Place the Spark Plug into the Electric Soldering Iron and Admire the Results

7 місяців тому

Hello everyone! You are watching video "Place the Spark Plug into the Electric Soldering Iron and Admire the Results"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creationholic
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup

КОМЕНТАРІ: 233

@nigelwhitehorn5423 10 днів тому

Well that’s 6 minutes of my life I won’t get back!

@speedfreak8200 8 днів тому

Me too, Sparkman

@creationholic101 6 днів тому

I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

@stevehaynes2857 Місяць тому

Wow! He turned a soldering iron into…… well, a soldering iron!

@samspade4050 29 днів тому

If you didn’t grasp the concept of what he did then please do everyone a favour and stay far far away from tools before you hurt someone

@MikeNel33and49 27 днів тому

Soldering iron companies are discouraging electronics in USA.I learned professional soldering on gov projects using alloy tips and good solder no pitting on tips and little crud copper tips disinaagrate, and look at the suppliers they're making money with junk!!!Names like Unger were good and antex

@GettingNervous 12 днів тому

@@samspade4050 What he did is stupid. He should learn how to solder properly instead of showing such ridiculous nonsense.

@clarencegreen3071 10 днів тому

@@GettingNervous To look at this in a slightly different light, he has 387k views in 6 months. That' will bring in some of that sweet youtube money!

@GettingNervous 10 днів тому

@@clarencegreen3071 And 3,120 likes prove that there are at least 3,120 stupid people.

@thorin693 Місяць тому

Turn the iron on and tighten the tip. Smooth ceramic will not sharpen anything.

@djvivian-acidpro Місяць тому

589K subs....much better than 2...

@creationholic101 Місяць тому

Thank you for watching

@speedfreak8200 8 днів тому

No, but rough ceramic sure will.

@user-rc5rw6zf7n 6 місяців тому

Hello my teacher... I am from Iran. I am proud of you.. I really enjoy it. good luck❤❤❤❤

@creationholic101 6 місяців тому

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

@user-jq3gr6yj2c 6 місяців тому

سلام پویا جان . هموطن گلم صادقانه دوستون دارم

@twinwankel 7 місяців тому

I guess I don't see the point of spending that much effort to remove the center electrode to hack a soldering tip when you can make one with something like copper wires.

@creationholic101 7 місяців тому

I used this part of spark plug because it has high thermal conductivity.

@user-kf7bc6jg3u 7 місяців тому

スパークフラグと半田ごてを合体させるなんて普通の人には考え付かないと思いますよあなたは素敵なクレージーです

@viorelpopescu4990 4 місяці тому

Treba Pachistan ha, ha, ha

@SoliHome86 7 місяців тому

Good Idea. I love to see how you do

@alejandrosakaripa8389 4 місяці тому

Gracias por las ideas creativas y solucionador as de problemas de trabajos te felicito.de Venezuela

@creationholic101 4 місяці тому

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

@gilwillette4543 6 місяців тому

From New Hampshire USA

@creationholic101 5 місяців тому

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@carlosarmas4287 Місяць тому

Con el tercer episodio has puesto en peligro tus dedos Gracias Te veo desde Zaragoza - España

@creationholic101 Місяць тому

Hello! thanks for your comment. Wish you all the best!

@carlosreys9 6 місяців тому

Boas ideias Obrigado por compartilhar.

@creationholic101 6 місяців тому

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

@user-tv6vn4kd8j 7 місяців тому

افكار مفيده) احتاج الى عمل محول كهرباء صقير لتحويل لمبه منزلية إلى ١٢ فولت ليعمل مع بطارية السيارة ) أعجبتني أفكارك

@creationholic101 6 місяців тому

Welcome to Creation Holic channel! Thank you so much for your support

@aydnaydn2558 Місяць тому

Güzel iş güzel emek teşekkürler,🇹🇷

@creationholic101 Місяць тому

Thank you! Cheers!

@arceniozambrano 6 місяців тому

Servirá también para afinar tijeras ✂️ de barbería.?

@nimalsandunsiri4024 6 місяців тому

That's a good idea Jaya. I am from Sri Lanka. Like to make use of a lot of things that are thrown away.Thanks🙏❤️🤝

@creationholic101 5 місяців тому

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

@alaaaboahmed4563 Місяць тому

الله ينور عليك يا هندسه ربنا يكرمك ويوفقك ويرزقك ويسعدك يارب العالمين

@creationholic101 Місяць тому

Thank you! Cheers!

