The Anycubic Vyper 3d Printer Is SERIOUSLY Impressive
Переглядів 178,263
День томуLove the channel? Consider supporting me on Patreon:
www.patreon.com/user?u=806627
Join the official ModBotArmy discord server: / discord
In today's video, we take a look at the Anycubic Vyper which is the latest release from Anycubic. This printer is a massive upgrade to their previous line of Mega printers and is packed with features. We will take a look at the specs, set up process, print quality, and I will give you my final impressions of this printer.
Find out more or preorder the Vyper here:
www.anycubic.com/collections/...
Models used in this video:
Rancor model:
thangs.com/ChaosCoreTech/Star...
Aztec Temple Planter:
www.thingiverse.com/thing:486...
Screw Sorter Box:
www.thingiverse.com/thing:487...
Iphone SE cases:
www.thingiverse.com/thing:147...
www.thingiverse.com/thing:154...
Soldering Wire Fingers:
www.thingiverse.com/thing:172...
Screw and Bolt Sorter:
www.thingiverse.com/thing:345...
(´∀｀)♡ As an Amazon Associate I earn from qualifying purchases:
Buy now on Amazon: amzn.to/2jQAOgV
Subscribe To My 3d Printing Blog! :
Lets Get Social!
Facebook: / dopesoner930
Twitter: / dopesoner930
Instagram: / modbotarmy
Twitch: / dopesoner930
Music provided by Argofox:
NEREUS - Lotus
• NEREUS - Lotus [Argofo...
@RCPlaneAddict 2 роки тому
This was a solid review, and I appreciate you taking the time to really get into all the details without overwhelming us with technical terms that would probably confuse and turn off new or soon to be new to the 3D printing world. Thanks again, and cheers.
@zombietwostep 2 роки тому
this was a really helpful revieew, actuially convinced me to pull the trigger on the purchase. Thanks from the UK.
@Mr.Titanium1911 2 роки тому
Because of this review, I just ordered a Anycubic Vyper. Thank you for your honest feedback.
@Mdbunn2013 2 роки тому
Great review. We will probably see tones of upgrade for it in the near future
@Zachary3DPrints 2 роки тому
I did order this printer in presale, I'm excited for it. Great video!
@ModBotArmy 2 роки тому
Awesome it is so rad. 🙌
@SamTornado1701 2 роки тому
Thanks man, great info. Thanks for all your hard work!
@ModBotArmy 2 роки тому
❤️
@justinleos3789 2 роки тому
This channel has the best reviews. I'm only upset that I didn't find it sooner!
@ModBotArmy 2 роки тому
❤️
@SamTornado1701 2 роки тому
@@ModBotArmy I found it by accident a long time ago, back before he was doing 3d printer stuff. I thought my Xbox 360 was toast, found this channel, taught me how to fix it, and I was back in business! I was going to by a new one, but he saved me some $$$$
@artemcultura6191 Рік тому
Nice review! Just bought 3 of these to add to my farm!
@canonhd1000 Рік тому
great review💥💯. Nice speech and rhythm and needed facts😁
@Mikeytheloser1524 2 роки тому
I’ve been on your channel since the mono price mini and your mini head you printed with your JG aurora, I’ll never forget that live stream, good times🥺🥲🥰
@Killa_Prints 2 роки тому
Great review Daniel. Makes me want add a mate to my CR-6 SE
@chxselive9161 2 роки тому
I think i’m gonna grab this as my first 3d printer! I was leaning towards the Biqu B1 but this review won me over!!
@nickmills1628 2 роки тому
i just ordered mine lmao
@redwraith6576 2 роки тому
Thank you for the very detailled test! Really great and informative! Have the i3 mega, which will be sold in favor for the vyper. Already preordered it, hopefully it will be shipped on 30.06.
@liraco_mx 2 роки тому
Is your i3 bad or you just want to replace it for a newer one?
