The Cricut CHANGED MY LIFE - Make your own Paint Masks!
Переглядів 69,656
День томуThe Cricut changed my life! I use it all the time to create my own decals and paint masks, and is the perfect thing for the RC Hobby if you want to create stunning paint schemes on lexan, or hard bodies! Don't struggle with liquid mask or masking tape any more!
I go through all the steps in creating and applying masks in this video.
More info on Cricut: cricut.com/en-ca/
Cheap Vinyl: www.ebay.com/sch/i.html?_from...
Our merch is super cool: teespring.com/stores/scale-bu...
#cricut
#paintmasks
#ilearnedsomethingtoday
#scalebuildersguild
Buy my gear here:
Sony a6500 amzn.to/2u9Rsfs
16mm Sigma amzn.to/2UFv5dD
55-210mm Sony amzn.to/2TH8DUR
Rhode Video Mic: amzn.to/2W56DlX
Zhiyun Crane amzn.to/2TIaxo9
GoPro Hero 6 Black amzn.to/2Y3rGHx
This Dewalt screwdriver is my goto nowadays.
amzn.to/2udpvn4
Summer 2020 Stickers are sold out: scalebuildersguild.com/forum/...!
► Follow us on Instagram! / scalebuildersguild
► Follow us on Facebook! / scalebuildersguild
► Join our forum!
www.scalebuildersguild.com/forum
► Merch available here:
teespring.com/stores/scale-bu...
I shoot all my videos on the Sony a6500 in 4K, with Sigma 16mm, 19mm & 30mm and 55-210mm f1.4 lenses and the Zhiyun Crane V2.
MB01F145F03ZQBV
@HarleyDesignsInc Рік тому
This video is hosted by “weekend Matt”. Top button undone and sleeves rolled up, trying to connect with the audience 😁 Now I’m off to try painting again.
@RCTNT Рік тому
When does the Weekend Matt bobble head come out?
@sir2honda Рік тому
"Weekend Hooker" needs to be on the SBG bumper sticker sheet
@scalebuildersguild Рік тому
Hahaha! I've already got the next set designed, but a good idea for next time! Thanks!
@timpowers9429 Рік тому
Should go on the back of the “no fun haver” 😉
@jcsrcs225 Рік тому
Quick tip when it comes time to apply the vinyl (or the painting mask) to the lexan body, especially on larger designs that are hard to position correctly on the body: Once you have applied masking tape (or transfer tape) and removed the vinyl backing paper, use a piece of parchment paper to cover about 90% of the vinyl design, leaving only a small edge of the vinyl adhesive exposed. The parchment paper will NOT stick to the vinyl adhesive and allow you to freely slide the design into exact position. Once there, use the burnishing tool to adhere the small area of exposed vinyl adhesive, serving as an anchor point. At that point, you can carefully lift up the remaining material, slide the parchment paper out, and then burnish the rest of the decal into final position. This also works great when using multiple colors of vinyl as an exterior decal - the parchment paper lets you align each color layer before adhering to the body. Hope this suggestion helps!
@blitzrc4713 Рік тому
Your long message shows why it's a waste of time
@scalebuildersguild Рік тому
Great tip! I think everyone uses different techniques, but this is definitely a good one. Thanks for watching!
@TheRustyPlace 5 місяців тому
@@blitzrc4713 It's a common technique to apply stickers correctly.
@user-yy1lp2te8b 2 місяці тому
wow thanks for that tip, I'll try it next time!
@perohijo 4 дні тому
We just bought a cricut. Of course my wife wants to make her own things but the main reason we bought it is to make decals and logos for my RC cars. I told her to watch UKposts videos to learn. This is very helpful for me because I need to learn how to make a logo for my current project. Thanks!
@scalebuildersguild 3 дні тому
Glad I could help! Enjoy the Cricut!
