Removing The Engine on my Mitsubishi Evolution

Місяць тому

The Drop is live! » vasyn.com «
Parts Needed for Blend Door Issue:
Blend Door: 7801A360
Cable: MR979515
Gears: 7801A110
Filter: MN185231
• Links to Where I Purchase Parts:
eBay: goo.gl/LwmuxE\
As an eBay Partner, I may be compensated if you make a purchase
Amazon: amzn.to/2z6hMbF
• Camera Equipment I Use:
Main Camera: amzn.to/2W2ZLId
Backup Camera: amzn.to/3gMgjwj
Go Pro: amzn.to/31Yi59n
Main Lens: amzn.to/2ZX7ZTB
Backup Lens: amzn.to/2W2OgAM
Photo Lens: amzn.to/2O8sc35
Microphone: amzn.to/31ZRDfo
Drone: amzn.to/3iMOIwJ
Gimbal: amzn.to/321daUZ
• Instagram: / dvniemela
• Facebook: / dvniemela
• Sponsors: (Discount Codes)
avalonking.com/ref/dvniemela (DEVIN25)
SK Tools: bit.ly/3mdXhSl (DVNIEMELA)
IAA: bit.ly/3cMmRKk (DEVIN23)
www.braumracing.com (DVNIEMELA)
www.prismaticpowders.com

КОМЕНТАРІ: 126

@Dhane-0 Місяць тому

Evo: belt squeaks Devin: I’ve slept on it and decided to pull the motor

@mfdavisca Місяць тому

Hey Devin, it would be awesome if you raffled off a tour of your shop/ a day to hang out, get coffee from the stand then work on a project you are on. Thanks for all that you do!

@Fox92Rider Місяць тому

To be honest from my experience with evo’s I always wondered the same thing with the rattle noise coming from the bottom of the car looked over multiple times could never figure it out until I switched over to the exedy twin disk with Oem flywheel not talking bad on ACT clutches cause I still rock with them until this day on other builds just thought I would let you know what worked out for me and had luck with Man every time I watch you’re videos makes me miss my yellow 8 worked super hard when I was 18 to make it a goal of mine to own one and it had to be yellow but yea I hope that helps.keep up the awesome content you’re killing it hard work really pays off much love from Colorado 💯👊🏽

@michaelhaffner9986 Місяць тому

Being a mechanic for several years, I know that the symptoms you describe (rattle goes away when clutch pedal is pushed in) about the rattling are the cause of a bad throw out bearing. I'm assuming you have a brand new OEM throw out bearing, maybe you need a stringer aftermarket one due to the strong twin disc clutch?

@JonHop1 Місяць тому

Mine would rattle no matter what on my dc5. Tried many different aftermarket ones. Once a went with a Tilton hydraulic setup, which is super sturdy, never heard it again.

@bryanrose20 Місяць тому

My throw out bearing is bad and it’s a constant rattle unless the clutch is depressed. His is just on decel. Maybe it is the throw out bearing just starting to go bad?

@monstershayne Місяць тому

And only happens in certain gear(s)?

@JonHop1 Місяць тому

@@monstershayne Could be his input shaft too... A lot of old manual transmissions are noisy.

@joemaggio6806 Місяць тому

@@JonHop1yeah I say input shaft bearing or some other bearing I don’t know the name of around there

@Margot_est_douce. Місяць тому

Your channel's commitment and sincerity are truly special. Congratulations

@13sky19 Місяць тому

Great job Devin! I always enjoy the vids! Just copped some apparel!

@Wekeslayer Місяць тому

As a evo 9 owner, I love watching Devins vids. Very educational vids, thank u Devin

@lcameeno1 Місяць тому

@Wekeslayer Місяць тому

@@lcameeno1you must be one of those tree hugging hippies 😂😂😂

@lcameeno1 Місяць тому

@@Wekeslayer ok

@firebladelover7 Місяць тому

When you come to re-fitting the head gasket, check that the head dowls aren't stopping the head fully seating. I've know this to be an issue on rebuilds before. Rare but worth a check!.