@redwraith6576 2 роки тому
@@liraco_mx the i3 Was fine, but I had not enough space for All the Printers. Currently I have 4 Printers and a cure and wash Station. Meanwhile I also got the vyper and it was impressive.... Until it failed. I am one of the victims of the Level sensor issues and also my y Motor Mount failed.
@liraco_mx 2 роки тому
@@redwraith6576 yikes. Thanks for the feedback. I'm considering the Ender 3 v2 as my first printer at this point.
@redwraith6576 2 роки тому
@@liraco_mx the ender is good, but also has its flaws. Perhaps you should also consider the eryone er20. If you want to tinker or Upgrade the ender is an extremly good base to Start with. Mine has nearly nothing to do with the Stock Model anymore.
@natcole2629 2 роки тому
Good review. Nice clear and concise. Looks like a pretty decent printer for the price. If I was just starting out, this might well be my first choice.
@jean-claudeterretaz7464 2 роки тому
just order one this morning ..good review thanks , im glad you are using Prusa slicer ..My Mac Book are as the same bug with Cura ...I prefer Prusa
@diemrcupcake 2 роки тому
Just bought one for $335 on newegg. Im so exited to get this thing! We use Ender 3s in my engineering class and thats what got me interested. After debating for months i finally got a printer.
@123wordbird321 2 роки тому
Can this print carbon fiber pla? maybe with a hardened steel nozzle?
@denniswitthuhn2277 2 роки тому
yeah, your gonna wish you had gotten an ender3.
@brettshrekington 2 роки тому
How’s it been? Thinking about buying one
@diemrcupcake 2 роки тому
@@denniswitthuhn2277 actually i don't. I really dislike my schools ender3s and im glad i got this. Had 0 issues so far.
@diemrcupcake 2 роки тому
@@brettshrekingtonloving it right now
@BrentBlueAllen 2 роки тому
I’m upgrading from a MP Select Mini v1 and am excited to have a *much* larger build volume and nicer bed leveling experience.
@avejst 2 роки тому
Interesting printer Great points Thanks for sharing your experience with all of us :-)
@upperechelon3456 2 роки тому
Thanks...Great review. Subscribed.
@AlyWhits Рік тому
I'm new to 3D printing and was really confused what to get. Thank you for a great review. Just ordered one. Now to figure out what brand of filament to use. :)
@robingingras 2 роки тому
I just did a full set of Voron parts on my Vyper. Solid printer.
@Lusanagi 2 роки тому
This is what I have been waiting for! I've heavily modded my Anet ET4 to be somewhat like this: 32 bit open source board, silent drivers, belt tension (it's unbelievable that it has none as stock), v6 with bimetal heatbreak, Capricorn bowden tube, abl, spring steel sheet (had to replace bed AND carriage because it was weird, and that brought to reroute the y axis belt) and anti backlash; and aside from the money the time consumed has been like a year. Having ALL this stock is like a godsend, I think the only things I would change are the bowden tube for a Capricorn and a bimetal heatbreak
@kelle500 2 роки тому
Hi! I'm exactly in the same boat as you and am deciding between ender 3 v2 and vyper. Are you happy with with your decision to go for the vyper? :)
@ameliabuns4058 2 роки тому
some smol advice: I add -0.1mm to -0.5mm detraction length to my slicer with volcano hotends. i also reduce temp by 10c. that doesn't seem to affect my part strength
@jon9947 2 роки тому
Heck yeah! I was really happy to see this video, I have been following this printer for a bit, so it was amazing to see you do a video on it so early. I never preorder anything, but I am pretty sure that this will be my next printer when it reaches Amazon. I have seen a few reviewers print PLA at pretty fast speeds. Being a Volcano style hotend it should also be much easier to swap out to an all metal hotend than the cr-6 se. Which btw, really glad to see you didnt compare it to that printer, too many people have been. Yeah, it shares a bit in common with it, but it is not a clone like everyone assumes it is.
@Dusty2455433 Рік тому
Is it worth $379?
@jon9947 Рік тому
@@Dusty2455433 Probably not now, the printer is getting a little older now and there are plenty of other good options out now. With that said, I have seen it go on sale a few times for less than $300, and if you can find a good deal on it then it may be a great printer to grab.
