YAY!! Welcome back, Alex!! You've been missed!! Hope you're doing well!! We need more "better than factory!" work!!

Everyone's so brave with a soldering iron until traces get ripped and components fly to the 9th dimension 😅

Awesome repair Alex. Hope the leg is healing well! For the guys out there watching and wanting to try this repair yourself that is a good thing, but stop just a minute. This takes a lot of skill and you need to practice first. Don't just try this on your $1000 board with all your data on it. Alex sells practice boards and you can find some about anywhere. You can most likely take an old DVD player or something out of the closet or junk drawer and practice removing that connector first. If it does not go well then try another and another and another. If it still doesn't go well send your expensive board to the master before trying it!

Been watching a few of your episodes and learned more than many other board level repair techs in a very short period of time. Network engineering doesn't get anywhere close to this level of detail, so you make my job seem like a cake walk in comparison. Hats off to you sir.

Welcome back Alex,!! Hope you are now well recovered from the unfortunate injury. Happy to see you are fixing back the "problems" in queue waiting for you to be back.. :)

Amazingly detailed work.

14:50 I had to close my eyes due to all that UV light exposure. 😂🤣😂 Nice to see you back again.

Glad to see you back Alex, hope that wound is getting better. Greetings from Spain

First, I hope your leg is healing well. Second, glad to see you back in the saddle.

hi alex hope your injuries have healed now better than factory i hope....great video as always ....glad your back ..

Welcome back Alex, amazing job, as usually. Happy to see you back!

Always the best one Alex! A lot of patience, a lot of hard work but hard work and professionality always pays! Keep doing like this, by the point of view of an hobbyist you're such inspirational

It is great to see you in good spirits! I hope all is getting well over there for you! 😃

i used to struggle until i started watching your content and i can attest to the beauty of low melt solder

It's good to see you again Alex! Miss you so much 🙏❤️

Alex, great channel, love the videos. 👍 I've started working with SMD and quickly realized that you really weren't kidding about those components flying into the 9th dimension! I had a good laugh the 1st time it happened when I heard your voice in my head telling me exactly where that component has gone. 😆

Welcome back hope that you have healed 100% so you can kick us all to learn from your wonderful lessons. Thanks for showing the size of the penny and SMC.

Welcome back Alex nice to see you on the mend.

Glad to see your doing better Alex! Excellent video, I think I'll stick with ps2 related work for the while. This is insanely small. Keep up the excellent work!

You have the patience of a saint. Theses folks are really making a mess of thing big tme. Seeing just how small some components are is astonishing.

nice to see you back alex,hope your leg is doing fine, God Bless you and your family

Great to see you back with a new video, I missed you. I hope your leg is healing up and that you're doing well! Take care!

Great job Alex! Hope the leg is better! Super surprised you don’t mail these back to the customers as no fix. It’s impossible to tell everything he/she screwed up.

Nothing better to start the morning with coffe and video from you! You did an Amazing job. And i hope your leg is getting better :)

Always great watching a master doing his thing.

Thank you for your videos. I'm learning motherboard repairs on my own, and your videos are a big help for me. Thank you

Beautiful, I've been using the low melt solder since you mentioned it in your videos, it's a game changer, thanks.

Good to see you back, im always happy to see people try to repair their electronics. Hopefully he learned from his mistakes and guided by this video, fingers crossed next time make attemts a repair it is successful

Hope your leg is healing okay, Alex! Was happy to see your face pop up on my feed again. ❤

Glad you are back, Alex. Hope the leg ls better and not in pain.

Welcome Back Alex ! I missed your regular insightful videos.....

So satisfying to watch hard work and skills is beyond compare.

God Bless You and your family Alex 😊 I always enjoy watching your videos Alex, you are not afraid of showing what a real expert professional repair man does on the daily😊 Again God Bless You brother😁

Glad to see you back brother!

Welcome back brother nice to see u again missed ur videos

Great to watch, I envy your patience

amazing job as always ❤

The guy who sent that board in didn't do you any favors for sure. Great video, looking forward to more

I'm glad you're back and doing okay, sir. I'm surprised you even bothered working on this board. Is this the kinder gentler Alex I'm seeing? Great job as always. Better than factory.

Good to have you back in video, glad you are okay Alex? Great video, better than factory 😊

Good to see your return Alex hope your leg has healed properly.

Good to see you back Alex.

Welcome back, Alex!

Love your videos Alex. You may it look way too easy. Cant wait to get my hands dirty, trying this out!!

Alex just WOW….. great work

Perfect job as usual customers make a mess just for mr northridgefix to correct all the damage what an awesome guy Alex realy is helping peoples mistakes ❤

You make everything look so easy. It would take some for hours.. as usual your videos are the best. Say hello to big boss and your nephews..

