solving the LEGO city train problem (no room for loops!)

Рік тому

Solving the fundamental incompatibility that LEGO cities have with LEGO trains: no room for a loop!
Check out eggybricks.com ➡️ for lovingly-crafted train instructions and stickers, and sign up for the email list to get behind-the-scenes details and occasional off-the-cuff videos delivered to your inbox!
How to automate LEGO PoweredUp trains and trams, with either Python (Pybricks) or the LEGO PoweredUp app! Specifically, automate your train to fit in a small LEGO city that doesn't have room to hold a closed train track loop.
TL;DR:
Pybricks code for automating your LEGO train or tram to go back and forth forever, stopping at specific spots:
github.com/eggybricks/powered...
PoweredUp code blocks for automating your LEGO train or tram to go back and forth forever, stopping at specific spots:
github.com/eggybricks/powered...
Summary:
In this video, we:
- build the LEGO 60337 Express Passenger Train
- integrate the 88007 PoweredUp Color & Distance Sensor (and MINDSTORMS Robot Inventor Color Sensor) into the train, and
- show how to program it to reverse direction on cue with both Pybricks (no phone required!) and the PoweredUp app
- Mini City Update: finally get to add the train to our city!! 🚊🌆
Details:
To automate your train without using a computer or phone every time you run it, you can use Pybricks. Pybricks is two things: one, special firmware that runs on the hub, and two, a web-based development environment that lets you program the hub in Python, from your computer. Pybricks is fully web-based, so you don't need to download an app: to set it up, you just go to the website code.pybricks.com. The working code we built in the video is here: github.com/eggybricks/powered...
You can also use the first-party LEGO PoweredUp app to automate your train using "Code Blocks." There are some quirks, limitations, and bugs with this right now though. A working version we built to do the same thing shown in this video is here: github.com/eggybricks/powered...
Other helpful resources:
- Pybricks Getting Started: pybricks.com/install/
- @RacingBrick 's PoweredUp code block guide: racingbrick.com/powered-up-co...
- @Brickostan 's automation code blocks tutorial: • Lego Powered Up Automa...

КОМЕНТАРІ: 203

@eggybricks Рік тому

The train in the video is LEGO Express Passenger Train 60337. If you want to purchase it, consider using this link (this is an affiliate link, which means when you click the link and make a purchase, we receive a commission, which helps to support the channel!): bit.ly/lego-express-passenger-train-60337 Links to the code shown in the video, plus the code blocks version if you don't want to use Pybricks: - Pybricks code to make the train run back and forth continuously, using color sensor: github.com/eggybricks/poweredup-color-sensor/blob/main/pybricks-code-for-60337-express-passenger-train.py - PoweredUp code blocks version of the same thing: github.com/eggybricks/poweredup-color-sensor/blob/main/PoweredUp%20Code%20Blocks%20for%2060337%20Express%20Passenger%20Train.pdf

@petterpavvalkroik7656 26 днів тому

Åäö

@irl_neil Рік тому

This is awesome, not many lego channels mixing python coding and city building! I love the way the train comes from behind the modulars on either side too

@pybricks Рік тому

Wow, this is such a great video! We're really glad you use Pybricks in your city :)

@eggybricks Рік тому

It's you!! Thanks so much, and thanks for making our LEGO move!

@pybricks Рік тому

@@eggybricks let us know if you think any features are missing and we'll put them on the list!

@brandonpalmer2338 4 місяці тому

@pybricks, can I run pybricks firmware while still controlling the hub via remote or cell phone app? Wondering, because while I am interested in the programming aspect and making the trains do specific tasks, my 4 and 6 year old simply want the train to go as fast as possible in a circle.

@pybricks 4 місяці тому

@@brandonpalmer2338 You can switch back firmware easily using the standard LEGO app. But better yet.... you could just make a Pybricks program that does exactly what your kids want 😄 For example 1) just full speed or 2) something with the train remote or 3) a program that will just add 10% speed each time you press the button. That way they don't even need a phone/remote.

