If I ever owned all those metal machines, I would buy some plans for a mini V8 and spend a year building one. That would be an awesome project that I would love to do in my spare time. I have no idea where I would get plans or the metal but I would be busy for a year learning how to do something with a project I would enjoy. I love the satisfaction of a creation coming alive! But I have no place for the equipment and Im not going to pay for someone else to do it. Maybe one day I will hit the lottery lol. You are doing a great job!

fantastic work ,,, it allows some viewers to understand the basics of a rotary pump ,,, fuel piump hidrulic pump ,,, and if u run compressed air trough the pipes it becames a pneumatic motor ,, 👍

I insist, what a genious you are!

I think it would have been less time consuming to just pour the oil from one jug to the other.

Very good and impressive video and pump. Great appearance too. One can see the rotor work and suck and push oil through just curious to know what pressure it achieved. Splendid job😎👍

The captions are subtitles. Whatever you wanna call them are not on the screen long enough to allow the viewer read

A metal engineer AND artist.

The hummingbird looks great, Robin!!!

It is very close to a parasitic pump but without the tubing. I would guess because of the design you could get a pretty accurate and consistant flow rate from it unlike many other pumps. I was wondering why the thing was eccentric in the beginning but it made sense when you put the rolling pins in it at the end. Do you sell something like this?

Love the concept, great job ! I really would like to replicate this type of pump. Could you be so kind to provide some basic/fundamentals dimensions (rollers, grooves..) ? Thanks in advance and keep up the good work !

We require you to connect a pressure gauge at the outlet.

Is your lathe outta line........? c.5mins, looks wobbly on piece reversal. Good work all in

Mmmmm, brass. Isn't it lovely stuff?

Bravo 👏👏👏

nice bild ! cheers ben.

Dein Name ist Dein Programm, meinen Respekt dafür. Dein professioneller Umgang mit dem Werkzeug zeigt viel Erfahrung damit zu haben. Es gibt bestimmt auch einen Plan, aber wo ist die Druckseite und wo ist die Saugseite bei dieser Pumpe .... oder ist das ein Geheimnis ? Ich kann nur philosophieren. Insgesamt ist das aber ein gutes Video.

Почему на хомутах люди пользуются шлицевыми отвертками, а не головками😂 в пальцы их втыкать приятнее??

Seen hundreds of them in the fronts of automatic transmissions. That one might last a little while, being made of brass... or was that bronze? Aluminum/bronze?

you just made fuel thiefs wet dreams here in the uk lol

So glad I found this channel. Very cool pump. Subbed here

Mantap...👍

nice.

бочонки нужны на первоначальном этапе, когда масло в системе, они уже не нужны

They want hundreds of dollars for some of those battery pack transfer pumps. A lot of pumps use the offset design like vacuum pumps, cheap air compressors.

Does it function thanks to centrifugal force ?

Beautiful job!

Quante atmosfere può generare?

La segunda rolinera , la que va pegada al vidrio no hace nada realmente, en corto tiempo esta bomba no funcionara correctamente , lo hara por muy poco tiempo, diseño deficiente.de hecho el ruido del taladro electrico es uno y fijo , y con la bomba va cambiando , no aguantara una hora funcionando sin detenerse , de hecho se nota el cambio de sonido cuando la rolinera falla y se detiene intermitentemente, por lo demas un trabajo de torneria muy bueno.

The space shuttle has less work to do than what you are doing.

Wow great job, hope to se more test in this project it have to much potential, like an small hydraulic pump for a little piston how much pressure you think it can develop?

❤❤❤❤❤❤❤

A real Lathe Master would have cut those flutes in the lathe not on a mill....lol. just messing around. Great job.

💯💥МОЛОДЕЦ👌

👌👍👍👍

18:59 масляный насос?

Oh dear...........

01:07 así no se debe medir

It's not very clear what this video is about. The title clearly states, "This is a pump with a clear opening that is clear." And what it will do: pump the liquid. You will show HOW it pumps if I watch. But, 90% or more like 98% of the video is making the device (with technical notes flashing by) at high speed. With less than a minute left, the device is connected and tubes fill with liquid. Familiar with rotary pumps, vacuum pumps, rotary compressors and this particular wack-a-doodle so I was WATCHING for it but you don't show how or say "how it pumps the liquid". I want to offer constructive criticism as a viewer looking for people making things with emphasis on methods and materials and of course, how things work. The gold standard for this is This Old Tony. Diresta is the master at pacing, W&M Levsha, Inheritance Machining, my mechanics, are also good examples. Title of the video should be exactly what is in it, word for word. Watch How It Pumps. Edit. It's better to show a few seconds of each different thing than 3 minutes of the same thing, no matter how fast it is. Most of the video should be normal speed showing or telling why you are doing something. Every shot is a new experience. Speed=hurrying. Speeding something up happens for only two reasons, it looks cool or to save time. If everything is sped up it just says you're trying to hurry so you don't waste my time. But you are. I don't want to see you make it, I want to see HOW you made it, including footage of normal speed with ambient sound. Attention is based on expectations being met. This is a 7 minute video, at most. But it would get over 100k views if it showed HOW you made it HOW it works and some numbers to compare it to other similar pumps. Static pressure, flow rate, etc flex the brain. On the plus side, your camera and lighting are beautiful, you have control of your machines and seem to know what you are doing. The thing itself is gorgeous and unique. You want people to learn something from your experience and that's a good thing. ok tl;dr It's ok to talk.

too much detail 😄😄👎👍

That pump sucks! - In a good way.

Brasa is beautiful, seems like gold, all of us loves brass 😄💚💛🧡❤️🩷🩵💙💜🩶🩶🤍❤️‍🔥