@PhiddyPford Рік тому
Works perfectly! I’ve done two drag body’s with my own racing team. I drew the files and my LHS owner cuts vinyl $5 a logo for painting masks (two sides) no more liquid mask on the light table. At 68 I’m still painting
@scalebuildersguild Рік тому
Thanks for watching and I sure like my Cricut!
@hemistormrc Рік тому
Great video and thank you for the shout! 🙌🏼
@mickd8188 Рік тому
Just picked a Cricut and been looking for tutorials so perfect timing Matt. This will be a solid video for folks to reference and gain experience in the RC community.. Absolutely a game changer for painting. Cheers mate 👍
@scalebuildersguild Рік тому
Thanks! Glad you enjoyed it!
@tb0nz4ya Рік тому
I love mine. I love being able to do precise things.
@rccrazy7495 Рік тому
No lot lizards... There's a good sticker for you collection.. again thanks for all the time and effort . RC Crazy.
@nuge74 Рік тому
Agree 100%. These machines are handier than a shirt pocket for the hobbyist.
@walterfiehl1557 Рік тому
Thanks matt,that was a great introduction for those cricuts...
@scalebuildersguild Рік тому
Glad it was helpful!
@LetsGoRCn 2 місяці тому
OUTSTANDING video!!! Purchased a Cricut Maker for my wife in 2020. She never used it 😂 and just told me I can have it! Whoo-hoo!! Can’t wait to create some epic paint masks with it. I truly appreciate your video
@scalebuildersguild 2 місяці тому
Love it!! You wouldn't believe how many messages I've gotten like this. Glad I could help!
@DoubleClutchProductions Рік тому
Always awesome SBG, Cricut for the win
@scalebuildersguild Рік тому
Thanks for watching!
@jcautodesign Рік тому
Top tip: when your cutting mat stops getting sticky, clean off the old adhesive with goo gone (not the wrong one Josh was using) and then mask the edges and spray 'batting adhesive' (found at the craft store, it is similar to the 3M adhesive, but similar to the original stickiness of the cutting mat). Also, keep the plastic sheet that came with it on the adhesive in between uses to prevent cat hair from gunking it all up. I use a Brother Scan n Cut which is very similar, but super easy to use vector files or the main selling feature is you can take an existing printed sticker, Scan it, then the software can find the edges and cut it out.
@luannwood1009 Рік тому
Or you could clean the mats with a baby wipe like the crafters do.
@ChunkiieCustomz Рік тому
I have a 32” vinyl cutter I used to make banners with… now I have to make my own paint decals. Whew failed business into happy hobby!!! Hahah
@1LACOSRC Рік тому
My Wife has a Cricut that I have learned to use for my RC channel logo/stickers & T-shirts. Pretty cool machine for sure💯😎
@wingnutgaming_uk99 Рік тому
I love that you play Beamng
@minitruckstuff4374 Рік тому
Great video man, good info and instructions.
@CarmineRC Рік тому
OK Matt, you SOLD me!! I'm selling my Sovol 3D Printer, which I've never taken out of the box, and buying a Cricut!
@scalebuildersguild Рік тому
Enjoy!
@falconaz Рік тому
Brilliant! Not working on a crawler but a drift car. Was thinking decals but you've really got me considering masks. Well done!
@TheDeLeonGarageCollection Рік тому
I’ve been using my cameo silhouette for six years now. I originally bought it to cut vinyl transfers for T-shirts as well as window decals, but have since transitioned it to strictly a hobby vinyl cutter. I now use it to make masks for my RC cars, I have also used it used it to make decals for models, slot cars and RC cars, boats or anything that needs A custom cut decal. I use oracle 650 exclusively which is an indoor outdoor permanent vinyl. It’s probably my most used hobby tool.
@scalebuildersguild Рік тому
Cool! Thanks for watching and the info on the Cameo!
