Hi-Tech 3DP Ti Derailleur Hangers for Precision Shifting

2 місяці тому

Upgrade Your Ride with SILCA's 3D Printed Titanium Derailleur Hangers!
Looking to enhance your bike's performance? Josh, your go-to guy for all things cycling, here to introduce SILCA's revolutionary 3D Printed Titanium Derailleur Hangers! Say goodbye to subpar shifting and hello to precision-engineered perfection.
🔍 Find Your Derailleur Hanger to fit Your Ride!
Not sure which derailleur hanger fits your Year/Make/Model Thru-Axle Bike? No worries! Head over to our website calculator to match up with your ride: silca.cc/collections/deraille...
🔧 Superior Performance, Guaranteed
What makes SILCA's titanium hangers stand out? Let's break it down:
• Up to 12x Stiffer
• Lightweight
• Improved Shifting - Experience quicker, more precise gear changes.
• Durability: Reduced risk of mis-alignments, even after crashes.
• Frame Protection: Our designed fracture notch sacrifices the hanger, not your frame, under the toughest impacts.
🏁 Race-Proven Reliability
Already trusted by pros at the World Tour level, SILCA's 3D Printed Titanium Derailleur Hangers powered two stage wins in the 2023 Tour de France! Keep your derailleur aligned and your ride smooth, no matter what the road throws your way.
🔨 Easy to Install, Built to Last
Designed for hassle-free alignment and crafted with advanced 3D modeling, SILCA's hangers are engineered for excellence. Plus, our internal fracture notch ensures your frame stays safe, even during the most demanding rides.
Carbon Frame repair: Ruckus Composites
ruckuscomp.com/
👕 Get the Look
Love Josh's iconic team van blue shirt? Snag yours today and show off your style: silca.cc/collections/shirts/p...
Don't settle for subpar shifting - upgrade to SILCA's 3D Printed Titanium Derailleur Hangers and transform your ride today! 🚴‍♂️💨
Like the product videos? Please consider subscribing to the SILCA Velo channel - which helps Josh and the team to bring you better, and more informational content to you in the future.
#SILCA #3DPrinting #Titanium #DerailleurHanger #silcapursuitofperfection
▬▬▬▬ Follow for more ▬▬▬▬
SILCA website: silca.cc/
SILCA blog: silca.cc/blogs/silca
Instagram: / silca_velo
Facebook: / silcavelo
LinkedIn: / silca-velo
▬▬▬▬ ABOUT SILCA ▬▬▬▬
Founded in Milan in 1917 and now based in Indianapolis, SILCA is renowned for its passion for cycling. Led by cycling industry leader, Josh Poertner, the brand has expanded from the iconic SuperPista pump to a full range of high-end cycling tools and gear, collaborating with UCI World Tour teams to enhance cycling performance. SILCA combines tradition with innovation, inspiring cyclists to enjoy both riding and maintenance.
▬▬▬▬▬ Credits ▬▬▬▬▬
Created by SILCA
© SILCA

КОМЕНТАРІ: 176

@minimedic7749 2 місяці тому

New to cycling last year and so thankful I stumbled upon your brand and channel. Now have a handful of your products and a happy user of waxed chain now. Love it. Been intrigued by these so glad you did video explaining it. And now I know im no world tour rider and never will be. But ordered one of these truly to continue supporting your brand and the marginal benefits it provides. hooray for quick and quiet shifting. Thank you for all you do for the cycling community.

@SILCAVelo 2 місяці тому

Thanks so much for the kind words!

@mortigard 2 місяці тому

Not gonna lie, I was shocked at the price. A cheaper hanger is $20. A nicer one is $40. I figured a 3D ti hanger would cost $500. So yeah, $85 isn't a bad price for a pretty bling product that actually performs a function. I've wasted a lot more money on a lot less useful products on a bike.

