon Affiliate Links To Support This Channel:
PLA Filament That I Used In This Video (MADE IN USA): amzn.to/3TnTunk
Textured Bed Plate: amzn.to/3wYbjls
Creality Resin 3D Printer: amzn.to/3THQ1BK
Creality K1 Max 3D Printer: amzn.to/3IDWJCg
Apple MacBook Pro: amzn.to/3VjL1Ek
Welcome to the world of innovative 3D printing techniques! In this tutorial, I'll show you how to elevate your 3D printed parts using a unique slicing method called "fuzz." Say goodbye to visible layer lines and hello to professional-looking products with minimal post-processing. Join me as I share my journey, failures, and ultimate success in achieving flawless prints.
00:00 - Introduction to the Fuzz Technique: Learn how to transform ordinary 3D printed parts into extraordinary creations with a simple slicing trick.
00:20- Exploring Traditional Post-Processing Methods: Discover the limitations and inefficiencies of sanding, priming, and painting for achieving smooth surfaces.
02:12 - The Quest for Better Manufacturing Solutions: Dive into the challenges faced with injection molding and resin 3D printing, and the search for a cost-effective alternative.
05:10 - Introducing Fuzz Skin: Uncover the revolutionary slicer feature offered by Bambu Studio, designed to add a textured finish to 3D printed parts.
05:40 - Understanding Fuzz Skin Variables: Learn how to optimize fuzz thickness and distance point settings for desired results.
06:30 - Experimenting with Fuzz Combinations: Gain insights from a comprehensive experiment to determine the ideal fuzz parameters.
7:14 - Implementing Fuzz Skin in Bambu Studio: Step-by-step guide on applying fuzz skin to your 3D models for flawless prints.
07:38 - Witness the Transformation: See the remarkable difference between standard and fuzz-enhanced parts, showcasing improved aesthetics and durability.
8:35 - Considerations Before Implementation: Understand the impact of increased print time and potential adjustments to design tolerances when incorporating fuzz skin.
09:14 - Embracing Failure on the Path to Success: Emphasizing the importance of perseverance and resilience in overcoming challenges and achieving innovation.
09:45 - Wake Hydro Alarm Clock: Visit wakehydro.com to experience the ultimate morning wake-up solution with our innovative alarm clocks.
Unlock the full potential of your 3D printing projects with the fuzz technique. Get ready to unleash your creativity and build something truly extraordinary! Don't forget to like, share, and subscribe for more cutting-edge tips and tutorials. Let's make the world of 3D printing even more amazing together!
SEO:
1. Efficient 3D printing techniques
2. Streamlining 3D printing post-processing
3. Minimize post-printing work
4. Eliminate 3D printing finishing steps
5. Simplified 3D printing workflow
6. Reducing post-processing time
7. Optimizing 3D printing for production
8. Enhancing customer-ready 3D prints
9. Effortless finishing for 3D printed parts
10. Seamless post-printing solutions
11. Smoother surface finishes for 3D prints
12. Automating post-processing in 3D printing
13. Creating polished 3D printed products
14. Cutting-edge slicing techniques for flawless prints
15. Improving print quality with minimal effort
16. Accelerating 3D printing production
17. Advanced slicer features for professional results
18. Efficient post-printing strategies
19. Achieving professional-grade prints with ease
20. Revolutionizing 3D printing finishing processes
21. 3D Printing Fuzzy Skin With Bambu Lab A1
Keywords:
#HowTo
#EducationalInventions
#DIYProjects
#InnovativeIdeas
#CreativeSolutions
#LearningHacks
#LifeHacks
#ScienceExperiments
#HandsOnLearning
#Edutainment
#FunExperiments
#CreativeLearning
#InventiveTutorials
#StepByStepGuides
#EducationalInnovations
#UniqueGadgets
#PracticalTips
#MindBlowingInventions
#EducationalDiscoveries
#EducationalDIY
#InnovativeTeaching
#DIYInventions
#ScienceForKids
#LearningThroughPlay
#InnovativeTechnology
#InnovativeDesigns
#EducationalExperiments
#ProblemSolving
#EducationalCrafts
#LearningWithFun
#HowItWorks
#InventiveDevices
#STEMEducation
#InnovativeSolutions
#ExploratoryLearning
#PracticalApplications
#EducationalEntertainmentIdeas
#HandsOnEducation
#UniqueCreations
#DIYForBeginners
#LearningByDoing
#EntertainingInnovations
#Edutainment
#EducationalHacks
#InnovativeConcepts
#ExperimentsAtHome
#ScienceMadeEasy
#CreativeThinking
#LearningMadeFun
#InventorsCorner
#InnovationsForKids
#EducationalGames
#DIYScience
#InnovativeProducts
#EducationalMagic
#FunWithLearning
#HandsOnExperiments
#CreativeEducationalContent
#DIYEducationalToys
#CoolScienceTricks
@matthiastilly5480 Місяць тому
Fuzzy skin is the one-for-all recipe to take away the 3d-printed look. We use it on all our products from the beginning - but: It comes at the cost of increased print-time! Always a good idea to apply it only to visible surfaces by using modifier blocks
@jakemgrim Місяць тому
Glad I’m not the only one doing it!
@AuDiGo6 Місяць тому
There is also feature "variable layer height" which also has nice results, especially for more organic prints.
@jakemgrim Місяць тому
No way! I’ve never heard of variable layer height! I’ll have to look into it! Thank you for sharing :)
@amil89 Місяць тому
can also save time! no need to print vertical walls at 0.12mm height, but can still get that detail in the curved parts
@jakemgrim Місяць тому
@@amil89 I didn’t even think about that! That’s an excellent point! Thank you!
