Today we will do a smooth start of the iron for the Bulgarians with their own hands.
This life hacking from an iron or electric stove can significantly reduce the speed of the grinder, which is very convenient when working with plastic and plexiglass. If you do not have a dimer yet, but you need to reduce the speed of the grinder, this life hack will help. Look for an old iron or hotplate and it will replace, albeit temporarily, a soft start unit.
Smooth start will extend the life of the grinder.
And the need to reduce the speed can occur when working with plastic and when grinding or polishing any surfaces. If you still do not have a dimmer, Assemble it with your own hands the power regulator.
💡 Useful links recommended in the video;
✂︎- - - - - - - ✂︎ - - - - - - -✂︎
☑ Buy DIMMER POWER 4000 W on Aliexpress - ali.pub/2ubeel
✅ VIDEO - How to make a DIMMER - • Регулятор оборотов 220...
************** 🔊 🔊 🔊 **************
The design is simple, and the components are cheap.
But, if you slow down the speed of the grinder or make a smooth start you need right now .... So, make a power regulator later and now we will collective farm. Connect in series with the grinder to the network an old iron.
The scheme is simple. Even a schoolboy will collect
You will need a Bulgarian, an external outlet, an old 1000-watt iron.
My iron is without a plug, so I will connect one wire from an iron to a wire that has a plug and insulate it with heat shrink. The wire that you cut is connected to the outlet. Going from the fork on one side. And from the iron sit down on the other side.
We are building an outlet ... It was cool homemade If you do not have an iron, but there is a hotplate, you can connect it in the same way.
In the video, I conducted a series of tests measuring the readings - I used a power meter.
In general, this hand-made life hacking I like. If he likes you too. Put your finger on top if you like a cool homemade product. It can definitely be used for certain types of work.
If we compare the iron and homemade dimmer, then it has 2 serious drawbacks.
It is more bulky. And can not regulate the engine speed as a dimmer.
But there are advantages.
Dimmers are not the best solution for asynchronous motors. Because it lowers only the voltage, and the frequency remains the same. In this connection, greatly reducing the speed, the grinder can be burned.
Connecting through the iron, the grinder is softer and not so hot.
By the way, one of the subscribers wrote that when the household fan was connected to the dimmer, the fan motor started to buzz heavily. If he connected a fan, for example, through a stowatt soldering iron, he would solve this problem faster and easier.
By the way, the idea with the iron is not mine. It belongs to one of the subscribers.
Use life hacking with an iron or collect a dimmer - you decide. I think I will use both methods. That's all dear friends. Thank you for watching
That's all dear friends. For you, the author of the channel 1000 DIY's and Advice tried - 1000 GAME AND TIPS
Do not forget to leave a Like or Dislike and subscribe to my channel.
Now you know that the iron can replace the soft starter.
✂︎- - - - - - - ✂︎ - - - - - - -✂︎
💰 How to make money on Aliexpress - EPN Partner Program EARNINGS on Aliexpress - ePN Affiliate - ali.pub/2ubyb4
💗 Likecoin - cryptocurrency for likes: likecoin.pro/@sadko777/wux8/gsk1