@lilgnono 2 роки тому
15:55 love the back ground music while we try to listen to the imaginary popping noises.
@marksatterfield3100 11 місяців тому
I put a buck converter between PSU and MB fan. I adjusted the pot on the converter until I achieved a noticeably quieter fan yet still producing good airflow. The machine is SOOO much quieter
@ShaunBrown8378 Рік тому
I just purchased this same model and they now have a Vyper profile in Cura.
@ThreenaddiesRexMegistus 2 роки тому
Great review! It’s pushing me toward buying one of these. I have a heavily modified i3 with direct drive and this is about to receive a volcano hot end. I’m also not crazy about the original Ultrabase bed as the surface is prone to damage and the adjustment is a hassle. This printer improves both issues and I’d like a bigger build volume. It’s going to be a choice between one of these or the Chiron, which is now available cheaply and has substantially increased print volume. I’ll hold off until next year before pulling the trigger.
@miketaylor8771 Рік тому
did you ever make a decision?
@ericshell2010 2 роки тому
I had an anycubic i3 mega s printer. Had trouble with the print bed kinda warping near the center or it not actually heating properly. (Not sure, I'm as newbie to 3d printing as you can get) I ended up buying this because of the auto leveling (I have nerve issues making it difficult to turn those knobs underneath the build plate at awkward angles) I did my first 3 prints including benchy using prusa slicer with the same profile as my i3 and they came out absolutely flawless! An icosahedron with numbers, infinite cube, and benchy at max resolution. Can barely see any lines at all! So much quieter as well, so I can print while I sleep no prob. About to try out tpu for the first time, so we'll see how it goes, but I am quite satisfied with my vyper so far.
@mikecasista 2 роки тому
I have been doing a ton of research on features / sizes and find your channel extremely useful!!! I want to purchase my (first) 3D printer, but know that I want to be able to print NylonX (either out of the box or through upgrades). with the most recent batch of printers, would you recommend this printer over the Ender3 or is there another printer you would suggest I look at with prices less than 500$ US with good build volume capable of NylonX printing??? Thanks in advance and please keep the amazing content coming!!!
@oliverm6286 2 роки тому
The high pitch sound should be the PWM signal when it is not running at 100% fan speed. If you set it to 100% fan speed, the sound is gone. Nice video, thank you! :)
@PauloRogerioAlmeida 2 роки тому
Anycubic rocks, my i3M still running gloriously after all mods I have made...
@coilockerfpv 2 роки тому
Same here! I love my i3M!
@pieyed1302 2 роки тому
Great review! Nothing beats a no BS review. As Sergeant Friday used to say, "Just the facts, ma'am"
@SamTornado1701 2 роки тому
Couldn't agree more!
@ModBotArmy 2 роки тому
Thanks Tom! I appreciate the kind words.
@Formattednate-el8up 2 роки тому
Got this printer brand new for 150 Canadian, can’t say I have anything to compare it to. But it is super easy to use and works awesome. Would recommend
@GaryMcKinnonUFO 2 роки тому
Excellent review, mine arrives next week, liked and subbed.
@brmakers 2 роки тому
What you experienced in the petg could be a litle bit of moist but the real problem is the material touching the hotend for too long. I talked about tgis in my channel... BG just sent me a Vyper to test and I always watch your videos before asking for a Printer... Thanks for your work and best regards from Brazil.
@RebelScum409 2 роки тому
Just picked one up for sale on Amazon for $250ish. Cand wait to try it. I've got an ender 3 that I just can't get setup smoothly. Gonna sell it and move on to auto leveling.
@tibicsek1 Рік тому
Super video ! Would you recommend this printer or the Creality Ender 3 S1 Pro?
@debonh3828 2 роки тому
That was a very good review. Looks like very good value out of the box. adding the features to an ender 3 would cost more, plus all the messing about with firmware etc..