@mthqwork123 Місяць тому
Shame that (at least in OrcaSlicer) you can't use variable layer height with tree supports.
@Oliver_Things Місяць тому
@@jakemgrim It is the weird stack of lines up along the top in the "prepare" stage. It is right the left of the "move object" button.
@fuckutube65 Місяць тому
The fuzzy skin is not a "Bambu Studio" feature. It's originally a Cura feature that got ported over to Prusaslicer (which is the basis for Bambu Studio) long ago..
@R34l1ty4U Місяць тому
While still under "Experimental"
@jakemgrim Місяць тому
Good to know! Thanks for sharing!!
@jakemgrim Місяць тому
@@R34l1ty4U allegedly…
@R34l1ty4U Місяць тому
@@jakemgrim what I meant its under the "Experimental" group of settings (you can search for it). I didnt even remember about it until your video. ;)
@MrGTAmodsgerman Місяць тому
It's not even that. It's basically a more simplified Displacement modifier with less options that you normally get with any 3d modeling software.
@Betruet Місяць тому
I've been using fuzzy on my prints for the last few weeks and I do like the results. I make alot of items with TPU and the the flexibility and fuzzy makes a great combo really gives my prototypes a next level feel. Great video thanks for sharing your journey!
@jakemgrim Місяць тому
I haven't tried TPU and Fuzz yet but it sounds cool! What kind of stuff are you printing? If you want to share pictures of the prints, you can post them in our Discord linked in the description!
@IlBiggo Місяць тому
Same here, I tried fuzzy on the Ender-3 v2 a couple months ago for a TPU button and it came out great both in look and feel. So I experimented a bit on PLA. My parameters of choice are 0.1, 0.1. It just gives it a silky roughness, like finished wood.
@yagoa Місяць тому
you can make only 20min extra by adding a modifier to remove the fuzzy skin on the inside, can I have one now that I saved you 1000 hours?
@jakemgrim Місяць тому
Wouldn’t that be the same as contour? Or would the modifier work differently?
@ggbartosz Місяць тому
@@jakemgrim Using the modifier, it is possible to apply a fuzzy skin only on the outer contour of the part, while using the 'contour' option makes it fuzzy even on the inside.
@jakemgrim Місяць тому
@@ggbartosz I see! I haven’t used the modifier yet. That makes a lot of sense! Thank you!
@yagoa Місяць тому
modifier is an added shape that encompasses a different setting (right click)@@jakemgrim
@Kawalzki Місяць тому
The modifier feature is like using a support blocker. It allows you to create a "zone" with custom settings. In your case I would recommend creating an obj or stl that is the exact same OD as you clock but solid, and just reduce the x and y by .1-.5mm and Raise by .1-.5mm that way you can import it with your model and it's already dimensioned properly.
@barretonaldo 12 днів тому
Bruh… I’ve used this setting before as a simple test, but it never thought about using it to get rid of the layer lines… valuable insight you gave me, thank you!
@Oliver_Things Місяць тому
I've been using fuzzy skin for a couple years now, and I think other slicers also have the setting too. as for tolerances, you can use modifier blocks to either enforce, or block fuzzy skin anywhere on your model. I use this for the phone mounts I designed and produce for my car. Fuzzy skin is an awesome feature, and even though I already knew about it, knew how to use it, and use it on a regular basis, I continued watching your video because of how well you made your video. It is structured very well, and easy to understand for even the most novice of printers, which I appreciate, and wanted to say GREAT JOB!
@jakemgrim Місяць тому
Thank you SO SO much! You put the biggest smile on my face :) I tried to make this video entertaining and informative for beginners. A bunch of expert level 3D printing people posted negative comments, but that’s okay thanks to people like you being kind and positive. If you haven’t already, you should consider joining our discord (link in the description) of other makers. I’ll be getting on there this afternoon to catch up on the conversation. Now I’m going to go for a run and exercise :) See ya around!!
@TheRich4187 Місяць тому
Love the video. I think the best part of 3D printing is the design and problem solving! Seeing an idea sitting on my table or workbench always blows me away. I don't care if it's a small custom poker chip or a large set of inserts for my board games. The fact that after a few hours or days something that didn't exist before I started does now is so cool! And the ironing out kinks until it's just right is awesome! Love the shared knowledge. Goodluck in all you do!
@jakemgrim Місяць тому
Thank you so much! I’m glad you enjoyed the video! Feel free to share pictures or videos of your projects in our discord linked in the description! It’s so cool to turn ideas into real life things! I hope to see you around with future videos!
@TrittTaylor Місяць тому
Yooo Ik this guy he keeps hanging around my school we don’t know how he go there tho
@jakemgrim Місяць тому
I’ve may have taught you a thing or two
@oriwan3786 Місяць тому
on the part of fuzzy skin and the tolerances. you can add a modifier cube or what it fit and just float it only on the outside areas were you want fuzzy skin. This way in your model only the outside is with a fuzzy skin and the inside is normal which now saves time and the tolerances will stay.
@jakemgrim Місяць тому
I wish I would have thought of that! Thank you so much! Hope to see you around friend!
@pinkpanther8427 Місяць тому
@@jakemgrimmaybe do a followup video on that. Im new in FDM Printing - this would be a nice quick tutorial Video, since i dont know what he means :D
@Oliver_Things Місяць тому
Also, you can do the inverse and add a modifier object in the areas where you do NOT want fuzzy skin and save yourself that post processing as well.
