Professional Pipe Welding Tip (Building 8" Pipe Bumper Rail)

14 днів тому

In this video I will be fitting up a couple of 8" 90 degree fittings for an 8" pipe bumper rail for a gravel parking lot. I will be stick welding with 1/8th 8010 and 5/32 7010 also known as "hippy" rod. We got our fittings from Fechner Supply in Cushing, Ok. And I got my welding rod from American Welding Supply there in Cushing as well. I also had to bevel every single joint of pipe with my Mathey Dearman pipe beveling machine. All of the pipe we had was all "structural" versus "Tested" pipe and non of it was beveled. I will also be sharing a pipe fabrication tip/ trick that will help you stand out in the pipe fabrication world. Lastly, we are having a sale on all our online courses there on our Tradeschool website arosswelding.school To take advantage of the sale you will have to use the Discount Code: SPRING24 at check out. For any questions you can text us at the number below. Thanks for being here!
TEXT ME - (405) 643-7176
AROSS STORE: www.arosswelding.com/shop
------------------------------------------------------------------------------------------------------------------
AROSSWELDING TRADESCHOOL - www.arosswelding.school/
Free Course Example - www.arosswelding.school/shop
------------------------------------------------------------------------------------------------------------------
Free Resources - www.arosswelding.com/resources
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
JOIN THE INNER CIRCLE: arosswelding.mn.co/landing/pl...
Details about the Inner Circle: arosswelding.mn.co/
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
AROSSWELDING.COM - www.arosswelding.com/
NEW CHANNEL WITH QUICK TIPS AND TRICKS
AROSSWELDING SHORTS - @austinrosswelding
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Social Media links - come hang out after hours.
My Instagram: / arosswelding
My Facebook: / arosswelding

КОМЕНТАРІ: 47

@Hoonigan77 12 днів тому

I’m in the union working for a fab shop over here in Texas and this exactly what we do. Thanks for the tips I’m always up for learning more & keep educating myself for better

@dc85337 12 днів тому

A professional is always a professional even on junk jobs.

@woofenhooter 12 днів тому

Not a pipeline weldor myself. Only pipe experience I have was 10" and 20" dredge pipe welding. Nice work!

@arosswelding 12 днів тому

Thanks 👍

@Texaspipeliner210 12 днів тому

Let me share a couple tips with you!! 1st a piece of angle with a chain clamp on the pipe will let you fit that 90 up instead of down and make fitting easier 2nd spray some WD40 on the jack head and pipe to make rolling it easier and lessen the chance of it falling off them jack special when alone. stay safe out there buddy👍🏽

@fittergrips2010 12 днів тому

used that decades ago. Fittings can be different O.D and high low can be severe some times . There is a tool out there for 2-4 inch pipe sizes that does fitting to pipe and fittings to fittings in a vise grip format that will get you perfect space and hold one of the fittings . Ultra clamp can not do that ( fitter grips ). Austin has a pair of them

@bobroberson9286 6 днів тому

The pipe you're using there is ERW (electric resistant welded) material and the more expensive as you mentioned is seamless, a higher test rated pipe 👍

@mattbowser5274 12 днів тому

Good cut guy is key that's y I end up doin my own but I never really work with other welders or weld helpers

@timwright7824 12 днів тому

That's some serious railing, the co-op must be "hiring new grads" . You taking the time and effort to weld right just to have it covered in paint or dirt is a real craftsman. Looking forward to a finished project on this

@user-ul3vu4ks2p 12 днів тому

love the sound of that 300 idling up,music to my ears! -my pipero400 just doesn't have that beautiful tone

@alfredocortez7328 12 днів тому

That's awesome tool , that Beveler if they weren't that expensive I buy one

@halfinchholes88 11 днів тому

My thoughts also; get everything fitted properly before the first tack. Less weld, less distortion. Also, looks a lot cleaner. Keep up the great content. 8010? Gonna have to try that one.

@olddawgdreaming5715 12 днів тому

Thanks Austin, enjoyed the video and looking forward to next weeks video. Looks great and having a good time picking up what you are sharing with us. Stay safe and keep up the great videos. Fred.

@brodyvance9424 12 днів тому

I do a lot of lohi on pipe 6010 root and I fab just like that so it looks good for the customer

@hoaws 12 днів тому

Always lots I learn from these videos, love it

@BryantYazzie 12 днів тому

Clean Welds 😮 Awesome job

@arosswelding 12 днів тому

Thanks 👍

@AlpacaRenee 11 днів тому

Y’all! Buy the Pipe Fence Course! It’s really awesome. It’s so good even a girl can make pipe fence😇. Love your content Austin!

