Переглядів 372,615
I made a custom white PS5 with light up buttons and logo. I also changed the orange standby light to blue. Matte white vinyl wrapped PS5, modified front buttons, and back lit PS Logo.
.........................................................
Subscribe & check out my other tech restoration and mod videos!
Follow me on Instagram: / restoretechnique
Buy Me a Coffee 😄 : www.buymeacoffee.com/restoretech
Filmed on: Samsung S10e
Back lit logo mod idea credit to: / mymatevince
Music:
Select - Patrick Patrikios
jazzyfrenchy - www.bensound.com
If the following Tools and Parts lists helped you, please considering leaving a comment :)
(not affiliate links)
Parts List:
- 2 x Blue 2mm LED 780mcd Tower Type Diffused. Resistor for 5VDC: 91Ω. Typical Forward Current: 20mA - www.jaycar.com.au/blue-2mm-le...
- 2" LCD
- 30AWG Kynar wire - www.jaycar.com.au/blue-wire-w...
- 0603 SMD LED's
- 2 x 150ohms resistors, 1 x 120ohms resistor
- 60/40 Solder
- Premium matte white vinyl, with air release channels
- Crafters Choice Square Acrylic Blank 4 Pack Clear - www.spotlightstores.com/craft...
- Kapton tape
- Blue plastic film
- Black electrical tape
- Tesa double sided tape
Tools:
- Hakko FX-888D Soldering Iron
- Phillips Head #0 Screwdriver
- Torx T8 security screwdriver
- Andonstar ADSM302 Microscope
- Silhouette Cameo 4 cutting machine
- Ozito Heat Gun - www.bunnings.com.au/ozito-200...
- Custom fume extractor - • DIY Soldering Fume Ext...
- Tec 305-12 hot glue gun
- Goot Wick desoldering braid 3.0mm & 1.5mm -
- KingBo RMA-218 Flux
- ChemTools 99.8% Isopropyl Alcohol
- Digitech QM1517 Multi-meter
- Dick Smith Precision Pliers
- 1500 Grit Sandpaper
- Sharpie black oil based marker
- Precision cutting blade
- Calipers