Wow that turned out fantastic! I really like your additions to the Rockler solution and the raised panels turned out looking great!

Yes to the raised panel tutorial and excellent commentary at the ending, who's giving cookies to mice anyway - now if a moose asks you for a muffin, that's a different story all together.

Thanks for all your hard work to present this project in a very clear manner. Yes to the raised panel tutorial.

Wow. What a great storage router storage 👍

Yes, please make a raised panel door tutorial.

Brilliant, even though it wasn't entirely your own design it's a excellent use of limited space.

Love that door

Yes to "Raised Panel Door" tutorial. Great video by the way. Gave me a lot of ideas.

You did a beautiful job. You know what they say about mechanics… Well quickest way to tell what type of a woodworker someone is, is to check out their router table set up. Lol.

What a wonderful video. And YES to the video for shaker doors.

I'm a sucker for using walnut in my shop furniture...I call it 'Pin striping the Pinto'. It just makes me giggle. Nothing elaborate, but pulls/knobs/trim can all be done from off-cuts, and it really makes shop furniture pop.

Your sage advice on cookies is spot on! And the router cabinet mods are fantastic! Thanks for sharing!

Nice job as always!!

A raised panel door would be awesome. Glad to see you on this side of 2021!

Wow a 2 for .. Unnecessary Walnut plus and raised panels greate looking job!

You should make panels for the router enclosure out of walnut that attach with magnets

OMG That's awesome brother

I used diamond plate for outer doors, looks way cool, I like your doors for my kitchen not my tools, nice work

You do good work.

Yes to the raised panel tutorial!

WoW... fabulous

Great looking addition to that Rockler router table. Thanks for sharing.

Cool build! You made that look like the Bugatti of router cabinets.

Loved this! Looks brilliant and really satisfying! You definitely made the most of every inch of space you needed!

WOW!! What a great look and improvement. I especially like the use of T-track for the feather boards. With you and Drew always using some"unnecessary walnut" in your builds, I've been adding " unnecessary Purple Heart" to my projects. I like your attitude about shop projects and using them as a way to expand your skills. I feel the same way and my new assembly table will have some complicated Japanese Joinery in its structure. I try to learn a new joint each month and right now it's Japanese joinery and It usually takes much longer than a month to learn each of their joineries. They are like really difficult wood puzzles, lol.

Dang, you really maximized the space on that cart. The idea to use a piece of t-track to store t-track related items is genius, and I'm embarrassed I've never thought of that before. Mine just clutter a drawer. Great video.

Great work!

That looks so awesome! Thanks for sharing ur way. Well done Marc!

Awsome build. Pure awesomeness 💥👊🏻

Those router bit setup blocks looked cool!

raise panel door tutorial for sure!

Looks great!

Looks great and very organized, nice job

Yes, please! I’d say you improved on the plans quite a bit! Great video and project, Mark!

Wonderful additions!

Awesome! I just rewatched this and I'm stealing some of your hacks for my router table. Like you, I really need to maximize my shop storage space.

Looks great! +1 on the tutorial for a raised panel door!

For making the cabinets and drawers, I would use the Rockler 45 Degree Lock Mitre Router Bit. One set up and you're good to go. I have one that I bought from Lee Valley Tools here in Canada and it's a wonderful thing. perfect corners every time.

Stunning work, as always mark!!

Not bad bro I like it.Thanks for sharing

So nice brother. I really need to make this for my router table.

You did a great job with your first frame & panel door. The only thing I typically do differently is prefinish the panel, so when it expands and contracts, it is less likely to show a gap strip of unfinished wood. It also helps you pop off any excess glue squeeze out that gets on the panel during glue up.

That's a great table set up you made there

I'd like to see a video on how you use the Pro Max router fence

love it, only way to go.

That's an amazing upgrade. Now I need to get that router table! I have 2 shop-made ones that aren't as precise as I'd like. Thanks for the video!

That looks awesome! I like the way you upgrade the shop furniture with Walnut. Raised panel tutorial - Yes Please!

Awesome

I am always looking for creative storage solutions in my tiny shop. Never thought about adding some sort of cabinet to the side of my router table. For me it will be a place for infrequently used things, but it will be using otherwise wasted space. Thank you.

amazing how your router table turned out. Yes I would like to see a full video on How to make a Raised panel door.

Beautiful work...subscribed!

This is great.

Yes I would enjoy a video on the dood

Nice.

Fantastic work, dude! It looks amazing now! 😃 Stay safe there with your family! 🖖😊

Yes please do a raised door panel video. Lets see a detailed look.

Mark this came out awesome. Just heard about it on the podcast and has to come and check it out. Glad I did for sure! Now I need to get one of those router tables!

That turned out so awesome man! The screws in the handle slots to hold it temporary is such a simple but awesome tip! Great build and video - for some reason I now want a cookie?!