@paulharris4256 3 місяці тому

Can I use Pybricks on an Apple computer/

@KayoMichiels 2 місяці тому

You could have use the depth sensor for added realism: trains don't just stop on a dime... they roll a bit untill they stop... you could place a small plate in the center of the green plate and let the train slow down when it sees the green plate, and stop when the sensor sees the raised bit.

@JasonHorrocks 2 місяці тому

Don't know if you'd have space for the depth sensor? As think the sensor they used only does colour?

@sentien13 Рік тому

Massive technic fan, have a huge electronics background, never even considered this being possible... Great effort has been made for the video to explain what is technically a difficult subject into a simple to understand format. Good job!

@sinan_collects Рік тому

Awesome! I also have a small city (actually way smaller than yours ~ 4 x 2.5 base plates). This is very inspiring! I can't wait to see the rest of your city updates. Subscribed.

@KrookedOne Рік тому

This is truly amazing, please keep making these splendid videos. I learned so much with this, and you guys make it so entertaining. I also love what you guys are doing mixing coding and Lego. It’s wonderful, I can’t wait to see more.

@brandoncheung3052 Рік тому

This is so cool! Definitely adds a lot of character to your city. When I eventually build my city I’ll keep this in mind!

@krismiz Рік тому

It's always amazing to see how your minds work! This tots needs a million views!

@imthatonegrl Рік тому

Neat!!! Would love to see more videos from you two :)

@Richi0800 Рік тому

You could improve that program a little so the train doesnt stop as hard as it does right now (maybe looks very good with a bigger layout in the future). Lets say you use a longer indicator. Now you could initiate a reduction of speed every few ms as long as it reads green. When the green indicator is over it could do the usual break but with a bit of tweaking the settings and playing with the length of the indicator you could get a smooth break motion. Really cool job, that one really inspired me!

@33andy33gmail 2 місяці тому

Or use another colour or three to indicate "slow down"

@SumacMountainTimes 2 місяці тому

I used "stop" then "wait" (for how long the want the train to roll) before "brake". This got the train to ease in before the brake is applied

@BatteryPoweredBricks Рік тому

Nice job! I'm a bit of a copy paste coder, but I love the functionality that Pybricks adds to the Powered Up system. I wouldn't have invested as much in the system without that option. Not just for added functionality but knowing that the official Lego apps will one day be abandoned. Also being able to store code on the hubs themselves is a huge game changer! Thanks for making this video and bringing more attention to Pybricks!

@normivey6963 Рік тому

So happy I found your channel, and especially this video. Looking forward to your next one!

@eggybricks Рік тому

Thanks so much!

@amplef0rth1 Рік тому

This is great! Was looking for this solution awhile back. Can’t wait to see what’s next!

@braccoz Рік тому

You writing code, and then running it on legos is such a cool real world application. I'm happy that you showed the process, keep up the good work :)

@chrisegonsearlemusic Рік тому

I feel like this channel is going to do really well 😸 Got my kid a brio set the other day and now I want something I can make really fun for me too haha.

@PDXPiggy Рік тому

Awesome video! Excited for all your future videos!

@brickcitymatt Рік тому

So cool!! Awesome work, subscribed! :)

@NisseHult101 5 місяців тому

Thanks for taking the time to explain how you did the coding and also explain the differences between the two sensors, excellent work! I'm really tempted to also buy a color sensor and try it out myself now!

@RayRay_AUS Рік тому

FANTASTIC video and tutorial - Great work guys!!! Going to try this out for myself once i buy a city train off your vid!

@beachhouse13 Рік тому

Really like this setup, but I have issues with your code. It is assuming that the train is between the red and yellow at startup. If it is not, it will run past the yellow and off the track. I would suggest you change your check_for_color to not have a parameter and to have a switch statement to see if it has one of the three command colors. Then depending on what color it sees it can stop or change directions. You will have to add a direction variable to allow the program to remember what direction it was going in the station and continue in that direction after the hold time. In fact, this would allow you to have just two colors (red and green for example). When it hits red it just looks to see what direction it is going, then change to the other. With this setup, the program will always stop at a reverse point and will not be dependent on a starting position.