@cipo36an203 2 місяці тому

Josh, I think you took a shortcut saying that low grade, low stiffness aluminium alloy. All the aluminium aloys have mostly the same stiffness at 70GPA. I will agree they may be of low strength (reach plastic deformation with less stress, so permanently bent wisth greater ease). This being said I appreciate the analyse around the specific of a TA frame (versus the traditional rim brake frames)

@PeakTorque 2 місяці тому

Hey Josh, i am a fan of your work let me say. But, some of your figures have me scratching for the BS meter: at 4:22 the Ti version shows to be 5x stiffer for the same geometry as Aluminium. At absolute best SLM Ti is 1.5x stiffer and Aluminium (105 GPa vs 70GPa), with the same geometry. So how do you come up with that? At 10:20 you say you improve stiffness 6-12x over an Alu hanger. IF you want the ultimate in stiffness you are better off going with steel and in like for like geometry you're only going to get 3x. Please let me know if I have missed something!

@SupercarAlex150 2 місяці тому

Thanks for fact checking this shill man

@SILCAVelo 2 місяці тому

@PeakTorque You are correct for same geometry, which is why we aren't in any way using same geometry (edit from rereading your comment: the Al hanger has an I-beam type cross-section in the model, it just isn't super visible at that angle). You have to account for material removal done to AL hangers to reduce weight, both stock and aftermarket AL hanger designs pretty much all use geometry cast into the part or post machined into the part to reduce weight, this means all material is removed from the outer surfaces of the part, where the material is needed most for both strength and stiffness. With 3DP, we can maintain material at the outermost surfaces of the part, and use infil to strategically move stress through and across the part in ways that are not possible with CNC machined parts. You are also 100% correct that a solid steel hanger plate hanger would be the stiffest option, but at 2-3x the weight of the original AL hanger I don't see too many people actually buying or using one of those, particularly as they wouldn't be cheap either. Lastly, we could have made our numbers look even better if we compared to minimalist CNC hangers like those from Sigeyi or Frames and Gear.. those things are shockingly flexible in both lateral bending and torsion and prone to failure due to excessive machining to hit weight targets, but we have not engaged that topic here at all.

@SILCAVelo 2 місяці тому

While the statistics cited are accurate, the assumptions made about everything else were not, sorry. (edit: realizing @peaktorque assumed equal geometry in the FEA which is not the case, Al hanger was relieved into I-beam type section to match original stock hanger for that model, while Ti hanger in model was hollow.

@PeakTorque 2 місяці тому

OK, interesting! Thank you for replying quickly. The FEA models look more or less like for like but yes could be pocketed behind.@@SILCAVelo

@PeakTorque 2 місяці тому

Working through the numbers out loud. To achieve a 10x increase in bending stiffness (EI) we have a 1.5x increase in material stiffness (E) and a 6.6x increase in geometry stiffness (I). My thru axle bikes' hangers are not pocketed so (I) cannot be increased so I'd be at 1.5x max. Still quite fancy trying one though 😀

@Adonis-qj1nq 2 місяці тому

Been waiting for one of these hangers for my Tarmac SL7 for a while now but it was always sold out, but this video reminded me to check for more stock, and finally got my hands on one. Nice informative video regarding the product launch. I think I pretty much have all the Silca products at this point. Can’t wait to see what you come up with next!

@SILCAVelo 2 місяці тому

Thanks for the kind words and sorry on the sell-out.. yes, those specialized ones have been pretty hot sellers, a couple of WT teams wiped us out early on, and with like 30 other variants in total to print, we just never seem to make enough, but we sure are trying!

@robdogracing 2 місяці тому

Nice work Silca Fam! Im Currently an “acoustic kid” with all cable actuated shifting and rim brake bikes, but you better believe it when I eventually upgrade to a bike with through axles. I’m getting one of these nifty Ti Silca hangers.

@ianthedondaws7559 2 місяці тому

Love these information videos and love this product and hope I can get one for my pinarello grevil f gravel bike soon 🙏

@marcospola Місяць тому

Amazing product, as usual! And the explanation is like a phD lecture, i love it

@StankFernatra 2 місяці тому

Bravo- Well done.