@ModBotArmy 2 роки тому
Yeah my thoughts exactly! Thanks for watching 😬
@StewsChannel 2 роки тому
Good review. I really like the flex bed plate and the auto level. Print quality though, I think my i3 Mega S actually does a little nicer job. Still, nice to see Anycubic is still innovating and improving, gotta like that! :)
@WhatTrigger 2 роки тому
most likely just need to sit down and spend time with slicer settings to pull the best of it out. My old I3 mega S was a completely different printer after calibrating the stepper motors then got better just spending time doing little test prints playing with settings.
@aberodriguez4149 11 місяців тому
Great review I have a Ender 3 Neo and those springs on the bed when they need adjustment drives me nuts.
@goffsgaming7032 2 роки тому
Could you do a video on what slicer you use besides cura and how you put the viper specs on it? I just got one for my bday and I’m trying to learn!! Thank you
@marsgizmo 2 роки тому
great review! 😎
@ModBotArmy 2 роки тому
Thank you 🙏
@mementary32 2 роки тому
@@Jin-Ro did you watch the video
@YGG_Y 2 роки тому
@@ModBotArmy hey is therr anywhere i can find your cura profile. Im having trouble with my vyper
@felurianmasters4369 2 роки тому
@@ModBotArmy i feel like you should have tried the stock profile lol
@shaark_1396 2 роки тому
@@ModBotArmy would you recommend this or the cr 10 smart? I like the cr 10 smart design better but if it won’t work well then I want this one. Thanks!
@LaszloBazso 2 роки тому
Thank you for the video. Would you happen to have any video on how to get rid of the strings on my prints for the Vyper? Thanks!
@maximusgaming3122 2 роки тому
Ive had many prints stop mid print due to filament sensor malfunction. I updated the firmware and still experience it. Most times I just hit print resume and it might come back with the warning but at times it will continue to print for half a day before the error comes back.
@repeters1 2 місяці тому
Great review! As this video is about 2 years old, I was wondering if you have tried to print with any ASA filament? I know it takes more heat to print with ASA and I was wondering if the stock heater would allow the extra heat. I'm concerned if the tubing will start to melt causing toxic fumes like my Mega X would do if I go over 240 degrees. Also, have you done any upgrades on this printer since this video? Thanks, Pete
@DennisKamauVisuals 8 місяців тому
Hello, great content. Do you think Anycubic Vyper could print prosthetic legs?
@Z-add 2 роки тому
The most important part of any budget 3d printer is its community support and third party upgrade parts which is most available for creality and prusa line of printers.
@redline6871 2 роки тому
A good printer doesn’t need upgrades.
@Z-add 2 роки тому
@@redline6871 that depends on your definition of GOOD.
@KellyMurph 2 роки тому
Thank you for this. I've decided to let go of my Enders and switch to this one. I just got tired of all the tinkering I had to do from time to time.
@pawgoon7432 2 роки тому
Did you have to use any adhesives when printing the different filemants on the included build plate?? Thanks for this Informative Review!
@ModBotArmy 2 роки тому
None at all! The PEI was great with no adhesives. Thanks for watching 😬
@Jester0153 9 місяців тому
So what's the fix for the volcano extruder stringing? Besides retraction, could you lower the temp overall?
@jeffersonderrickson5371 2 роки тому
Ordered mine monday as my intro printer. I am so stoked to make some nerf mods.
@mcorrade 2 роки тому
Dude I can't believe you've gone to the dark side.......Prusa ugggggg lololololo Great vid as always. Just a thought; when I did my Prusa vs Cura tests using the same settings on both, the prusa slicer prints had stringing and the cura didn't.......Not sure if its just my setup but I really tried to get the stringing under control with the prusa prints and no go. I have a friend who's buying his first printer and I think I will still recommend the Ender 3 V2. But, I will keep my eye on this printer and if its as good as you've shown, I may change that recommendation :)
@TripodsGarage 2 роки тому
Nice review! Think this will be a great printer for first time users.
