Stronger and Faster: V8 Solenoid Engine
Переглядів 201,164
4 роки томуIn the past I have made a 1 cilinder solenoid engine and a V4 solenoid engine. They turned out really cool, but today I’m going to improve on it by making a V8 solenoid engine.
To improve it I not only double the amount of solenoids I’m also going to make the crankshaft on my cnc mill and use infrared sensors for the switching of the solenoids.
Specs:
- Voltage: 12V
- Spool wire used: 0,4 mm diameter
- Estimated wire length per spool: 40 meter
- Spool resistance: 5 ohm
- Max rpm measured: 1000RPM
Want to support The Practical Engineer? Get exclusive BTS and extra content:
/ thepracticalengineer
For more projects, build plans and other stuff:
www.thepracticalengineer.com
Check out the gear I use and recommend here: kit.co/ThePracticalEngineer
Also check out my other social media:
Instagram: / thepracticalengineer
Facebook: / emielthepracticalengineer
Twitter: / prctclengineer
Pinterest: / practicalengineer
@don_pavlov 4 роки тому
As long as the subtitles are great I am happy in any language.
@Thepracticalengineer 4 роки тому
That's great to hear! thanks!
@brianljh8982 3 роки тому
Yes, as long as there is captions, im ok with it.
@MarkR-wc2el 2 роки тому
Subtitles also have fails
@johndilig6719 2 роки тому
same. as long as the subtitles can accurately convey what you want to say, I'm good with it.
@Recked4Selfmarv 4 роки тому
I'm from germany and I am always amazed how much I understand when someone speaks dutch.
@klein320 4 роки тому
ReckedOne Wenn du aus der Schweiz kommst verstehst du noch mehr!
@Thepracticalengineer 4 роки тому
Haha cool to hear! it is the same the other way around. I lived in germany for a bit some years ago and I learned to speak it by just listening and then starting to talk the words I knew and fill it with dutch words with a german accent. People usually understood me
@unknownknife4993 4 роки тому
i take classes and realized that there is to much more to learn
@johannesn.4674 4 роки тому
Plattdeutsch aus dem Münsterland + etwas Logik ~ Niederländisch
@mr.redrhino4929 4 роки тому
Was ist "Dutch" auf Deutsch?
@Sychius 4 роки тому
While I can't understand or speak a word of Dutch, seeing you enjoy this vid so much makes it totally worth it. I say stick with Dutch. While I'm not personally a fan of reading subtitles usually, I can make an exception for your vids :P
@Thepracticalengineer 4 роки тому
Thanks Sychius! That is exactly the reason for switching for me. I think the extra joy translates into the video and makes it better overall.
@WorksbySolo 4 роки тому
Wonderful project! The Dutch works good. NEW T-SHIRT IDEA: “Don’t have a lathe?... Go buy one!” Love it!! :-)
@Thepracticalengineer 4 роки тому
Thanks Bernie! Haha that'd be awesome on a shirt 😂
@JohnMadeit 4 роки тому
That made me laugh 😆
@BearMaked 4 роки тому
Haha, I was going to say something very similar, Bernie!
@SonicBoone56 Рік тому
This is the coolest thing ever. Imagine if electric cars used this as a novelty engine for enthusiasts or restomodded classic cars.
@OnyxDaDragon 9 місяців тому
Hey, what if I said im trying to make that a thing? Well, atleast the electric cars using them.
@CardboardSliver 3 роки тому
I was looking up old V8 engines when I stumbled across this. Nice work mate, that's some serious craftsmanship!
@calvinb2408 Рік тому
I love when you have an idea, think it’s original, then find out it’s been done in this guys garage. Good to see it work as imagined.
@emi3966 4 роки тому
Definitely keep spontaneity and subtitles, definitely works. Keep up the good work. Thank you.
@theguyofthemonth 4 роки тому
This is an amazing project, nice job! 👍
@RegularOldDan 4 роки тому
Very, very cool. Honestly, it was not only fun to see your work but also to listen and see how many words are similar to English. Keep it up!
@s4nt497 4 роки тому
That sounds so cool. Amazing work dude!
@Thepracticalengineer 4 роки тому
Thanks! It does sound really cool!