@Brian_Mowry__BMOW71 Рік тому
Excellent how-to vid! I've been wanting to get a vinyl cutter for some time now, but wasn't really sure how hard it would be to make decals and masks. Now after watching I see how easy it really is! Thanks for sharing this and I look forward to seeing more in the future!
@RCBadasserie Рік тому
Thanx Matty!
@gatorrcgames Рік тому
My wife has a 3 different circuit's I have had her make me a few decals but will try it for a mask for my next rc paint job.
@scalebuildersguild Рік тому
Enjoy!
@rcdriver Рік тому
Ugggghhh! Now I gotta go buy this. Thanks “Friend!”
@scalebuildersguild Рік тому
Sorry! 😂
@robksawyer Рік тому
Great video! Thanks for sharing the process!
@scalebuildersguild Рік тому
Thanks for watching!
@kc_green3573 Рік тому
Great tutorial. Now I have to buy one for my base camp project
@scalebuildersguild Рік тому
Enjoy!
@laserbeam1620 Рік тому
Great video! Not nearly as daunting as I figured. I will be opening wife's brand new Cricut Maker and putting it to use lol
@scalebuildersguild Рік тому
Good luck! Thanks for watching!
@Smile-N-Bear Рік тому
Why is it? Some of your best most informative videos. Always cost me money! I do enjoy how you put it in laymans terms. Definitely brings up the confidence level. Always appreciate the info. Right On Brother 👊
@scalebuildersguild Рік тому
Should I say sorry? 😂
@Smile-N-Bear Рік тому
@@scalebuildersguild 🤣
@LRCR Рік тому
Kevin Gibb's is so tight his toes squeak when he giggles 😂🤣😂
@Smile-N-Bear Рік тому
@@LRCR 😂🤣😂
@dutch1800 Рік тому
I have an Air 2 and have many window stickers for 1:1 cars and RC's as well. Have also use printable vinyl with the print & cut feature for making stickers.
@adamb7426 Рік тому
Excellent!! Thank you!!! 👍👍
@metalrc Рік тому
Awesome! just purchased a Cricut 2 days ago this video perfect timing to get me up to speed . I have some bodies already waiting to try it out on .
@Tight_Lines_Uce Рік тому
Thank You for sharing your thoughts and time making this very informative video. 👏🏼
@scalebuildersguild Рік тому
Thanks for watching!
@ridgerc5976 Рік тому
When it comes to Hemistorm his abilities are phenomenal.
@scalebuildersguild Рік тому
For sure!
@ridgerc5976 Рік тому
I only wish I could get to your guy's level.
@geoota Рік тому
Oracal (Orafol) is one of the best sign vinyls on the market. The term "Intermediate" is the quality of the actual vinyl. There are generally 2 types of manufacturing processes, cast and calendered (cast being the higher quality). The vinyl you have (651) is calendered. 651 is pretty much the standard for signs and vehicle decals, etc. For your purposes of masking and decals, 651 is an ideal cost to usage value. Orafol also makes a masking material, but it would be hard to justify the additional cost. There's also a lower tack "removable" vinyl (631) which has a slightly higher price tag. But, if you're not having issues with the 651, then I would just stick with that. I would recommend one thing when it comes to making decals/masks and that would be the usage of application or transfer tape. The adhesive isn't as aggressive as masking tape which helps with the release of the decal. The R-Tape brand is a go to for consistency. They make transparent and semi-opaque versions. One other recommendation is to look in to the Silhouette brand craft cutters. They are distributed by Graphtec which is a manufacturer of commercial plotter/cutters.
@scalebuildersguild Рік тому
Thank you for the insights!
@wadebrown1126 Рік тому
Love this video!!! I have been using a vinyl plotter to help me paint for at least 20 years now. I don't use a cricut I actually use a bigger (28 inch ) format plotter/ cutter by gcc (You can get a decent sized cutter now for a couple hundred bucks that actually works if you ever plan on making larger decals) and every time I use the cutter for more of the design and do less and less hand cutting. I design all my graphics on illustrator instead of downloading them just because I'm fairly proficient at it, but I was stoked to see you show people how to pull designs off the internet instead of having to create it themselves ( which is why I think most people shy away from this bit of tech). Loved this video, keep up the great content.
