Not only is it quiet, it's also very hard to miss your target when the end of the barrel is mere inches away from it!

Matt, a man of culture, delivering on his people's wishes!

Remember, with the Erector 69 you need to make sure you have permits for multiple States because the moment you point that thing you will probably cross multiple Borders. If after shooting no bullet exits the barrel, it does not necessarily mean a misfire, do not watch down the barrel remember that it takes the Bullet some time before it reaches the end of the barrel (a bullet only travels at around the speed of sound after all). Sometime a bullet might not come out at all since it probably gets lost on the way!

I love the thought that you avoid detection with super silent shots, then instantly give away your position when you unscrew the suppressor. Squeeeeeek.

The irony of a suppressor being almost silent but enemies hearing you attach it from half a mile away.

There is no war in bah sing se.

Took an unintentional break from your videos, 1 year later, its still like the first time i saw you. Magical.

This is by far the episode that made me laugh the hardest since I started watching 5 years ago, squeaky screwing and all. Thanks, Matt!

I love how Matt always says “Place your bets in the comments below!” like he expects us to do it, but no one ever does. Matt, this is for you. I bet that the suppressor doesn’t break.

5ft of suppressor finally gets you the quiet levels that the movies try to make you believe they give you!

The awkward silences and smiles are the cherry on top. Good shit.

I kept hoping Matt would prop-up the suppressors, level them (perhaps with a tripod or something), and see how accurate and quiet they could be manipulated to shoot.

Should have had a decibel meter to compare noise levels as each section was added!

That beginning setup just so you can use "glockamole" was a thing of pure beauty

Those segments do a pretty good job at suppressing the pops. Thanks for sharing, Matt. The only negative thing to that system is that ear-splitting/fingernails-raking-across-a-chalkboard screechy sound that happens when the segments screw together. A bit of pre-lubing of the segment's threads should be fine at silencing that noise during the suppressor's screwing-together process.

I love how Matt is always smiling, always makes me smile!

The good thing about this suppressor is that you can't miss. It's so long that it's practically in the enemy's face. Quiet _and_ accurate!

Impressive that you can miss with the barrel physically touching the target.

Came back to watch this again. 2:35 is just... spectacular.

I don’t know what’s better, coming around the tree and and only seeing a suppressor that keeps coming, or you blowing the smoke off the end. All stupid and glorious, it brought a tear to my eye

I saw this suggestion in a previous video and I thought “man I hope he tries that”. Matt never disappoints

If you permanently attach enough of those sections to bring the barrel up to 16" you don't have to worry about the ATF's new pistol brace rule and you can just put a stock on it

I think it would have been interesting if you had a decibel meter as you fired through each new section to see if each baffle reduced the sound and by how much.

ok....long time watcher, moderate commenter.... but this is AWESOME!!!!!! i really want this product, especially the 9mm lol. Matt.....dude.....your inability to keep this Pg-13 makes it even more freaking hilarious!!! keep up the good work. I hope youtube is compensating you generously for all this content. I love you

The fact that everyone on the set was laughing is priceless 😂

You should have gotten a decibel reader to see if the additional suppressors actually made it even quieter

Wow, you sure have a long one! I hope it's fully functional. They all droop when they're too long. If yours is bigger I wanna see it. I don't think the extra baffles made it much quieter. I wish you had checked the velocity at the same time. Nice to see you. Good video. Pax.

this is the only channel where iv been a fan for over 10 years

Matt went from wholesome UKpostsr when he first started and now over the past couple of years has shown the real side of his humor. 😂

If you rested the supressor on a flat surface (like a long table) it should eliminate the curve in the suppressor.

I love the eye contact with the squeaking. You had me laughing, so freaking hard.

Good on keeping it classy my guy. Love it.

12:35 Imagine you're behind enemy lines, its all quiet, the enemy is waiting for you to make noise, and you had to put on your suppressors that sound like that lol

I personally would of liked to have seen a Db meter to see the diminishing returns on using a smaller one vs a longer one. Great VId Matt!

