SHOOTOUT Ultrasonic Cleaner Filled With Pine-Sol Vs. a Pine-Sol Soak to Clean Carburetor Parts

3 місяці тому

I recently did a shootout video comparing Pine-Sol to Purple Power. Bothe performed well as an automotive parts soak but Pine-Sole was easier on metals like aluminum. The Pine-Sol carburetor soak is a proven carb cleaning technique documented by many other creators BUT I wanted to see how it compared to an ultrasonic cleaner filled with Pine-sol.
Affiliate links to items in this video:
Amazon link to Ultrasonic Cleaner
amzn.to/3HoeQLJ
Walmart link to Ultrasonic Cleaner
walmrt.us/490SJH0
When you click on links to various merchants on this site and make a purchase, this can result in this creator earning a commission.

КОМЕНТАРІ: 61

@patrickbeaumier8616 3 місяці тому

Really like the “No effort” part of the job. Thanks for the comparison. 👍👍

@dazecars 3 місяці тому

Thanks for watching!

@BobSmith-mc7uq 3 місяці тому

Might try diluting the Pine sol by 50% to water & putting the throttle bodies into a Ziploc baggy then add the Pine sol. Put this in the ultrasonic cleaner and add water to the tank. The ultrasonic action will work inside the baggy. Saves on Pine sol & cleaning the tank.

@dazecars 3 місяці тому

makes sense but the Pine-Sol was not expensive. I can see it as a way to keep the solution cleaner longer.

@andyb7754 3 місяці тому

I've got two ultra sonic cleaners (1 for west coast, 1 for upper mid-west). We use them a lot in aircraft engine repair. I didn't know about the Pine-Sol, (will be trying that) thank you very much for the informational video.

@dazecars 3 місяці тому

glad I could help

@user-nn3ii1ct7k 3 місяці тому

Crazy. Who knew 💕💕💕💕

@dazecars 3 місяці тому

I know I was shocked

@aguycalledlucas 3 місяці тому

In recently got an ultrasonic cleaner and I love it. I haven’t used pinesol for aluminum but I will try it.

@dazecars 3 місяці тому

I was shocked how well it worked

@alliered13 3 місяці тому

I’ve never tried it but always wondered about putting a little air line down at the bottom of the bucket and bubbling air up through the fluid as an agitator. Thank you for your videos.

@dazecars 3 місяці тому

that may work as an agitator OR it may create a barrier between the part and the solution as air bubbles tend to stick on the side of submerged parts. The other issue would be foam. Most "soaps" are going to produce an excessive amount of foam. A solvent like mineral sprites probably won't foam but then we are adding air to a flammable liquid... probably not a good idea 😁

@joell439 3 місяці тому

Great demonstration. I'm definitely sold on the Pine-Sol effectiveness on aluminum. Thank You Mr Daze! I have never spent enough time to validate the following..... but the internet cautions that you can damage the ultrasonic drivers if the tank liquid level is not full. YMMV "Steve's small engine saloon" did a series of YT videos on the ultrasonic cleaner when he got one. Also very interesting results.

@dazecars 3 місяці тому

yes that is true. It need to be 2/3 full or more so either put clean dummy parts to displace the fluid or add more fluid.

@bryancondrey6457 3 місяці тому

I suggest using both methods. Soak for a day to help loosen the crud and then run the ultrasonic for an hour or so. Then go to your medicine cabinet and grab your old toothbrush (probably needs changing anyway) to finish off anything stubborn. Thanks for the time you invested making this comparison.

@dazecars 3 місяці тому

I agree. the part that soaked for 24 hours first didn't need much ultrasonic to finish it out.

@osimnod 24 дні тому

Perfect timing for this comparison as I just purchased the 10L Creworks ultrasonic cleaner for use on my motorcycle carburetors. Paid about $120 on Amazon (didn't know about your channel, sorry). Looking forward to using it with Pine-Sol. Thanks for the informative video.

@dazecars 24 дні тому

Glad I could help! Make sure you check out my video on pine-sol and how it can etch some metals. It is not a super aggressive etch but important to know as a verity of metals are used for carburetors. ukposts.info/have/v-deo/cZ50dZB4bX6FyYk.html

@davelowets 11 днів тому

I have the same 10L Creeworks model, and I use Pine-Sol in mine all the time for carbs... 👍

@dazecars 11 днів тому

I was amazed how well it worked. Have you experimented with mixing water with the pine-sol? I have heard 50/50 is actually better but have not needed to clean anything to test it.

@pauljefferies9087 3 місяці тому

Pine sol leaves a thin film of varnish like material when used. It would undoubtedly leave that film on the carb and interior passageways of the carb. What effect would that thin varnish like substance have upon The carb?

@dazecars 3 місяці тому

I have done quite a few tests with pine sol and there was no varnish at all, no film, no residue, nothing but clean metal. If it was an issue in the past it is not an issue now.

@Dwigt_Rortugal 4 дні тому

I'm pining for an ultrasonic cleaner, but the pine-sol soak will have to do for now. "Like a Carolina pine forest!" I wonder if one of those smells different than a white pine forest.

