Shimano Di2 Wireless Module Installation // EW-WU111 ANT+ Bluetooth LE

День тому

Installing the Shimano Di2 EW-WU111 Wireless Module into the seat tube of my new Giant TCR Advanced Pro 0. It wasn't all smooth sailing. Here's the process I went through to make my Di2 system both ANT+ and Bluetooth LE compatible. Please hit SUBSCRIBE to support this UKposts channel: bit.ly/3aUph9W
Links:
EW-WU111 Wireless Module (Amazon US) amzn.to/2VtmR9h
150mm Di2 Cable (Amazon US): amzn.to/2Rxhbf9
Di2 Tool Thingy (Amazon US): amzn.to/2LPnWnn
E-Tube Compatibility Chart: goo.gl/i5NaH4
-----------
Instagram: / gplama
Strava: / strava
Twitter: / gplama
Web: shanemiller.net
-----------
#cycling #giant #di2

КОМЕНТАРІ: 418

@kimsaeter 11 місяців тому

This video is still a lifesaver in 2023 - thanks alot

@jimandchrisphillips 3 роки тому

Just wanted to thank you for all of your extremely helpful videos on Di2, adding the wireless module, E Tube project, etc. Everything you covered was spot on, and worked exactly how you showed it would, including the wireless module quitting part way through the initial update and bricking the bike! I would have been in total panic mode, but I just followed your steps and it worked the second time and all works great now. I had the opportunity to spend a couple weeks in Sydney and the east coast of Australia in late January just before Covid hit. What a beautiful country and such nice people! Thanks again!

@michaelarigg 2 роки тому

My install went flawlessly, once I figured out how to get the Di2 unit into pairing mode (hold the button down until both lights flash). I updated the w111 unit first via E-TUBE app, and then used the E-TUBE app to update each component. Once the install shows 100%, you need to wait 30-45 seconds before the app comes back to tell you the update was completed successfully. There is a bit of a delay; wait for the confirmation. So it seems the software has been improved. “Happy Days!”

@timrichardson2 5 років тому

Shout of thanks out to Shane, after deciding to swap my Garmin Edge 800 for a new computer it was your reviews that sold me on the Wahoo Element Bolt, its arriving tomorrow and looking forward to getting stuck in. Thanks for the reviews and advice. Keep up the great work.

@RolandLoko 5 років тому

Same here, I bought my element bolt a year ago after watching Shane's review on it and I have been loving it sins :)

@MarkHSPR 5 років тому

Big thanks! I managed to brick my brand new bike in exactly the same way. Followed your instructions and, hey presto, all is good in the world again! Cheers for that.

@jeffreyvictor3678 4 роки тому

Shane...Thanks for another great video. I too had to retry and reconnect to Bluetooth two times before firmware update took place. After that, I went through everything like a hot knife through butter! I even was able to update my Garmin 1030 so I can scroll back and forth from page to page and see all my data as I ride! Thanks again!

@dwaynepedals 3 роки тому

Thanks for the video, Shane. I'm currently building a gravel bike around Di2 GRX and picked up an EW-WU111 ANT+ Bluetooth as well. Glad to take some instruction first hard from you on this.

@MichaelBlackMPI 3 роки тому

You are a lifesaver! I bought my Di2 Dura Ace equipped bike from Canyon online so when I bricked it, I didn't feel I could take it to my local store. I had all the problems you had with adding the EW-WU111, with the firmware, with the Bluetooth-LE connection, etc. Without your videos, I'd still be on a 1-speed! After having crashed during the firmware update and then restoring everything with a PC, I was unable to connect over Bluetooth-LE. I kept getting and error. But your tip about going into the settings on my phone and removing the EW-WU111 was great -- that fixed it. Everything connected and then it updated the firmware of my WE-WU111 and bingo. Finally I am connected to my Garmin. Wow, this was a lot harder than with SRAM. I have a Shimano bike and a SRAM bike and I've become a SRAM convert through this. (BTW, I did not need to do the step of disconnecting the Di2 battery to get the PC to talk to the system after the firmware debacle. It is a good thing because on my Canyon the battery is not in the seat tube but rather down in bottom bracket and not readily accessible.) Thanks so much!!

@marcsteiner5196 2 роки тому

Happy days:-) Just successfully completed Installation of the Wireless module inc. Firmware update. No issues at all after following your recommendations. Many thanks! Marc

@dougmclean2153 3 роки тому

I can't thank you enough for this video. Like many of your commenters I had exactly the same experience installing the wireless unit. It seems like bricking the bike should just be a step in Shimano's instruction sequence.