@MichaelWilliams-iv6dj 2 місяці тому

Litespeed made a Ti hanger for the C1 when that bike came out in probably 2010. The Ti hanger worked so much better than the original aluminum hanger. It was definitely a worthwhile upgrade. I would be interested in hangers for SystemSix and a Hanzo

@850arrrsaylikepirate 2 місяці тому

Great video and would love to get one for each of my 2023 Giant TCR Advanced SL bikes.

@openwheelracing88 2 місяці тому

Just built a BMC TM SLR with direct mount hanger. It was way off from factory. I bent it back straight but realized just how flexy and soft it is.

@Primifluous 2 місяці тому

That's to save the frame from damage.

@stephenkohler3472 2 місяці тому

I would love to get one for my Ibis Mojo 4. The same hanger is used on a ton of pre-UDH Ibis models.

@michaelwierzba9307 2 місяці тому

Yep, you are completely right. I don't need it. Honestly, I don't even want it. But....I am very interested!

@jvogel431 2 місяці тому

Josh, you are killing me. Every single time I hear you talk about something new from Silca I feel an overwhelming compulsion to buy it. I just ordered the mech hanger for my Tarmac SL7 simply because you told me to. And, I have no doubt that the shifting on my Di2 waxed chain drive train will go from perfect to ultra perfect. Thanks and keep up the amazing work.

@Saladh_Olivier 2 місяці тому

Josh certainly has an incredible skill of presenting/selling. Thanks to him I now have many Silca products 😆

@BikesKomsCRO 2 місяці тому

Bro just bend over and take it....

@zsoltsiket7222 2 місяці тому

😂

@TnFruit 2 місяці тому

This is how marketing works 😅

@BikesKomsCRO 2 місяці тому

@@TnFruit yep, when are dont have any critical thinking skills and believe all marketing hype.

@eBikerHowie 2 місяці тому

Most bike frames are not perfectly aligned with the cassette. I always have to align the derailleur hanger with any new bike I build. How do I accomplish a slight alignment problem with a Ti UDH?

@jerseybarrier64 2 місяці тому

I have the same question. Maybe the reason we bend them is because they are bent to begin with which won't be the case with these?

@_Zane__ 2 місяці тому

Yeah I was thinking the same thing...

@Adonis-qj1nq 2 місяці тому

Can’t speak to SRAM, but you can trim the derailleur alignment in the E-Tube app, you can also adjust the cassette alightment using small shims behind the casstee on the free hub. I needed shims to get my 2 wheel sets and trainer to match each other, I then used the E-Tube app to finalize the derailleur. I can now switch between them all without having to re-tune the derailleur each time. Presumably SRAM has a similar app?

@SILCAVelo 2 місяці тому

Couple of things.. so these can be bent without breaking for alignment purposes, it just takes a lot of force, but secondly, the problem is no longer with the frame/hanger.. it's the hanger to hub interface. Like I say in the video, the frame is not just there to be squished in between the hub/hanger and the nut or some version of that.. if the hanger is perpendicular to the hub spindle, nothing else matters. This is a far cry from the QR days where typically the hanger was on the other side of the frame from the hub spindle (which was tiny) and it was all just pinched together with a spindly little rod.

@ElevationEveryWeekend 2 місяці тому

I got to test the GX Transmission extensively, and the shift execution is impressive. I have a new Ibis DV9 with UDH and regular GX, if this Ti hanger gets me anything closer to the Transmission feel I might need to try it.

@ankjaers 2 місяці тому

I’m far from world tour pro. I think some commuters ride longer over a year than me. But what I am is busy with family, work and just life in general. If I can just save some down time on my bike by not needing to adjust gears this product is worth it to me.

@hbade 2 місяці тому

Can't wait to get one for the BMC Teammachine R!

@JS-bs2vb 2 місяці тому

Brilliant! Yes, it’s for me even though I’m not a pro. Can you make it for Wilier 0 SLR/SL.