@djjoris 4 роки тому
Ben naar hier gestuurd door Henk Rijckaert "De Koterij" en natuurlijk heb je een sub bij.
@reinoutghijs6469 4 роки тому
Ik ook!
@Thepracticalengineer 4 роки тому
Bedankt! Er komen een hoop leuke projecten aan ;)
@idevant 4 роки тому
En ik kom ook van bij Henk ... Toppie
@ti83magic 4 роки тому
Idem :)
@soetens1986 4 роки тому
Check, via Henk....
@UraFlight 2 роки тому
Amazing staff ! I was very glad to find your channel
@dutcheeseblend5458 4 роки тому
Gaaf! Mooi project! Je bent goed bezig, ik geniet elke keer weer van je video's 👍
@Thepracticalengineer 4 роки тому
Thanks Daan! Leuk om te horen :) Deze was ook wel erg leuk om te maken.
@dilipsolanki786 3 роки тому
You don't know , how much I love this engine
@etiennedupreez8110 3 роки тому
Hi, I love the videos! I am South African, and apparantly Afrkiaans and Dutch are similar, because i could understand most of the words you said!
@Ariautoace 4 роки тому
Dude. No amount of words can describe how amazing this is; in any language. Just wow.
@Thepracticalengineer 4 роки тому
Thanks! That's awesome to hear!
@bastiaanwesterbeek1775 4 роки тому
Super vet!!! Dit inspireerd mij heel erg om zelf ook dingen te maken!😍
@Thepracticalengineer 4 роки тому
Leuk om te horen! zeker doen :)
@JohnMadeit 4 роки тому
Nice work. This is absolutely amazing
@Thepracticalengineer 4 роки тому
Thanks John! This is one of those projects that turned out so nice that I can just sit and watch it.
@FredMcIntyre 4 роки тому
Really cool Emiel, awesome work! 😃👍🏻👊🏻
@Thepracticalengineer 4 роки тому
Thanks Fred! Glad you like it!
@bramkel 4 роки тому
Ik ben hier beland door De Koterij van Henk Rijckaert. En ik moet zeggen: dit is geweldig! Heel fijn om naar te kijken en zeer leerrijk! Groetjes uit het koude België
@Thepracticalengineer 4 роки тому
Hey, Welkom! Leuk om te horen dat je mijn content leuk vindt en dat je hier door Henk komt!
@BleughBleugh 4 роки тому
Do the videos in whatever language you like! I can read English and will watch regardless. Superb entertaining engineering, your enthusiasm rubs off onto others for sure!
@Thepracticalengineer 4 роки тому
Thanks! that's cool to hear!
@starfunsfs7730 2 роки тому
Wow beeindruckend Gut gemacht
@InfernosReaper Рік тому
I had this idea myself, but lacked resources. It'd nice to see it working.
@maxvanderhelm 2 роки тому
wat een super vet project.
@RazzaDazza0 4 роки тому
I like the idea of you switching to Dutch because it is easier for you but I would prefer if you instead spoke in Dutch and made a dutch version of your vid but in the same vid you did a voiceover in English and uploaded that instead so that way everything is still fast and you don’t have to think before you speak but English speaker fans can still understand you and listen without having to resort to subtitles, I understand that is more work for you though.
@Thepracticalengineer 4 роки тому
Thanks for the suggestion. I see your point and I have been (and still am) thinking about ways to also incorporate the international public. I do indeed have limited time so right now I'm focussing on this change. When that is established I'm going to look for the other options
@Tinkerz 4 роки тому
Dutch works fine especially given your explanation of why it's being done in Dutch. Thank you for the video!
@Thepracticalengineer 4 роки тому
Awesome! Glad you like it
@ChrisTheGregory 4 роки тому
If speaking Dutch is more comfortable, I say go for it! I also like having subtitles instead of a voiceover or dubbing, because hearing the words while reading the translations is a great way to start learning to understand a language.
@Thepracticalengineer 4 роки тому
That is very true! As a kid I was always watching english movies with subtitles to learn to speak the language :)
@thetinkerist 2 роки тому
Emiel kerel, je bent een held, erg mooi werk
@Thepracticalengineer 2 роки тому
Dankjewel! Leuk om te horen :)
@ThaboW11 2 роки тому
Great stuff.