@RolandLoko 5 років тому

It's always a great pleasure watching your videos Thank you very much again, Shane, for making these informative contents I really appreciate it.

@CalebKerr 4 роки тому

Thanks so much - this helped a ton. I tried doing it without disconnecting my battery and it did brick everything. The battery for my Canyon Aeroad is in a super inconvenient place that requires taking the bottom bracket out to access, but luckily I was able to sneak some pliers in there and made it work without having to do major surgery. Thanks for the guidance!

@ElBuenSelvaje Рік тому

Hi Caleb, I ordered the EW-WU111 for my 2021 Canyon Aeroad but am a bit worried about the bricking issue... As you said, the battery is located in a terrible place, so having to unplug it would be very challenging . What's unclear to me is the following however: would it not be enough to just unplug the EW-WU111 unit from the system, and reconnect it as it initially was? (I am planning on placing it inside the cockpit instead of a EW-JC200 junction box I found there) Or does it really need to be the battery?

@gmcc9307 5 років тому

Keep the Di2 content coming, love it. Thanks

@doel1962 4 роки тому

Hi Shane, thanks a lot for your very clear video. I did the same installation. Experienced the same issue, but resolved it following your example. It is working as expected and is a great addition.

@rossmcquillan1013 3 роки тому

Thanks for the video, the firmware update (and total system failure) happened in exactly the same way for me. I followed your remedial steps and all is fine.

@SteenbergenPeter 2 роки тому

Thank you very much for the clear instruction. I did the update via the charger and laptop because I was afraid of the well-known error when you update wirelessly. Love you're video's so keep them coming .

@calvelo8456 4 роки тому

Congratulations on the baby!!!!🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

@jayjohnson7594 4 роки тому

Today I picked up my new bike from the local bike shop. Got the Ultegra R8070 groupset wit the ew-wu111 (in-line under the handlebar). After seeing this vid I got a little nervous about connecting and doing the ew-wu111 firmware update. So I decided to connect witht he e-tube program on a windows laptop first. All my components needed a firmware update (guess the LBS couldn't be bothered). I'm happy to report that the firmware of all components, including the ew-wu111, CAN be updated using the charging cable that comes with the R8070 groupset and the windows e-tube program (v3.4.3). Took 5 mins and 45 seconds and....happy days!!!

@bellabeemer4222 2 роки тому

Thanks for this video, it saved me a lot of hassle. Even in 2021 with a unit manufactured 19/01/21 I had the same issue apart from mine got to about 30% before it died and bricked my bike! I left it outside the bike whilst performing the update but it seemed to make no difference. Following the procedure here it's now all sorted and working. Phew!

@rasmuswi 5 років тому

I was SO happy that I hooked my complete DI2 system up before installing it on the bike. That way, that bricking happened with all the components just lying in a pile on my bed (yes, I built my bike in my apartment because it's the only place available) and it was quite easy to figure out that unplugging the battery from the rest of the system, and re-connecting it, un-bricked my system, and after that the unit actually seemed to have the new firmware version. Also I was hoping to see to play with the hood buttons and using them to flip between the screens on your Bolt and Garmin (that should work right out of the box) just because anything wireless is magic. :) Oh, and just for the hell of it, I would rename that EWWU111 to something else, like "Shanes Blue Flame" or whatever the number of available characters allow you to. That way it will be easier for you to know if it's your bike or Vons bike you're reprogramming. :)

@threeshirescyclist554 5 років тому

Following this closely and taking notes Shane, thank you for this. As before my Pro 0 disk arrives soon, and will be putting the same wifi on if required.

@jwfriar 5 років тому

Thanks about to do the same on my Roubaix Di2. Hoping it works better. Always enjoy hearing your “happy days” and then LOL’d even you said “wasn’t happy days at all”

@jwfriar 5 років тому

Read that changing the password could causing the bricking. I X’d out of that part leaving at 000000 and it worked. Also did the firmware update with the saddle out so the phone was lying on the Bluetooth unit. Anyway - worked well. I like using the hoods to flip between screens and seeing my gearing on the Bolt, so worth it for me. After all that and the money for the unit and extra cable, it’s really is kinda ridiculous that it isn’t just integrated. Kinda cheap/greedy of Shimano. And confusing with the naming conventions. Thanks again for the walk through - not sure I’d have been able to figure it out otherwise

@laareperatv 3 роки тому

Thank you for this video. Incredibly enough, I encountered exactly the same problems you did and managed to get them sorted based on your video. Thanks!!!