This was the most hilarious of your videos I've seen!! 🤣🤣🤣

Bro was definitely in the mood recording this

It's so efficient, it actually absorbs ambient sounds.

Q has a sense of humor. They definitely sent the right number of suppressor segments for suppression and to prevent deviation from the suppressor slumping.

the boyyoing you did was on points i laughed so hard keep up the great work on these 🔥videos

12:46 the funniest thing matt has done in a long time😂😂😂

I want to see the bloopers, from this 1. Especially the part where Matt is trying to describe what their doing and keeping it clean. Also, hearing the giggles and laughing, from off camera, makes it funnier.

This is the Demolition Ranch I miss, the crazy experiments and shotgun craziness.

I saw the comment and genuinely wanted to see you do this so bad I’m so glad you did it

Gotta double up on ear-pro when screwing them together 😂

Matt -a grown ass man who is genuinely smart and highly educated- not being able to keep from laughing and making peepee jokes is the funniest thing I've seen all day! Love it!

If you load up the first couple of cartridges in each magazine with the little blue pills (Viagra) replacing the normal bullets it will fix your drooping problem. Just be aware that continuing to shoot it for periods longer than 4 hours may pose a serious risk and you should consult a Gunsmith.

Every single time you put on more baffles I could feel my bones shivering 😖

Bro that quietness of the 9MM is mad wildddd 😂😂😂 dope

I cannot believe that you went through all that and didn't shoot a single 22 sub. Can you imagine how quiet that would have been?

I've been watching this channel since before Microwave Mondays (If you know you know), and this has to be one of the funniest episodes I've ever watched. To see you go from "I don't want to get demonetized" to "Eff it" is fabulous.

perfect CQB. need to make sure your elbow is not sticking out, so your silhouette is as compact as possible, while operating with a compact SMG, properly suppressed for a stealth operation.

LOL, I thought the thumbnail was photoshopped clickbait 😀2:18, 2:33, 2:52, 3:02 😂😂😂 Dude, you're hilarious, what a legend, love your positive energy :) Subscribed!

One could say it's "baffling" how the extremely long suppressors didn't just explode.

Props to the camera man for maintaining composure for so long. I don't know how he did it

I would like to hear the guns with NO suppressor, to compare with the sound made with suppressors installed. I also recommend getting a couple, maybe 3 microphone stands that can support the long suppressor assemblies at the far end, and in the center to minimize baffle strikes and shaving. If target shooting, using one stand in the middle will steady the aim, as well as keep the baffles on axis with the bullets.

U need to 3d print supports for the suppressor or something to stop the droop

I love that at 19:30 it managed to catch a very cinematographic failure to eject

I think the reason you only got the baffle strike while holding it is cause when it was tied down, the barrel wasn't swaying. However, when you held it, natural slight bodily movements happened causing the suppressor to sway while the bullet was shooting causing the baffle to get struck. This would actually be a pretty cool idea to completely silence a .50 bmg if you had supports to keep the suppressor from swaying.

Bro, The Glockamoly joke had me pissen... Matt, you are something else my dude.

The ending, the last few seconds..you got me lmao

We've grown old and gray together Matt and you still always manage to get an authentic, jolly, belly laugh out of me every video. Thanks for that. Truly.

Matt has finally achieved movie and video game suppressor noise level in IRL with the subsonic 9mm

10:06 reminds me of shooting as a kid. We were reckless growing up dumped a clip into a gravel pile infront of us. Heard the sounds of the bullets wizzing by, a few to be exact. I’ve learned gun safety as I got back into guns. Man how dumb I was as a 12 year old. I don’t blame myself I blame who took us out. Have fun be safe and keep shooting! I’m just getting back in and I’m freaking hooked. Now I gotta catch up on what I missed here hahaha

I love how it litterally wobbles and jiggles when firing

The amount of supressor length is absolutely BAFFLING 😂

Imagine being on guard duty at your base and you hear a loud screeching sound, looking to your right and seeing special forces putting suppressors on their guns while looking at you

The ending is absolutely hilarious 😂😂😂

This reminds me of something I heard as a kid…” science rules” thanks for the vid. You make a better Matt than a window thanks for sure!