@Jdm2005sti Місяць тому

Nice work on the controls for heat control. 🎉 I’m celebrating my man always great stuff and sharing knowledge. I too struggle with the modifications on car debate often ask yourself is the clutch sound bearable or unbearable. You’ll figure it out brother 🔥🔥🔥

@graemewhitfield2940 Місяць тому

Been fitting exedy twin plate clutches for a few years. Yes they rattle when the pedal is pressed but it’s a fit and forget clutch.

@louiscongionti2394 Місяць тому

I think not having the balance shaft makes that noise that you have worse . I left mine in the motor cause i did not want the vibration cause it tends to loosen things up in the engine bay.

@MaxiMejia-vb7vv Місяць тому

Amigo amó todos tus videos onque no sé nada de inglés te sigo desde hace 5años eres el mejor 👌

@keech25h Місяць тому

You shouldn’t need a kiggly trigger to run a haltech. I still run the oem trigger plate and sensor with an elite 2500

@DevinGT350R Місяць тому

My quartermaster twin made a similar sound, although there was a lot of other sounds and vibrations so hard to pinpoint what was actually from the clutch.

@tomswindler64 Місяць тому

Very nice,good progress 😎😎😎👍👍👍

@mityadriveofficial Місяць тому

I advised U to paint main gasket with special copper paint for gaskets when u start to assemble engine. I dont know if u saw my comment.

@kyleturk6579 Місяць тому

I have normal chatter on my exedy twin disk on my 9. When it gets warm it’s less noticeable.

@LaStanley Місяць тому

Run an exedy twin plate on my evo 7 and it only rattles when you push the clutch in not when its out, pull type clutch, hope this helps mate 🤙

@EvoMakennaS Місяць тому

Love the hard work

@BNR_248 Місяць тому

Mates evo 6 did it as well, the noise was a bit worse though. My old evo 7 was fine though on a single plate exedy (AU not JPN) heavy duty clutch. Won't be good enough for your build though. Can also try OEM Flywheel, i know R34 GTRs have decel noise with an aftermarket dual mass flywheel/clutch combo. Goes away with an OEM flywheel while still retaining the high hp clutch.

@AWD_T Місяць тому

Uniclutch claims no rattle, holds all the power and feels like oe pp

@483SGT Місяць тому

I love oe pp

@user-bl6ed1dq8w Місяць тому

Got one in my boosted g37 and it’s very nice just bites very high in the pedal and has held up to the abuse

@mfdavisca Місяць тому

Same sound Devin. Evo 9, loud clutch chatter on deceleration.

@andrewdero6271 Місяць тому

It is still best to use oem clutch. But some aftermarket ones got some glitch too some needed to be grind

@boosthead90 Місяць тому

Bump for evo 👌

@MreignSupreme Місяць тому

I used to own an 8 and it did the same rattle noise on decel although it was only noticeable in 3rd gear for the most part

@funnycartube Місяць тому

My 2005 Mitsubishi Lancer wagon, non evo, has cabin filter in the glove box, and everything spins freely and like brand new.

@joemaggio6806 Місяць тому

I have the same kind of thing just on decel in my 07 civic si with the act hd street clutch. She hooks pretty good. Almost feels like that’s all the car wants to do

@Nikeguy230 Місяць тому

Man you guys should’ve made more skate decks!!!😤

@joelh3364 Місяць тому

Always educational. My 8 only had a single plate ACT, so I'm thinking the sound may be normal for dual/triple ?

@cloudgaming3043 Місяць тому

Naw it’s pretty normal on ACT clutch kits especially when paired with lightened flywheels. Just fyi

@cloudgaming3043 Місяць тому

If i missed this my bad but are you running a lightened flywheel? If so move to an oe or heavier fw and that should get rid of the chatter on decel

@DumbTheories Місяць тому

My built to the hilt evo 8 had a exedy triple and sounded like that, prob a bit louder even. It is what is is lol

@JamesMcMahonAU Місяць тому

Mine does it and I was hoping you were going to solve the mystery.

@dankimir8593 Місяць тому

Have you checked the serpentine idler and tensioner pulley bearings for play? I had a decel rattle noise in an 8 and it turned out to be the tensioner bearing.

