Review of Benewak TFMini Plus LiDar laser 12m distance sensor

День тому

This is Amazingly accurate LiDar 12m Laser range finder from Benewake.
The best thank you for me is to not to skip ads and Subscribe 🔔 to my channel, like 👍 the video It is greatly appreciated. 🔔 😊.
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe and enable the bell 🔔.😊
Jump to different section of video by clicking on the time:
00:00 Start
00:38 Introduction
06:21 Wiring Explained
08:44 Demonstration
14:16 Issue with the software
***Purchase this item from **
Amazon USA: amzn.to/3oOjAPH
Amazon Canada: amzn.to/3gE64em
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe.😊
TfMini Plus Lidar page on Benewake.com
en.benewake.com/product/detail...
****************************
Arduino Step by Step Course (over 100 lectures) Starts here • Lesson 00 What is Ardu...
Learn Arduino in 30 Minutes (video): robojax.com/L/?id=135
****************************
Supporting via PayPal: bit.ly/rj-paypal
Follow me on Facebook robojaxTV
Follow me on Twitter: / robojaxtv
Follow me on Instragram: / robojax
Tutorial by Robojax.com
Get other projects code and learn Arduino
robojax.com/learn/arduino

КОМЕНТАРІ: 32

@018_meet_shah2 2 роки тому

Thanks for review. I wanted to ask while communicating with USART what do we get through RX terminal? I tried to find on internet but couldn't found one.

@user-es6sx1tk1u 7 місяців тому

ttl to uart module comunication level is 5 or 3.3 ?because lidar is 3.3 and can be damage with 5v in its rx

@KC-vp7wn 3 роки тому

This is pretty cool. Many years ago I designed a project using a waterproof ultrasonic transducer to measure water height of a flowing river. You could program a sample period,store the data in a SD stick and it would go to sleep to conserve the battery. This device would be fun to play with? Thanks for the video and it looks like you dad fun with it.

@robojax 3 роки тому

this module will give you data. microSD card is separate module for Arduino and you can save it very easily.

@nqaiser 4 роки тому

Thanks for the review. It could be great if you could conduct standard trials vs measured distances and measure total error. Also it could be good to see impact of material type being sensed on the error value.

@robojax 4 роки тому

you are welcome. I am planning to do that in coming weeks.

@superliegebeest544 2 роки тому

Maby iam all wrong, but could this be used like an ir sensor? Like I am building a automatic fridge like a vending machine and at the rnd it has an convayerbelt to trow out the product. I planned to use the traditional waterproof ir sensors but after seeing this maby this can monitor the inside of the machine to find errors if a product gets stuck so this one sensor can replace all the ir sensors.

@YbborNetsrek 4 роки тому

Great review. Please test it in sunlight, rain and fog as well if i may suggest. And even underwater, as it it watertight.

@robojax 4 роки тому

Thanks. Sure I will do that. I will try it with practical application.

@user-qv6ej9og4b 3 роки тому

2020.07.05 i tested it in bright sunlight, and it showed a lot of errors in sunlight. I couldn’t conduct on rain and fog, but I think I will be more confused.

@mhdysyfq 3 роки тому

Nice review. Please make tutorial about how to connect this tfmini plus to i2c mode

@robojax 3 роки тому

Ok I will try

@MagsterMagic 3 роки тому

@@robojax did you menaged i2c with ardupilot?

@rakshithrajkumar5751 4 роки тому

Can we interface it with particularly 8051? If not, can you suggest any sensor that can measure a distance ranging from 10cm to 10m

@robojax 4 роки тому

I don't know what 8051 is.

@nqaiser 3 роки тому

I believe it should work with any device that supports an rs232 uart. However parsing the response string from the sensor into a useable valid may require a lot of programming. You already have ready libraries for arduino, for 8051 you would pretty much be doing all that yourself.

@earlsark 3 роки тому

Nice... Ia this sensor can monitoring level tank > 10meter ?

@robojax 3 роки тому

thanks. I have not tested it. Never thought it would be used for liquid.

@itechnology1272 2 роки тому

Hi, Please suggest me.. can i use this sensor to the welding torch? i wanted to measure distance between Welding torch end to the welding job. can it measure the distance at the time of welding is going on?

@robojax 2 роки тому

I am not sure . I do t know what types of rays imitated when welding. Why uAE this long range sensor ? Use ultrasonic sensor ukposts.info/have/v-deo/e6B0gJdtZ41_uY0.html