@scalebuildersguild Рік тому
Thanks for watching! Yeah, as you know I use Illustrator, but it's not the easiest program to learn right away, so I wanted to be able to give some easy options.
@jawknee21 8 місяців тому
just bought a cricut just because of this video. thanks a lot!
@scalebuildersguild 8 місяців тому
Glad I could help! You'll love it!
@nopes1776 23 дні тому
Beginner tip, Walmart has rolls of clear drawer liner and that works much better than the actual transfer paper made specifically for that, also much cheaper.
@scalebuildersguild 15 днів тому
Thanks for the tip!
@alittleofeverything153 2 місяці тому
Great video. Thanks. I've used an older Cricut but im ready for a new one.
@scalebuildersguild 2 місяці тому
Hope it helped!
@RCPropaganda Рік тому
Always been interested in one of these.
@derekhell666 Рік тому
thank you so much for doing this video. been wanting to pick one of these ups.
@scalebuildersguild Рік тому
Glad it was helpful!
@richardwright7648 Рік тому
Awesome bit of kit, cheers for the tutorial and introducing me to this 😁
@scalebuildersguild Рік тому
Thanks for watching!
@danielcurtis3822 Рік тому
Thank you for making this video. I really needed this content to help make my decision.
@scalebuildersguild Рік тому
Glad you enjoyed it!
@miniboom007 Рік тому
Thats awesome! Thanks for the video.
@scalebuildersguild Рік тому
Glad you liked it!
@patricesavard366 10 місяців тому
That's actually awesome, my girlfriend got a cricut for her scrapbooking, might be able to squeeze a vinyl or 2 when she's not looking around 😅
@scalebuildersguild 10 місяців тому
That's awesome!
@lafrede1 Рік тому
Been using mine for some time and it does take your decal and paint skills to a new level.
@scalebuildersguild Рік тому
Thanks for watching!
@baldbeaversrock Рік тому
Loved the video. I have an old school 1st Gen cricut uses the old style cartridges to change fonts 😝 but that being said one thing I use to make paint masks is shelf paper we used to call it Mac tac . It comes in large rolls and since it’s a mask colours don’t matter but white or frosted is easy to find and easy to cut.
@scalebuildersguild Рік тому
Great tip!
@anthonyhart6723 11 місяців тому
Man i need one of these for sure
@ThatGreenGD1 Рік тому
Love this video. So helpful. I’ve wanted a vinyl cutter for just this but never knew where to start so this is great content. Thanks for posting SBG. Quality video as always and the method race body look sick.
@scalebuildersguild Рік тому
Glad I could help!
@peteryedica6510 Рік тому
My girlfriend and I just started using her Silhouette vinyl cutter to make decals and masks, and it is Awesome! I can now “print” all the masks that I failed horribly to make using tape or liquid mask b4.
@scalebuildersguild Рік тому
Glad to hear it! Thanks for watching!
@jconis7401 Рік тому
Awesome Matt! We just got a cricut a month ago, this vid helped a bunch!
@robbiebobster9672 Рік тому
Love my circut.
@jeffwarren392 Рік тому
All the videos I watched made it look so easy, so I bought one. It's just been sitting. Your video really explained a lot. I'll have to take another stab at it. Thanks!
@scalebuildersguild Рік тому
Thanks and good luck!
@HoundStuff Рік тому
Nice demo, thanks!
@scalebuildersguild Рік тому
Glad you liked it!
@hemitj Рік тому
Thank you for this video!
@scalebuildersguild Рік тому
You are so welcome! Thanks for watching!