@Ebokevo Місяць тому

I have a fully built evo and i put a exedy twin disk and it makes no sounds shes mint

@jclc4201 Місяць тому

The upload today is early. Lets go.....💯💢💥👌💪

@sf2372 Місяць тому

Was the first mod on my Evo 8 adding a cabin filter.... all those years ago now.

@deanoramsay40 Місяць тому

Up bro

@maxcotter1905 Місяць тому

Yes my clutch master twin disc makes the same noise evo 8.

@Anfurnyy Місяць тому

I don’t have an 8 or 9 but I’ll chime in since it’s related. I’m running a act 2900 kit on my 1g making 750+whp and 600ft/lbs and it’s holding just fine. Not sure that twin disk is REQUIRED for what you wanna make.

@Steve84902 Місяць тому

Twin plates are noisy mate but they hold good power. My mates in the same too

@Ryan_1997 Місяць тому

Lmk if you decide to sell it. Buddy of mine has this same model evo and color. Been wanting evo since they came out.

@sk8mike_1 Місяць тому

I have a 8 with a "stage 3" competition clutch and mine does it but it is not loud at all. You can hear it for sure with no music or anything but it is faint for me.

@JoeyLace193 Місяць тому

I've got a ND unsprung triple plate clutch in my 8, that's a noisy thing. Rattles somewhat when the clutch isn't pressed in. Then makes a horrendous noise when clutch is depressed. Just got to live with it if you want a high HP evo

@tonytony3577 Місяць тому

Exedy twin disk . You used to install them before.

@JonHop1 Місяць тому

Is it the TOB? I had a similar sound from tiny play in the bearing. I went to a Tilton hydraulic TOB and never heard the sound again.

@Yamaharidr310 Місяць тому

My 04 was making 800whp with an Exedy Twin and made zero noise on decel.

@isayahjimenez5305 Місяць тому

I got sweatshirt and a tee and a banner 😎💪🏽

@s4ms0n1t3 Місяць тому

When I had a LWF in my e46 m3 NVH under deceleration was looooud

@RyneDickens Місяць тому

Mine has an Exedy Twin and it sort of always made noise, I just always assumed that it was the cost of running the aggressive clutches. Cause, race car 😁

@kevinstier4953 Місяць тому

I wonder over time if the heat is what causes the blend door to get hard move because it's made of plastic.

@Soulsmoker476 Місяць тому

Exedy hd twin plate on Evo 9 running 700 no noise at all

@Dalekennth1969 Місяць тому

Hello will you be abel to put filter in with out taking it all apart again

@BYELUCKS Місяць тому

please make evo skate deck👌🏼👌🏼

@xadoptedbabyx5508 Місяць тому

Damn skate deck is sold out already rip but also good for you brotha

@Nikeguy230 Місяць тому

They restocked as preorders

@jackbuildsit Місяць тому

Mine makes some noise but not bad (Exedy twin)

@sebfullick5011 Місяць тому

I have an Exedy twin disc and does same thing. Normal

@itsvitex Місяць тому

Dont quote me on this, but could that clutch noise be louder because you didnt put the firewall padding back on?

@chivigonx3 Місяць тому

My 05 srt4 has a stage 2 act clutch and it has crazy shutter clutch... it's probably a act clutch issue

@mitchdilsaver5798 Місяць тому

Quartermaster twin disk with HOB for the win. Trade your rattle for twin disk rattle. Lol

@khazi.4g63 Місяць тому

i have a fully built 8, i dont have that noise youre experiencing, im running an exedy twin disk

@cloudgaming3043 Місяць тому

ACT clutches tend to chatter on decel. Well known and documented issue they just wont fix.

@codykounce1097 Місяць тому

Yes my buddys evo 9 makes an absurd amount of noise that sounds like failure of something but turn out to be “normal”

@andyvang6549 Місяць тому

You should put l19 stud on this car

@nickdoescher9957 Місяць тому

Isn’t the balance shaft deleted in this engine? Wouldn’t that get rid of your vibration from the clutch and isn’t that what it’s used for.

