The Ultimate Professional Coating Guide | 16 Pro Coatings Application

2 роки тому

We have created a video where we demonstrate the installation of 16 professional ceramic coatings on a Honda Accord. In the video, we will provide you with information about the source of these coatings, the number of installers in their network, and explain how you can become an installer yourself. Our video series will explore, observe and test these coatings, so please make sure to subscribe to stay updated.
Contact Chicago Auto Pros for Window Tint - www.chicagoautopros.com/conta...
Find one in your area - www.carsupplieswarehouse.com/...
Need a new website? Want to save some money? - www.detailersroadmap.com/deta...
Chapters -
0:11 Introduction
1:38 The Test
6:49 What is a ceramic coating?
8:19 The disclaimer
11:53 How we are doing the testing?
14:48 Modesta BC05
17:23 System X MAX
19:35 IGL Kenzo
21:52 Optimum Polymer Technologies - Opti-coat Pro
24:23 XPEL Fusion Plus
25:54 Fenylab -Ceramic version 2
28:40 DuraSlic Extreme
31:21 Gyeon Infinite
33:58 SB3 Alpha
35:32 Gtechniq Crystal serum ultra
38:16 Ceramic Pro - 9H
41:52 Fireball - Silla
43:25 Gloss it Pro Graphene
45:47Surface Protective Solutions SPS Graphene
47:27 Angelwax Enigma
49:40 Veros Premium Car Care Prime 9 year
51:26 Final thoughts and future videos
Coating contacts -
Modesta: John Purdue - John@thedrivennetwork.com (703)-408-2924
System X: Andrew Feeney - afeeney@element119.com
IGL: Joel LaPalme - jlapalme@iglcoatingsusa.com
Optimum Polymer Technologies: David Ghodoussi - david@opticoat.com (901) 363-4955
XPEL: Aaron - adunham@xpel.com
Fenylab: Sarah Tidwell - s.tidwell@feynlab.com
DuraSlic: Lane Smith - lsmith@floridacirtech.com
Gyeon: Nate - nathan@gyeonquartzusa.com (720)285-7944
SB3: Barry Theal - info@sb3coating.com
Gtechniq: gtechniq.com/accreditation-ap...
Ceramic Pro: Johanna Palomino - johanna@ceramicpro.com
Fireball: Luke Sill - fireballcoatingsusa@gmail.com
Gloss it: Rich Light - rich@glossit.com
Surface Protective Solutions: Brett Welzien - b.welzien@surfaceprotectivesolutions.com
Angelwax: Tom Davis - tomdavis196@gmail.com
Veros Premium Car Care: Chris Jankowski - info@veroscarcare.com
**FIND US ON SOCIAL MEDIA**
Chicago Auto Pros - Facebook - Lombard - bit.ly/2VEtkOn
Chicago Auto Pros - Facebook - Glenview - bit.ly/2G75KmO
Chicago Auto Pros - Instagram - bit.ly/2Ig7bTr
Chicago Auto Pros - LinkedIn - bit.ly/3fmiNSK
Chicago Auto Pros - TikTok - bit.ly/2QjitvD
Have a UKposts Channel? It would help if you had TubeBuddy
www.tubebuddy.com/pricing?a=c...
For more content
Need Paint Protection Film? - opticle.com/
For product reviews and HOW TO videos please check out @Car Supplies Warehouse
**PRODUCTS & TOOLS WE LOVE**
Work SMARTER not harder - bit.ly/3fmqKHw
The PRESSURE WASHER we use - bit.ly/3eOljCw
These BRUSHES are awesome! - bit.ly/3d6FTgM
Favorite CLAY bar - bit.ly/2PcBGOO
CERAMIC COATINGS - bit.ly/49GyxeU
Rupes POLISHERS - bit.ly/2ZumTkr
ACCURATE paint gauge - bit.ly/3fnltzP
Favorite DRYING TOWEL - bit.ly/2SQCBpX
WINDOW TINT tools - bit.ly/2RS1HEv
Garage flooring - bit.ly/3cEoiN9
NEW AGE Cabinets - bit.ly/3olZnl5
NEWEST products at Car Supplies Warehouse - bit.ly/3y70ud7
Disclosure: Some of the links in this description are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
__MORE TO LOVE__
Miranda Detailing Channel - bit.ly/33Dfi55
AM Details Channel - bit.ly/2R6M7ow
Wilson Auto Detailing - bit.ly/2RcrTJK
Legit Street Cars - bit.ly/3w5aCRK
Pan The Organizer - bit.ly/3uPUJOD
Apex Detailing - bit.ly/2RkCAdh
Get a FREE quote on DETAILING, WINDOW TINT, PAINT PROTECTION FILM, VINYL WRAP or CERAMIC COATING: bit.ly/2Ox1Prg
-----------------------------------------------------------------------------------------------------------
CONTACT CHICAGO AUTO PROS!
-----------------------------------------------------------------------------------------------------------
WEBSITE: www.chicagoautopros.com
Contact Jason: Jason@chicagoautopros.com
2 LOCATIONS
GLENVIEW:
2075 Johns Court
Glenview, IL 60025
(224)-432-5462
Glenview@chicagoautopros.com
LOMBARD:
207a Eisenhower Lane S.
Lombard, IL 60148
(630)-474-9263
Lombard@chicagoautopros.com
Hours: Mon - Sat
8 AM - 5 PM
#ceramiccoatings