@casperhansen826 Рік тому

Nice change, but what if the train starts at one of the ends then it might be best if they were two different colors

@anatoleh1 Рік тому

yes, I agree, the code in the video is unnecessarily complex

@easternpromises7991 9 місяців тому

@@anatoleh1 It's more than good enough for a basic intro. Every code can be refactored and refined later when you learn more ;)

@GodmanchesterGoblin Рік тому

Wow! Clearly I have been living under a rock for the last year or so (that's probably true, for a variety of reasons...). I was unaware of Pybricks until now. Having looked at one or two other videos on the topic it clearly has a great deal of potential. Thanks for opening my eyes to the possibilities.

@gregg8031 Рік тому

Yeyyyyy second episode so happy , keep up the good work

@Fye... Рік тому

As someone who's just getting into the hobby, your diagram you show 2:31 is a huge help... on top of the rest of the video of course! Other sources of information online can be severely lacking :-P

@eggybricks Рік тому

Thanks so much, glad it was useful!

@tomawest Рік тому

This is really great and has turned the train from a toy that my two kids fight over to control and crash, to one where they work together to get the train to do what they want to do! Excellent intro. I personally found that the mindstorms sensor was not always 100% reliable when it comes to reading green when using it myself. I dont have the color and distance sensor however I would imagine it would be about the same too. If the train was moving very slowly over the green, or was in a darkened space then this wasnt an issue. To fix the issue, I built an enclosure under the chassis of the train (similar to the one thats removed in order to get the sensor to work originally) and found that its now completely reliable. I would imagine this would likely result in you fixing the reliability of your color and distance sensor as you mentioned that it was not as reliable as the mindstorms sensor. Whilst I suspect that the shaded areas where you had your coloured plates and the brighter light from the mindstorms sensor were probably the reasons why you didnt experience issues with the mindstorms sensor.

@eggybricks Рік тому

Thanks so much! And really nice debugging and solution - this is a great fix for anyone encountering this issue. Thanks!

@everydaylivin8222 Рік тому

Y’all are so smart thanks that was very educational

@cris_moves Місяць тому

I am loving this channel and content.

@cyberneticwarmachine Рік тому

This is so cool! think alot of people with trolley/tram layouts in their city need this!

@isaiahdelrosario9743 Рік тому

my kid's duplo train does this. it has 5 colored action bricks. yellow = horn, white = lights, red = stop, blue = gas stop, green = reverse

@HyRax_Aus Рік тому

This is great - I love a practical programming example and wasn't actually aware of Pybricks. I learned something new and cool, and for that, you get a sub!

@Okabe009 8 місяців тому

This is amazing

@edoardom3677 5 місяців тому

This looks amazing!

@traci4327 Рік тому

This works so well and it was fascinating to watch the process.

@nathancommissariat3518 4 місяці тому

this is super cool. Had no idea that pybricks was a thing! Thanks so much!

@Gahanun Рік тому

Wow, I had no idea these detectors could be read by the hub. This opens up a lot of options! I will have to look into pybricks.

@Anaerin Рік тому

As a suggestion for V2, I'd say put the "current speed" into a variable, and have your colour detection be a switch statement. Then the "Green" case can stop and wait, then re-apply the speed from the variable, the "Yellow" case stops, waits, changes the speed variable to - speed, and sets that speed, and the "Red" case does the same, but with + speed. Then it'll work for tracks with more than one station, and rather than having to push the train to the station when it starts, it can check the sensor and if nothing's detected, start going forward.

@Erikve Рік тому

Hahaha, as a Lego-fanatic with a physics background working in a company where we are phasing often programming challenges, I can appreciate this video very very much. I somehow expected this to happen on this channel. Great video. I can imagine the train going forward and back would look even better with a bit smaller train or a bit longer track. The stopping part at a station would be a great addition to any city. Another great application would be to use the color sensor to open/close railway barriers.

@eggybricks Рік тому

Thanks! Great point on the size of train versus track - we actually just reduced the size of the train a little bit to better fit the space, like you describe. These are great ideas!