@brianmcinnis3886 Місяць тому

I would love to see a hanger for the Otso WARAKIN TI. Thanks for my favorite tech show on the internet!

@EricAbbottTri 2 місяці тому

I'm sold, I need this!!! Just bummed that Lauf Tru Grit uses a proprietary hanger.

@paulpoletes6341 2 місяці тому

Josh, in the video you mentioned using the TI hanger with a b-link. How does the b-link or a Wolftooth Road Link affect the stiffness of the combined hanger and b-link? Does flex in the link negate at all the stiffness we gain from the TI hanger?

@jaisonranchhod6646 2 місяці тому

Sounds like a good product, but im still on rim brakes, but would consider for a thru axle based bike

@davidlilja9180 2 місяці тому

Another great Silca engineered, MG product, Josh. You must already know that your customers and audience await every single new Silca product release. It gets all of us with open-minds thinking more about other MG opportunities, too. 🤔 I get why you suggest these are only for thru-axle bikes! 👍 However, already I can hear my Cervelo RCA frameset screaming out loud, 😱 "What about me?" (🎶), unlike my R5 & RS framesets that don't care nearly so much. 🥱 You may have heard a classic Aussie song with this title above. My wallet also shouts out similar things. Potentially catastrophic events are always a threat to bikes ridden in the real world. Sticks and crashes don't care what brake system you're riding with, they can just happen to any of us. Even you said that non thru-axled frames are more vulnerable to such damage.🤪 There are a few (possibly many) brands that have used the exact same hanger over many generations of their frames. Will you re-consider making hangers for some of the perhaps 'more collectable' framesets? Some of us are not yet interested in, or able to, consider thru-axles. Didn't you wanna help us keep these bikes out of landfill, too? 😭This will become especially so as original spec hangers become less accessible as spares. It's not like I'm asking you to make a taller sock for those of us who are, in fact, taller, is it? 😇 🙏

@chanstevens9658 2 місяці тому

Count me in the want but don't need camp, but can't imagine Silca being able to scan/replicate the custom hanger on my Battaglin. By the way, I think the correct term for kidding mechanical shifting is analog, not acoustic 😉

@billmaidment5623 2 місяці тому

How do I select the correct model for my bike? Specialized Aethos, Niner RLT 9 RDO, Santa Cruz Tallboy

@TheGinger1 2 місяці тому

Can they be anodised funky colours if we ask really nicely?

@SuperJungeJunge 2 місяці тому

Im curious what the minimum threshold is to get a new variation printed? Ive got a few bikes that aren't the most common, but would be open to paying for the set up for a set of hangers.

@tippy35075 2 місяці тому

I've got a Norco optic, would be nice to have, I've had a hanger snap off and result in spoke and rear triangle damage, thank goodness for warranty, the replaced both

@TV-ui1tl 2 місяці тому

Josh looks like a great product. Will you be making for TIME ADHX?

@ccatwood 2 місяці тому

The finite element model visualization is nice. How about a non-linear finite element simulation (ls-dyna) of the gyroid crushing mode (stick catching derailleur)?

@wehiro 2 місяці тому

Campagnolo Super Record 12s ... which Hanger should I buy ... I think the Shimano one should work better right ? ... When are the Hangers for Tarmac SL6 back in Stock? THX!

@HazzyWazzey 2 місяці тому

Will give this a go whenever my Sigeyi hanger may snap

@ItsThatAaron 2 місяці тому

Would love to have one for the latest Merida Scultura/Reacto etc. Just got to make one design for most merida road bikes :D

@thedronescene7474 2 місяці тому

You need to do one for Moots Road and Gravel Bikes. Specially the Vamoots CRD.

@chrisridesbicycles 2 місяці тому

Two questions: Could the used grade of titanium be anodized in colors? On the MTB, the internal structure will most likely fill up with dirt quickly. Is there a solution for that?

@laneromel5667 2 місяці тому

I recently switched to a Ti bike with thru axle, what I noticed immediately was how much crisper the shifts were.