КОМЕНТАРІ: 248

@ChicagoAutoPros 2 роки тому

Have you had the chance to work with any of these coatings? let us know your experience down below! Also, make sure you're subscribed to stay up to date on our latest update videos in this series.

@fadedlogic1 2 роки тому

I had the SB3 5 year applied to my car last year. Looks as fresh as the day it was applied and easy to maintain. No regrets. Even made the detailers portfolio so I knew it came out good!

@NorthstarcarcareLLC 2 роки тому

Igl and gyeon…I know they ain’t the best buts it’s what I got. My goal is to work up to a cquarts finest reserve level…it’ll take time but I’m growing.

@joelneil121 2 роки тому

I'd love to see your thoughts and review on a coating I've been using in AUS called Revivify, really loving using it, would love to know what you think :) I know you can get in the US as well.

@Sciguy95 Рік тому

I noticed in the description you accidentally spelled Feynlab as Fenylab in both the timestamp and the contact info.

@mr.charizard9232 Рік тому

I’ve worked with opti coat pro and the pro plus product at a shop I was working for a few years ago! Wasn’t a big fan of pro. A lot of their big rep guys left the company as well. Imo g technique has the best coatings and products. I love applying CSL and then top it with exo.

@HoosierDaddyDetailing 2 роки тому

This series is going to be awesome... thanks for taking the time to put all together!

@Bull1the1Great 2 роки тому

I think this has to be one of the most detailed and info packed videos on UKposts...

@abelvela2940 2 роки тому

I appreciate all the hard work u put into this very informative video. Excellent job. Can't wait to see more of this series. 🙌

@David-Godin 2 роки тому

This is the best video and best method of real world testing I have ever seen. The details were perfect and now will be the standard that I judge all videos of this type in the future. I am thoroughly impressed

@duraslic 2 роки тому

Let's go! Thanks for featuring us in this video! Turned out great! Can't wait to see the results!

@chir0pter Рік тому

You all stood out the most tbh. Just seems more product-first than slick advertising and unboxing presentation. I'm interested in the oleophobicity- how do you think that might come into play? Possibly by reducing water spots?

@richlight9901 2 роки тому

Great video Jason 💪 looking forward to the results over the next year

@legion1te 2 роки тому

I would love to see your review on that 2 month update video. Telling us your thoughts on the quality of each of them, as well as your opinion on the prices. And then finally another updated review (can be shorter if not much of your opinion has changed) maybe 6 months or longer down the line. Awesome video! Really appreciate you guys doing all of these testing for the community!