@eexmann 4 роки тому
Heel fijn dat ik je gesproken woord helemaal kan volgen, sommige Engelse termen staan niet in mijn persoonlijke woordenboek, dus bedankt.
@Thepracticalengineer 4 роки тому
Graag gedaan! Ja zeker de technische termen kunnen wat verwarrend zijn. Het bevalt mij prima in het Nederlands :)
@wachindeboca149 4 роки тому
Hola! No se si lo recuerdas pero hace un tiempo tenias una gran comunidad que hablaba español, soy de los pocos que siguen aqui y queria decirte que me encanta tu trabajo
@bestbuildpc 2 роки тому
Amazinggggggggg! I love it!
@WeekendBuilders 4 роки тому
Weer een pracht video afgeleverd Emiel! Leuk dat je ook bent overgestapt naar het Nederlands👍
@Thepracticalengineer 4 роки тому
Dankje Tim! Ja, het was even wennen, maar ik ben er wel van overtuigd dat dit beter is. Het bevalt mij in elk geval erg goed!
@favouremmanuel8876 3 роки тому
I'm sad you said Electronics is boring.. it's very interesting for me and an awesome course... Though trouble shooting problems can be a hassle for some people, but it's also a nice time to learn alot..
@nailsaggitarius4212 3 роки тому
Very good! two questions: 1) How to make solenoid stronger 2) how make solenoid moving in steps
@MrZeroinside 4 роки тому
Nice work jerry
@thewizard1196 2 роки тому
This in my 1/14 scale rc semi 👌🏾
@richardfox5364 3 роки тому
I just found your video. IT IS AWESOME! Subscribed and liked.
@FrenkJanse 3 роки тому
Superleuk Emiel. Hier ook een fan van Adam Savage. Erg fijn om te zien dat je ook je foutjes laat ziem. Subbed !
@Thepracticalengineer 3 роки тому
Leuk om te horen Frenk! Ja foutjes maken hoort er bij :) Een goede maker is goed in problemen oplossen, niet in alles in een keer goed doen ;)
@firdauszainudin7118 2 роки тому
JerryRigEverything Dutch style. Love your content, man.
@henkrijckaert 4 роки тому
YES! Een ander maker-kanaal in het Nederlands! Cool project, Emiel!
@Thepracticalengineer 4 роки тому
Hey Henk! Jaaa! ik ben heel blij met de switch! Dankjewel, het was een hoop priegelwerk, maar was het zeker waard!
@kemdust 4 роки тому
Henk, je weet nu wat te doen, ondertittels in het engels.😁
@RickTizzy 4 роки тому
your english vids are just as great! Die hebben ook mijn vookeur in alle eerlijkheid :D
@Thepracticalengineer 4 роки тому
Dankje! wat maakt dat die de voorkeur hebben?
@RickTizzy 4 роки тому
@@Thepracticalengineer Omdat je het vraagt dan... Nederlands is naar mijn idee over het algemeen een nuchtere en soberder taal. In het engels kom jij dan ook veel expressiever en levendiger (en daarmee toegankelijker) over is mijn mening. Als je dat zou proberen over te nemen in het nl dan zou het denk ik gemaakt over komen ipv de enthousiasme die je in het engels overbrengt. Hoe dan ook, je content is nog altijd erg vermakelijk ongeacht de taalvoering, dus doe gewoon lekker je ding en waar jij je comfortabel in voelt zeg ik. Dan hebben we er allemaal lol in :D
@mel_163 2 роки тому
mate this is a wonderful project, i am so curious about these engines i want so much to build one of these and test it, maybe even trying it on a rc airplane
@SwiftsReborn 3 роки тому
The subtitles are great, had no issues. id say speak a language you're most comfortable with
@xavimourelo 4 роки тому
Don't worry about switching languages if you are more comfortable, I don't know dutch but I enjoyed the video, so if you did too while making it that's even better :)
@Ernzt8 4 роки тому
Ik vind het een prima keus om het in je moerstaal te doen, je geeft zelf de reden al aan waarom. Met goede ondertitels is het toegankelijk voor iedereen, een extra versie met Engelse voice over zou ook nog kunnen. En o ja, die nieuwe draaibank zet ik gewoon in de woonkamer ;)
@Thepracticalengineer 4 роки тому
haha, ja de woonkamer lijkt mij een prima plek ;)
@owenroth5686 4 роки тому
I speak English but subtitles won't stop me from enjoying these videos
@Thepracticalengineer 4 роки тому
Thanks that's good to hear
@ManCrafting 4 роки тому
Very cool project Emiel! Enjoyed watching this in-spite of the fact I’ll likely never attempt this. Really enjoyed hanging out and chauffeuring you around in Atlanta. As for Dutch. I grew up watching Chinese martial arts films. All sub titles. I adjust relatively quickly. It might be fun to have a Brit to overdub one of the videos as a collab. 🤣
@Thepracticalengineer 4 роки тому
Hey Chad! Glad you don't mind the videos being in Dutch. After being around the cool international community last week I had some doubts. But it seems to be all fine. It was nice meeting you and hanging out at WorkbenchCon!