@jakemgrim Місяць тому
@@Oliver_Things wow! That might be even easier! Thank you!! I hope you stick around for future videos because you have some great advice!
@Oliver_Things Місяць тому
@@jakemgrim lots of trial and error! Keep up the good work!
@Calendor Місяць тому
Congrats for having the drive and pacience to go forward no mather the obtacles! For those who did not quite get it this video was made for people who mean bussiness, that are interested on the core of things, apriciate when someone openes their eyes and tells them they have been trying the wrong method to achieve their goal.
@jakemgrim Місяць тому
Thank you my friend! I tried to blend education, entertainment, and inspiration all into one video. I hope you stick around for future videos :)
@aqnuadziba1269 Місяць тому
Really cool that you didnt give up on it! You can printed this on resin printer, warping can be resolve with better supports and other orientation, britelness can be solved by using different resin (like abs from elegoo, tough AnyCubic or some mix) or settings (lesser curing time). But i dont think resin print wouldnt work for commercial product, cuz if its undercured it could be toxic, if overcured it would be too brittle, pref you need to paint then so no sunlight would desroy youre product. BTW love texture on fineshed clock!
@jakemgrim Місяць тому
Thank you so much for taking the time to provide feedback! I would like to try abs resin some time! I’m currently trying to print a statue of Walt Disney in resin to display in my lab. I hope you enjoyed the video and hope to see you again next week :) P.S. Let me know if you build anything awesome this week!
@gpweaver Місяць тому
@@jakemgrim What they said: warping/breaking off the supports is all about orientation. You don't want wide, flat areas parallel to the bed; it will stick HARD and tend to break off the supports--or, if you're using a magnetic print bed (which makes life so much easier), it can pull your bed enough to shift it off its magnet. You want the smallest cross section printing at time--so, I'd turn your clock body about 45 degrees, so no one side is parallel to the bed. Play with it a bit and you'll get a feel for the ideal angle.
@jakemgrim Місяць тому
@@gpweaver that makes sense now! I always wondered why resin prints were printed in strange angles. Now I know! I’ll give it a shot! Hope to see you around for future videos because I love feedback like yours :)
@denistremblay4713 10 днів тому
No failure, no improvement, Thank you for sharing
@jedisct1 Місяць тому
Long story short: try to check the "enable fuzzy skin" box if you still haven't.played with it.
@jakemgrim Місяць тому
Did you not like my story?
@citratune7830 Місяць тому
@@jakemgrimIt was nice, but some people want the info only.
@JacobHepworth Місяць тому
@@jakemgrim No, and it's not a secret
@jakemgrim Місяць тому
@@JacobHepworth what should I change to make it better?
@JacobHepworth Місяць тому
@@jakemgrimYou could maybe start by covering fresh topics. I was hesitant to watch but was hoping for info I had never seen. It felt like I was wasting my time rehashing something I see in my feed a lot lately. Fwiw, you're doing a great job on lighting, audio and all around production value.
@TimothyStovall108 Місяць тому
.3mm on both is what I found what looked best to me as well when I was testing things too last week. I've got a K1 Max and Neptune 4+ over the last few months, and have really been enjoying designing and creating things for people. It is really cool what we can do with 3D printing now a days.
@jakemgrim Місяць тому
That’s cool we both came up with 0.3! I’d love to see the projects your working on if you want to post pictures in our discord (linked in the description)!
@wannehaves Місяць тому
I heard about it but never tried it, now I will. 😊 Thank you so much. 👏🏻
@jakemgrim Місяць тому
It’s pretty cool! I hope it goes well for you :) I’d love to see what you make so feel free to share your results in our discord (linked in the description)! I hope to see you around!
@nathanwilmot9114 Місяць тому
hey jake, just found your channel through this video and i love what you’re all about. the information was given in a really easily digestible anger and the production of the video was great! definitely gonna subscribe
@jakemgrim Місяць тому
Thank you so much! I just got done replying to a comment telling me everything I did wrong. Your comment made me smile :) Feel free to join our discord channel to share projects and ideas with other makers! I look forward to seeing you around new friend!
@trentfolan529 Місяць тому
I'm just about to buy a 3d printer and have been thinking long and hard how it solve the layer line issue, since that's something that will bug me. Glad this video popped up and thanks for sharing!
@jakemgrim Місяць тому
There’s a lot of great printers out there! My favorite being Creality and Bambu Lab . It’s a fun adventure once you get started! Check out our Discord (liked in the video description) if you have any questions or want to share your projects once you get started! Hope to see you around!
@krzysztofpowinski6491 5 днів тому
Thanks for your time to test it💪😊I will try it today😎
@HarveyFoFi 12 днів тому
Wow, thank you. I am buying my first 3d printer ever (Bambu Lab X1C) in about 2 weeks. This will be a great help.
@maggieMakesMechs Місяць тому
I for one appreciated the story. I understand some people just wanted the single phrase “use fuzzy skin” but if you are a maker, these are all relevant steps/ideas you would try. Probably saved a lot of people a lot of time. Definitely was helpful for me!
@tartantriumph 8 днів тому
This is an excellent video. I'm learning 3D printing for car parts, and wanted to create dash parts that fit in without that "3D Printed" look. You addressed the issue perfectly and concisely. There's clearly a lot of data and time gone into this process - the editing is first rate. Thank you for this video, for taking the time and care.