@thomasballard5948 5 років тому

Great video, ordered one for my new bike build. Hopefully going to arrive tomorrow, this helps!

@davidsmith4000 5 років тому

Thanks for the video - I had the same problem initially too. Definitely scary to lose the Di2 operation, even for just a short time. Hopefully Shimano can resolve this issue!

@LuisCruz-tx2vq 5 років тому

I had the same error it took me crazy a couple of days, finally after many times I could update the firmware and restart the system...

@jasontapping2192 5 років тому

Love this video - I have Ultegra DI2 and have wanted to add this since getting a Garmin 1000, now I’m going to push the button on getting it! Great work Shane, keep it up!

@mikedav13s 5 років тому

Hi Shane, I had the same issue with my initial install of the WiFi module in the seat tube i.e. dropped out at 10% of firmware update. Like you, unplugging everything and reconnecting fixed the issue. I have done several firmware updates on other components over Bluetooth with no issues. What is annoying, on the Elemnt Bolt is that the only way to see the Di2 battery level is to go into the sensor in the setup screen, no way that I can see to have the battery show on the ‘pages’ screen. Hopefully Wahoo will add that in a future update. What is cool is programming the hood buttons etc, pretty slick stuff.

@MarcelSoute 5 років тому

You could also place the unit in the top tube, where the di2 cable enters the frame. Never had any issue with connections but did wrap it in some foam because of the rattling.

@HeathDamienHuffman 8 місяців тому

I encountered the same issue and solution as you, so thank you very much for guiding me through this whole process!

@r0bv123 5 років тому

I had purchased the EW-WU111 when I was building up my bike last year and from what I recall, notes mentioned it would be recommended to install as close as possible to the head unit/computer. Distance does make a difference. With that in mind, I was able to locate the wires and unit internally on the downtube and have no issues updating/communicating on updates. Not sure if you have the time or patience to re-install it after playing/riding with it.

@javabk 4 роки тому

I went through the exact same process ! Including the errors and the fixes! Thanks for the video:)

@sanestflexican 4 роки тому

Did you guys still kept that config? the wireless unit on the seatpost? or due to connectivity ended up moving somewhere else on the bike? thanks for the video and comments

@loveandfaith05 3 роки тому

Thanks for this video. Made the process easy to install

@toddmeerdink4782 4 роки тому

This video was my go to guide for my install. Went down exactly the same way. Thanks!

@itsm3th3b33 3 роки тому

Todd Meerdink Same way including the firmware update error?

@john-okc450 2 роки тому

Thank You, I was unsure of parts needed and installation.

@BradleyInKona 5 років тому

Good stuff. Here's another way to get wireless connectivity for your Di2: Shimano's SC-MT800 display unit. It may not be a good fit for bikes with Di2 pre-installed (as far as the wiring goes) but I'm really pleased with all the functionality it packs for just $80 USD (on sale). It gives you Bluetooth and ANT+, a 3 port junction, charging port, and of course the display. Works with any modern eTube Di2 setup but does require the updated "Bluetooth" battery.

@log_it8282 3 роки тому

I simply replaced the EW-JC200 with the EW-WU111 at the stern. Perfect connection and updating without any bricking. If I had to install it in the seattube I would leave it outside till any updating is done.

@scottwatters4433 3 роки тому

Great video as is all your instructional content. Just one caveat. You might want to add that if you have connectivity issues with your head unit when the EW-WU111 is mounted in the seat tube, as I did with my 2021 Pinarello Prince, consider moving it closer to the cockpit. Luckily for me, the built-in ETUBE junction A box is in the downtube and I was able to install the wireless unit much closer to my Garmin Edge 530. Once safely stowed there, I had no connection issues and no more "beep" each time the unit would reconnect as it was when installed in the seat tube. Thanks again for all the great content.

@musicfan1181 3 роки тому

thanks for the video, experienced exactly the same issue and was resolved also by unplugging the battery.