@ModBotArmy 2 роки тому
Thanks Brotha! Yeah many of the printers I have tested feel so similar to each other. This one at least feels like it’s got some additional good stuff going on. I will likely run some big projects through it 😬
@TripodsGarage 2 роки тому
@@ModBotArmy - I haven’t tested nearly as many printers as you. I am at around a dozen printers. When I first saw this printer and read the features, I began thinking this was just a CR6-SE clone. However, the electronics are different, including the strain gauge, and the nozzle. To me, this looks to be the better alternative to the CR6SE, which has the most notably feature, the strain gauge.
@ModBotArmy 2 роки тому
I actually had no idea it was even similar to the 6SE until I published the video. Then quite a few comments said it looked very similar. I do have a 6SE on the way but it is not a review unit or intended to be used for reviewing. I am just excited to see how it does having used the Vyper and loving it. Most people that I have talked to that got the 6SE seem to be pretty happy with it.
@ameliabuns4058 2 роки тому
*my dad being a huge fan of my channel* aww that's cute. also with a bowden TPU i can easily hit 60mm/s on my bowden. 80mm/s is likely to work TBH. BMG Extruders are amazing.
@lsellclumanetsolarenergyll5071 2 роки тому
PETG yes always dry it for 2h before you print with it no matter what. Often moisture is strapped inside the roll rather than outside. Me been in Florida I always store them in a dry container and dry them before using it.
@ModBotArmy 2 роки тому
Haha Florida I could definitely see but here it is so dry it is normally not an issue. I have had petg open for months before. I did move closer to the ocean a couple of years ago which may be playing a factor. Will definitely have to think about that more for future prints.
@lsellclumanetsolarenergyll5071 2 роки тому
@@ModBotArmy Keep up the good work. I really enjoy your channel. Maybe we meet each other in the future too who knows.
@safso88 11 місяців тому
apart from being really informative about the reviewed printer, I liked your video just for how proud you make your dad :)
@JConnollystudio 2 роки тому
Thank you, this might be the best review so far. I wanted to know about the hotend. Does it have one or two part cooling fan? I suspect switching the tube to Capricorn will help with the webbing. Thank again
@zombiej79 2 роки тому
Has a 4010 for the heatsink and dual 4010 blower fans. Have had mine about a month now.
@zombiej79 2 роки тому
Could use ducts to focus the air a bit better
@redavatar 2 роки тому
To me this looks very very close to my CR-6 SE in terms of features except the CR-6 has a filament run-out sensor and had a glass bed. I love my CR-6 SE though - print quality is ridiculous even at 100mm/sec. If this printer was a little cheaper to buy, it would have been a very appealing product.
@markparente6532 2 роки тому
purchased this the other day and couldn't wait. It was supposed to be easy peasy. my only problem is that when I go to print the nozzle never touches the build surface. It just starts spitting out filament. tried to figure out z offset but couldn't get it going. any help would be appreciated. thanks
@motodiaries8204 Рік тому
I wonder if your "wet filament" was really a temperature issue. It's also probably related to the geometry, with the shorter line segments laying down differently than the longer lines below. Notice that both prints are clean down low and then suddenly get rough higher in the print. As the nozzle gets farther from the bed the ambient temperature drops off and the filament can lay down too cold. I suspect that you would find the layer adhesion to be poor in that part of the print as well.
@sgtkabukiman9411 Рік тому
I'd check the firmware of the other printers for an option to disable the touch screen beep. It's probably there and just not enabled to change in the interface. Disable it and compile a new firmware. My Ender 3 Pro had a video assembling guide on the USB drive that shipped with the printer. Compared to the printed guide, it was an easier and more efficient way to assemble it.
@MrTegidTathal 2 роки тому
You said the hot end wasn't all-metal, but the neck of the heatbreak looked too thin for PTFE tubing. Wouldn't that mean it's all metal effective? My V6 clones all have a short length of PTFE to the all metal heatbreak.