@antronk Місяць тому
When you think the video is “hey, do you remember this feature from a few years ago?” but you get “come along to my journey of printing a box” :D
@jakemgrim Місяць тому
It’s like a box of chocolates, you never know what you’re gonna get ;) hope you stick around for future videos, friend!
@hobknot Місяць тому
I actually bought a 3d printed part that used this and it's really interesting to see how and why
@jakemgrim Місяць тому
It all comes full circle my friend :)
@swdgeldenhuys Місяць тому
THANK YOU for this tip... It is a real viable solution to a part not looking like a cheap 3D print
@jakemgrim 25 днів тому
Thank you! I’m glad you liked it!
@jasonvanhalle Місяць тому
Thanks for sharing this information - as a play-around-with-printers guy who also happens to be an engineer who works in manufacturing full-time, one thing I'll say is: you went to the wrong shops to quote your injection molded parts. The Xometrys and ProtoLabs of the world are fast and easy, and if they're not cheap enough for you there's other options out there.
@jakemgrim Місяць тому
I’ll check those out! Thank you for the advice!
@phreaktor 7 днів тому
ANy other names you can share? I received the same quote he did for a similar part from Fictiv.
@ggbartosz Місяць тому
Use modifier with fuzzy skin turned off so you dont need to sand down the fuzzy skin from where you dont want it ( 9:04 ). You can also do what Yagoa said in other comment and make fuzzy skin as a modifier, eg. cube, and overlap that with the places where you want the fuzzy skin to appear.
@jakemgrim Місяць тому
That’s awesome! Thank you so much for sharing that! I’ll give it a try!
@FrankP83 Місяць тому
how can be done??😮
@jakemgrim Місяць тому
@@FrankP83 hopefully I can figure it out!
@FrankP83 Місяць тому
@jakemgrim waiting for your tutorial Jake!However this night I've experienced the fuzzy with your 0.3 0.3 setting and the result is pretty nice!Thanks!
@jakemgrim Місяць тому
@@FrankP83 awesome! I would love to see pictures of the part you made if you’d like to share them in our discord! I put the link in the video description
@thecathode День тому
Great video! It surely contributes not only to avoid extra costs and effort to obtain a final product but also avoid a lot of polution with sanded microplastics and other harmful chemicals!
@Heislegend72 Місяць тому
One of the most helpful videos I have seen in a while, the fact that my A1 is my main 3d printer and I have been looking to get this effect on some of my prints is amazing as I randomly came across this video. Any additional tips you have for bambu slicer in video format would be amazing, your delivery is bang on and easy to understand !!
@jakemgrim Місяць тому
Thank you so much for your positive comment! It made me smile! I try to get better with each video I post. I need to dig around in Bambu Studio before I make another 3D printing video (about a month or so). My goal is one video like this per week, so I hope you stick around for future videos! The next few will be about microcontrollers, prototyping, and creating a product you can sell to customers. But have no fear, there will definitely be more 3D printing videos to come!
@jakemgrim Місяць тому
Also, I posted a video a few weeks ago on how to print TPU with the A1
@jakemgrim Місяць тому
Also also, if you want to share pictures and videos of your projects, I hope you consider joining our Discord community! I love seeing what other people make! The link is in the description :)
@gapingshanus 9 днів тому
Bro you got hammed on those quotes for molds
@andreslaiton3609 22 дні тому
Great video jake! Thanks for sharing your experiment results👌🏻
@jakemgrim 22 дні тому
My pleasure! Thanks for watching!
@OxKing Місяць тому
You can use modifiers to make certain areas fuzzy but keep those interlocking areas clean.
@kylek29 Місяць тому
There was a fork of Prusa where someone was trying to add the tessellation ability (think displacement/normal maps) to the slicer so you could do your own 3d texturing to the model without external tools like Blender, but I don't think it ever made it past a prototype phase.
@shandor2522 Місяць тому
It would be great if this were revived, to allow textures like woodgrain, leather, etc.
@yobtar Місяць тому
resin warping and brittleness is a direct correlation to the resin you are using.
@jakemgrim Місяць тому
Crap! Really? Which resins do you recommend I use?
@yobtar Місяць тому
@@jakemgrim If you plan to cast the materials they make casting resins. I would think you would want to go that route but Ive never used those. I have a Phrozen Mini 8ks and I use the Phrozen Aqua 8K 3D Printing Resin. And get no warping or anything once I have it dialed in.
@BrodieFairhall Місяць тому
Cura and Prusa Slicer (which bambu studio is built on) also have fuzzy skin. I'm glad to see more people using it and im glad you made a video about it (and the product journey), it has been available for years and barely seems to be mentioned.
@jakemgrim Місяць тому
That’s what people been telling me that it’s been around for a while. I think it does need more attention because I never heard about it until recently. It’s a really helpful tool if you put it in the right scenario!
@daniel1the2luberjack Місяць тому
Jake, use mesh cubes to interrupt the fuzzy skin features for parts that need the tolerancing, it's a little tedious, but 30 minutes of that saves you hours in post processing. Especially because fuzzy skin in randomized, and your average variance will vary per part.
@jakemgrim Місяць тому
Thank you Daniel! I never even considered that! That’s going to save a bunch of time! I hope you stick around for future videos to provide similar feedback to help me improve! You are awesome my friend :)
@Hotwire_RCTrix 22 дні тому
Layer lines on curved surfaces can be helped by choosing long top and bottom parters. Short lines that don't follow the shape are slow and the direction changes cause small ridges. Second is flow adjustment because even 1% variation can change the texture. Fine fuzzy means less tolerance problems and faster prints.