@offroadrcretailandraceway8216 Рік тому
I'm so excited to see this video. I was planning on getting a Cricut this fall and now I will be referencing this video... too easy!
@scalebuildersguild Рік тому
Glad it was helpful!
@BreydonsRC Рік тому
Thanks for this vid man. Been thinking about grabbing one of these for this exact purpose.
@scalebuildersguild Рік тому
Glad I could help!
@idahoredbeard Рік тому
Thanks Matt! This is for sure a game changer!! I don’t know if you have yet or not, but a how to on a multi color paint job with logos would be legit and VERY helpful to a newbie such as myself
@scalebuildersguild Рік тому
That requires a bit more setup, but it can be done! You have to make a few different cut files to start, and line up a lot of things by hand. At least, that’s how I did it. There’s probably a smarter way!
@michaelc3416 Рік тому
Awesome video on a very cool tool. Love the result you achieved on the Lexan body. Reminds me of the Marlboro race livery with the clean simplicity yet memorable image. Nicely planned and executed.
@scalebuildersguild Рік тому
Thanks for watching!
@dustinalexander982 Рік тому
Thanks for posting this was definitely helpful for the rc game and been thinking about getting one for a while thanks
@scalebuildersguild Рік тому
Glad I could help!
@steelstrings4998 6 місяців тому
"Flip vertical" is good if you are manipulating shapes and stuff like that to make a design. There's also an option on the "make it" screen to mirror the image, which would also work for your purpose of flipping the text.
@aseussjr.4388 Рік тому
Great Video. Love the tips. I do have one and use it for stickers and shirts. Great expensive machine to use.
@travezripley Рік тому
Sold! I’m going to look into purchasing a cricut for our lab! Thanks!
@scalebuildersguild Рік тому
Glad I could help! Enjoy!
@robertmorey4104 Рік тому
Thanks SBG, great video. Been thinking about getting a machine like this for masks.
@scalebuildersguild Рік тому
It's great for masking! Thanks for watching!
@413RC Рік тому
I did a video on the $100 cricut air and use it for the exact same thing. It’s really great to make your own shirts and scale vinyl decals for RC cars. Awesome video!
@julioperez809 Рік тому
Great idea. I’m going to need to borrow my wife’s cricut.
@scalebuildersguild Рік тому
Go for it!
@mizlude92 Рік тому
You did a better job explaining the software for these machines than some of the other videos I’ve watched. Thanks man. Now I’ll be using my gf’s bday gift for RC stuff lol.
@scalebuildersguild Рік тому
Glad I could help! Enjoy!
@mikeduckworth6691 Рік тому
Thank you
@polkatit Рік тому
I’ve done several bodies using designs I grabbed of google for myself and my friends. It makes the bodes turn out amazing.
@scalebuildersguild Рік тому
Sure does! Thanks for watching!
@chrisgibbs9218 Рік тому
I recently bought a Cricut maker just for this purpose. I’ve been looking for a good video to show me how to make the masks. Excellent video and will share with others that are looking to do this
@scalebuildersguild Рік тому
Thanks, glad it was helpful!
@justinv584 Рік тому
Smells good in here 🙃
@smackroscoe Рік тому
Informative, exceptionally well explained & professionally presented. First video of yours viewed & immediately Subscribed! Well done Sir!
@scalebuildersguild Рік тому
Welcome to the channel and I'm glad you liked the video!
@LRCR Рік тому
Heck Yeah Matt I've been using my Cricut Cutter for the Paint Masks and the Exterior Graphics on my RC's for a few months now... Weeding is the key on small text like my Corporal Crawler Theme Pro-Line Gladiator on the Gen 7 Sport ✌🤠👍 Having Fun Laughing Playing and RCing 👍😎👍 AOAH 🙏 Stay Safe and Play Healthy My Friend ❣️
@scalebuildersguild Рік тому
Thanks for watching and stay safe to you too!