@CL-dh2mf 2 місяці тому

Would be so great if you could make one for the Kona Sutra LTD from 2017 with qr. That thing is crazy soft. I bent it, so I ordererd one at the lbs. Didnt fit.😬 Many bikepackers would love you for that Im sure!❤

@CatManDoSocial 2 місяці тому

I had a stick do exactly as you described last year on my MTB and I had to get a new rear triangle, AXS derailleur, hanger, and chain. That was a terrible experience, and given my trails, it could easily happen again. I'll be getting the Silca hanger if you have them for a 2018 Specialized Epic Carbon.

@janeblogs324 2 місяці тому

A stick do what? I've got an epic with broken rear triangle too, apparently a known issue but they can snap the chain stay in the work stand just from tightening the swingarm too tight (or not tight enough will do the same damage and will snap next time you torque it up)

@CatManDoSocial 2 місяці тому

@@janeblogs324Haha. A stick got caught in my rear spokes in front of the RD. As the wheel continued to spin, it pulled the RD up and around, ripping the RD/hanger off but not before severely damaging the carbon on the inside of the dropout. It destroyed the RD, hanger, and chain and broke off a tooth on my X01 cassette in the process. So a stick cost me a small fortune in a fraction of a second.

@nizerp 2 місяці тому

A little UX feedback from a UX research professional - (1) the selection on the product details page is confusing. First, "Step 1" is less obvious than the text form, which has a very high "type here" affordance; in other words, the selection is too subtle. Second, "Step 1" starts with the UDH compatible piping which is far less obvious knowledge than "select brand". Recommendations (A) replace piping architecture on PDP with a simple drop down like you see in the "no" piping path. (2) Move/gate the "what's next" form after a selection of "other" in the brand dropdown selector. I suspect this will help a little with conversions - at least a little.

@SILCAVelo 2 місяці тому

Thanks and forwarded to our e-comm person. Sorry, we try super hard, but aren't exactly web or UX designers, so thanks for the feedback!

@BruceJFriedman 2 місяці тому

Ha! Was thinking the same. Site needs a bit of professional UX design help. You may not be web experts but you ARE an eCommerce driven company so removing friction in the buying process is just as important as removing friction in cycling.

@chrikim67 2 місяці тому

I´m definately one of those, that are in the market for a 3D printed derailleur hanger. I live in Denmark and unfortunately it doesn't seem that the Silca EU site is up and running. Will that happen soon? 🤞

@CaesarrrZ 2 місяці тому

Hi! Any plans yet to add one for the BMC Teammachine?

@nateisright 2 місяці тому

I’m excited to get one on my UDH Santa Cruz Blur. If you breathe on my standard UDH it goes out of alignment.

@HarishChouhan 2 місяці тому

Josh does Silca make this for Ceepo bike frames?

@youngb3 2 місяці тому

are canyon grail and grizl hangers the same?

@FSE-Coaching 2 місяці тому

Would love a hangar for Trek Checkpoint and Trek Supercaliber. Thanks!

@cyberspace66 2 місяці тому

I’ll take anything Silca puts out with data and pro/tour-tested results. Josh will explain things to bring it into perspective without marketing jargon IMO. Give him a break… they have overhead to account for, possible silent investors they have to satisfy as well as respecting the original family who owned/started the brand. I don’t know, but he does provide data to the gospel and I’ll try if it sounds good. It also helps he’s been in the science end of the industry for sometime prior to Silca. To date, I’ve purchased the Ti bottle cages (several), tattico mini pump, chain wax in the bag (first release,) first release of secret chain lube sauce (when it had WAY more tungsten in it than in recent years), thick ass bar tape, tire levers (great btw), gear wipes, T-ratchet set, Hirobel clamp and the Seat Capsule. Call me a bike junkie (which I’m not as I have other hobbies), but I’ve seen and bought enough junk over the years to filter quality products. I’m happy with Silca overall. Just my 2 drops of tungsten disulfide.