I can appreciate this silencer company's self-awareness.

Love the glockamolie. I have watched Matt’s videos for a couple of years now. His ability to keep the teenager alive in all of us is an amazing talent. The combination of science and shinanigans is priceless! He deserves his success!!

Thanks for the excellent video, I really needed a laugh today.

lol the look at the camera as the 9mm suppressor is just squeaking away. I can just see a skit where Matt gets into place for a silent kill (assassination) with his suppressor, making sure to move silently, only to then have the suppressor give him away as he assembles 🤣

This is the kind of content that brought me to the channel originally. More of this madness, please!

Matt, delivering good, wholesome family content like always. Really just a man for the people.

Holy shit i got got by that intro pun. Well done Matt.

You should do a follow up video with the worlds longest oil filter and compare!!

Can we just appreciate the creativity that goes into all of those intros.

Scenario: You’re the lone survivor of your platoon. You’ve managed to find hiding behind enemy lines with enemy soldiers no more than 30 feet in any direction, and you know your only chance to make it home is with stealth and absolute silence. Your shots will definitely alert the surrounding 30 enemy soldiers. But you remember your Q silencer. It’s meant to be - silence is your plan to slowly eliminate them all 1 by 1. You’re ready. Your family runs through your head. Be silent, be still. Aim true. You begin attaching your silencer… 14:51

Remarkable weapon for the battlefield. You enemy does not hear a thing, but bullets impacting left and right of them without anyone ever gets hit, driving them slowly but surly insane.

your sense of humor makes me laugh and just put a like and hope to neet you one day 😂❤

The look on my dog's face while Matt was putting the squeaky sections on was priceless!

I’d be curious to see what happens to bullet velocity if measured with a chronograph as the suppressor gets longer and longer

The small compilation video of the suppressor was so funny😂😂

Im baffled by these results!

The 9mm suppressor squeaks are like the sound your school chair makes when your teacher says to be quiet.

I’d love to see a full auto run through one of these huge suppressors! Quality content as usual, keep it up man!

Great vid. Thanks for trying this.. 😂 the cringe of me and the hubby when you were adding them on esp. The 9mm.😂😂 *boing*

15:08 "don't look away from me" had me dieing

Would've been interesting to have a noise meter close to the suppressor to see how much quiter it got with more thingies attached

By far, some of the best content on UKposts. Thanks, Matt!

Shooting from a rest - no problem. Handheld, the rifle is moving, and so is the end of the suppressor. If it's vibrating when you pull the trigger, of course you'll get a baffle strike. If you shot from a tripod or shooting sticks, and waited for the suppressor to stop oscillating, you'd probably avoid a strike even handheld. Also - there's this magical substance called "oil" - you should acquaint yourself with it so your fillings don't hurt and your eardrums don't leave you in the middle of the night. Although you CLEARLY enjoy the pain of listening. Finally - suppressor test; dB meter needed. How quiet was it????? It's a real testimonial to the quality of their machining that you can maintain linearity over that long a stretch. Nice product. I shudder to think of having to get all those suppressors past ATF and NFA nonsense - the people who think it's OK to play with people's hearing, with no earthly reason except that tyranny says they can.

Action + Comedy + Silliness = Great Video

That was the most gloriously long and elaborate setup to a dad joke I’ve ever seen!! You are truly the king!!

I was totally expecting you to use a decibel meter and record how much quieter it got each extra segment lol

Welp, it's not the longest anymore

dude, youre hilarious..and give some great insight. awesome video

I love how Matt is behind cover but cameraman just points the camera over the cover haha. Obviously it's safe, cameramen always survive

The shot at 19:05 may be the single funniest angle I have ever seen on UKposts. Props to you and your camera man for the best ab workout of 2022

imagine you are in a fight and someone pulls up with this 19:05 i would bust out laughtin

"I burned the GLOCK-anoli" That was quite a lot of work for just a throw away "dad" joke! And I appreciate your hard work!