Переглядів 114,533
Model: H180
Max. gas flow rate: 95 Liter/Hour
Flame temperature: 2800℃
Cell volume: 1800 ml
Electrolytic cells: 1
Voltage: AC220V 1.5A
Water consumption: 30 mL/Hour
Solution density: 15%
Pressure range: 1.3 - 1.5 bar
Weight: 9 Kg
Flame torch supplied: 1
Torch tip supplied: 2
Size: 480 x 280 x 360mm
There is no flashback arrestor on the hose, the flame most of the time stops at the tip (the bubbler is a flashback arrestor).
Potassium Hydroxide (KOH) is sold separately
KOH dissolves very quickly in water and theoretically it remains in the electrolysis cell, it is not eliminated with the HHO gas, just add more distilled water when needed.
HHO = Oxy-Hydrogen, highly flammable gas, it does not require air to burn, it already contains both the fuel (H) and the oxidant (O).
The device automatically stops when the pressure reaches around 1.5 bar (1.52 kgf/cm2) and it automatically starts when the pressure drops below around 0.7 bar.
The flame goes out if the valve is opened too much (too high pressure).
The flame is mostly invisible but at max flame size it can burn a paper even from a distance of around 10cm (3.9 inch).
Wear dark eye protection against metal sparks and blinding light!
www.ebay.com/sch/i.html?_from...