Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) ukposts.infoUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.

Even if I have the skill and knowledge, I still can’t do his job. I just don’t have the patience. Anyway he did a fantastic job on restoring it.

Nice restoration gudjob I'm aircon tech. Tandang sora quezon city

You should wear gloves all the time during your work........😊😊😊

I dont get it why would you buy a used ac throw it in mud then do a restoration video? Cant you find real restoration worthy products???

Fixing gas leakage from the evaporator coil makes the entire evaporator coil looks like a new one. Man, that is amazing 👍.

nice video congratulations

I think this brother trashed the air conditioner himself and then cleaned it himself and then repaired it himself.

Bravo mr et merci pour ce partage

Phục hồi funiki thì 100% anh em quê mình rồi. Video quá hay ạ.

Ohhh awesome restoration....

You replaced the radiator because the old one was badly damaged and the remaining paper marks that were removed from the new one are still attached to it. But its a nice job well done

سلمت يداك ❤❤❤❤❤

Thanks for the video. It would be great if you put subtitles in the video for the names of parts like compressor, heat exchanger etc.

Can you connect an indoor unit to any outdoor unit?

Yeah… that’s the right way to check A/C board, checking continuity on the same line 😂 @ 10:48. Just show that the meter moves 😁 nice one!

I enjoyed this video. Hard to believe before and after. Excellent restoration. Thank you very much for sharing. Looking forward to your next project.

Good work need this kind of skiils

good work, thanks

Hi Good morning Super Service ing Ac super pant ing You are good mackaink ❤

you are the best , thanks

Nice and clear and cool.

Merci pour cette vidéo .

I get this like this too your the king of fixing things

good job🎉 👍🏼👍🏼

Thanks

Great job, you are talented. Best wishes .....

gas refill meter is awesome. absolute precision. King of Restoration

Good job

Good job my friend

Vidéo instructive, mais il aurait été très intéressant de nous montrer les performances avant et après restauration, la température par exemple, en réfrigération ainsi qu'en chauffe...🤔 On voit juste que cela fonctionne, rien d'autre. ☹️

I'ts very nice air condioner

he used the multimeter to check direct points which will show continuity anyways. This shows he has no idea of the PCB.

Nice one, I wish to know how cooling coil is cleaned up

Bravissimo 💯

Such a great job ❤

Good job hamara bhi 2 tan ka ac esa hi pada h us ko bhi thik kr do

как он проверял цепи просто бомба

Good job bro.

my God there's sooo much dirt!How can an air conditioner can get this dirty?And I got my answer from the video itself because it was outside but I don't care.Great video man!!

great work but u didnt clean the frigerophique circuit with gazoil or some thing ...and u didnt clean the evaporator with some clor production to being a really blue :)

They have changed the evaporator coil 😌 although that was the best disition because old one had leakage from the middle.

Ha ha what did you check with the mulimeter...conduction of a conductor?

THE EVAPORATOR DIGITAL DISPLAY DID NOT WORK. SO IT IS NOT 100% RESTORATION. BUT I GAVE YOU A THUMPS UP ANYWAY. OVERALL IT WAS A GOOD RESTORATION/

good video but when you put freon in flip tank upside down to get the liquid not just the air!

❤❤❤😊😊😊🎉🎉🎉 . THANK. YOU FOR TEACHING ME. I HAVE LEARNED ALOT FROM THIS. YES I USE TO LIVE IN SEATTLE AND DIDNT LEARN MUCH FROM MYFATHER AND NOW LIVE IN EASTERN WASHINGTON, AND HAVE HISPANIC NEWPHEWS AND SAMETHING TEACHING METHINGS. AS MY NEPHEWS SAY IF MAKE A MISTAKE,OOP😮 TEAR IT APART REDO. NOW I AM NOT AFRAID. YES MY FATHER HAD MONEY BUT NICE TO LEARN. THE SAYING---!! NEVER TO OLD TO LEARN THINGS... MUCHO GRACIAS SENOR🎉🏁🏁🏁🥇🥇🥇🥇😍😍😍😊😊😊😅😅😅

Rất nguy hiểm cho người ko hiểu vì bên trong điều hoà có khí gas. Dùng đèn khò mà ko xả hết gas sẽ dẫn đến cháy nổ chết người đó.

did you vakuum correct? after plug off the vakuum machine, the air filled to the pipe?