@paulharris4256 3 місяці тому

Thank you for a great explanation. I have just ordered the colour sensor! Can’t wait until it arrives! 😊

@MonoTownTV Рік тому

Really enjoyed this video - love mixing up code and LEGO! I'm working on using NodeMCU micro controllers and NFC sensors to control the trains in my city and it's been a ton of fun!

@samlewis2426 4 місяці тому

I'm really hoping that you two got another microphone, it wasn't all that bad I hope you didn't worry about it, and I hope you had as much fun making this as I did watching it

@tarakrogh4923 4 місяці тому

This is what I was looking for!!!! Thank you!!!!

@Sflhunter 7 місяців тому

Respect ✊🏻 Ty for this.

@TheIronWaffle Рік тому

I just stumbled on this and you’ve solved my desire to make the recent trolley move back and forth on an incomplete loop! Thank you. Not just that, but now I know I can even create “stops” at stations using the same tools! Of course, I don’t (yet) have the skill/patience to do the coding but now that I have this tutorial I have reason to start learning, and that’s a good thing. My only problem with this? Well, I went down an eggybricks rabbit hole and need more of your videos! I hope you have more eventually. Notifications are on. I’ve liked them all. This was obviously the most helpful for me, but the Ninjago Ultimate Judge was really fun and, as a film nut whose first modular was the Palace Cinema, I really enjoyed that video. I’d love to see an update. It’s one of the few modulars I’ve missed some. And it was so heartening to see you modify the screen to a foreign black and white movie! I hope all remains well with you both.

@eggybricks 10 місяців тому

Thanks so much for the kind words!

@terryrushing901 Рік тому

Thank you for this video! Been looking for something like thus for a while! Please don't delete.

@ericjohnson8686 Рік тому

This is amazing content. Mixing two of my loves, code and bricks :D

@chrisonthedot Рік тому

Thank you so much for teaching me how to do this. I really appreciate it. Definitely forwarding this to my nephew too!

@Tivis7 Рік тому

This is sooo cool!!! I never new about this!

@darthgbc363 Рік тому

Cool. Seen this idea used for a Great Ball Contraption many years ago using Power Functions & an NXT. 2 colors at each end. 1 to slow down & 1 to stop. 4 colors total. But they had sign posts on the side of the tracks for the color. Not down. So, when someone walked by with a certain color shirt, things would go wild. LOL.

@rebricks Рік тому

This is so amazing and I've been thinking about something like this for awhile now. I will definitely be incorporating some Python to automate my trains!

@MrGeocidal Рік тому

This is so cool! It's got me thinking about what sort of things I can automate around my house.

@bernhardwisser1132 Рік тому

This is great! Lot's of inspiration for my own layout! Thank you!

@accuratebrickinnovations Рік тому

Truly incredible stuff!

@moomoome42 Рік тому

This is fabulous!

@judekw6034 Рік тому

Great tutorial, thanks a lot!

@360Production.Services 2 місяці тому

Omg this is amazing! I am working with this tech now and I love it!

@michaelyocum7082 Рік тому

This is very cool. First time I've ever seen python and lego integrated.

@bladactania Рік тому

Great video! Well explained and presented!

@vesthepes Рік тому

This is so awesome, I'm trying it out... thank you guys!

@andrewsisson962 Рік тому

This is great, thanks for sharing.

@NickElliottuk Рік тому

Fantastic. I had no idea the poweredup hub was so versatile!

@AlanXEverfrost Рік тому

Brilliant. Just for realism aesthetics, I would humbly suggest putting tall enough buildings to block both outsides from view so you don't see the train stop at the ends, and have them wait a bit longer at each stop, the ends quite a bit more. That way, it looks like the train keeps going for quite a bit more, and the entering and exiting doesn't dominate the city as much. Movement draws the eye after all. And your city looks so beautiful you want to show off every detail.

@derekchan3343 Рік тому

Amazing presentation, very clear, and provide supporting that why you chose the sensor and Pybricks. Very easy to follow. I just want to say again....Amazing. thanks

@yasirbilloo1143 Рік тому

Wow this is amazing! haven't seen any/many lego channels showing working with PY Bricks, hats off to that guys, much appreciation from Pakistan!