@LRCR Рік тому
@@scalebuildersguild Q....what kind of masking tape did you use? I've been using transfer tape for vinyl... your's might be more budget friendly
@scalebuildersguild Рік тому
@@LRCR just a 3M automotive tape, but, it’s a pretty strong bond, so it may not be to your preference.
@MikelangeloPhoto Рік тому
Love my Cricut.. crazy useful. I will say larger logos/graphics cut more smoothly and are easier.. but I've made some reasonable small text graphics with it, too. FUN stuff!!
@scalebuildersguild Рік тому
Glad you like it!
@SuperChunk1775 Рік тому
Thanks! this is a great video!
@scalebuildersguild Рік тому
Glad you enjoyed it!
@zincyellowmach1523 Рік тому
Great video, I have been considering one. I have an mpcnc and have the vinyl cutter attachment but have not had a chance to swap it out. This would be simpler than switching all the time. Would love to see you build an mpcnc, talk about game changer!!
@bamabiker750 Рік тому
I have a Cricut (the cheap one) and use it to make decals for my RC's (mostly sponsor decals that are no longer available). It's super easy to use and it works great. I have yet to use it to make masks but I will being doing that soon. Another great how-to video!! My thumbs are pointing up.
@scalebuildersguild Рік тому
Thank you! Definitely try it for masks, it's a game changer!
@Fotomotion_garage Рік тому
Been wanting one. Maybe time to pull the trigger.
@scalebuildersguild Рік тому
It's a great tool! Thanks for watching and good luck!
@okiedoak201 Рік тому
Love my cricut...I have the same machine and make decals for rc race boats...but never gave this a thought....excellent demo...heck...I even learned a new trick and I have been using mine for a couple years....👍
@scalebuildersguild Рік тому
Glad I could help! Thanks for watching!
@All_RC_Fun Рік тому
Very helpful. Thank you.
@scalebuildersguild Рік тому
Thanks for watching!
@kencarter7810 Рік тому
Nice video!! I use a Cricut also for custom decals but never tried to make masks. New ideas now thank you!!
@scalebuildersguild Рік тому
Glad it was helpful!
@RexRacer19 Рік тому
I bought a Cricut Joy last year just for this type of stuff. It's a smaller format and is for cutting only, but that's all I need it for. Great little machine.
@scalebuildersguild Рік тому
Cool! Glad you like it and thanks for watching!
@CoachDRC Рік тому
Appreciate the tips… i typically still click the background on simple even with transparent from a Google image as sometimes it doesn’t remove it completely.
@jdsrcs8061 Рік тому
Very cool!!! A guy at my local hobby shop has one. He makes cut outs for his paint jobs. I had him cut me some Deadpool cut outs for a paint job I did. I want one of these
@bradcowart5044 Рік тому
I just bought that exact one last night. Looking forward to learning how to use it. 😁
@scalebuildersguild Рік тому
Enjoy! Thanks for watching!
@shafiqjan1474 Рік тому
I was looking at these when they were on sale for the end of year holidays, but instead I replaced my ultrasonic cleaner. You tutorial has convinced me to pull the trigger on one of these. Chuffed...
@scalebuildersguild Рік тому
Enjoy!
@shafiqjan1474 Рік тому
@@scalebuildersguild I will. There is a ton of work ahead. Murdertown race club stickers, cheeky logos and more are on the way. I really need super custom license plates now for some reason...
@just.jose.youtube Рік тому
This looks sweet! Great possibilities. Would love to have the "time" to buy one. :)
@varmintsniper2551 Рік тому
I’ve just started making logo banners for my 1/24 scale crawler course with the smaller Cricut Joy. I’m digging the possibilities on my next paint job.
@scalebuildersguild Рік тому
Good luck!
@pwrofgrayskull Рік тому
Great…now I have to go and try to swipe my wife’s Cricut when she’s not looking. 👍✌️ Thanks a lot Matt, I’ll probably end up dead.