@Shoobedooby Рік тому

This was extremely in depth and genuine. Very enjoyable and insightful, thanks for all your efforts.

@ricks4447 2 роки тому

Thanks to CAP for putting this test on and the work that went in to organizing. I wish Carpro and Kamikaze would have participated but this is still a good group.

@stevefulton5884 2 роки тому

Awesome video. I am a System X installer in Ohio. I really love the coatings and look forward to seeing how they stack up against other pro coatings.

@SamMBPBSB 2 роки тому

I had no idea there were soooo many options of professional coatings out there! Also, thank you for this as the amount of labor was for sure tremendous. I will definitely like to see if indeed it increases the thickness of the paint/clearcoat/coating.

@andrewmurdoch2335 Рік тому

Very professionally done Jason. Enjoyed it👍🏻

@geoffreychadwick9229 2 роки тому

Hot dang now we are talking! I can't help but wonder what products might ultimately work better or worse with certain manufacturers paint schemes, but that would be a rabbit hole where the bottom couldn't be found. This took a lot of work and you guys did an amazing job.

@FireballUSA 2 роки тому

Just to keep things transparent .. Silla is Rated 5 Years .. as we did try to fix the error before the video got posted.. but looks like we were unsuccessful... But no worries 👍 appreciate Jason and the crew testing everything out .. enjoy 😉 can't wait for the results

@LilRick96 2 роки тому

My Butterfly Graphene is coming in today, can't wait to put it on my car 🔥

@ChicagoAutoPros 2 роки тому

Thank you for the clarification. That is my fault, originally we were going to install the butterfly coating and switched to Silla. I already had the script written and changed everything but the durability length. My bad.

@lukoitautodetailingllc3124 2 роки тому

@@ChicagoAutoPros the durability length, cure time, and number of days before washing were all specific to butterfly FYI.

@realsofi Рік тому

im confused that they give firball this number .I tested maybe 10 ceramic coating but firball aegis even better than all ceramics.I cant imagine if i use silla what will happen.This numbers are wrong for fireball .This product not deserve this number

@MegaSurviverman Рік тому

Signature series detail. I have been installing coatings since 2009 when they were first allowed into the US. I have tried them all and as far as durability gloss and protection Fireball is the best hands down. It is also the highest and purest form of sio2 on the market.

@chanceanthony3628 Рік тому

You guys are top shelf in detailing, and the only ones on that shelf. So in depth and informative love you guys. Not gate keeping anything top level information with everything.

@daveblankenship4268 Рік тому

Wow Jason you and all the guys at CAP really outdid yourselves , what an amazing video and so much information bombs 😂it was incredible,I know not only myself but all your followers truly appreciate all your hard work and dedication to sharing your knowledge and all your testing ,You've really helped my wife and I to understand what it takes to become an accredited detailer,we plan on opening our own business next year so thank you so much😎 A quick little note we attempted to send an email to share some paint correction products we recently discovered and had good success with hopefully it made it 🤣 thanks again for everything you do and we look forward to all your future content 👍

@bbdetailing9123 Рік тому

Nicely done. So much info packed here.

@johnambrosia2604 2 роки тому

I’ve been waiting for this one! Fireball crew 💪

@nathangraves9178 Рік тому

Thank you so much for your hard work and very very informative video. You did all of the research for me so all I had to do was take notes and make a decision. You're the man! Instant subscribe and I'll be following the progress!! 🤘

@erich6879 2 роки тому

Well done comparison video. Clearly a ton of effort went in to doing this video...Thank you!

@ChicagoAutoPros 2 роки тому

Definitely was a lot of work to put together, thank you!

@Beerwoulfe76 Рік тому

Nicely done vid. Very informative with great content.

@yugalparmar3703 Рік тому

Amazing comparision Video, loved it Jason

@majestikautodetailing6163 2 роки тому

I'm with system x and absolutely love them

@ethanboyes620 2 роки тому

Been waiting for this video. I work with Fireball in Australia. Really back the coating and can see it doing really well in this challenge.