@DodgeVendetta Рік тому
Tof project man, groetjes uit België. (perfect te verstaan) :b
@Thepracticalengineer Рік тому
Haha, gelukkig maar!
@user-vr8xv5jz7r 3 роки тому
Je Nederlands is helemaal top
@ddpgokchinees839 4 роки тому
Nederlandstalige maker video's zijn altijd een aanrader
@Thepracticalengineer 4 роки тому
Goed om te horen! Ik hoop wat bij te kunnen dragen daaraan
@ddpgokchinees839 4 роки тому
@@Thepracticalengineer Dat is je bij deze alvast gelukt. Bedankt
@BearMaked 4 роки тому
I don't mind the subtitles. And I have no idea how any of this project works (no engineering experience at all for me), but it was fun to watch you build it!
@Thepracticalengineer 4 роки тому
Hey, That's great to hear. i'm glad you enjoyed it
@oenieke 4 роки тому
Prachtig compacte werkplaats :) En boeiende content ... dubbel op ! :)
@Thepracticalengineer 4 роки тому
Kijk dat is leuk om te horen! Ja de werkplaats is zeker compact. Dat is soms best een uitdaging met filmen
@oenieke 4 роки тому
@@Thepracticalengineer meer doen met minder, knap
@luchoportuano3272 4 роки тому
Im from México and I like your videos, it does t matter the language
@Thepracticalengineer 4 роки тому
Thanks thats great to hear!
@eatenkate 4 роки тому
Conclusies: 1) Je bent nóg gezelliger in het nederlands 2) Zo leer ik eindelijk ook eens wat al die dingen in het nederlands heten, ik leer alles over hout/metaal/CAM van youtube, in het engels en woon al meer dan 10 jaar in het buitenland en dan pik je niet zo makkelijke nieuwe nederlandse woorden op, dus ben superblij dat je dit doet!
@Thepracticalengineer 4 роки тому
Dat is goed om te horen! Ik ben er zelf ook erg tevreden over. Ik leer zelf ook het meeste online, dus ik zal ook af en toe wel wat specifieke woorden moeten opzoeken ;)
@o.schavemaker5615 3 роки тому
Geweldig! Heb je ook de plannen/bestanden om het zelf te kunnen maken?
@brianbudd8487 2 роки тому
How hard would it be to scale up and use mass produced parts like the connecting rods for a weedwacker or model aircraft engine parts?
@Rouverius 4 роки тому
Supergaaf! Great job!
@Thepracticalengineer 4 роки тому
Dankjewel Rouverius!
@pieterbonten7301 4 роки тому
Henk crew, ook echt een super nice video
@Thepracticalengineer 4 роки тому
Hey! Wat gaaf dat je via Henk bij mij terecht gekomen bent!
@louloutb56 4 роки тому
Bravo superbe travail .
@Thepracticalengineer 4 роки тому
Thanks Jean Louis!
@Makebuildmodify 4 роки тому
Heel fijn! Hou ervan!
@Thepracticalengineer 4 роки тому
Goed om te horen!
@akal1k0 2 роки тому
Do you have a way of measuring how much torque its producing? If you added a drivetrain and wheels, could it move? Looks awesome btw!