@user-bl6vn8wp9n 19 днів тому

This explains the term "full circle". From a perfectly able soldering iron to waddaya know a working soldering iron, by simply changing the tip.

@creationholic101 14 днів тому

Thank you! Cheers!

@sarjitnijhar5337 2 місяці тому

❤Thanks for such ideas. Good it improves me.Fr Malaysia ❤❤❤❤

@creationholic101 2 місяці тому

You're welcome 😊

@ivohpineda 4 місяці тому

thanks a lot for your tips, from Mexico

@creationholic101 4 місяці тому

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

@markludington887 9 днів тому

Buy a TS101 Soldering Pen with adjustable soldering temp. Heats to useful temp in about 10 seconds.

@cleitonakaspyda 5 годин тому

do u think this is a video for someone that can buy anything....it's like saying be smart to a dumb person....

@jarbas3022 2 місяці тому

Brasil Achei muito bacana!!!!!!!!!!!!!!!!!!!

@creationholic101 Місяць тому

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

@leonwatts1420 12 днів тому

I would have just buy a new tip or clean the old one 😂😂

@creationholic101 8 днів тому

Hello! thanks for your comment. Wish you all the best!

@KefrenElectronica 4 місяці тому

Si se necesita mas temperatura hay 2 caminos: 1: introducir a tope la punta original/o normal. 2: utilizar un soldador mas potente. La seguridad y confiabilidad ante todo(durabilidad de herramientas y materiales)😉

@brazisouf Місяць тому

شكرا على المجهود.. من الجزائر

@creationholic101 Місяць тому

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@arceniozambrano 6 місяців тому

Estupenda idea, tengo problemas con mí soldador, lo pondré en práctica.

@creationholic101 6 місяців тому

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

@AscanioBorsato666 5 місяців тому

Wonderful. Im from Italy

@creationholic101 5 місяців тому

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@kamelkamel5207 Місяць тому

جيد...تحياتي من تونس......جربت الفكرة ممتازة

@creationholic101 28 днів тому

Thank you! Cheers!

@Thawee-sj3pr 5 місяців тому

สุดเจ๋งจริงๆครับ 👍

@creationholic101 5 місяців тому

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

@SICARIO76 3 дні тому

Hello from Greece 😎😎😎😎😎😎

@adriantoobe9782 7 місяців тому

Estoy enamorado de este canal 😍

@creationholic101 6 місяців тому

Welcome to Creation Holic channel! Thank you so much for your support

@user-lk7oy6pk9e 7 місяців тому

Garanhuns Pernambuco

@user-jq3gr6yj2c 6 місяців тому

Good job my best friend . U r amazing coach . But plz be careful dont hurt urself . I love you ❤

@creationholic101 5 місяців тому

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

@koshaz3x Місяць тому

For the soldering iron, I recommend to you, to use flux, there should be no problem of cold soldering with it.

@creationholic101 Місяць тому

Hello! thanks for your comment. Wish you all the best!

@speedfreak8200 8 днів тому

I've been fluxed up since junior high.... if you remember the 70's you weren't there 😂

@herbertvanrensburg6411 Місяць тому

I always used an old ceramic saucer for sharpening scissors, your idea looks more efficient, thank you. Never cut toward yourself when using a knife, it could lead to some serious lacerations, an easier method of cutting notches would be to use a bench grinder, an angle grinder, or even a file. Instead of trying to tie a knot into your cotton, simply wind it stiffly around the wood and then apply some super glue whilst still holding the end of the cotton in your free hand, once the glue has been set, cut the loose strand off.

@creationholic101 28 днів тому

Hello! thanks for your comment. Wish you all the best!

@MetinTetiker 4 місяці тому

Sayın Arkadaşım.İyi niyetli,güzel çalışmalarınız ilgiyle izleniyor muhakkak.Ben sadece bu paylaşımda buji ile cam kesme doğru bir uygulama değil.İster çok yeni,isterse çok kullanılmış elmas olsun cam yüzeyinde tek çizgide görev yapmalıdır.Cam üzerinde git gel olmaz diye düşüncemi paylaşıyorum.

@creationholic101 4 місяці тому

Hello! thanks for your comment. Wish you all the best!

@jackhackett6827 Місяць тому

ALWAYS KEEP YOUR HANDS BEHIND THE BLADE !