@davidharris5045 Місяць тому
TL, DR. I fell asleep 5 minutes in and never got to the punchline. Was there ever an ending? How is his neighbor doing today?
@user-wd9tt6wj2b 24 дні тому
Do you use ironing with the fuzzy skin setting?
@gilcd85 Місяць тому
8 minutes to say "fuzz skin". smh
@jakemgrim Місяць тому
Best 8 minutes of your life :D
@ReedGladifelther Місяць тому
Man stop hating get something better to do you loser
@danielsvamp Місяць тому
biggest lie@@jakemgrim
@MetalRhino42 Місяць тому
It was the first thing in the first 8 seconds?
@ragetist 25 днів тому
Personally I like to hear what other options the person has tried and why they chose this method, it gives me much more information to base my opinions on. Great video.
@LandauTST Місяць тому
I wish I would've seen this sooner before printing out some proton pack parts. I knew this feature existed but didn't think about using it for a more subtle texture. And I was going to get some spray on bed liner to add the texture my existing parts but maybe I'll just reprint them while testing this setting just to see how it goes.
@makers_lab Місяць тому
Fuzz works and your results are good, though the slowdown is quite a lot. When we tested it, controlling where it gets applied was an issue because it leaked through a USB socket hole and wrapped around on the inside, causing issues for some internal parts of the design. A way to paint on where it's applied or a smarter algorithm to limit it to the outside would be good. Something else we tried is Bambu sparkle filament, and that reduced the appearance of layer lines nicely along with a well tuned Bambu producing great surfaces anyway. Not to everyone's taste, but we had good results with boxes we've been making. I also printed something at either 0.12 or 0.08 which worked well. Longer to print, but then so is fuzzy, so if you're open to accepting longer print times, that's another approach.
@jakemgrim Місяць тому
I'm going to have to try that! Thank you for your feedback! Some people have commented about using a modifier such as the same STL file but increased by 0.2x and moved up slightly to apply the fuzz. I have not tried it yet though. Also, I'd love to see your finished results if you would like to share them in our Discord linked in the description! Hope to see you around friend!
@Rob_65 Місяць тому
Fuzzy skin is a feature that Bambu Studio inherited from Prusa Slicer. Most likely they also got if from someone/somewhere else 😉 It's hard to discover who originally made this. But that does not matter to me. I never looked at this feature or knew how to use it so kudos to you for learning me somet hing new 👍
@jakemgrim Місяць тому
Thank you my friend! I want to try it with my Creality CR-10 next! That printer is a tank! BTW I like your profile pic ;) Hope to see you around!
@tremor6160 Місяць тому
I love your calm, detailed and helpfullly informative presentation style! Subscribed!
@jakemgrim Місяць тому
Thank you! I really appreciate your positive feedback. I’ve been getting a lot of negative comments and yours made me smile :)
@CliffKajun Місяць тому
Ignore the comments saying you took too long to get to the point. Clearly they have time to post a comment, which makes their point invalid. They also have no idea what goes into making a video, including the joy of making a video with a story. Great story telling, info and production! Keep it up 🤘🏻
@jakemgrim Місяць тому
Thank you so much! Your invalid point comment made me LOL. Thank you for your feedback, you are 100% correct. Th process fills me with joy
@downey2294 25 днів тому
writing a comment takes like 10 seconds...
@alfredogonzalez9558 14 днів тому
How this works in cura slicer?
@TimmyM Місяць тому
This is actually really useful advice. I've glanced at the setting before but never really considered trying it as no one really suggested it and I figured it created actual fuzzy skin in the form of intentional stringing. Thanks! I'll definitely give this a go on our X1C soon.
@jakemgrim Місяць тому
Glad to hear this helps! If you want to share pictures or videos of your projects you can post them in our discord linked above! Hope to see you around!
@AndrewAHayes Місяць тому
I have used Fuzzy Skin on some parts when I was using Cura, however, I haven't used it yet with Bambu Studio and my X1 Carbon, another alternative is using CF-PLA or wood filament to hide the layer lines, I have recently bought the Ideaformer holographic build-plates and the first layer hologram patterns are just awsome.
@jakemgrim Місяць тому
Good to know! I’ve been wanting to test different build plates! You should share pictures of your results in your Discord linked in the description :)
@kevinpezzi6777 Місяць тому
Free medical advice: always wear a P100 mask while sanding and spray painting (ideally with VOC protection with the latter).
@jakemgrim Місяць тому
You are SO right! My buddy has been telling me that for a while and I need to do it! Any particular one you recommend?
@SneakyJoeRu Місяць тому
uv curing as well as heat treating resin prints is what you want for stiffness. They can come to a lefel of stiffness similar to fdm if done right. Stefan recently did this test.
@hrm8252 Місяць тому
Thank you for the video! ❤ Gonna try this out
@jakemgrim Місяць тому
You’re welcome my friend!
@Dweenz69 Місяць тому
Awesome Video appreciate your time with the different fuzzy skin settings. I wanted to say that you can eliminate the fuzzy skin from areas that need to fit together with primitive object as a modifier for those areas.
@jakemgrim Місяць тому
Good to know! Thank you for taking the time provide feedback! Hope to see you around in future videos :)
@paulroberto2286 Місяць тому
With regards to having to sand sections of your part for tolerances, you can 'paint' a section of your model in bambu studio and tell it not to generate fuzzy skin for this section. Great video!
@PatrickHoodDaniel Місяць тому
Very well made video and the fuzz looks great! For those that are looking to hide layer lines (from Title of the video) you may want to revisit the resin 3D printing. There are many resins out there that have varying degrees of strengths and some eliminate warping. Another idea would be to create a silicone mold from a sanded part if you wanted a non-fuzzy surface.