@ridesofjapan 5 років тому

Kudos for whipping out the scale! ✊ I had the exact same thing happen when updating my BT unit... seem to be more of a rule than an exception unfortunately

@gplama 5 років тому

I’d happily carry the extra 2g of weight (as per spec of 5g) if it worked the first time when updating! 😂

@RixterNow 5 років тому

I love my Di2 except when it totally died at the 175km mark of my 315km ride and I had to ride home in my big ring. Somehow when I think of Di2 vs E-Tap, the old Mac vs PC commercials come to mind 🙄

@LeoInterHyenaem 5 років тому

@@RixterNow Agreed, as far as junction boxes and all that convoluted rubbish go, the Sram looks like a Mac compared to Shimano. But otherwise, they have too much in common compared to Mac vs PC. This looks much more like a PS: upload.wikimedia.org/wikipedia/commons/thumb/4/4d/Three_speed_shifter.JPG/220px-Three_speed_shifter.JPG (while this - more like a Mac: rotorbike.com/catalog/media/catalog/product/cache/1/thumbnail/9df78eab33525d08d6e5fb8d27136e95/s/0/s04-002-00000-f010.jpg )

@pauldamian2988 5 років тому

Lesson learned: try electronics before "buttoning things up". Pretty SOP, like in building a computer, or automotive electronics... Always make sure things work before putting everything back together and tidying all the wires up with zip ties. That said, THANKS a bunch for these introduction to electronic shifting. It's very interesting to learn about and practical as well, as I would imagine IF I ever buy a new bike, it mostly likely would come with this.

@MarcellangerCom 2 роки тому

Best video I saw so far from the installations !! 👍

@fepatton 3 роки тому

This is great! Just got my first Di2 video and really want to add this, as well as the button shifters from your other video. :-) Cheers!

@Bikers_NL 3 роки тому

i just bought a di2 8070 upgrade kit for my 2020 tcr pro ccc, and ordered also the ewwu111, as the firmware of this module still isn't renewed, i ran with open eyes in the same update issue you got back in the days of this video, only after disconnecting the module my di2 still was a single speed 😒, reconnecting the ewwu111 did the trick for me. usefull video Shane! it saves me a load of sweat buttocks 😎

@iainrossiter758 2 роки тому

It certainly took a while. Thanks so much for the video👌

@nicholaspine3344 5 років тому

Cheers Shane Thanks for the reviews and advice you helped me out great :)

@ihsangin5816 4 роки тому

Shane, this and the rest of the “Ewok” series of your videos were great help in getting mine installed configured. Just like yours, my configuration seem to have gone to a good start. Just after starting e-tube (iOS) app, it said it needs to apply an update without even asking for the default passkey and reported update was “successful”. Then it did not accept the pass key at all! I had to start the PC e-tube app, and was able to set my own pass key, and was also able to update the firmware via PC app. Then I was able to setup the Garmin head unit setup and the rest. One funny thing though, even though both iOS and PC apps see the crankset correctly, somehow it’s reported to Garmin head unit wrong (53-34). I’m hoping it will have reset to the correct crankset values in the morning when it has a chance to go to sleep and wake up for my morning ride. Thanks to your trials and tribbleulations ;), I didn’t lose my cool and was able to set the unit up. Thanks again.

@noman995 5 років тому

Hey Shane. I did the same upgrade about a month ago... But as I have the ultegra 6870 di2, I replaced the shifters to r8050 to get the hood buttons to shift the elemnt pages. Hooked it all up, nothing. Then had to get the upgraded battery, dn110. After that fine. Although the battery is completely discharging, even without being ridden, in about 2 weeks. I did a firmware update released last week for the wireless unit and battery which promises to improve battery usage, so let's see the outcome. Incidentally, I also tried out the ew 101 ( wireless unit with both cable ports on the same side and mounted on the seat stay) and it didn't interface with the wahoo, so I swapped for the in line ew111. Ultimately, a lot of expense for seemingly minor mods, but operating the wahoo without taking hands off the shifters has increased safety, I can see what gear I'm in from the wahoo, so don't need to look down at the cogs, I can upgrade firmware from the mobile app and it was a fun project.

@MrIvanPe 5 років тому

Just in case your life isn’t complicated enough already, this. I’m all for tech progress, but I can’t stand the faff that often comes along with it. Glad you can stand it, Shane. We all benefit from your insights.

@firemanhey 5 років тому

Looking at buying a new bike in the next while and probably be doing the same upgrade. I'm the same and haven't touched DI2. Looking forward to the next video.