@meowritz Рік тому

I'd love to see someone make a tram which have a reversible end station that just runs straight through a city along the roads and then reverses, this is a great way to do it, maybe there would be a way to strip the controller/battery box off uneccesary bulk to hide it better

@EmersonacReviews Рік тому

That's so clever, I've never thought of using other PU components to automate a LEGO train. Even though I'm not too experienced with the new Powered Up system (I mostly collect the old 9v trains from the 90's and early 2000's), it does make me want to try a variant of this with my own components. Maybe a system could work like this on 9v?

@ronniek4478 Рік тому

This is great. Would work great with a trolly car and what I've been trying to figure out how to do as I dont have space for a full loop track. Thanks.

@FreshDnB23 Рік тому

might consider doing a mini layout on my shelf now...

@TheCrazyMike92 2 місяці тому

Algorithmically, a simpler solution can be created. One color of brick for the "stop at the station" and one "stop and turn around" action.

@kaile0813 Рік тому

Love this!!!

@schwarzerritter5724 Рік тому

Have you seen how the old 4.5 Volt system did it? The battery box had a switch that was sticking out. When the switch hit an obstacle, it would reverse the current.

@Marc76-qt7vp 9 місяців тому

Maybe the intermittent fault of the color sensor has anything to do with two things, 1) the distance of the sensing element to the bricks and 2) providing contrast. Last I mean butting up say...black bricks to the colored bricks. Now the first I learned from an Arduino light sensor that measured varied output values based on distance. The second idea I got from an rpm counter, which stated contrast as a procedure. These ideas might improve consistency. Thank you for making these videos!

@misek_limbu Рік тому

This video is amazing and the thing that makes me super happy is that I m getting this Lego train in my birthday! :]

@eggybricks Рік тому

Happy birthday!!

@misek_limbu Рік тому

Not now,my birthday starts at july 1, not march 31 :|

@cgbolton1 4 місяці тому

I just completed my first prototype city tram using a modified version of the tram from Lego set 8404. In the past I have had this setup with a Power Functions motor, battery box and IR receiver but as with my other trains, this just goes around and around and the tram generally has a hard time with corners. Using the information from your video, a PoweredUp Hub and train motor along with PyBricks, I was able to implement a much nicer street level light rail line. Many light rail lines do exactly what you suggested in your video in that they are a linear line that just goes back and forth. This works great for LEGO city regardless of the size as it adds a nice and unique bit of motion on the street level. I am interested in implementing some automation to the big rail lines as I think your method would be great to allow trains to pull into stations based on the count of revolutions. I am also interested to know if it would be possible to control the behavior of multiple PoweredUp hubs such that using an external computer, the code would be able to monitor the status of different trains. For example, if train "A" just passed the red plate, then train "B" stops for a specified amount of time to let train "A" pass. It would be really interesting if automation like this could be accomplished as it would provide a greater degree of realism to LEGO train layouts.Thanks again for your wonderful video and the inspiration it provided! You guys are awesome - if you are ever in northern, AL check in with the Tennessee Valley LEGO Club!

@eggybricks 4 місяці тому

Glad this was helpful!! Funny that you mention automating bigger rail lines - we just finished a new city track layout (w/ automation) that coordinates four trains (with four hubs) to all share one station by monitoring each other's location. If you're interested, we'll have a video on it up in the next few weeks. Thanks so much and will definitely check in if we're ever nearby!

@ArjanGroe Рік тому

Ok this is amazing!!!

@kenlee224 Рік тому

Well done and keep on.

@burningbluejay2868 Рік тому

this is really cool! I didn't know powered up could run programs like that

@LegoGrandPrix13 Рік тому

Nice one. Does this work with the old power functions sets (60098)?

@ElenarMT Рік тому

Oh this is wonderful!!!

@cyberprog Рік тому

The PU Sensor is not as good as the Mindstorms/Education sensor. The light with it seems to increase the accuracy. I also coded something similar a while back before I saw your video, and I managed to make it work using just two colours. I just stored a variable for the speed of the motor and modified that every time I saw the colour. You could do more stuff with other colours then if you had more ports available!