@jakemgrim Місяць тому
Thank you! I really want to give resin 3D printing another shot. Have you ever made a silicone mold? I’ve also been wanting to give it a try!
@PatrickHoodDaniel Місяць тому
@@jakemgrim I have not, but watch other UKpostsrs that do. The CrafsMan SteadyCraftin is a great resource and he mentions others in the field.
@ferdbrowne2457 Місяць тому
Excellent, detailed and interesting video- from long time ultimaker and (recent) bamboo user.
@jakemgrim Місяць тому
Thank you! I was obsessed with the ultimaker when it first came out! I even made my own reprap version. How are you liking your bamboo versus your ultimaker?
@davehudson5589 Місяць тому
Great video!! Thank you! I have a part i’m trying to match and this is exactly what i was looking for!! Can’t believe i haven’t seen this before!
@jakemgrim Місяць тому
It’s comments like yours that make me love making videos! I’m glad this helped! I’d love to see pictures of what you’re working on! You can post them in our Discord (linked in the description) if you want! I hope to see you around in future videos :)
@helderlmf Місяць тому
Bro, before you say that, I would imagine how was your solution becouse I tryed the same in my pieces and its realy works. Its nice becouse you corroborates with the facts. Thanks.
@jakemgrim Місяць тому
Thanks bro! I really appreciate your feedback! I hope you stick around for future video comments :D
@Amintoymaker Місяць тому
😮 I never try fuzzy skin. This option also seen in prusa sclicer, but I skip it, now I try it, thanks 🙏 for enlighten fuzzy skin ❤😊.
@jakemgrim Місяць тому
I hope it goes well! :)
@htpkey Місяць тому
I really enjoyed this video! Very few channels show the whole journey of finding a solution to a problem. They just tell you the answer is X.
@jakemgrim Місяць тому
Thank you! A lot of people are telling me the opposite. I’m glad you enjoyed!
@htpkey Місяць тому
@@jakemgrim Many people online tend to be very impatient when it comes to the content they consume. They often want instant gratification, that's why it's common to see the statement "I watched a 10 minute video just to learn that you used the Fuzzy Skin tool, you should have said that in 1 minute". There are thousands of videos about the Fuzzy Skin tool in 3D slicers, there's nothing special about that. Most of them are using this tool for it's basic intended purpose (adding a rough texture to the print). It's rare to find people using this tool to solve a very common issue in 3d printing (hiding layer lines), like you did here. I love that you started with a specific problem that many people face in 3d printing, then through experimentation and discovery stumbled upon the Fuzzy Skin tool. After this, you also did your own experiments to find the best settings for this tool. That whole process was educational and fun to watch! The storytelling was the best part about the video.
@jakemgrim Місяць тому
@@htpkey thank you so much my friend! I really really appreciate your feedback. You made my day. Thank you for your support :)
@AndersBorgSweden Місяць тому
Thanks Jake for showcasing fuzzy skin. PrusaSlicer has it too (but fewer options?), so best case it works with any printer. I'll try it out. Have you posted a high resolution photo of your test prints somewhere? Thanks in advance.
@jakemgrim Місяць тому
It was my pleasure! I had a blast making the video! You make a good point about high resolution pictures. If you join our Discord community (liked in the description), I can post the pictures there! You can also message me through my website and I can send you pictures! Hope to see you around :)
@smartmarketers2584 Місяць тому
Loved your story and presentation! Thanks for sharing .
@jakemgrim Місяць тому
I’m glad you enjoyed it! It was my pleasure! I hope you stick around for future videos :)
@cthulpiss Місяць тому
You can add modifier in the shape of your outer walls and add fuzzy skin to those only. It would make printing quicker.
@jakemgrim Місяць тому
Great idea! Thank you!
@hypertool35 Місяць тому
Does it have to do auto calibration each time?
@Dexter101x Місяць тому
What is the printer you used?
@jakemgrim Місяць тому
Bambu Lab A1
@gardian1701 Місяць тому
Prusaslicer has had this for years also. 👌 I used it for car parcel shelf brackets in grey petg, look exactly the same as the car interior texture
@jakemgrim Місяць тому
What settings did you use? 0.3/0.3 ?
@gardian1701 Місяць тому
@@jakemgrim I can't even remember tbh, 0.1protrude, with a 0.1 layer line I think 100% infill petg. It's the only time I've used it. The grey petg happened to be an exact match to the cars interior colour, to the eye at least.
@jakemgrim Місяць тому
@@gardian1701 good to know! I might have to try something similar with my car. Thank you for your feedback! Hope to see you around in future videos!
@Plaguxux Місяць тому
I'm starting to wonder if you leveled the resin printer well, or added correct supports
@Braindeef Місяць тому
i just realised this myself recently witha a carbonfibre textured part i was printing. long story short resin printer died so had to use my filament printer, and was very surprised witht the result. Reason i mention it is i know why you had issues applying textutre to the file, its as simple as not having a dense enough mesh. If you think of the mesh/faces as pixels, the more pixles you use the higher resolution the part. I dont know now you do it in blender though, as i use c4d
@jakemgrim Місяць тому
Oh my goodness! Your feedback makes perfect sense to me! And never even considered that! Now I want to try it again. Thank you so much! I hope to see you around the comments of future videos :)
@KashikoiBaka Місяць тому
Depending on the orientation of the print in 3d resin it can lead to repeated failures when big flat surfaces are suctioned against the film. A lot of times you'll need to orient at an angle for best results. In fragility there are "abs like" that make them more viable.