@barryhambly7711 5 років тому

Very interesting Shane don't have it myself but been thinking about it !! The thing I think is very good for anyone training is to be able to see which gear they are in for climbs to make sure they are in the right one for effort . One thing I noticed your seat post must be nearly off the safe limit for height I would think

@blimseynoeyes 5 років тому

Great vid Shane thanks mate, I’ve updated my firmware and that’s as brave as I’ve got!

@andreadainese9010 4 роки тому

Thank you Shane for your always informative and thorough videos! I managed to get through the firmware update and bike computer pairing. Are you gonna make a video on semi-sync and sync gear shifting for Di2? I found the Shimano instructions not intuitive at all... Thanks much!

@IanB17 5 років тому

By the end of this series of videos I don’t think I’m gonna be able to resist buying a bike with Di2 😃

@gplama 5 років тому

Di2 is brilliant..... just get someone else to build it all up.

@IanB17 5 років тому

Shane Miller - GPLama If you were nearer I’d be asking you! 😂

@wubble666 5 років тому

DI2 is actually a easy build compared to mechanical. The trick is to lay everything out beforehand and make sure it all works. Then think through your build in terms of what access you will need around seat posts, bars, bottom bracket and stem. I would also suggest having one of the Park wire guide kits. It will save you hours and the $100's that will end up in the swear jar.

@IanB17 5 років тому

James Jordan Cheers 👍🏼

@caulonieseboy 5 років тому

Hi GPlama! Thanks for the video. I’m planning to upgrade my roadie from Dura Ace 9000 to Ultegra R8050. Can not wait!

@gplama 5 років тому

You'll love it. I was skeptical about going back to Ultegra.... from mechanical DA. But the Di2 is a whole new world of awesome.

@caulonieseboy 5 років тому

You’ve confirmed it. My waiting is now more of the ‘cannot’ variety. Thanks buddy.

@sambrown1779 5 років тому

Awesome stuff mate. Thanks

@jimknock Рік тому

I think that if the updates are performed BEFORE the EW-WU111 is placed back inside the frame the updates are more likely to be successful. The carbon fiber can be a bit of a shield. Also, keep the cell phone close to the EW-WU111.

@juanantoniomoreno9826 5 років тому

Thanks for sharing, and include the troubleshooting! :-)

@waltersjonathan 5 років тому

Thanks for the video Shane. Have you tried the sequential shift on the new Di2 yet? Thinking I need an upgrade of my older Di2.

@neilmartinez143 5 років тому

Great video and very helpful. You didn’t mention how exactly you solved the pairing issue with the D-Fly unit.

@VeloNippon 3 роки тому

Awesome instructional content as always even after two years of being cooked. Thank you very much Shane.

@triathlonsteve9675 5 років тому

Hi Shane , nice vid :) great to see you dealing with the tech stuff, I have di2 on both road bike and triathlon bike, I have not quite worked out how to adjust the gears fully, be great if you could do a vid on that 🚴‍♂️😊

@jimsigafoos8799 5 років тому

I'm enjoying the DI2 series. Looks like DI2 offers customization options not available in eTap. Wouldn't trade in my eTap though. It's clean looking and just works as is, and I can monitor gear selection and battery level on my Garmin head unit also.

@davidpainter304 3 роки тому

I watched this before adding the wireless unit. Install went ok and then connected to the E-TUBE app where the wireless unit needed an update. Update was successful but I had a bricked Di2 unit. Having a canyon with it’s less than accessible battery I decided first to turn off Bluetooth on my phone. Doing that the Di2 on the bike came back to life. Whew, as I didn’t really want to access the battery. Also, for the password you can just X out of the reset screen and it will stay all 0’s.

@jimhutchison8450 3 роки тому

Good video. I tried something different that worked perfectly. Just plug the PCE1 Windows USB interface directly into the EW-WU111 on the workbench before you put it on the bike or connect it to anything else. You can do all the firmware update and unit configuration with 0 danger of bricking your bike. After setup, then install the EW-WU111 on your bike and it works perfectly first time!

@grahamtricker4103 5 років тому

Don't forget carbon frames can be conductive and therefore may offer a level RF screening to the Di2 wireless module, which is probably why you had the problem. Best to place this module outside of the frame between the cables that go from the handlebars and the other Di2 components in the frame.

@tzed2509 3 роки тому

Excellent stuff, made the process a little less daunting for me, thanks!