@afiqkarnain 3 роки тому
man, you really made it, v8
@PeterLunk 3 роки тому
Ontdek net pas je kanaal... En was juist blij verrast iemand te zien die in het Nederlands zijn videos maakt. Ik spreek zelf prima Engels dus wat dat betreft maakt het mij persoonlijk niet uit. Maar ik vindt het wel veel educatieve waarde hebben juist voor Nederlandse jongeren die de engelse taal niet goed machtig zijn. PL.
@Thepracticalengineer 3 роки тому
Hey Peter! Sorry voor de veel te late reactie! Leuk om te horen! Ik vond het zelf inderdaad jammer dat er maar zo weinig nederlandse makers zijn vandaar dat ik de switch gemaakt heb.
@estebanprieto6574 4 роки тому
Hi, how are you i hope you're fine. I would like to know if this kind of engine is more and ic engine or a electric engine as his power efficincy by constances at rhe rpm, also by all his moving parts and also if it can mount gearbox or its unnecesary
@embain269 4 роки тому
I'll keep watching either way, your projects speak for themselves, one small request, dont talk so fast if your gonna switch I can't read that fast, lol
@Thepracticalengineer 4 роки тому
Thanks! that is nice to hear! I'll do my best to slow it down.
@safetyinstructor 4 роки тому
I don't mind you switching to Dutch since I as a German can still understand it. Keep up this great content! 👍
@Thepracticalengineer 4 роки тому
Haha, It works the same the other way around! Being Dutch I can follow most German conversations
@EPJXM Рік тому
what kind of part are you using to control the motors? (the mosfet part)
@crashweasel 4 роки тому
Much love of a ' de koterij' viewer :)
@Thepracticalengineer 4 роки тому
Hey thanks! welcome to the channel.
@mandog2142 4 роки тому
Zeer innovatief! En cool.
@Thepracticalengineer 4 роки тому
Dankjewel! Ik ben er ook heel blij mee hoe hij is geworden. Het is een mooie eyecatcher
@victormanuelhernandez457 3 роки тому
12:01 Nice job. your face of satisfaction and happiness haha greetings
@seunghoonkang5613 3 роки тому
Your video is touching. What kind of product did the infrared sensor use? Recommend the link.
@JF_Projects 3 роки тому
Gaaf hoor, maar hoe kan je de rotatie snelheid veranderen ?
@DennisRayWingo 4 роки тому
Very interesting! Question. Did you do any diagnostics on this to see what the current draw is on average for the system?
@Thepracticalengineer 4 роки тому
Hey, Thanks! each solenoid pulls about two amps or a bit more. there are always two solenoids engaged at the same time, and sometimes 4 so it draws between 5 and 10 amps
@dorenzahid5244 3 роки тому
This guy is like the solo hacksmith
@kiraditt523 4 роки тому
I love that your doing videos in Dutch since I'm trying to learn it slowly and I can somewhat understand it cause German. And subtitles are fine for the rest. However maybe put the subtitles In the video directly since how UKposts does It, it Sometimes covers important parts. And it would be really great if the timing and splitting were a bit better since it's really hard to follow like this at the moment. I don't know how your currently making the subtitles but if you're in need of a good program Aegisub is really good. I can't see if you have it enabled or not but I think there is an option for the community to create subtitles in UKposts.
@Thepracticalengineer 4 роки тому
Thanks for the elaborate answer! I'm working on improving my subtitles. I did them myself this time and it can be quite the challenge to get all the timings right. They will improve in the future.
@TheIrishdriven 2 роки тому
Can you set it so that polarity of rack solenoid switches so that it pushes and pulls that would increase efficiency torque and balance
@PROGAMER-qm7lu 2 роки тому
What's the difference bw copper wire and insulated copper wire ???? And also what kind wire is used in motor coils ???? Is it insulated copper wire or just copper wire
@capitalz6566 3 роки тому
Echt een dikke werktplaats man 👌👌👌
@Thepracticalengineer 3 роки тому
Dankje! Ik ben er ook heel blij
@MrCrankyface 4 роки тому
Great project! I can really relate to the spontaneous thing with the languages. I also feel like I get constrained or "stiffened up" when talking in English. I find it a bit harder to follow along when I have to constantly read subtitles though.