@dazecars 4 дні тому

I think pine is pine when it comes to smell 😂😂

@TheGrizzlyGarage 3 місяці тому

Just a heads up, you are supposed to fill the resevoir up to the fill line (right above the basket) failure to do so will result in your Ultrasonic Cleaner blowing up. This is according to the user manual.

@dazecars 3 місяці тому

good point

@williamsantiago7303 2 місяці тому

There's nothing in the description. What's the name of this unit so i can look it up in Amazon.

@dazecars 2 місяці тому

I checked and it IS in the description, not sure why it's not coming up for you. Here are a few links Amazon link to Ultrasonic Cleaner amzn.to/3HoeQLJ Walmart link to Ultrasonic Cleaner walmrt.us/490SJH0 Let me know if I can be of any further assistance

@peanutbutterisfu Місяць тому

I have the $60 ultrasonic cleaner from harbor freight I use at my shop to clean engine parts. I tried a bunch of the cheaper cleaners and the absolute best was “Awesome” cleaner I think they sell it at the dollar store. I should make a video but without any scrubbing I put an internal aluminum engine part with that baked on bronze color staining and in 5 minutes it looked like new.

@dazecars Місяць тому

Thanks for sharing

@DocHoliday-to6kp 16 днів тому

And as we know it is the small tiny orifices that we cant see into that affect carb performance the most. Seems like Ultrasonic is the way to go.

@dazecars 16 днів тому

agreed!!!

@thegreatchickenoverlord5976 3 місяці тому

Does the pine sol evaporate off or leave residue or cause corrosion if not washed?

@dazecars 3 місяці тому

You MUST rinse it off. It is soap not a solvent like break clean

@steadyeddie7453 Місяць тому

Agitation and heat are key. Same goes for Evaporust. The ultrasonic cleaner is great for removing grease and cleaning out carb passages and orifices. But if you want the body and venturies to look "next level" purchase a decent hand held soda blaster and blast the carb body. It will remove the oxidation and leave a great finish. The soda completely washes away with water so your not clogging passages or orifices again.

@dazecars Місяць тому

good point

@NathanNostaw 3 місяці тому

Maybe try a smaller tub with the part and solution sitting in the US cleaner with water to save the volume needed. Impressive results on the cleaning though.

@dazecars 3 місяці тому

That is a good idea. A simpler solution might be "a dummy part", something already clean sitting next to the carb body to displace the extra fluid volume needed.

@NathanNostaw 3 місяці тому

@@dazecars or a big jar full of water

@dazecars 3 місяці тому

👍

@tommypugh1208 3 місяці тому

I don't know if you your still messing with treadmill motors or not but I have one on my homemade Mill an when I turn it down on low it like pulsates do you know what would cause it to do that?

@dazecars 3 місяці тому

sounds like you have the cheap longer skinny SCR not the good one I recommend in all my videos

@tommypugh1208 3 місяці тому

No I bought the good one I even put a choke an a farite ring also had to change the potentiometer I put 2 on it like you showed to get the fine feed

@dazecars 3 місяці тому

As a test try running it without the choke. Don't run it long term this way just to see if that eliminates the problem. Have you added a capacitor to the system?

@tommypugh1208 3 місяці тому

No I haven't. Should I?

@dazecars 3 місяці тому

no but they can cause pulsing thats why I asked. It may be easier for you to contact me through my website so you can email me pix so I can see if there is something that jumps out at me.

@Neilywop 3 місяці тому

Did you try the heat function? If so did it make a difference? Thank you for the video.

@dazecars 3 місяці тому

no. not yet. I know it will maket it even better but have not had the opportunity to use that function yet.

@X-22CamRS-SS-RS Місяць тому

Thanks for the video. Point being is that ultrasonic cleaners are worth it. If you have to spend that much time on the outside of the carb to get it cleaned, just thing of all the ports and everything inside the carb that you cannot scrub. Carb might look good but you may never completely clean it to make it work properly.

@dazecars Місяць тому

Great point!

@weegaz22 27 днів тому

Thats a pretty viscous looking liquid, try it with 50% water next time and heat the water, The lower the viscosity, the more cavitation effect present. Fluids with higher viscosity are sluggish and do not react quickly enough to form cavitation bubbles and the reduces the subsequent implosion effect, which is how they work, a side benefit is it'll also mean you can clean more for your $ as it'll go twice as far. might even be able to go 33% pinesol to 67% water. I used to use one of these for fire and flood restoration work back in 1998 when they were pricey pieces of equipment back then.

@dazecars 27 днів тому

Thanks for the tip! I have been toying with diluting the pine sole for $ savings and actually because some detergents need some water for the soap and grime to bind to but I had not thought about the viscosity. For this shootout I needed to do a 1:1 comparison and the "internet wisdom" was to soak the carb body in 100% pine sol so the ultrasonic test needed to be the same. Thanks for the comment, I really appreciate it.

@brandonrohrer7914 3 місяці тому

Please try tide detergent

@aguycalledlucas 3 місяці тому

I was told by bran sonic tech support that you don’t want to use detergents that are not made specially for US cleaning because they foam up and keep the US from cavitation.

@dazecars 3 місяці тому

Because you have used it and it's a good carb dip or because you want me to find out if it would work at all?