@jakemgrim Місяць тому
Good to know! I will use this information when I try it again! Thank you for sharing!!
@bikepacker9850 Місяць тому
It's funny seeing you go through the same process as I did, getting quotes for injection molding the resin printers etc etc.. good luck with your endeavours.
@jakemgrim Місяць тому
Thank you!
@Dustygoodz Місяць тому
Hi there! Do you have any recommendations on a good beginners 3D printer? Ive been designing 3D renders of shoes in Gravity Sketch that id like to test out for prototypes. After watching this video you seem very knowledgable of 3D printers so I thought id ask! Haha
@lordagmar Місяць тому
One ive tried for smoothing, i saw it somewhere on youtube but you spray a layer of soray paint with a layer of polyurethane before the paint dries. A couple layers and the lines are gone. Im not 100% on wether it was the spray paint first or the polyurethanesince its been a while but it works pretty decently
@jakemgrim Місяць тому
That’s a cool idea! I should try it!
@luppchri Місяць тому
Fantastic video and super tip. Thanks for sharing.
@jakemgrim Місяць тому
It’s my pleasure! I had a blast making the video. I hope to see you around in the common section of future videos :)
@metaphysicalArtist Місяць тому
Jake! Great info, getting my Bambu A1 Mini tomorrow, will try Fuzz ... btw great Shirts (what brand is it? Carhartt fleece)
@jakemgrim Місяць тому
Thank you! I hope you love your Bambu printer as much as I love mine! You’ll have to let me know how Fuzz goes for you. If you have any questions while setting it up, you can comment it on this video or in my discord(linked in the video description) and I’ll try to help you out! And thank you, it’s a Carhartt flannel I got from my mother for Christmas! I can check the tag later to see the exact “model” it is
@user-vs2eh8db3r Місяць тому
Dude this is amazing, thank you for your help and keep making videos 😉
@jakemgrim Місяць тому
Thank you dude! Hopefully someday I can be as cool as you!
@HarveyGuitarBoy Місяць тому
Love the style! Inspiring me to have another crack at FDM printing facing parts!
@jimbooth2010 22 дні тому
Jake, great video. Like all the info on your journey to fuzzy skin. I have the x1 carbon and would like to see how to use a modifier to only put fuzzy skin on the outside, or only on one side. I have two halves, only want fuzzy skin on outside. Cheers!
@the_trap__ Місяць тому
Hi, nice video and quiet a journey I know myself. Try PLA-CF, I'm stunned by the finish every time I use it for some projects.
@jakemgrim Місяць тому
Thank you! I’ll give PLA-CF a shot! I hope to see you around for future videos :)
@3DJapan Місяць тому
There are definitely ways to make the resin not brittle. Of course different brands may have different durability, then there's flexible resins, which can be mixed with others to improve the strength.
@jakemgrim Місяць тому
Which ones would you mix together? I appreciate your feedback Friend!
@miras.6761 Місяць тому
why not pouder printing laser sslm? resin is so clean but very messy right?
@azalea_moon-kee 23 дні тому
Consider printing your cases at a 45 deg slant from vertical, using a custom CAD modeled support gantry with tiny sprues and turning off slicer created supports. First, you could get fuzzy skin on what would be the top of your housing. I use this method for custom electronics enclosures. Second, the diagonal orientation can a lot of strength to prints in a way that can't be gotten with injection molded parts, due to how molds have to be designed to release. Third, the fuzz skin turns out even better, as the layer line orientation is not laying on any of the the cardinal axes. Thanks for the fuzz combo testing. Do you have close up shots of each combo online somewhere, like Flickr? I suppose it is just easier and more useful to print a bunch of my own samples plates.
@Amethyst_KB Місяць тому
I've found it's a great way to add a stony surface texture for some gravestones I print. Depending on the stone I use different settings.
@jakemgrim Місяць тому
I’m sure it works great for that!
@Amethyst_KB Місяць тому
@@jakemgrim yep! And some print sideways, so the textured build plate is perfect. Gives the option to display them with textured or smooth face.
@jakemgrim Місяць тому
@@Amethyst_KB good to know! Thank you so much!
@Amethyst_KB Місяць тому
@@jakemgrim for sure! Yeah print setup is like it's own art entirely... You can spend so long on it even after your model is completed.
@Amethyst_KB Місяць тому
@@jakemgrim oh damn I forgot my original comment I was gonna make... You went thru all these diff methods of post processing. But have you tried making a silicone mold of your design parts? Then you only really have to do the full process once to get the mold smooth. You can then cast with resin repeatedly. Only thing is you can only have one in the mold at a time, so that might not be an option for you....
@jackblack2931 Місяць тому
Fuzzy skin is a remarkable saver in looks. All you gotta do it put the seam in the back/hide it away from the eyes and it looks phenomenal.
@jakemgrim Місяць тому
It’s a great feature! I wish I found it sooner!
@b03tz Місяць тому
Nah, random seam all the way. It won't show in your fuzzy skin!
@jakemgrim Місяць тому
@@b03tz I’ll check it out!
@Measos77 Місяць тому
There's a new seam hiding method called scarf joint.
@b03tz Місяць тому
@@Measos77 There's a new hiding scarf called; joint method seam.
@Dusty07 Місяць тому
Do you mind sharing a gallery of photos of each fuzzy skin settings you tried? Would be very helpful
@jakemgrim Місяць тому
Yes! I will be posting them in our Discord channel linked in the description soon!