Came out great! I’d love to see a raised panel tutorial. Up vote here 😄

I know this comment has nothing to do with your video, but I am listening to your podcast and just heard you guys discussing youtube comments. "I am very confused about your anger. Do you need a hug?" I am laughing so hard I can't breathe here. That should make it onto a T-shirt. #unnecessarywalnut Cheers.

Great job looks awesome. A raised panel door video would be nice.

Fantastic use of space, nice work! IDK... if that mouse is going to sweep and mop my floors, he can have the cookie. ;)

Great project. Yes olease, Gunflint panel door video please. I can see you put one in the walnut eating Fisher's face :-P

I totally want a video showing how to do those panels! What was that spacer you used for the router bit height?

I would like to see the construction of a raised panel door. I am more curious than actually needing if for any project I would ever attempt.

"Wobbly Bits" , we'll have you speaking UK slang in no time. Bob's your uncle!

Hi Mark, the storage solution came out looking great. You can never have enough storage or clamps! Can you share the specs of your dewalt nailer and do you rate it? Thanks

Loved you ideas to modify the plans. What is the gold colored tool you used to smooth the bit holes (at the 1:43 mark in the video)? I don't see it on the tools list. Where can I get one? Thanks

I would love to see the raised panel door video.

raised panel tutorial please!

Hey if I had all those rockler tools donated to me... just kidding, nice video Mark, lips and tongues.

It’s easy to build something following plans if you are going to make changes to them, basically if you cut something wrong (oh look I have made one of my changes) instead of admitting that you have made a mistake.

Would be great to see how you made those doors.....and did you buy those plastic set up blocks?

Nice looking build! I just posted a similar router build as well! I like the brackets for holding the fence on the back I’ll have to add that. Btw how do you like that Earlex sprayer?

That’ll be great on your desert island while you’re building coconuts!

Only thing I don't like about it... Not enough unnecessary walnut.. Nice job.

What brand is that chamfer bit you use in your drill?

Raised panel +1 please

Why do they call it a cabinet carcass? I always thought that sounded gross.

I am building a Barndominium and making ALL of my doors (Front, Interior, and Kitchen Cabinets) with raised panels. So, YES I would love to see more raised panel videos. BTW, the Barndominium build video is on the way! Subscribe so you don't miss it!

If you build a man a fire, he's warm for a night. If you set that man on fire, he'll be warm for the rest of his life.

Congrats on yet another Rockler Router table storage video. ukposts.info/have/v-deo/cJqgeZWrkaKgxmQ.html . My 2 router tables in the shop do not roll around. I built a large wall cabinet to house all 9 handheld routers, bits and accessory's. As you get older bending over to get things tends to wear you out. I have used this same set-up for over 30 years. Roll around units have their advantages if you are limited on space but I have never liked the fact that even with the brakes on the wheels, they don't feel solid. Dust collection hook-up becomes another issue. And yes always have spare walnut in the shop to give that shop project a bit of class!

If you are the kind of person that likes to get what you pay for, then read on. Very disappointed in recent purchases of their "Rock-Steady" components. Wanted to duplicate a workstation with sliding drawers so I ordered all the needed components from MN. Here's the problem... the pre-drilled holes in the drawer brackets and the horizontal slots in the cabinet member of the drawer slide, do not align. This makes drawer slide installation impossible without breaking out a drill and drilling new holes to accommodate the cabinet member of the slide. Also, the hardware that comes with the Centerline drawer slides are wood screws only and not machine bolts and nuts. Now you have to purchase or provide additional hardware. Nice. If you are building a configuration for drawers, you will need vertical center supports to accommodate brackets. However, you will find that installing drawer brackets on these center supports is a challenge, again due to slight misalignment of pre-drilled holes. You will need a drift, an awl or possibly a clamp to assist in the assembly. The overall experience has been very negative, and Rockler folks seemed indifferent to the issues. If having drawers is your goal, then this is not a "plug and play" solution nor a simple bolt together solution. How can a company sell expensive components to customers knowing the products do not perform as advertised? Rockler employees and management were disinterested in addressing the issue or helping to facilitate a solution. Tried to contact upper management since this problem is so serious and obvious, but I am still waiting for their response. (By serious I mean selling items to the public when you know the items do not perform as advertised. There is a word for that.) Should my situation change, I will gladly update this comment or post a new comment here. Meantime, as a service to other customers, I will post this experience at other locations. Rockler's "we just don't give a s**t" attitude to customer experience makes future purchasing decisions easier.

I always use my brain incorrectly. -Davis

Gross little home invaders indeed. I’ve always wondered about that book. The Patreon offer stands if you paint it...

I bet you could get 100 pounds in that little drawer, if you really tried. ;) “oh that, that’s just wear I keep all of my solid tungsten” 😂😂

You said "wobbly bits". Lmbo

Squeak.

Leave it to me and find something totally non project related in the video... But, what happened to your miter saw fence that you built??

I regret buying Rockler router table top.

That's a sh@# load to much for my brain. I wouldn't be able to figure it out even if i tryed

I'd be interested in the detailed door video