@creationholic101 28 днів тому

Hello! thanks for your comment. Wish you all the best!

@jacka492 5 місяців тому

Bravo très astucieux 👍👍👍👍de FRANCE

@creationholic101 5 місяців тому

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@robertpotvin8872 19 днів тому

for the scisors,cut a piece of sandpaper instead,lol

@tipsunknow 7 місяців тому

hello! how are you?

@creationholic101 6 місяців тому

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@CarlWinter-oy8uf Місяць тому

What type of steel /metal-- has he extracted from that spark plug ?---is it copper or high carbon steel --he is using as a replacement soldering tip on the iron ?

@creationholic101 Місяць тому

Platinum, Nickel and Iridium alloys.

@bertrandanctil6897 8 днів тому

Bonne idée! Merci.

@creationholic101 5 днів тому

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@user-qb9tb9zx5h Місяць тому

I am from Brasil sp state

@creationholic101 Місяць тому

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@Mrinventor93 5 місяців тому

Ideas inteligentes, Buen trabajo bro gracias por compartirlo

@creationholic101 5 місяців тому

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

@andybutler2291 18 днів тому

I was waiting for him to use the shards of ceramic insulator in DIY dentistry ...

@creationholic101 12 днів тому

Thank you for watching

@Mr.ky89 4 місяці тому

Bugi rất tuyệt vời nếu biết cách tái sửa dụng

@creationholic101 4 місяці тому

exactly

@pdanayal Місяць тому

Nice idea.

@creationholic101 Місяць тому

Thank you! Cheers!

@dangermouse2235 2 дні тому

Just when I thought Id seen it all...

@user-hx5zw2qi9l 6 місяців тому

very good , thank u much.

@creationholic101 6 місяців тому

So nice of you

@AmazingSmart-ngth 7 місяців тому

Thank you for all these great tips. Keep these ideas coming. Great video.

@CarlWinter-oy8uf Місяць тому

Wow--maybe that Platinum Nickel and Indium SPARK PLUG --tip will help improve this really lousy soldering iron tip I have that refuses to tin & solder properly --a real nuisance--I need to solder without any drama ---thankyou for the idea --I will definitely try it !

@creationholic101 28 днів тому

Thank you! Cheers!

@skeltane 10 днів тому

This is a joke, right? Well, there goes six minutes of my life I won't get back.

@creationholic101 20 годин тому

I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

@user-dani54 Місяць тому

سلام بسیار عالی 🎉

@creationholic101 Місяць тому

Thank you! Cheers!

@aros007z 7 місяців тому

Awesomeness

@creationholic101 6 місяців тому

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

@bekirozcelik139 6 місяців тому

teşekkürler

@creationholic101 6 місяців тому

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

@robertpotvin8872 19 днів тому

the heating element will not last ,not anof surface for the eat to transfer to the tip,,,,

@jamesmaybury7452 22 дні тому

I’ve learned that you can’t cut spark plugs with scissors, you need an angle grinder.

@creationholic101 20 днів тому

Thank you! Cheers!

@alihaghani67 6 місяців тому

آفرین . ممنون . من مدتهاست با لحیم کاری مشکل دارم . امیدوارم که جواب بده . اون وقت بار ها و بارها دالتون میکنم . علی از ایران اصفهان 🙏🙏❤

@creationholic101 6 місяців тому

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@MikeGervasi Місяць тому

Wait till someone tries that with tempered glass.

@creationholic101 Місяць тому

Thank you for watching

@thanapatrachartburut513 4 місяці тому

ปลายหัวไนท์เขาก็มีขายอันละ 17 บาทเองนะครับ

@creationholic101 4 місяці тому

Thanks so much for watching our video. Wish you all the best

@creationholic101 4 місяці тому

Thanks so much for watching our video. Wish you all the best

@Aldd960 Місяць тому

Basim Alharbi from Baghdad

@speedfreak8200 8 днів тому

Brought to you by the Clicky Baity Channel 😂

@johngayder9249 29 днів тому

A word to the wise: never smash spark plug porcelain near a vehicle. Porcelain and safety glass do not mix!

@creationholic101 27 днів тому

Hello! thanks for your comment. Wish you all the best!

@Rais926 2 місяці тому

Wow amazing

@creationholic101 2 місяці тому

Thank you! Cheers!