Hope your leg is better . Nice to have you back . We miss that victory smile when you beat the circuit board into submissions. A quote from Uncle joey diaz

Deginately above & beyond expectations ❣

Nice video. Hope your leg is healing up nicely now. ✌️be with you

Good to see you Alex 🙂

Welcome back Alex. I hope you feel better. That's the most important. I think my pots on my variable power supply are going South. It is increasingly frustrating to dial in the voltage. Has anyone encounter this?

Welcome back I hope your getting better

WB. And wow... It looks like the customer just covered the board in flux.

Glad you're back! How's health? Keep up the good work!

Alex, as good as you are with electronic fixes, I can tell you are a wonderful human being and family man! Heal up quickly, we need you in tip top shape.

Welcome back .... Hope You are better.

Alex, unfortunately with you making it look so easy it means people are going to attempt to do these things themselves. On the bright side, it means more work for you ;)

Time consumeing patch process very procise neat steady soldering work 💯

Great family Alex!

Always doing magic ❤ from 🇿🇲

I love watching you fix the tech. I wish we had one of you in England lol.

Good to see you my friend. Hope your leg healed up okay.

Incredible Micro soldering technics 1000/10

Good job mate 👍

You are so accurate with the knife, like a robot, then your nephews came in and it reminded me you are a human 😂😂 I remember as a kid going to my uncles and messing around with audio stuff and wiring with my uncle, good memories man 😂😂😂 Its remembered by us youngers 😊

Lucky kids to have this Uncle!!!

Hello sir , I’m so happy to see you back , I’ve been in the same pain ! Life goes on ,, I think for pin need to say ooh La La, Ooh La La, Ooh La La

great to see u again Alex. u are clever man and understand bad things hapens. but you are stronger,clever and better so no reason to focus on bad things. and beside ur channel wich u repairs electronics i see also u giving wisdoms and trying to make better world. tnx u

I am decent at soldering but when I see broken pads, I am sending to Northridge Fix!

17:36 "mother calls , do not anwser, wife calls , do not anwser ... Robber comes in ...let them take whatever they want..... just keep holding" -- That worth a subscription

Amazing Fix 💪

Welcome back eng ❤

Great work, I wish you success in your work, your brother Ahmed from Iraq

Hope your feeling better!

aww seeing that board, i can imagine being the person who ripped off pads during multiple attempts and tore a full trace off the board like a loose thread :< so nice of you to notice and choose to replace the unreported missing components so it's at least got a chance of working when they put it back together

Wonderful job love your videos this is my hobby for years now. Out of curiosity would you ship outside the USA. I'm from UK

Your equipment is the best

Its been so long been waiting for the amazing vidios

Hello, you are an artist and you are good at what you do. Otherwise you are an optimist. From what I've heard and seen in other videos, a brand name repair service would probably simply send this nightmare circuit board back - with the disclaimer - no longer repairable. Instead, you use your skills like a motivated rescue worker in an accident on the highway and do your work with care and motivation to achieve the best possible result. Apart from the price, every customer can be happy with such a high-quality repair these days. Thank you for letting us watch and sharing your techniques and experiences with us. So when you receive a PCB that is in such bad condition, do you never call the customer? Presumably you document your work in the repair video and send the customer the invoice with the repaired board? Very nice to see that you are satisfied with your work. Thanks

Oh my I am totally amazed I repair electronics but dont need a microscope to see them!!!! Keep them coming!!!

how can you mess up this badly.... holy shit, that repair was legend, i wonder how much you charged that was such a mess !

Excellent. Art. 👏

Very nice work with those wires

always love wathcing these!! no idea what the hell is going on but its oddly satifying just watching you repair peoples f-ups

customer took the phrase "flux is your friend" way too seriously on that one.

With the condition of the board and the HDMI ports, I give this about a 5% chance he actually paid for this repair without being take to court.

Great job

The skills of a surgen😮

This is what happen when peoples think they can repair anything by watching UKposts video but they don't have the skills and the right tools !! Good Work

Glad you are back Alex! Take care of the leg. What ever happened with the offer on the house?

Wife called to say she was leaving me, but I kept holding.

Awesome ✌🏻✌🏻✌🏻 After so long✌🏻✌🏻✌🏻 Get well soon ✌🏻✌🏻✌🏻

get well soon and much love from Pakistan

Good to see you. How is you leg now?

I have repaired a lot of boards but that one takes the cake.

Nice work

Excellent

Hi Alex, your Video's are awesome, u have a beautiful family [Nephew's] stay strong my friend.

how is the shin, is it shining,nice to see you bacl, where is the fuse on a ssd motherboard please