@santiagopatino274 12 днів тому

Thank you sir amazing video I will be waiting for part two and I remember seeing the other video that you put at the end short clip . Loved it 👍👍

@dblackjr52 12 днів тому

You are the man Austin, been an inspiration to me and i appreciate that you share so much detail. Of course i end up with more questions but nonetheless Gotta order up some of those thin soaps from your store soon! I like the idea of aiming smaller, aim small miss small.

@sonofbr 11 днів тому

Your welder's pipe roller is also a blacksmith's bending fork or scrolling fork. :)

@BMGProjects 2 дні тому

Austin, I work for a transmission gas pipeline company. I’ve waited on welders a bunch- tie ins, sleeves, saddles for stopple machines, headers for hydrotests, hot cuts..A lot is done just so the welder can get in the hole and do what he or she does. No offense, but I think that is why there are many arrogant pipe welders.

@BMGProjects 2 дні тому

My comment will tick a lot of people off, but have you ever read comments on a welding forum or instagram page? There are a lot of good, humble, talented pipe welders also. Thank you for the video. I aim to make each weld better because of your motivation.

@arosswelding 2 дні тому

No offense takin. I hear you. You are welcome to your opinion around here. I agree, I have met and worked with a lot of humble pipe welders myself.

@paulusmarc 12 днів тому

BON BOULO 😆😆👍👍

@elhuanimaro 12 днів тому

Please show us your welding hood, the pancake band to the head gear welding hood look interesting to see , always good work 👌🏽👌🏽👌🏽👌🏽

@fittergrips2010 12 днів тому

See you bought a box of hyp rod 7010G . In the seventies that was the go to rod running it out from the bead to the cap . More liquid than the 8010 and put on a nicer cap if one knew the trick of long arcing, arc blow ,and rod angle . Did not fill as much as the 8010 . Pipe was manufactured starting back then and 8010 was the answer for that on grades 483 (X70) Procedures are out there to weld with 8010 from the bead out to the cap . And yes the bead can be run with 8010 with out undercut on the bottom and pass X-ray

@kaleb6206 12 днів тому

Spend more time fitting les time fixing-got it

@DerArgonierer 12 днів тому

🇩🇪Danke für Deine Videos! Bin auch über 35 Jahre Schweisser! Bei uns heisst Dein "Rohrroller" :F-Schlüssel Bleib gesund Grüsse 🇩🇪

@namarhodge568 12 днів тому

Great project. A question, sense this is a big truck, big trailer, and big equipment parking lot bumper it looks like in some of those long runs of pipe you would need several "Tees" to go into the ground. Big stuff has a big push, and in one year, these long runs will look like a big snake.

@AdrianPardini 10 днів тому

Hi Austin, thanks for the instruction. I really dig the clamp you used to hold the elbows, what's its name?

@etzequielaguilar9366 3 дні тому

Greetings from Honduras I would like to work as a welder's assistant

@derekbryant6137 12 днів тому

That tool you call a pipe roller the structural world has one called a beam flipper it looks just like that only bigger to manipulate beams laying on a sawhorse and how we use it on beams as we put it on the web of the beam and pull back on it go on the direction we want the beam to lay on the horses

@brycebroussard967 11 днів тому

Can you put the 6" gar rail video in the description?

@sim6699 6 днів тому

How do you stop the rod from sticking to the metal you are trying to weld?

@MarioV256 12 днів тому

I’m open to help out Fridays if you need it Austin

@malone212 12 днів тому

What wire brushes do you use/recommend?

@Miguel21hdz 12 днів тому

How do you get your welds to look that nice

@KundaliniKing42 12 днів тому

Practice.

@itspaxton101 8 днів тому

Mr. Ross, wondering what you know about the ua pipe/steamfitters? Local 11 is ours and i plan on joining. Do you know average pay. Work weeks, and general knowledge like that? I dont really want more that 50hrs a week but pipefitters just seems like my route.

@jakeswelding6560 12 днів тому

I know this is a dumb question, but what kind of hood is that? I'm tired of my heavy miller hood, and my pancake isn't always the best piece of equipment for the job

@arosswelding 12 днів тому

It is a fiber metal brand

@jakeswelding6560 12 днів тому

@@arosswelding that's what I thought. Do you have a link for the strap modification?