thank you, I've repaired this phone like 5 times but the problem still exists and come back after some time, i'll trying the solution I have some arduino jumpers :D

galing mo talaga idol nagagawan mo pa ng paraan..

Yep same problem with my F2 Pro. I did a temporary fix cuzz I ordered a new flex cable. The thing is the cable is somewhat ok when it's cold but after you plugin the charger and the fast charging kicks in the wire in the flex cable gets so hot it doesn't work anymore, at least in my case. So I also made a jump wire but I did it without soldering it. I put a very thin like hair wire between the connectors on the main and usb board and the flex cable. The wire is very stable in place cuzz the flex cable holds it down nice and tight. It's good for a temporary fix but I still suggest to either solder it or replace the flex entirely for a permanent solution :-)

Sir if papalitan ko ng bagong flex cable gagana ba?

Wire jump is able to support fast charging / turbo charge? I'm in the problem, ordered a flex cable + sub board. But I'm afraid of issue stills not 100% fix.

Boss anong wire gamit mo ung manipis?

D2 na ky julphone'stv cp repair grabi galing

POCO f2 pro pinalitan kuna ng charging port at nilagyan kupa ng bakal sa flex ng charging port pero nawala nanaman nung na full chargerd na siya

спасибо , друг. thank you friend.

Помогло спасибо, It helped, thanks

thank you solve probs

sir pwede ba magpaayos sa inyo? paano kayo pwede makontak. ganyan unit ko yan din problema ko di marunong umayos mga technciian dito sa amin e.

Pre reply kaya pa kaya yung f2 pro ko walng response sa charging

thnk u bro very much thnks

Sir biglang nag off phone ko nong nasa plane ako ngayun ayaw na mag on at mag charge.maayus kaya to sa cable lang or reball tlga ?

bro after 15 min 13% is very slow ☹️ this phone is 33 wt

Boss san po shop nyo para madala ko din mapaayos pocofone f2 pro ko? Salamat..

Pwede po bang palitan nalang ung mainboard flex? Kahit dina i jumper?

I have exactly the same case and skin on the back 😂

san po kaya kayo naka locate pede po ba pa repair ung akin same prob na din ung akin

boss ask ko lang na tanggal yung isang parang sungay sa taas ng board ng redmi 9t ko may connect ba yun kaya ayaw masindi?. yung pinaka taas dalawa na parang sungay

Boss bakit nagloko na sa pagchcharge after mag jumper, nagcharge noong una pero nong mga sunod magcchrge ng 3% tapos hihigupin na

Boss panu pag nabasag fpc connector ng charging port from motherboard pwede paba gawaan paraan? Saka panu malaman kung saan ko i solder ung jumper wire boss? D na kase ko makapag charge eh

Hello po boss pwede po mag pagawa senyo nang poco m3 dead boot po problema sana mapansin nyo po boss need po kasi sa school para magamit po nang kapatid ko thankyou po in advance

Dah tukar main flex, n charging board, still tak boleh charge. Macam mana ???

Sir pano mag pagawa sainyo

Idol nalaglag kanina f2 pro ko pero ok naman sya kasi may case , late ko na nalaman ang naging issue nya biglang ayaw mag charge po ano kaya posibleng sira nya ? Tsaka ask ko lang po pano po gamitin ung thinner ba un para ma open po ung back cover

Master Anong pangalan ng brand ng jumper na ginamit mo

boss not charging na din poco f2 ko ngayon notification light nalng na red ang na ilaw ayaw lumabas yung charging display nya ano kaya sira nito boss?

boss mag kano po LCD nyan papagawa ko yung ganyang unit ko

Is that glue?

May repair shop po kayo? May same issue po ako sa PocoPhone f2 Pro not charging known issue daw po?

san po repair shop nyo sir?