I'm glad to hear that. Happy RC to you 😊

Do you have a link for the parts please?

I'm glad that it's working out for you.

Thanks very much for your comments!

With the 0.1mm shims for the lower arms do you no the inner diameter hole? I have all yeah racing bits and find the slop is quite bad on the rear

You are more than welcome! Thanks for watching.

Thank you for subscribe to my channel and good comment. Wish you best of luck, and everything work out for you well.

Actually in this orientation, as with your Escort they are tension struts. Compression struts would run from the suspension arm rearward to the chassis. They work wonders on Escorts, as you are no doubt aware. You can also lower the front attachment point slightly and gain an element of anti dive.

Thank you!!

Thanks my friend! These are Tamiya shocks that I bought 25 years ago in Japan.

I'm glad that you realized that lol

lol Thank you!

Thanks very much my friend!

Thanks for your comments! Have a merry Christmas!

Thank you! Those are Tamiya’s

@@simpleisthebest73 Thanks, Anyway you can find the part number for those?

@@victortakeda9338 these are bought more than 20 years ago… sorry..

How come you installed the dampers upside down?

It was some Chinese after market part that came with blue aluminum knuckles, but ball bearings weren't fit so I just ended up using O ring spacer which is same as that you use for TT02 kit

@@simpleisthebest73 trying to figure out what I can use to connect it to the knuckle without the having the part you have.

Good point!

Thank you friend!

I’m building the 1/10 Subaru Impreza 99 Monty Carlo as we speak and I’m to the part where the shocks are assembled . I absolutely could not believe what I was putting together ...I’ve never seen in all my 42 years “ new bright “ shocks on a Tamiya rc or any hobby grade for that matter . Am I crazy or are these things junk ? Won’t even lock together right witch leaves slop witch hinders drivinig witch risks a good curb or parked car collision ... sorry fail bullshit Tamiya wtf . ( I rebuilt em with traxxas parts ) are all TT-02 chassis come like this one ?

コメント有り難う御座います！私自身もノッキーさんの動画をいつもご覧に頂いって降ります。この仕様はキャスターにも影響されます。

Lowerling cg but it has a oil leak problem.

It's just the normal one that come with the kit. I'm not sure if I answered your questions right.... sorry if that wasn't help..

@@simpleisthebest73 also where did you get you tie rod that attaches to the bumper? I like your set up. I have the rcaidong steering upgrade but still some play from the friction balls in the arms

@@brentg2642 those are just leftovers from other Tamiya RC kits or Tamiya Hop-up parts.

It’s from aftermarket TT02 Steering knuckle arm set, but ball bearing didn’t fit so I just use the spacers

I just copied some other drivers too. I think it help reduce oil leaks, and it look different! It’s cool to be look different lol

I’m sorry.. I don’t have the spec of the tires.. I believe they’re med narrow Chinese aftermarket parts

5mm ball connector/ 25mm, 15mm turn buckle end..

Thank you for your help! One more question..as you were showing your steering adjustments above and underneath what size bolt nuts and screws did you you use to make it more solid?

@@Syx696 it's a tap screw from hardware store just found in my tool box, and nut is from DF02 hop up parts aluminum oil damper set. Just extra parts from it. You can find anything that fits. Whatever it works. Good luck friend! 😉

Thanks again my friend!!

Thanks for the advice. I will reverse it again if I ever get in any sort of race.. lol

Its a toy mate.

Why would it hurt the performance?

@@TheBod76 Sprung weight vs. Unsprung weight.

Yes, exactly! That's why I came out with this idea.

コメントありがとうございます！　そうかもしれませんね。。

イベイーで買った物ですが、中国産だと思います。ご視聴有り難うございます🤗

Thanks! I will keep that in my mind 😌

I thought it would help to store it for long time.. not really sure it will work..

@@simpleisthebest73 thanks

It's from Inshot app. Music: Shave musicians: Marco Lazovic

These are all just leftover parts from my other RC kits. Plastic spacer is from CVA damper parts, and I use long hollow screws or cut off screw head as turn buckle linkage, and just need some ball connectors.

Whats the blue aluminum called that you have connected?

@@evanmehlhose6793 don't worry about that. That blue front upright spacer came with Chinese aftermarket aluminum front upright, but ball bearings didn't fit. So, I just only use spacer. You can just use plastic parts came with the kit.

@@simpleisthebest73 Oh I see I’m just a sucker for that shiny aluminum haha is this the set to buy? Than just get some 5mm ball screws? www.ebay.com/itm/Tamiya-54556-FRP-Front-Damper-Stay-Set-TT02B/153991356664

Thank you for your quick feedback what exactly did you do for mounting up the front?

こんにちは。特にやり方と言っても。。ただ余ったタンバクル部品やCVAダンパに残ったスペーサーを組んだものなので。。すみません役に立ったなくって。。

@@simpleisthebest73 ありがとうございます😄チャンネル登録しました。

@@user-gv4vx7nc1w ありがとうございます😊

There is nothing to be learn lol