@garethlivesley2730 2 роки тому

Hi ethan, how good a product is it? ,is it easy to use/work with etc .any other info would be useful thanks

@ethanboyes620 2 роки тому

@@garethlivesley2730 I love it mate. I find it pretty easy to work with. Good product for the Australian conditions. Would highly recommend it to anyone looking to start using a new product

@connersmith2445 2 роки тому

Ethan, how does NV Nova Pro compare?

@MikesAutoDetailing 2 роки тому

Great job explaining all those coating, excellent video

@ChicagoAutoPros 2 роки тому

Thank you!

@neilwalker5041 2 роки тому

This is going to be an excellent series to watch. First thank you because the amount of leg work you have put in is a lot. Thank all the suppliers who allowed the average Joe to see the inner workings of their coating. I’m very curious to see the difference between the thicker and thinner coatings. Do they prevent scratches to the paint being thicker? Do some coatings need to be sanded or polished when the inevitable high spot shows up? This is excellent material for the small shops wanting to grow need to understand who charges memberships.

@lundmw 2 роки тому

Im excited for the follow up videos!

@Solismig002 Рік тому

I literally just watched this whole video about ceramic coating and it wasn’t boring good job

@ChicagoAutoPros Рік тому

We appreciate that!

@conwaysdetailing387 2 роки тому

Great video as always!

@ChicagoAutoPros 2 роки тому

Thanks!

@saad0601 Рік тому

Thank you Jason for the insightful information.

@Spirited282 Рік тому

Glad you also have Ceramic Pro on here, it gets mixed reviews from some even saying that it is cheap stuff but i am happy with mine. Great video and informative

@grand04gt 2 роки тому

A good website is an absolute must! I really came to that realization recently when i went shopping for something and you would be amazed at the amount of cheap or unreliable websites are out there and should yours look professional and stand out above the rest would make your business stand out as a premium

@completeturnarounddetailin3536 2 роки тому

Very informative video. Thank you.

@atk00011 2 роки тому

Jason! Love your stuff man, just got into detailing about a year ago and just started my LLC a month ago. Looking forward to this video series showing the results! Also can’t wait to take a course up in Chicago with you guys soon! Unless you plan on coming down to Atlanta! 😂

@ChicagoAutoPros 2 роки тому

Thanks Andrew! Can’t wait to meet you in the future.

@GoebelsDetailshop78 2 роки тому

Awesome video !!!

@emre33851 Рік тому

What a sincere and lovely video 👍👍

@staffordshirecarcare Рік тому

Thanks for the add buddy 👍🏻

@michaelcook9414 Рік тому

Curious to know which of these products can be used on headlights, glass and/ or trim. Is the durability different when used on a headlight due to heat exposure etc.?? I would love to see a separate video on headlight specific coatings with pros and cons, ease of application, cure times, ect. I currently use the invision headlight restoration and protective coating system but sometimes have issues with the polymer coating.

@shoman24v 2 роки тому

Very interested in following where this goes. Thanks for doing these kind of tests. They matter, the let us (and you) know which are worth the money.

@waxmanvids5015 2 роки тому

SUPERB JOB TEAM!!

@ChicagoAutoPros 2 роки тому

Thanks!

@mcmartinez7229 6 місяців тому

Best video I have seen every detail of what you need to know👌

@Wyn61 Рік тому

I just subbed here Dude! Awesome presentation of background info. I live in Fargo, ND.

@waynefitzsimmons Рік тому

I am looking forward to see the out comes Jason

@granddetailing 2 роки тому

Awesome! 👌 Can't wait for updates! 🙂 ...I'm curious about Enigma 🤔

@detailersgarage Рік тому

WOW, what an amazing video!! Well Done!! Always amazing work and information from Chicago Auto Pros🙏👍🇺🇸 Thank you for making.

@ChicagoAutoPros Рік тому

Thanks for watching!

