New Products 7/28/21 w/ Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier

New Products 7/28/21 w/ Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier - STEMMA QT /Qwiic!

2 роки тому

Clear Turbine Water Flow Sensor with 3-pin JST (0:10)
www.adafruit.com/product/5066...
Left & Right Mecanum Wheel Pair - 48mm Diameter - TT Motor or Cross
Axle (2-pack) (2:14) www.adafruit.com/product/4990...
Seeeduino XIAO Expansion Board - Works With Adafruit QT Py (3:25)
www.adafruit.com/product/5033...
Etched Glow-Through Keycap - Zener ESP Square Design - MX Compatible
Switches (5:53) www.adafruit.com/product/5106...
Etched Glow-Through Keycap - Zener ESP Waves Design - MX Compatible
Switches (5:53) www.adafruit.com/product/5104...
Etched Glow-Through Keycap - Zener ESP Star Design - MX Compatible
Switches (5:53) www.adafruit.com/product/5105...
Etched Glow-Through Keycap - Zener ESP Plus Design - MX Compatible
Switches (5:53) www.adafruit.com/product/5107...
Etched Glow-Through Keycap - Zener ESP Circle Design - MX Compatible
Switches (5:53) www.adafruit.com/product/5108...
Adafruit MacroPad RP2040 Enclosure + Hardware Add-on Pack (8:39)
www.adafruit.com/product/5103...
Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier - STEMMA QT /
Qwiic (10:25) www.adafruit.com/product/5165...
--------------------------------------
Shop for all of the newest Adafruit products: adafru.it/new
Visit the Adafruit shop online - www.adafruit.com
Adafruit on Instagram: / adafruit
LIVE CHAT IS HERE! adafru.it/discord
Subscribe to Adafruit on UKposts: adafru.it/subscribe
New tutorials on the Adafruit Learning System: learn.adafruit.com/
-----------------------------------------

КОМЕНТАРІ: 18

@RodrigoArgumedo 2 роки тому

Those keycaps reminds of PlayStation controller buttons and they are handy!

@aalhard 2 роки тому

I LOVE the plate for the pad. When I saw it in my Adabox I was stoked!!

@serta5727 2 роки тому

Adafruit rocks 😃 these wheels are awesome!!!

@rastikw 2 роки тому

If you use resistor values from the latest version of MCP9601 datasheet, the open/short detection works just fine.

@DavidLindes 2 роки тому

0:23 - FWIW, I'd love it if y'all would carry one of these that is food safe sometime. I've dreamt of having one for filling various vessels with a known quantity of water (e.g. a water bottle of known size, or a pint glass, etc.)

@user-em1wu3el7m 2 роки тому

I agree athough it may be ok to use with hydroponic plants....... That doesn't mean it's safe to use with plants you plan on eating etc. Nice for plants flowers if you don't plan on eating them though. Def would be nice to see a food/drinkable water safe model for sale on the site in the future. 100%

@cabe_bedlam 2 роки тому

Have you considered using scales instead?

@DavidLindes 2 роки тому

@@cabe_bedlam yes. And I’m mostly open to that. But there are also other reasons why a food-safe flow meter would be cool. :)

@figueroalabs 2 роки тому

It's the time it takes H to change spin. That time is used to listen to the record and to decode the bits. I've done a bit of decoding the aureus discus.

@ChrisLeeW00 2 роки тому

It's a very interesting way to showcase what we have learned as a species.

@sammosel3300 2 роки тому

It's so on-brand for humans, unsolicited nudes, a map showing how to get to our house, and a mixtape.

@davidharms3562 2 роки тому

Hold on now, you have 2 new RTC’s available in the Stemma QT form factor. That’s awesome! 👍🏻

@rpavlik1 2 роки тому

Was hoping the Adabox would come with the Adafruit key cap, but fortunately I need to order another Mag Tag so I'll throw it in the order 😁 Seeing the voyager golden record engraving, actually in ENIG gold, is super cool. I assembled that side facing out for now 👍 I like seeing mecanum wheels, I have mostly fond memories of working on an omnidirectional robot kit from Robot Shop years ago in grad school that had an Arduino clone, gear motors with encoders on L298 drivers, and a big old NiMH battery. It was cool, but I can't imagine how much easier it would be with modern micros. I probably wouldn't even have to try very hard to optimize the driving, instead of doing impressive feats of timer interrupt optimization etc to handle 4 gear motor encoders on a 328 😁. Definitely want to build another for myself one day, would be great if the kit equivalent was less than $400, and it looks like that will be possible.

@davidharms3562 2 роки тому

Highlight of the week! 👍🏻

@wolfrobots118 2 роки тому

I have been waiting for something like this for my co2 laser.....awesime-!

@SoulfulSolid6 2 роки тому

Question, for the adafruit soundboard how would I code the ecto1 siren with wind up, looping siren on first press, and wind down on the second button press?

@ChrisLeeW00 2 роки тому

The MacroPad has immediately become a daily use device for me. It's so quick to change the macros, so I have been using it at work for "automating" things I end up typing over and over. I changed the code a little so that the click is not a function, but toggles between allowing the rotary position to switch pages or to send page up/page down on rotary turning. My next step is to alter it so that macro pages can also accept mouse inputs.