@heaplabs 2 місяці тому

Great idea! I solved the same problem a while ago by having the train slow down before the track ends using a timer, and then bumping into rubber bands at both ends (for "recalibration"). But I was actually thinking of just replacing the whole thing with my own motor + micro controller, mostly because I don't want to deal with those AAA batteries all the time :/

@leejoey3287 2 місяці тому

To me, it’s perfect for a 3-stop Super-fast Express Route: Like 3 main cities and and you make green for the second stop platform, no colour for passing stations, Red and yellow at the terminal platform to prevent crashing on it

@balrogbean Рік тому

I feel like, if you were to have the train run on a giant looped track, then, all you would NEED, is the GREEN brick.

@cooljonathan Рік тому

I did not realize that the standard powered up hub was programmable. Way cooler than power functions!

@playerscobongameplay Рік тому

This thing remind me a train toy that my friend has with diferent signals, and when the sensor see that color it stops or reverse or turn on/off headlights and horn

@Charris2007 Рік тому

With Buwizz 3.0 battery and controller we control both Powered up and Lego Mindstorms motors.

@jeepdave Рік тому

UKposts needs more of your content :)

@SiddhantSadangi Рік тому

why do we need three different colors though? IMO two should do the trick. One color to stop at the station, and the other to reverse direction

@thegamingfez117 Рік тому

Amazing video! Definitely going to add this into my city too! Do you know if it’s possible for pybricks to change the direction of a switch track, using a powered up motor?

@eggybricks Рік тому

Nice, thanks for watching! I think that'd work! We don't have any switch tracks, but if we did we'd probably swap out the yellow lever things for a motorized gearbox - similar to ukposts.info/have/v-deo/oF1meqN-nY-rs6c.html but with a PoweredUp motor and Pybricks. That seems like a cool idea, we might try it!

@bmx_helisman8252 Рік тому

Nice! Would be cool if you coded it to accel and decel gradually.

@Broke298 4 місяці тому

It's crazy what some smart people can do with Lego 🤯

@marekhrivnacky7942 Рік тому

Amazing, how much hubs can be connected in same time?

@jochenvandevoorde437 Рік тому

Cool solution! But it's kind of mind-boggling that the color coded plates and detection come standard with the Duplo train 10874, yet for the Lego train you need to come up with your own solution (which, granted, can also be fun).

@pascalleclerc6667 Рік тому

thx so much i will do that for the city of my boys!!!!

@Cr3ator3ss Рік тому

Hi, this video is great and made me wonder if you would like to make another video on Mindstorms. I got the set recently, before the discontinuation was announced and now I am afraid I won’t be able to use it for long.

@eggybricks Рік тому

Great question! We've been meaning to make a Mindstorms video for a while because we're so sad that LEGO discontinued the line, thanks for letting us know you'd watch it!

@wile.e.coyote7666 Рік тому

Wonderful ! This can resolve my main problem being part of my future track is set up on shelves which are too narrow to make a loop. This is also of course convenient to stop trains at terminus railway stations. Good job ! ...my only concern is that you have to forget lights on the train engine as PU system only uses two channels, right ? Thx a lot for your work. Greetings from northern France !

@eggybricks Рік тому

Unfortunately, yes, we can't have lights on the train any more because we have both the sensor and the engine. Thanks so much!!

@Sonicjan 9 днів тому

What I'd REALLY like, is for the Train to actually play the sounds that one can hear through the App (like, the Horn, Whistle or Bike Ringing Sounds). Any way for that to be done?

@intimmydation Рік тому

This is so amazing wow! Thanks for sharing this I am definitely going to have to look into this as I start my city build out over @brickmerica

@stijnvth Рік тому

I never knew this stuff goes this hard. That's pretty cool actually. Maybe make a locomotive on both ends ... 🙂

@valkhorn Рік тому

The tracks are on an elevation right? Why not lower the right half behind the buildings, send it backwards, raise it on the right half, and send it across again?