@mcmartinez7229 6 місяців тому

I like this guys sincerity

@kenmartin756 2 роки тому

I am looking forward to the results of this test. I have Gtechniq Ultra on my wife's Audi SQ7, and my Audi RS6 Avant (Jason, you may remember it from the Gtechniq Summit last year in Tampa).

@muchachogrande2019 Рік тому

I watched this whole video and it's amazing, but I would absolutely love some timestamps or chapters added for each coating to make it easier to refer back to in the future

@Soyuhhh Рік тому

Thank you for doing this series for us diy plebs that can't get hold on these products and have to believe the claims these companies advertise.

@Sweeperspelar Рік тому

Just some info for the angelwax coating they also have a 3 year coating called Solaris and 1,5 year called legacy. Genesis but with graphen is called nebula. if you do two layers of either genesis,nebula or solaris it has life time warranty. You can also drag a knife and just heat the scratch away when having 2 layers.

@CryerMobileDetailing Рік тому

Great video Jason. I am a detailer in the Dallas, TX area and am an accredited installer of the Glidecoat Pro line of ceramics and was curious if you’ve heard of them before? I have had great results but you don’t hear much about them as they are a smaller company in Florida and their products are made in Ohio. Keep up the great work! Brad

@ivorwm2291 Рік тому

Thanks for the information

@nicorallysport Рік тому

Great test! The videos on the coatings as I like them! 👍 👍 👍, I just wish I had seen carpro professional or even carpro finest reserve (with gliss v2 as top coat, reload or elexir for maintenance) for the competition between carpro, gyeon and gtechniq!. Yes, a video on the different families of ceramics (Sio2, Tio2, sic, graphene and the different hybrid mixtures Sio2 +Tio2. Sio2 + graphene. Sio2 + graphene + fluorine) would be excellent and super interesting, for example the hardest, the most hydrophobic, brightest, darkest and more.... I'm very interested in that. Go Jason! 😉

@holycrusader5283 2 роки тому

Any ceramic coating which are easy to apply and has good durability is top tier coating to me.

@nc.detail 2 роки тому

Super curious on this one. I use several in the bunch but crazy to see some of these prices, especially gloss-it.

@moisesperez3693 Рік тому

OMG, this blew my mind 🤯. If you can ADD thickness to your clear coat, that my friend is a GAME changer. I can't wait for the results!!!! C'mon now....

@denzeljackson6505 10 місяців тому

Veros wow amazing with the donation's ur setting up ur company apart from the rest with ur generosity

@johnathancooper4663 2 роки тому

Hey Jason. Looked in the back of the table you had Roar Coatings. I can be blind as well. Lol. Did they opt out of the video? Cant wait to see the results of these test.

@ryanl8653 2 роки тому

Wondering the same.....

@Steathl 2 роки тому

One more thing, Opti-Coat teaches that coating process begins even with car washing: power clean, ONR, paint prep, and Hyper Polish (primer). All of them add polymers that would help Opti-Coat Pro bond effectively to the surface. So apparently if you do not do this steps, then you can not claim warranty if something fails

@greatestNothin 2 роки тому

Let's think about that...Power Clean(All Purpose to get the gunky stuff) then ONR wash to remove the regular dirts. Paint prep to remove EVERYTHING from the paint's surface. Leaves NOTHING behind. If anything, they would request/require using Hyper Polish with an ONR rinse...that would make sense as then the there would be polymers left behind. The rest sounds like BS. I'm an optimum fan boy by the way, LOVE rinseless washes and Hyper Polish doesn't get nearly enough love for how easy and quick it can go around a vehicle. No taping needed. Hell, it's a go to to remove old wax/polish residue.

@ryanl8653 2 роки тому

@@greatestNothin They do require Hyper polish before application. They include it with the kit and call it "prep polish"... but its exactly the same as hyper polish. It is even shown briefly in the video.

@P4SDetails Рік тому

Good breakdown.