@jackmorrissey5318 2 місяці тому

Please make one for the Orbea Orca Aero (MY 2022 and onwards) Thanks

@kenneththomas3558 2 місяці тому

Love it

@stuartdryer1352 7 днів тому

Wish I could get one for my non-Specialized, non-Trek bike.

@jeanm289 2 місяці тому

Can you make a direct mount for Bastion and Standert please, willing to pay double 🙏

@joshadam8185 2 місяці тому

This looks great. WIll you be making one for Orbea Orca Aero?

@SILCAVelo 2 місяці тому

Orbea has been a brand that is not forthcoming with hanger designs and hangers are rather hard to find to buy and scan. We're working to add them to the list, but it will not be quick!

@joshadam8185 2 місяці тому

@@SILCAVelo awesome thanks, I will keep my eye out for it. You would think bike companies would be more supportive of this type of work. Appreciate your research.

@svenbiberstein Місяць тому

I second this request!

@svenbiberstein Місяць тому

@@SILCAVeloI have a spare new derailleur hanger for the Orbea Orca Aero here. Should I send it to you, so that it could be faster in offering a TI version for this frame?

@DeltaEchoVictorEchoRomeo 2 місяці тому

Please consider adding a hanger for 2021 Specialized Turbo Levo SL, thanks!

@daveandrews9936 Місяць тому

Are these going to be produced again? Looking for a 102 Shimano.

@Verfblikje 2 місяці тому

How much improvement wil I feel on a cable actuated drivetrain?

@PederNestingen 2 місяці тому

I have this same question. In the video, Josh says the product is really designed for electric shifting, which has a greater shift load. So with cable shifting, would there be no benefit, minimal benefit, or marginal benefit. (Appreciate Silca products and vids!)

@matteo.ceriotti 2 місяці тому

I went to check the hanger for my bike... the Canyon model is called "Endurace"!

@cauldron101 2 місяці тому

If you were to choose in a fall what to damage, what would that be, the frame, the hanger, the derailleur? Congrats! With your ever hard titanium derailleur you will damage your derailleur, or your frame, or both, but you will save that hanger!

@tomcarney654 2 місяці тому

I have a question if have a crash which will fail first the derailer or your hanger ? The derailer would be cable style 12 speed with a udh hanger

@SILCAVelo 2 місяці тому

The hanger is designed to fail before derailleur or frame are damaged, but of course it just so depends on the actual situation/condition.. something like a stick in the derailleur, or a very hard perpendicular impact on derailleur itself still has the capacity to pretty much break everything.. but for the most common impacts, laying the bike down on the drive side, derailleur impacted by a wheel or foot from another rider, minor crashing, it should be fine.

@tomcarney654 2 місяці тому

Thank you for detailed reply

@nilspetersen5566 2 місяці тому

I got one of these for my Dogma F and noticed that it has a different shape than the original. Is this deliberate or did I get the wrong model?

@SILCAVelo 2 місяці тому

Pinarello direct mount from Pinarello inverts the positions of the 2 dropout pieces, requiring both to change if you go from standard to direct. Our hanger uses the outer plate from the standard hanger and replaces only the inner piece so that you don't have to replace both. Hope that makes sense? If you have further questions please email our help line from our website www.silca.cc

@mikehhhhhhh 2 місяці тому

When can we expect new stock of the specialized shimano hanger?

@SILCAVelo 2 місяці тому

We're making them every day.. but sales demand continues to outstrip production. Please keep an eye out, we're generally putting more in inventory every day or every other day.

@donschloth5785 2 місяці тому

Josh, will the Hanger 105 fit the latest Crux frameset? 2022/23

@icecreamheadache 2 місяці тому

So what I'm seeing is: compared to the chart at 14:06, the website high-level lists only the direct mount derailleurs on the hanger page. So if you go to the 105 product page, that's for a direct mount Shimano hanger. But then if you click the 'Sram' option (and if the pic change is correct), you're now buying the 205 hanger, which is equivalent to the stock hanger the Crux comes with. It's kind of confusing, hopefully Silca can confirm (or correct) what I wrote haha.