@bmwn1954 Місяць тому

ممنون ازت ،خیلی طولانی میکنی ویدئو رو

@creationholic101 Місяць тому

Thank you! Cheers!

@joseleonardoleonardo9826 6 місяців тому

Eu sou do Brasil

@creationholic101 6 місяців тому

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@peachsncream5808 7 місяців тому

4:02 lol , why not cut down the pop rivet as it was and use that rather than wasting all that time with the spark plug 🤦🏻‍♀️ that’s what I have been doing for years , and it so just fine . If you want too be really fussy - you could use stainless steel poprivits 🤷 .

@creationholic101 7 місяців тому

I used this part of spark plug because it has high thermal conductivity.

@peachsncream5808 7 місяців тому

@@creationholic101 I understand that is true - however I believe the overall result was more likely a coincidence , considering how thin the spark plug tip was , by the time you had Finished the modification - I think a side bye side test would show - That the same result would have come from using the cut dawn poprivit . 🤔

@waltermanrique2271 17 днів тому

soy de mauritania

@creationholic101 12 днів тому

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@taperebabeleidodo859 6 місяців тому

❤❤❤❤❤❤

@creationholic101 6 місяців тому

Welcome to Creation Holic channel! Thank you so much for your support

@robertpotvin8872 19 днів тому

take a piece of that ceramic ,throw it at a door car window,,watch what will hapene,,n,b,better do this on a scrap one,🤣

@salomonhernandez3289 Місяць тому

No entiendo para que malgastar el disco? Solo con romper la losa salía el electrodo?!!?😮😮

@creationholic101 Місяць тому

Hello! thanks for your comment. Wish you all the best!

@georgeh9967 Місяць тому

just use a soldering tip, they are cheap. and put solder on it next time. what a stupid waste of time.

@creationholic101 Місяць тому

Hello! thanks for your comment. Wish you all the best!

@tac_kane 6 місяців тому

I expected how to renew old spark plug...

@creationholic101 6 місяців тому

Thank you for your feedback. I will think about a solution to this problem

@hafdallahabdelhafid6752 7 місяців тому

🇩🇿

@user-yu5dj7gu9m 5 місяців тому

السلام عليكم انا منالعراق

@creationholic101 5 місяців тому

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@gregoryhouck5738 25 днів тому

Your soldering trick didn't work because of the changes you made to the iron but rather because you acctually tried to solder it correctly after the changes.

@creationholic101 21 день тому

Hello! thanks for your comment. Wish you all the best!

@juanbiope Місяць тому

ojo el cautil esta con la punta mal ajustada

@creationholic101 Місяць тому

Hello! thanks for your comment. Wish you all the best!

@philipbrougham6360 5 днів тому

Have l missed something here ?

@rong4189 Місяць тому

Why is the grinder spinning so slowly?

@creationholic101 27 днів тому

due to the recording speed of the camera

@rong4189 27 днів тому

@@creationholic101 oh of course!

@peachsncream5808 7 місяців тому

1:14 unless I see the scissors in the same frame = with out the unnecessary offscreen Segway to the plastic bag . I’m calling bullshit on this one The ceramic of the spark plug is not only rounded But also has a tuff glazed surface that is unlikely to be capable of sharpening anything as is . I am going to try this tomorrow . If I’m wrong I’ll be back to apologise . If I’m Wright ….I will be back tomorrow too confirm my suspicions. Crazy Ozzie OUT 👣. I WAS / AM WRONG IT WORKED 🤦🏻‍♀️ my apologies for my negative comment .🙏

@creationholic101 7 місяців тому

I had done it and it has real sharpening effect. I would love to hear your feedback after you try it out.

@peachsncream5808 7 місяців тому

@@creationholic101 will do 👍

@peachsncream5808 7 місяців тому

It works 🎉

@superlio100 22 дні тому

lo de la soldadura es tonteria lo que a hecho que se suelde es porque puso estaño en la punta en hacer contacto con el otro estaño que no se ablandaba antes. Hace que se ablanda igualmente en hacer contacto con el estaño fundido y no la punta del soldador

@curdor6758 4 місяці тому

Pourquoi ne pas réduire l’épaisseur du bec du fer à souder avec une meule. Au lieu de casser un bougie et retirer la barrette

@creationholic101 4 місяці тому

The spark plug tip conducts heat quite well

@armeniosilva8739 23 дні тому

O UKposts deveria proibir certos videos

@Bilaljan8970 2 місяці тому

good

@creationholic101 2 місяці тому

Thanks

@hoagiesan 6 місяців тому

Please tell me this is serious and not intended to be humor!