@Thepracticalengineer 4 роки тому
Thanks for your feedback. I think a non native language will always have a bit of a barrier compared to native.. What would make it easier to follow it for you?
@leshyborovoi 4 роки тому
The time for the subtitles are to short. There is not enough time to see the actual process.
@LukeNixsound 4 роки тому
Cool video. Dutch is no problem if we have subs, I'd rather have more content, so I'm happy to watch
@artuur1820 4 роки тому
Nice man!! Groetjes een belgische kijker!!
@Thepracticalengineer 4 роки тому
Hey Welkom!
@WillaLamour 4 роки тому
Awesome!!!!!
@Thepracticalengineer 4 роки тому
Thanks!
@rozhmahmood8398 Рік тому
You must to rotate the engine in the first time ? Is it self starting ?
@bricology 3 роки тому
Another great video! Is there any way to measure the power the engine produces (in torque, fractional horsepower, Newtons, etc.)? Bij voorbaat dank!
@Thepracticalengineer 3 роки тому
There are probably multiple ways. If I was going to do it I would put a wheel to it and see how much energy it generates when stopping it with the wheel. However I now measured it by hand and determined its not a whole lot.
@vadim9342 Рік тому
Now let's make them full sized and hopefully Ford, Chevy and Dodge can keep the V8 alive in some way :)
@cogitoergosum3138 Рік тому
COOL!😎
@svenmagnusflubiproducties 4 роки тому
veel succes met het Nederlands!!
@Thepracticalengineer 4 роки тому
Dankje! Gaat best oké toch?
@ada_unknown_2738 2 роки тому
When you came for the electrical and electronics part and he says that's the "boring" part... *cries in sadness and understanding*
@WJCTechyman Рік тому
I got the gist with just watching your video as I could figure it out. That said, I'm not experienced in Germanic languages besides English as most of my experience living in Ontario, Canada so we are more exposed to the Romance languages (particularly French and Spanish). Ironically, I'm 3/4 German heritage, since three of my grand parents were of German heritage by their family or maiden names. I digress, I felt a bit of pain watching your endmill bit snap and thinking of times where I've had that happen with drill bits boring into metal. I've always liked the sound of these engines as they kinda have that Diesel or fast rotating steam engine sound.
@CrazySD1993 4 роки тому
"For this kind of work a lathe is very easy. If you don't have a lathe and you still want to do this project... Just buy one." XD
@Thepracticalengineer 4 роки тому
Life advise 😂
@pradipprajapati329 3 роки тому
Sir can you tell me how much power is generated by this engine and also rpm
@mienmoeke 4 роки тому
Nederlands komt bij mij natuurlijker en prettiger over. Eventueel een voice-over in een 2e filmpje voor de Engels sprekende medemens zou een idee kunnen zijn.
@Thepracticalengineer 4 роки тому
Goed om te horen. Bedankt voor de tip. Dat is nog wel een idee inderdaad.
@DelanAbbas 4 роки тому
I loved the Dutch!
@Thepracticalengineer 4 роки тому
That's awesome to hear!
@survivaldude29 2 роки тому
I have a question so if I were to use this in an actual vehicle would I need to give you credit
@fernandogarridomontes4158 4 роки тому
Me gustó mucho
@w.dkalyan6234 3 роки тому
Namaste 🙏sir your videos are so much encourage to do like this engines sir collect all material but i dont know what circuit board used i🤔 if you don't mine please tell me sir
@w.dkalyan6234 3 роки тому
I want to become your friend please... 🤝
@neergnnud2136 Рік тому
You thought about making a AC motor run the motor while the spark make the resonance charge or the motor load power ground for the block and over unity motor in transmission to make it work like a gyro
@TravisTerrell 3 роки тому
So freaking cool. I sometimes wish I had chosen mechanical engineering over software.
@Thepracticalengineer 3 роки тому
That would have been the better choice ;)
ABC7 News Bay Area
Переглядів 41 млн
Р@ССИЯН ПРИВОЗЯТ ПО ЧАСТЯМ! Он пойдет на войну, умрёт, а я куплю квартиру и оденусь/Золкин, Карпенко
Апостроф TV
Переглядів 1,7 млн
НОВОСТНИЧОК
Переглядів 890 тис.
Жекич Дубровский
Переглядів 2,2 млн