@donschloth6673 2 місяці тому

I saw that AFTER I ordered! Looks like I’ll be doing an exchange

@5amba 2 місяці тому

I already see me cleaning all the gunk out of that Ti structure... lol they are all sold out 🙈😄

@5amba 2 місяці тому

please make one for Scott Addict / Addict Gravel 🙏

@Camerooony11 2 місяці тому

There have been a couple instances where my bike was stationary and fell over on its drive side. The stock derailleur hanger got bent and I had to pay $20 at my LBS to get it realigned. Would the same thing happen with a 3DP Ti derailleur hanger?

@SILCAVelo 2 місяці тому

Totally depends on how hard it landed.. 95% of the time, it wouldn't bend as it's much stronger and stiffer than aluminum, but if the bike fell in a way that it hit purely on the derailleur at a certain level, then the hanger will break and need to be replaced. It's sort of an odds game, but most aluminum hangers bend at a low percentage of the impact that will damage other parts of the bike, say 20%.. while we don't bend or see damage at those loads, but then break when you get to ~90% of the load that will damage other parts of the bike in order to protect those other (more expensive) parts.

@nokia6800 2 місяці тому

Scott addict rc 2020+ please! I've been trying ti get it for month

@davidide1525 2 місяці тому

Do you make one for a 2012 Moots VaMoots CR ?

@SILCAVelo 2 місяці тому

We won't make them for rim brake bikes, thru-axle only, and are talking with Moots now about hangers for thru-axle models. Thanks!

@_Zane__ 2 місяці тому

Do you think 3d printed glass filled nylon would work for a hanger?

@SILCAVelo 2 місяці тому

Definitely not.. we see the lightweight CNC aluminum ones fail at surprisingly high rates in the field as the forces are quite a bit higher than seems obvious at first. There are a couple of good forum threads on the internet on both 3DP plastic and lightweight CNC aluminum hangers that you can find with Google, interesting stuff!

@PetexRocc Місяць тому

I have noticed the Cannondale EF team have actually stopped using a custom direct mount hanger so...

@martinwiire 2 місяці тому

Question - isn't the point of a "soft" hanger also to protect the rear derailleur?

@janeblogs324 2 місяці тому

1980s-90s never had an issue with stiff steel hangers. Shimano Derailleurs are only $100 with a clutch so they are as cheap as this hanger

@n0ch91c3s 2 місяці тому

It was never to protect the derailleur. It was to protect the frame.

@bikecommuter24 2 місяці тому

I have no need to buy something like that but I got no negative feelings or comments on it, I think it is great the technology is advancing the way it is.

@BruceJFriedman 2 місяці тому

Can’t wait for a 707. Colnago V3RS.

@SGTTEMPEST 2 місяці тому

But it really can be a little wasteful? Seem like hangars that have long attachments like the silca 107 shimano vs the 107 sram for the madone '22 this will be more pronounced. If you shorten up the arm the stiffness will go up and will be far less impactful in the above situation? Be curious to see actual deflection difference in the 107 sram vs shimano and also compared to the stock ones. I did buy the sram 107 but question my sanity!

@Saladh_Olivier 2 місяці тому

One for Time ADH Disc pretty please 🙏

@eddisonli 2 місяці тому

Tried using your hanger finder calculator to find out which is the model for LAB71. It said 101 however 101 doesn’t works with Cannondale LAB71 at all.

@SILCAVelo 2 місяці тому

Sorry, the SuperSix EVO w/SpeedRelease is prior to the new Lab71, we just received CAD from Cannondale on the Lab71 and hope to have that available in 4-6 weeks.

@donwinston 2 місяці тому

Why can't there be a set of standard derailleur hangers? I feel I have to buy numerous spare hangers in case the company I bought the frame from stops making them. I crash frequently and use up a couple every year or so on my rim brake bike. I just bought a brand new disc brake bike. I haven't built it yet. It is my first disc brake bike. Never even ridden one before. Does this mean I don't have to worry about this anymore? Are disc brake bike hangers all the same? News to me if so.