@williamhargraves8813 2 роки тому
Now just have to wait till there available in Australia 😍🤩 Edit : now I know what's wrong with my grey esun petg, first 2 weeks printed great then swapped to esun pla then went back to the petg and got the same bubbling and popping noises 👍 guess I'm buying a dryer too
@natcole2629 2 роки тому
I live on a coastal site and keeping PETG dry is a nightmare. I've built a filament dryer which is also a spool holder so it can dry and feed the printer with the dried filament on the fly. Uses a cheap food dehydrator with a few mods. Seems to work well.
@luislopez995 2 роки тому
Hi from Puerto Rico Boss, I’m new to the desktop 3D printers…. Now I’m thinking of buying one 3D printer….. this one is looking like the right one…. Any tip and or advise that you have I’ll appreciate it thanks..!!!!!!!
@peterzhao3387 2 роки тому
What is the hot end design, what is the thermistor model?
@potteryjoe 2 роки тому
I've had an i3 Mega & a Kossel for several years, & they're both fantastic machines
@redhonu 2 роки тому
Noob here, What does a printer need to be compatible with klipper, from what ive heard the advanced features can really imporve prints, and it would be cool if i can do this in the future when my budget allows.
@rodnamberkarns3424 2 роки тому
It would be interesting to see what happens if you were to print TPU at 80mm/s. Won't know until you try!
@marcofranzini8610 2 роки тому
I printed XYZ test cube in TPE (softer then TPU) at 150 mm/s and acceleration of 1200 mm/s
@devan_builds_a_truck7568 2 роки тому
I have a question for you, I’m having trouble getting my vyper to perform Cura pause at height scripts for filament changes. It’ll do the pause and move the printer head but the screen won’t continue to allow me to continue the print. What do I need to do?
@babylonhobbiesandfpv4862 11 місяців тому
Im chasing upgrades for my anycubic kossel linear plus, anycubic no longer sells parts and my heated bed build surface is worn and get no adhesion anymore, where would i get a new build surface and some 3rd party parts or upgrades that will fit the linear plus..
@pizzablender 2 роки тому
I find that results are so much better when using Klipper as firmware. No ringing, much smoother surfaces. This hardware can likely work fine (if the board can be supported) - including the leveling. But not the touch screen.
@goofyinestherville 2 роки тому
How do you install that?
@tewkesburypastandpresent9555 Місяць тому
Hi I have been trying to set up my Vyper to print PEGT using a Cura slicer. It prints great until I introduce supports and I just can not seem to get it right. The supports just stick so well I can't get them off and the underside like the roof always has a terrible surface as if the filament is not sticking together on the first layer after a support. I would be so grateful for any advice pleas.
@cnc-maker 2 роки тому
I think this is like the 3rd or 4th review that I’ve seen on the Viper, and everyone has pretty much been saying the same thing. It works out of the box. Which to me means that it’s probably good as someone’s first printer. It does look like yours might be a little more out of calibration than the others, so I’d probably run a full calibration on it, especially the extruder and Linear Advance. On my Snapmaker, I’ve been printing TPU at 60mm/s, but it is a direct drive. I’ve also done the same on my Ender 5 Plus, which I upgraded to direct drive, all metal hot end, and linear rails. I might give 80mm/s a try once I install the Mosquito Magnum. I’m just starting to experiment with variable accelerations, like higher for infill and traveling, and normal for perimeters. I wouldn’t be surprised if a lot of new makers found this under the Christmas tree this year.
@nostrodamus1980 2 роки тому
or they just got the printer for free and dont want to upset the supplier to not get more printers for free. It looks promising but ill wait until actual buyers start using the machines
@cnc-maker 2 роки тому
@@nostrodamus1980 you should pay attention to the disclaimers in every video. If the content creator misrepresents themselves in their disclaimer, UKposts will pull their account and all revenue generated, as well as report the infraction to the FTC.
@nostrodamus1980 2 роки тому
@@cnc-maker you mean like this vid that has no mention of whether the printer was sent for free or that they paid for it
@cnc-maker 2 роки тому
@@nostrodamus1980 1:06
@nostrodamus1980 2 роки тому
@@cnc-maker anycubic reached out to me giving me a list of specs for a new they will be releasing is not saying either
@hugo-fy7by 2 роки тому
Do you recommend this one over a creality ender 3 V2? Or the 5 pro variant?