@kevinalexander8419 5 років тому

My Cervelo S2 is currently in the shop getting DI2 and the bluetooth installed, I went for the Ultegra, excited to get it back. Disappointed though that the bluetooth unit didn't come as part of the groupset.

@jimlombardo9046 5 років тому

I made the same upgrade in July and love the Di2 with the wireless connection. Unfortunately everything I’ve read says not to try and use the Shimano wireless app as it’s terrible and will break your setup until you fix it with USB. Also, you need to use your celebrity status and get the different platforms to save and show shifting patterns!

@TomasHedlund16 5 років тому

I had the same issue as you when i installed mine and updated the firmware, system just crashed. But removing the battery and plugged it in again solved the issue so i think that it is a bug in the system right there. But after that everything has been happy days 👍

@szabiakanich 5 років тому

Firmware updates make me nervous. There's always that slight chance that something might go terribly wrong and something getting bricked. Good to see that you could get it back up and running again. Also noticed that you were shifting on the back and it wouldn't shift past the 9th sprocket in the back. I guess you were in the small ring in the front and the DI2 prevented you from cross chaining :) So cool that electronic shifting is looking out for your chain and drive train health overall :D

@minjin0259 5 років тому

Whenever using the Bluetooth to update anything, I would recommend not having the module buried inside of the bike, especially with a carbon frame. The carbon fiber is a natural barrier to radio signals and can cause the interruption that you experienced. If you check the signal strength with it in the seat tube and outside of the seat tube, my guess is that you will notice a marked improvement outside of the seat tube.

@KevinArmstrong4154 2 місяці тому

After hours of struggling, your advice to change to version 4.04 has connected, and is updating my components. Massive thanks for that and more coffee deserved. Pretty disgusting that Shimano make legacy software for Windows PC so difficult to find, cheers

@TLa08 5 років тому

I had the exact same problem as you :D Only I wasn't so lucky to get it going again. After borrowing a tablet (Android) I could get the firmware updated (Android versions of the app are different for phone and tablet) In my TCR (size L) I got signal drops with WU111-module connected to the 820. I've now put inside my handlebars and no more drops. Bit sad to see that the Wahoo doesn't display actual gear ratio like the Garmin (53-11 format), I really like this on my Garmin.

@vincentdufour9487 5 років тому

I recently bought the same exact bike. Will you do a video on the Giant Power pro power meter ? I would like to see if your understanding of is the same as mine. Your video about Di2 is interesting ! Thank you

@tobegan3753 3 роки тому

tissues had me in tears lol - great and informative video Shane :)

@Lilmain98842 5 років тому

This video is perfect timing. I just received my EW-WU111 today but I did not order the extra wire. Can I just remove the EW-JC200 and replace with the EW-WU111?

@MrEnlakesh 2 роки тому

High valuable video! thank you

@MrCenttaurus 5 років тому

Hello, thanks you for your help ! Great video !

@saroshhavewala1489 3 роки тому

I did the connection from the junction box, not my battery, which was on my down tube (Pinarello). Followed the steps, and yes it crashed my system; nothing on my di2 worked. I deleted the Etub app from my phone. Downloaded the Etub software from Shimano to my computer, plugged the charger to the junction box and the other end (USB) to my computer. Right away noticed the software indicated my di2 battery was dead. Charged the battery. Re-connected to computer and was able to do an update to a derailleur that was needed and change what the buttons on top of the hoods do (paging back and forth Garmin pages). Everything works great. Thinking something drained the battery which caused the issue of di2 not working. Also, having these preferences on the iPhone app is nice but for peace of mind, if you can, do the connection through a computer (or tablet) with the Etub software.

@VeloNippon 3 роки тому

I'm also Pina owner and can't decide where to install the wireless unit. How is the signal strength from inside the down tube? Any delays when using the top buttons? My second choice is hide the unit inside the aluminum stem which is apparently Di2 compatible.

@saroshhavewala1489 3 роки тому

@@VeloNippon The signal strength is great. I even wrapped the unit in bubble wrap so it's not banging against the down tube. Maybe .1 or .2 seconds delay using top buttons, nothing that's irritating. I only use buttons to page through Garmin pages.