@jacobflemming5091 Місяць тому

Evo 8 here 550whp with a exedy twin and I don’t have that issue sir!

@boostgaragebuilt1363 Місяць тому

Yes it is very normal for an act clutch to rattle like that 💪🏽

@chrisH94 Місяць тому

Yes sir 8s and 9s all have clutch chatter with upgraded clutches

@carlallen1231 Місяць тому

Maybe the clutch sounds louder than you’ve heard before because you’ve removed the firewall cover in the engine bay

@itskittens Місяць тому

my old evo had the exact same noise

@KeViNMCMXXCIX Місяць тому

Cool drop! It's commendable how meticulous and thorough you are.

@ryansears9268 Місяць тому

The exedy twin disc is a lot quieter

@cmeifucanEVO9 Місяць тому

Yes both of my 9s made the noise. My current 9 is louder than my original 9.

@user-xf8yr5ot4s Місяць тому

In out in out in out . That engine has been out more times then a strippers snatch lol . Keep up the good work. Awesome build

@jacobmarty5111 Місяць тому

what if the zink plating messed with the trigger somehow

@aldolara2815 Місяць тому

Bro you should build a S550 mustang. Something different.

@CypHill Місяць тому

Is the deck flat?

@STIStuff Місяць тому

That decel noise is from lightweight fly.

@chaseMcCoyc Місяць тому

Evo 8 does the same thing with exedy twin.

@maximilians9643 Місяць тому

i missed what the power goal is?

@sf2372 Місяць тому

Good time to double check the trueness of the mating surfaces maybe

@Sizzleracer Місяць тому

U need more mitsubishi evo stuff so I can buy

@Zerkkys Місяць тому

gym vlog when

@SergantMula Місяць тому

👍👍👍👍

@gaberodriguez8435 Місяць тому

Red calipers would fucking kill this build ❤❤

@xxtimeisthefireinwhichweburnxx Місяць тому

I wish he would sell us sheets of tiny American quarter sized Vasyn "V" emblems on high quality 3M reflecive paper. (like the high visibility tape on road cones and vests) I think people would set their phones down on a small table or shelf and ninja star their wallets at the phones if he sold those because people love tiny stickers...

@ahallhockey Місяць тому

Evo 8 with act single. Makes the same noise as yours

@johnjbateman Місяць тому

Your videos stress me out. I could not keep my cool as much as you do

@jonathanklenner2678 Місяць тому

Whats the white stain on the seat belt 😂

@daytonwells1722 Місяць тому

Got an 03 Evo 8 with built motor and twin disc clutch. It’s always made that exact noise on decel and it has always driven me absolutely nuts. Sounds horrible and anyone who rides with me is like wtf. From everything I read it’s totally normal for the car

@daneyoung7770 Місяць тому

100% normal. Exedy, ACT, XClutch and Comp all do it.

@JonHop1 Місяць тому

I think it's the TOB tho not properly holding the clutch in place. When I went with a Hydraulic Tilton tob setup, thing was super quiet.

@davidviana4277 Місяць тому

sounds like the clutch buzz issues that some s2000s suffer from. Only way to fix it is to replace the clutch

@culpritmedia7026 Місяць тому

Uniclutch, brother. Uniclutch.

@bigsingle6581 Місяць тому

Definitely unclutch, go with a sport will hold all the power

@lancetitus9816 Місяць тому

multi plate clutches are just going to ratlle. its normal.

@Itsmeart1988 Місяць тому

It’s louder cus you took off the firewall/bulkhead factory thick sound deadener…….. it’s gon resonate inside louder my guy

@Martegiani Місяць тому

I bet that rattle is because ACT uses a lighter flywheel that cannot dampen the motor harmonics enough.

@JonBonazza Місяць тому

I can’t recommend ACT clutches to anyone. Too many issues in my experience.

@TheBigCes Місяць тому

Pop pop

Місяць тому

Can you make bed spreads too and shower curtains lol jk

@husamsalhi6071 Місяць тому

change the flywheel, the rattling will go

@randygalati Місяць тому

It would be amazing if the brakes were painted a vibrant purple, on the yellow it would go wild!