@jules7784 2 роки тому
How would you replace the parts colling Fan to get it to be less annoying ?
@logicalparadox8954 2 роки тому
it looks shockingly like the Creality CR-6SE, of course it has technical differences to it but that frame and silhouette is identical to the CR-6 i've got sitting next to me
@78Tr1ton 2 роки тому
It is a clone of the cr 6 se
@andrewdowney760 2 роки тому
Will you be reviewing the ender 3 S1?
@Savage1776_ 2 роки тому
Duel AXIS is an upgrade too!! Check out the NEW FIRMWARE they have as well!!!
@DangerousDaveKincaid Рік тому
Great review.. I just purchased the Anycubic Kobra model. The print quality to me so far looks real good. The one thing though is that It has the edge or lip material all around the part and is hard to get off. I noticed your parts did not seem to have this edge or boarder around the outside of the part. Could you maybe give me some suggestions out to get rid of this boarder? Then again I don't know what this boarder is called. Thanks, Dave...
@dsp4392 Рік тому
It's either a brim, or elephant foot. A brim is extra material that's intentionally added around your part on the first layer to improve bed adhesion. You can enable/disable it in Cura under the "Build Plate Adhesion" section. Elephant foot is when your part is actually wider than it should on the first few layers. This is typically caused by a nozzle that's too close to the bed on the first layer, or excessive bed temperature that keeps the first layers soft, making them expand under the weight of the layers above. This can be fixed by reducing the bed temperature, increasing z-offset, and if nothing else works, by setting "Initial Layer Horizontal Expansion" under "Walls" (in Cura) to a negative value such as -0.2mm.
@Nazgull2k1 2 роки тому
Pls note - Cura now has 100% native support for the Vyper, no need for the fiddling of settings seen at 8:00.
@stryk3rkaos 2 роки тому
What would you recommend for the $500 range? Just starting out. I do need it to be accurate enough to print gears that will actually spin. Thanks for any tips!
@watchaprintinwillis2644 2 роки тому
Sidewinder, this, FLSun SR, an Ender 3 can accurately print gears for way under $500. Biqu BX if you have deep pockets.
@MiggyManMike 2 роки тому
The sound could be the result of the pwn control at certain speeds.
@rickjablonski9669 2 роки тому
Sorry to keep spamming your comments. But think I can help you out with the Cura/M1 Mac issues. Messed around with some more complex designs, and was getting the same issues. Crashing. Freezing. Frustrating. It’d slice just fine. But issues would abound if I tried to preview. Did a little digging and discovered an easy fix that works well so far... 1) Open Cura 2) Select “Ultimaker Cura” from the menu bar 3) Select “Preferences” 4) Check the box for “Force layer view compatibility mode” 5) Restart Cura This worked immediately for me. Tried a bunch of different designs that were previously crashing every time. No issues. I’m still a newb with CAD, Slicing, and printing. But, hoping this Cura fix can help someone out.
@shanerichter6402 2 роки тому
Hi, i'm having an issue where i press auto level and the first position it tries to probe is off the front left corner of the bed so it troes to probe and gets stuck because it isnt making contact. Any idea what this could be? I have a v 6 motherboard running 2.3.5 firmware. Thank you!
@austinwhite3575 2 роки тому
Hoping these printers end up in more canadian retailers - amazon at the very least. Most places that are selling this printer are mainly american sellers.
@brisance 2 роки тому
Did the light on the nozzle come with the printer? If it's stock, that's a very good feature.
@DokuZeinto 2 роки тому
Yeah it comes installed :)
@ericl3272 2 роки тому
What is the fastest you printed with this I run PLA on the mega x at 80mm
@the_wretched 2 роки тому
Can you print nylon or other high-temp material?
@marksdroidx 2 роки тому
I just took a look at print speeds, what is really the realistic speed?