@SILCAVelo 2 місяці тому

No standard yet.. SRAM is trying with the UDH, but only a handful of brands have adopted it yet.. fingers crossed that we'll find some sanity here and the industry can converge on a solution for once!!

@davideisemann3335 2 місяці тому

Dude laser sinter an element 22 version of a road link

@Vam1500 2 місяці тому

I am looking forward to the upcoming Silca 14 speed all carbon/titanium electronic self charging cold fusion room temperature superconducting groupset in partnership with open AI, SpaceX, and Nvidia.

@DH1dh 2 місяці тому

Josh, sort out your stock levels, stop teasing us with what we could have 🤷‍♂️ I’ve been wanting one since the launch. So, where and how can we buy one please?

@teunluijbregts2533 2 місяці тому

Now this product I can see the gains - nice👍👍 Will you be making a 34.9 front derailleur clamp as well? (Asking cause I have a titanium frame I need to install a 2x12 GRX derailleur on - no technical gains just to make it look cool 😋)

@brandonposer3026 2 місяці тому

Please make a Syntace version.

@aaron_TanCK 2 місяці тому

If only your have 1 for Standert Kressiege RS

@angelortiz353 2 місяці тому

Im still trying to get one for my cervelo aspero 5 to no luck🤷

@SILCAVelo 2 місяці тому

Sorry, the Cervelo design has been particularly hard to get just right as it has a giant male thread that has to mate with a Cervelo produced aluminum nut that has had more variance than we initially thought.. please give us a couple of more weeks on that fitment, working diligently on it!!

@angelortiz353 2 місяці тому

@@SILCAVelo ah ok thank you for the reply and info i will continue to wait🙏

@AverageBensCycling 2 місяці тому

Waiting for my bikes to be included (salsa and argon18)

@petersouthernboy6327 2 місяці тому

Titanium makes everything better.

@nickkambitis5340 Місяць тому

That image of the carbon repair workshop had a frame clamped on the top tube in a work stand. That’s a big No no !!

@andrisjordan 2 місяці тому

Please add Wilier Filante SLR !

@rayF4rio 2 місяці тому

This is (like Josh says) for pro's who don't have to pay, and for the gear geeks who have money to burn. I fall into the later category, but this overpriced "upgrade" is one step too far down the ridiculous rabbit hole for me. One thing for sure, Dr. Porter sure knows how to sell, his marketing hype is next level. However, I will say that my Tattico pump awesome!! I just wish my Silca aero socks were a little taller. 😂

@PetexRocc 2 місяці тому

He is a good salesman

@niklasbirksted8175 2 місяці тому

Colnago isn't in the list :(

@SILCAVelo 2 місяці тому

We hope to have V4 and C68 compatibility within a few months.. demand for these initial models has been much higher than expected which is slowing the addition of new models, sorry!

@galenkehler 2 місяці тому

A "Trojan Horse" is not the right analogy, for 2 reasons. 1. The horse had no practical purpose in itself 2. The hidden contents of the horse was destructive to the recipients. A better analogy would be the planting of legumes in depleted soil to help to regenerate and fix nitrogen, as it takes a poor situation and improves it for any subsequent crop, but specifically helps to set the stage for planting nitrogen consuming crops.

@stevenagelkerke8246 2 місяці тому

Giant Revolt please!

@cycleclimber1 Місяць тому

I need one for a Giant Revolt too!

@mortis13 2 місяці тому

Canyon grail please

@tracerxrider 2 місяці тому

Here for the knowledge, staying for the comments.

@undrwings 2 місяці тому

I'm the lame-o with the older bike and a QR. Guess this is one Silca product i'll pass on for now. Maybe thru-axle soon!

@davidb4114 2 місяці тому

4:02 acoustic? Maybe the word you were looking for was “analog”

@SILCAVelo 2 місяці тому

Ha! That works too.. but the kids these days really do call them 'acoustic' which is quite fun.. definitely did a double take the first time I heard it!