@scalebuildersguild Рік тому
RIP my friend 😂
@daveybuckley117 Рік тому
My wife loves her Cricut ! I have yet to use it for my rcs but I’m willing to give it a go for ahee
@scalebuildersguild Рік тому
You should!
@Musiquence Рік тому
I have a Silhouette Camero 3 vinyl cutter that I only used a few times to make stickers. Never tried to make paint masks with it. I painted a few bodies, but only in 1 or 2 colors, nothing fancy. Guess what I'm gonna (try) do this weekend! Great video, thanks!
@scalebuildersguild Рік тому
Good luck!
@bubba6richards729 Рік тому
Great explanation. Ordered one 🤣😎👍🏼
@scalebuildersguild Рік тому
Hope you enjoy it!
@bubba6richards729 Рік тому
Absolutely loving it. Amazing time saver for making stencils. Unreal!! 😎
@ST-zx9ue Рік тому
I have been using one of these for some time now. The options for masking a body are limited only by you imagination. Very nice detailed explanation of how the process works. The only thing I do different is use transfer tape instead of masking tape.👍
@scalebuildersguild Рік тому
Thanks for watching! I haven't tried transfer tape, so thanks for the tip!
@openoutlaw Рік тому
Excellent video Matt. I had a vinyl Machine in 2004 when I was racing 1:1 sprint cars. I got tired of paying 600.00+ every time I destroyed a wing. When it came to using multiple colors I used to stack the vinyl. This is a cool machine. Loved learning to use masking tape as a transfer. Great alternative to buying over priced transfer tape Thank you.
@Musiquence Рік тому
Yeah, I also used that transfer tape. Works great, but is indeed quite expensive. Gonna try the masking tape too!
@scalebuildersguild Рік тому
Cool! Yeah, printing large scale vinyl can get pretty pricey!
@ughdadjuststop3268 Рік тому
Love my cricut
@scalebuildersguild Рік тому
Me too! Thanks for watching!
@DrGorillafist Рік тому
I got a Circuit for my wife for Christmas...I call it "Marge's Bowling Ball"😉. One thing I've discovered is to check the cutting blade for errant pieces of vinyl as it does affect cutting performance before the blade is actually dull...
@scalebuildersguild Рік тому
Great tip! Thanks for watching!
@pickled_finn_rc Рік тому
I need to pick up a new vinyl cutter, I’ve got an OG Cameo Silhouette and it’s a bit outdated hah. Awesome tips/tricks! As always, thanks for sharing!
@scalebuildersguild Рік тому
Glad you liked the video, it's a really great tool!
@wesmadebuilds681 Рік тому
You have the biggest monitor I have ever seen, for sure not made for ants! I mean it’s as long as you are tall. 🤣
@scalebuildersguild Рік тому
I know! It's for my day job. Thanks for watching!
@CarDreamsinStyrene Рік тому
I'm thinking back and forward about a Circuit for a long time...and every time when I forgot about it.....some one reminds me again ..grrr....lol..... thank you brother now I have to think about again.... last time I was so far to actually buy the smaller one ( Circuit joy ) but I was not sure if it would cut 0,25 mm Styrene ... so I left it alone.... well thank you anyway for the video, keep it up 😉😁👍
@aarongaponoff9489 Рік тому
I bought a cricut for producing stencils where custom decals wouldn't do the trick. super happy with the results. It can even cut styrene sheeting, so its been a great aid in kitbashing.
@scalebuildersguild Рік тому
Glad you like it!
⚡СВІТАН: ЩОЙНО! Зеленський повернув генерала Залужного. НАТО закриє небо. Путін здивував звільненням
24 Канал
Переглядів 974 тис.
The Airbrush Garage
Переглядів 96 тис.
Мотомалышка Алина
Переглядів 19 тис.
Supercar Blondie
Переглядів 9 млн
Леонід Бобошко
Переглядів 104 тис.