@samster1995 2 роки тому
Negative things seems to be addressed by anycubic. Fans aren't loud at all and hotend assembly connector is removable. Machine it self is incredible well packed, sturdy and easy to assemble. Leveling works great first try.
@Cfontes82 2 роки тому
Would you get a Biqu b1 or the vyper ? is it worth the price difference?
@bigdogkmc 2 роки тому
I noticed on all of your prints side walls there is a lot of unevenness. Is the auto tensioners spring pressure or rigid screws. If they use some kind of spring there is definitely bouncing in the X-Y movements.
@cnc-maker 2 роки тому
To me it looks like the extruder needs calibration, and that it could use a Linear Advance calibration as well. I’ve seen like 3 other reviews, and they seemed to be better calibrated out of the box.
@MrrDrip 2 роки тому
Would you choose this or FLsun Super racer
@seljd 2 роки тому
The Mega-S test print had two owls, the left one had a top hat and the right one was the same as on this test print, looks like they probably used same .stl file and just removed the right one without centering the other
@JP-xd6fm 2 роки тому
The mega I3 I had it came with the 2 owls as well and they came flawless btw, not like this one...
@seljd 2 роки тому
@@JP-xd6fm my i3 (RIP) also had perfect owls, as said in the video, the profile isn't the best and needs some modifications. Anycubic probably just ran out of time (or were too lazy) to finetune the profile for the Vyper and reused the i3 with minimum adjustments
@Rsm583 2 роки тому
This is the 1st printer I have seen using dual Z Stepper in parallel with end stops on both sides. Is it possible to modify an existing 3d printer with dual z stepper in parrel from one endstop to two? I think this is a cool feature.....
@jon9947 2 роки тому
I think probably a better/easier diy gantry leveling method is to use an abl. Marlin has the ability to level the gantry using a bltouch. You still use two independent z stepper motors, because each motor has to be independent regardless of if it uses an end stop or an abl.
@natcole2629 2 роки тому
You'll need a control board with a dual driver output to use dual axis align. I use it on my Tronxy X5S and the Marlin command is G34 for the auto-align feature. I use the bed levelling probe to do the alignment, bed levelling and Z min endstop. That way you can do away with any Z endstop limit switches. It works really well with an inductive probe and a PEI coated magnetic steel build sheet.
@alexantony007 2 роки тому
I was planning to purchase a vyper but in the site they have mentioned 3options under VARIANT TITLE. Can anyone advocating what that is? Thanks in advance
@ChinaAl 2 роки тому
I print where I need to change colors. How easy would it be to change filament in the middle of a print?
@isseiararagi9503 2 роки тому
What settings did you use for petg
@rondlh20 2 роки тому
Nothing about the bed leveling with the nozzle!?
@crisjasper7127 2 роки тому
11:12 Hated my Ender 3 pro for having vertical lines with every print. After seeing this part of the video, I'm thinking if it is really normal to see those artefacts on a print.
@boggisthecat 2 роки тому
It’s due to the harmonics as the print-head moves back and forth. If you slow the print down, they become less pronounced. The only way to get rid of it is to use a different main board and run Klipper with acceleration tuning. ‘Teaching Tech’ has a good video on this.
@crisjasper7127 2 роки тому
@@boggisthecat hey, thanks for replying! I think you're talking about the ghosting/ringing. What I was actually talking about was the constant vertical ridges which appear on the flat surface of the print (as seen in 11:12). It has something to do with belts being over-tensioned and the type of stepper motors that you are running. Quite annoying, really. But after watching this vid, I found that to be a common (not normal) problem. Thought I was the only one who's dealing with such shit. Edit: this is different from ringing. Ringing is something that appears near the corners of the print (or everywhere there is a sudden change of print direction). This one appears, however, everywhere that is flat. Also, this problem is exclusive only on the axis where your belts are over-tensioned or where your stepper motor is crap.
Супер Стас
Переглядів 3,6 млн
Aurora Tech
Переглядів 109 тис.