I enjoy watching from start to end, i just notice 10.55 its connected thou

Very good, my friend! Congratulations! A thousand likes for you from Rio de Janeiro.

should change oil in compressor

Cooling coil new daala hai

Tay nghề quá cao luôn, góp ý là các b làm thêm công đoạn bảo dưỡng thay dầu block nữa chạy cho êm ❤🎉

Very good job

Hay cosas ahí que jamás debiste haber pintado, como las piezas de transferencia de temperatura, ninguna de ellas.

Super bro nice I want work form you

Watch in 2× and save your 20 mint , want more save than 10 second forward 😂

형태예요☆ 택배거래만 가능합니다 반값택배 아저씨 아저씨 아저씨 너무 귀여워요 일 오전 서울 중구 프레스센터에서 오늘 늦은 오후에 비가

THANKIOU

Nice work carried out my boy .... Come to Pakistan, you'll earn a lot :)

u tested compressor after connecting it to condenser, and u did not test condenser leak, but good job

Awesome and outstanding 🎉

Hebat anda sudah memiliki peralatan kerja yang lengkap dan pengetahuan yg banyak

Great job😊, good luck

fan thermos and regulator,,,,,,,,,,,,,,,,,,,,,,,hot weather and cool weather

Mntaaaap

Eso es lo máximo tremendo trabajo eres el mejor así es que se trabaja 🤠

loved the video that was a very nice job young sir keep at it all the best

What resourceful bloggers! They will roll things in the dust, throw a couple of leaves from the tree inside and saw the content!

+1 From Turkey.Nice video.

Men of culture assemble

non filter best and best withh clr sspray.

Nice one I went to learn some to make my work

👍🏻👌🏻👏🏻 wow perfecto

Nice servicing

Hay quá❤

Quả đo bo mạch để thang 10k đo là hiểu rồi🤣🤣🤣

Маляры на связи?) Как вам техника покраски?😂

Very nice 👍

So hard to believe!

$599 on Amazon for a new mini split.

Nice bro

😊😊 very good 👍 👌 👏

No Brazil, nâo compensa restaurar um eletrodomestico. as peças, e a mâo de obra ficam mais caro do que comprar um novo, nos temos que jogar fora nossos aparelhos usados. sentimos muito por isso.

Эти специалисты смогут даже фарш обратно провернуть . Сила видеомонтажа и ловкость рук ))))

Phục hồi đồ phế liệu . Quá rảnh rồi .

😂😂😂😂Plenty of Bluff here but nice job.👁😂👍

Excellent

除鏽要用噴砂效果比較好。

Hàn lại mà vẫn phải thay nguyên dàn lạnh mới haizz

This is what you call AC repair not just filters change.

Excellent job!

indoor unit , swing flap is incorrectly inserted , it should be rotated and then inserted . else it will not close properly when u turn off

This is a best video ❤

Where can i get that magic paint you use it would be great to paint over lables and when it drys the lables come back will save a lot of time as will not have to mask up any cars paint them and the windows an lights all come back and will not have to clean them

No need to repaint, just spray with h2o2 and put under the sun, the casing would back to white like new. My job is recycling refrigerator and air conditioner in indonesia, and it worth to do

Парнишка воздуха поддал знатно, не продув фреоном шланги, и окалины добавил паяя без азота. Сам компрессоор зачем выпаивал? -Выдернул бы потроха без разборки контура, и раз уж опрессовал в ванне испаритель-конденсатор нужно было так же прессовать и искать пузыри. Сама опрессовка на низком давлении проведена, 20-25 бар-мало, есть утечки которые до 35 бар молчат, а 40-42 пузыри пускают. Если прессовал не азотом, а воздухом, о чём косвенно подтверждает надпись на баллоне-добавил влаги в масло, хотя кому я это объясняю... Оба стартовых электоролита под замену-по сроку службы. А в целом зачет-если время некуда девать).

great work, but can similar remote be used?

No nitrogen to clean the system ?

Haw many people watching 2x speed 😅