@schrikeiv Місяць тому
Fuzzy skin has been available in Cura for several years now......this is not a new thing or singular to Bambu labs
@jakemgrim Місяць тому
That’s great! I’m going to try it on my Creality CR-10 next!
@lone_puppy3539 27 днів тому
Great idea using the fuzzy skin. An hour extra for printing easily trumps your 1 to several days sand/primer/paint method.
@jakemgrim 25 днів тому
Thank you! I hope this helps!
@jasonloh6792 Місяць тому
Hi man, resin 3D printing can do it but you need the right resin… for the right job. They even use it to make moulds for small scale batches of injection moulding.
@jakemgrim Місяць тому
Thank you for the info! What resin do you recommend I use?
@marcus.guitarist Місяць тому
Great info, subscribed, thanks!
@jakemgrim Місяць тому
My pleasure! I look forward to seeing you around!
@brinder.dhanoa 11 днів тому
Everyday in FDM you learn something new. Than you for the video.
@theshazman Місяць тому
Today i learned! Thanks for the awesome video
@jakemgrim Місяць тому
My pleasure! That’s why I love making videos! Hope to see you around in future videos!
@emmanuelvelasco2665 Місяць тому
You can additionally save on printing times by increasing the layer height
@jakemgrim Місяць тому
Good idea! Thank you :)
@lamarchedutemps7427 Місяць тому
Great Tip !!! Is there a smother Fuzzy skin , less grainy ? Thanks !
@jakemgrim Місяць тому
You could try settings 0.1 and 0.1. That would be less fuzzy
@lamarchedutemps7427 Місяць тому
You show it on your vid, did not paid attention, .1 is perfect. Tks
@jakemgrim Місяць тому
@@lamarchedutemps7427 your welcome!!
@famehighprime8674 27 днів тому
Thank you ❤
@jakemgrim 25 днів тому
My pleasure!
@Manhunternew Місяць тому
Why do you use blender instead of fusion 360? I am at the beginning and I started with fusion, but I am unsure if I should switch to blender
@jakemgrim Місяць тому
I hardly ever use blender. I love using fusion 360, especially for making objects that you want to make in real life. The reason I experimented with Blender is that fusion 360 gets really slow with parts that I have a lot of faces (little triangles). Blender can handle more complex through the files that are oddly shaped. Not sure if this explanation makes sense, just know you’re on the right track using fusion 360 :) If you have any questions feel silly to ask on here, go ahead and post them in our discord community linked in the description!
@bakunfase8672 19 днів тому
It would be great if they could implement this similar to the way they've implemented paint into Bambu Studio.
@shandor2522 Місяць тому
Maybe the key to making the fuzzy texture faster, would be to have a piezoelectric actuator right at the nozzle tip, moving it sideways in completely variable increments independent of the regular nozzle travel. Imagine some subtle up & down motion too, which might have good effects as well. Elsewhere I’ve just said that natural textures would be nice besides fuzziness.
@glenfoxh Місяць тому
A fast way to make things smooth, or faster then sanding and painting a part 20 times, is just to use a soldering iron with a flat or round tip. something you would have to DIY yourself. Using that, you can melt the surface of the print smooth. And it's faster than you might think. You can polish it after to help make it look real nice. But you must have a steady hand, or you can damage the surface details, faster than just smoothing things out. And you may need to try it a few times on a test part, to get it right. After that, you're good to go, print after print.
@jakemgrim Місяць тому
That’s a cool idea! Thank you for the advice! I hope to see you around after future video with more good feedback!
@glenfoxh Місяць тому
@@jakemgrimI can't take credit for this idea. I seen it in a few videos by others, years ago. Sadly, few other 3D printer users are sharing this idea with each-other. ukposts.info/have/v-deo/gpd1lYx9eZmaqn0.html ukposts.info/have/v-deo/ppeke3dnjbBzuXU.html But, of late, if you do a search for "using a soldering iron to smooth plastic" in a UKposts search, you will get a lot of DIY ideas for fixing all kinds of plastic things, that seem to be quite fantastic. And would also work well on 3D prints. Have fun with that. ^.^
@terrylyn Місяць тому
Fuzzy skin feature is the very reason I dusted off my old 3d printer and started printing with it again. I already bought a resin printer because I wanted to get rid of the layer lines, but nothing can beat the durability of FDM parts.
@alejandrodiaz848 Місяць тому
For the impatient and ignorant people , 5:10 The point of the video is to explain his process and failures to save you time if youre new.
@jakemgrim Місяць тому
LOL thank you my friend! Hope to see you around in future videos :)
@therealchemfreak 16 годин тому
Awesome! Thanks 🙏🏻
@AgentWest Місяць тому
Neat trick, did not know slicers could do that. I remember modelling surfaces like that by hand and that was a nightmare! That said, if you do decide you want to try injection moulding, there are plenty of table-top moulding machines and I can CNC some moulds for you for way less than those $10K-a-piece people.
@jakemgrim Місяць тому
I might actually take you up on that! Would you mind sending me a message through my website www.jakegrim.com/contact that way I can contact you for CNC work?
@AgentWest Місяць тому
@@jakemgrim Sure thing
ExileShow
Переглядів 4,8 млн
Жекич Дубровский
Переглядів 2,4 млн
ExileShow
Переглядів 2,7 млн
3D Printer Academy
Переглядів 191 тис.
Fun With Screen
Переглядів 68 млн
ASMR Detected
Переглядів 82 тис.
PRO Hi-Tech
Переглядів 117 тис.