@creationholic101 6 місяців тому

Yes, this is serious

@anonymously241 7 місяців тому

Jakol time 👍💯

@creationholic101 7 місяців тому

Thanks you for watching my video. Wish you all the best

@tukangngirit58 7 місяців тому

one item with three extraordinary functions 6:11

@creationholic101 6 місяців тому

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@user-zi5ud9nx7o 6 місяців тому

Türkiye van

@creationholic101 6 місяців тому

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@davebayliss2278 Місяць тому

Flippin heck....just go and buy a better soldering iron tip.....pennies !!!!!

@creationholic101 27 днів тому

Thank you! Cheers!

@ibrahimsayed8429 Місяць тому

Go to hil😅

@creationholic101 Місяць тому

Thank you for watching

@jeffbrassard1268 14 днів тому

Dullest cutoff wheel I have ever seen.

@creationholic101 10 днів тому

I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

@GettingNervous 12 днів тому

Rarely have I seen such incredible nonsense.

@creationholic101 10 днів тому

It's very good, try it and feel it

@KefrenElectronica 4 місяці тому

Es una total tontera e ignorancia Al colocar una punta mas corta se concentra la temperatura al mismo tiempo que se va quemando la resistencia por exceso de temperatura interna sin disipar ya que la punta normal hace de disipador termico

@creationholic101 4 місяці тому

Hello! thanks for your comment. Wish you all the best!

@viorelpopescu4990 4 місяці тому

Corect si cu logica

@abdellahzaidi1257 Місяць тому

لا شيئ مفيذ.

@creationholic101 Місяць тому

Thank you for watching

@user-by9qw9vp8t 3 місяці тому

نخست بدان وآگاه باش که =》خودت هستی《 پدرصلواتی هرکس فکرمیکنه همه مثل خودش یاکمی بهتر یابدتر ازخودش هستند&درقسمت۲سرشمع رو تبدیل به وسیله لحیم کاری مثلا داشتی خلاقیت بکارمی بردی وسیله لحیم کاری اول با وسیله لحیم دوم بسیارفرق داشت اولی "کهنه"و سری سیاه رنگ ؛؛اما دومی "نوع وجدید"بود وتازه از قوطی بیرون امده بود وبراز اولطن بار بودکه داشتی لحیم کاری میکردی . حتی برای یک بارم سرش به روغن لحیم هم نخوردبو .چون خودت فکرکردز چیزی نیست وکسی هم نمی فهمدمثل خودت ❤پس همه رامثل خودت حساب کردی اما گفتم همان اول که 》>》خودت هستی《

@creationholic101 3 місяці тому

Thank you for sharing your feedback

@carlosalbertosilva3703 Місяць тому

Naaa fake

@r.catton8731 Місяць тому

The original problem of the soldering iron was the screw was loose to begin with.

@SkunkPunch73 Місяць тому

Hahaha you realise you wrote that and everyone can see just how daft of a person you are no offence intended to you but you did write it.

@michaelkennedy2528 Місяць тому

Then he nearly burnt the other wire in half next to it.

@MikeGervasi Місяць тому

Actually the problem was the iron was cold. Also didn't tin the iron with solder like he did with the new "Tip".

@SkunkPunch73 Місяць тому

Problem is people removing your comments because they can’t take getting told they’re a bit dull!!! I wonder how long this one will stay up for before it gets removed 5 or 10 minutes. The screw does absolutely nothing apart from stop the soldering tip from falling out and has absolutely nothing to do with heat transferring from the iron to the tip! What are we actually going to do if we have a global disaster with the sort of people and knowledge that they have got in their heads!! Humanity as a species is doomed with geniuses like the original poster of this reply left to replenish our species 👉🏼🤤💨🧠

@creationholic101 Місяць тому

it's really effective you can try it

@mywayididit3295 22 дні тому

What a waste of time . Bullshit Click Bait

@creationholic101 20 днів тому

I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

@MsKinnara Місяць тому

On the 2nd one it would have been easier and quicker to just TIGHTEN the screw holding the tip in instead of making a makeshift tip from the spark-plug. YES Everyone that watched saw the soldering tip was LOOSE so it wouldn't work.

@creationholic101 Місяць тому

Hello! thanks for your comment. Wish you all the best!