@jamesvaughan7274 5 років тому

The connection problem you had is pretty common. I concluded on the few times I've done it that it was due to the changing of the pin on first use. How it's implemented by Shimano is poor I think, but without any feedback from the device hard to do securely. I'd recommend not inserting in the bike on first install - do it inline with something like the rear mech so it's accessible; get the communications working (so pin change, delete pairing etc), then update and test before installing in the final location. The other option is to install inside the handlebar - upstream of the bar end interface. When you come to changing the wiring to remove that ugly junction box you should pass some heat shrink over the cable and rear brake hose to group the cables together on the left of the head tube. You can get a really clean look with a bit of patience. The other thing you can try is tagging the ends of each cable with a strip of coloured electrical tape - that'll let you determine which is the rear, front, battery etc when you're working in the confined areas like the bottom bracket.

@gplama 5 років тому

All brilliant tips. Many thanks. When I'm done it'll be all pretty sweet. And likely time to upgrade again! haha :)

@InstituteofDesign 5 років тому

Now you have me wanting to get Di2.... and/or a new bike. This channel is getting expensive for me :-) Also love the new bike.. I presume it comes with Giants Power Pro? Would love to see a review of that if it did. With bike manufacturers including power meters with their bikes it is going to be very interesting to see what that does to the market. I imagine it has to drive the price down which is only good for consumers.

@gplama 5 років тому

Every ride still feels like new bike day, so I'm loving it. As for the Power Pro...... hmm..... I've sent some data over to Giant for review. More on that once I have more detail of what's going on... or if I have a dodgy unit. I'm hoping for the latter. It has taken a while but we're finally seeing power meters on a lot of bikes off the shop floor.

@tekesbur 5 років тому

@@gplama I purchased the exact same bike and now have about 500mi on it. I have Quarq DFour on my other bike and I haven't noticed any major difference in climbs that I make. There's an area near me with 30min+ climbs and will see how stable power readings when I ride there in a few months or sooner. I have to say this bike is the best damn value in the bike market now. For five grand you get a legit frame, legit wheelset, Di2, and disc brakes. I am planning to replace the handlebars since they are too wide (44 vs 42mm on my old bike) Funny they don't tell you that on the website. I replaced the stock tires with Spesh SW turbo cotton clinchers after I had sidewall cut in the rear wheel third ride. I was disappointed but understand it was just bad luck. Maybe I'll give tubeless another try (GP5ks) next time around. I have to say the way turbo cottons roll is incredible. Also not a big fan on the stock bartape but it's just a minor annoyance at this point. Btw I love your videos, I had ordered the D-fly unit and the cable last week and they probably arrived today. So this video will be super helpful while i'm putting it on. Keep up the good work!

@koenvandensteen4180 5 років тому

@@gplama Does the Wahoo Elemnt show the battery level of the Di2 system? What useful info does it show (besides gear ratio etc)? I have the Elemnt and I am considering the wireless upgrade, but it seems to me that the only thing I could use it for is to cycle between pages? Good review btw.

@gplama 5 років тому

@@koenvandensteen4180 It shows it under the device pairing/settings on the Elemnt & Bolt, but it's not a field to select and show on screen (yet).

@MUNDY2023 4 роки тому

Thanks video was useful. I had the same problem with a Canyon bike but it was not possible to disconnect the battery (as in the downtube). Etube app was missing front and rear derailleurs after the EW-WU111 crash. After lots of head scratching, I disconnected the wires into the front and rear derailleurs for a minute and reconnected, hey presto then appeared in the etube app - all sorted.

@anderssundberg9490 2 роки тому

Hi. Thinking of mount a ew-wu111 on my new Canyon. As you say the battery is in the down tube, difficult to access. So where did you place the ew-wu111? BR Anders

@changrenyong7616 5 років тому

The exact same thing happened to me as well when I tried to update the firmware of EW-WU111 via BT using the E-TUBE iOS app. Unfortunately for me, I wasn't able to disconnect the wireless module because it was hidden in the handle bar and I didn't want to remove the bar tape just to get to the wireless module! I ended up borrowing a SM-PCE1 from a friend and rolled back the failed firmware update. After successfully rolling back the firmware update, I proceeded to update the firmware using the E-TUBE PC app (via the Di2 batter charger). I will NEVER update the firmware on the wireless module wirelessly again.

@kkkwwwaaakkk 5 років тому

Patiently waiting for when I can work on my bike in shorts again

@bradallen8643 5 років тому

Thanx Shane, excellent vid. Same thing happened when I updated the firmware after installing the unit in the seat tube. I think there is a firmware glitch in having to change the default passcode before you update the firmware. I think the firmware gets confused about which code has been logged in so you have to reboot using the changed code. Can’t wait until your next vid to show how to configure data fields on Garmin 1030. I can’t see how to change shift mode ... mine stuck on Manual and pressing button on Junction Box only toggles between wireless mode (flashing red/green) and adjustment mode (solid red)

@gplama 5 років тому

Yep, changing the code is what screws it. I should have left it default for the update and changed it after. You can change gear shift modes on the 1030 under the Di2 sensor options.

@jasonsimpson4805 5 років тому

Great review of the setup! Definitely doesn't appear to be fully plug n play just yet...

@robpurbrick1 5 років тому

Shane, as other have mentioned fitting the wireless unit outside of frame upfront gives perfect connection for me on the Wahoo Element and don't notice any lag when on gear display . My only frustration is that the Di2 battery level can only be viewed by accessing set up menu on Elemnent head unit itself (short press on power button) . For some reason Wahoo removed the ability to display on the main page like you can on the Garmin.

@Lilmain98842 5 років тому

I just received my EW-WU111 today but I did not order the extra wire. Can I just remove the EW-JC200 and replace with the EW-WU111?

@robpurbrick1 5 років тому

@@Lilmain98842 Yes that should work fine

@Lilmain98842 5 років тому

@@robpurbrick1Thanks for the advice. I got it to work after bricking a couple times. Save me from buying the additional wire.

@bungle2k 5 років тому

Great piece of kit, took mine off As the battery would only last a week when fully charged, was thinking of putting the older version back on as the battery life is a he'll of a lot long, but still lose quite a bit of overall battery life

@gplama 5 років тому

Something is wrong. Make sure all firmware is updated and the eTube app is closed once you're done programming/checking it.

@Gallyga 3 роки тому

Regarding Torque listed on bike, my LBS told me that is a maximum torque, not what you should set it at. I always used to treat it as the required torque and set it to that with my torque wrench, but then the collar around the seatpost snapped...

@ed6012 5 років тому

Besides the EW-WU111, the internal seatpost battery (Di2 BT-DN1110) also has bluetooth functionality. Strangely, Shimano recommends not to update the firmware via bluetooth, but via the PC software with wired connection.

@veloxsouth 5 років тому

May be confirmation bias but this video makes me happy I chose SRAM eTap. Glad you got it working.

@robnolte2547 4 роки тому

Thanks for the video! I hope shimano is paying you royalties for the tech support video ;)

@gplama 4 роки тому

I'm not on the Christmas card list of Shimano. Their security flaws with Di2 and their poor excuse for a power meter have me shitlisted. Although these videos do well and UKposts ad revenue from them isn't bad.

@robnolte2547 4 роки тому

Shane Miller - GPLama your reviews are valid though. So sadly instead of pushing you out they should be trying to address the problem and maybe Leverage your venue to spread the word on correction to their shortfalls. Given they don’t seem to be addressing their bugs at the least that means more ad revenue to come ;)

@zwiftrogue3938 5 років тому

New toys I can't afford. Shame on you teasing me with all this. ;D Just kidding, so glad you are here putting out all this content.

@zakkaragkounis9944 5 років тому

Here is my story with this D-fly unit. I installed it today , had the same issue with the update stuck on 10% and the error message. So i did what you have done but in my case didn't work. my battery wasn't responding. We have tried other battery and was all good. But what happen to my battery? Connected to pc and after while and slowly the system recognized everything did an update to the battery and back again live. Then put the D-fly again and Happy days. But really why we have to go through all these , Shimano.

@matthewdouglas1726 3 роки тому

Amazing video

@wubble666 5 років тому

In regards to battery. For some reason, Wahoo cannot seem to get a battery level displayed on the screen for the element and you have to go into the main menu page and hit 'more' on the Di2 sensor. They have said that they are working on it.

@leedixon2113 4 роки тому

Thanks Shane, great video. Are the DI2 fields that can be added to the head unit the same regardless of brand? it's just I noticed you added far more fields to the Garmin unit, is this because the Garmin supports DI2 better? Thanks

@gplama 4 роки тому

Garmin has the most fields relating to Di2/battery/status/etc.

@leedixon2113 4 роки тому

@@gplama That's good to know, thanks.

@bradsburgess4806 5 років тому

Your the Best!

@3vil8unny 10 місяців тому

yeah seems like a better idea to update before you first put it back,, just like a pc case you dont close the sides till you see a good boot. but great video thank you