@ChicagoAutoPros Рік тому

Thanks!

@no_lft_shft 2 роки тому

I haven't watched the video yet but I'm hoping R1 is one of the coatings you guys are testing. Because that's what I have lol

@bjimsondetailing Рік тому

nice job. my question is if I add a polishing compound , a cutting compound and a wax together stir it and use it on a car will it work as all in one step or I will still need to wax again?

@mygmail9115 Рік тому

I bought a 2017 camry I had Zurichshield coating applied when new there are spots every where on paint like its coming off how do I get it all off to have a new up dated coating applied . I like the detail you put into your videos...

@davidboyce6427 8 місяців тому

Jayson any thoughts on TAC SYSTEM Ceramic Coat Sealant ?

@conwaysdetailing387 2 роки тому

" because they know all they sold you was a guaranteed piece of sh**" The good ole VHS days. 😂

@alvinclifford8840 Рік тому

I like your work I would love to see your opinion on graphene coatings especially from Detroit solution thank you keep up the good work

@jayem6425 3 місяці тому

Great video guys, thx. Wish you had included ServFaces Coat Ultima too

@lahirusenanayake7979 2 роки тому

Great Video guys, wish you had included CarPro Finest Reserved too. 👌👍

@ChicagoAutoPros 2 роки тому

Thank you! Wish we could have included them.

@GoDetailerGo 2 роки тому

This could quite possibly go down as the best detailing video of THE YEAR! Great work brother! I couldnt help but notice how THICK Gyeon cured at (102). Is this an indicator of superior durabilty against UV, scratch resistance, droppings, harsh chemicals, general washes, etc? I mostly use the Gtech CSL & EXO at my shop. Ive been on the fence about where to invest for accreditation for a while now. Im really feeling like Gyeon is going to be the way I go eventually. Feynlab also posted impressive numbers but the install process seemed a little overwhelming.

@SiXSpeedSolo Рік тому

Ultra is by far the best ease of install to performance product in my opinion bro

@truthmatters2020 Рік тому

Hi Jason, I hope you, your family and your employees are doing great. What polishing product do you like or recommend before ceramic coating? Thank you

@STATUSDETAIL Рік тому

If you measure a 20 micron increase I'll eat my hat ... That's nearly a Mil of ceramic! One of those at the end said 25 didn't it!!! Also you forgot to mention ceramic pro is fireproof lol they seem to show that off a lot. If the other ones are not fireproof... Deal breaker. Love this video and excited to see the series 🙂👍

@frankoutten7242 2 роки тому

very interested in this video. I'm an installer for System X from Delaware and really like the product, I tried Gtechniq CSL before switching over but some professional grade companies are wont let you be within a certain distance from another shop and there a quite a few detail shops in my area. All you videos are informative and useful, I appreciate the amount of time and effort you put into this.

@Gleeleeglee Рік тому

Damn these ceramic coating manufacturers are so controlling just like Apple lol

@yendor86 Рік тому

Question: I have an old 69 Barracuda that I started restoring back in 2016 which is when it was painted. Very expensive, high quality 3 stage paint job. Life and finances got in the way and the car sat until the beginning of 2022. Now the car is almost complete. But my body man/restorer is recommending that I let them cut and buff the car since it’s been sitting for so long, in a garage, covers on and off. I said ok. But I want it ceramic coated when you’re done. He doesn’t recommend a ceramic coat unless we do a micro polish which is another expense. My thought is, why would it need micro polishing AFTER a cut and buff? Shouldn’t all the fine scratches be gone? As it sits now, there are no scratches in the paint anyway. Any thoughts?

@TheSvoboda Рік тому

I was hoping to see Roar on this list. Great video anyway

@dennisarcega837 Рік тому

Im amazed boss if you don't mind which is good pad for scratches and swirl you use or recommend for rotary machine because my campany using polytop foam pad work is good but need time any recomend for quicker for scratches pad tnx you

@JaySchu-C8Z06 2 роки тому

Hi Jason, Do you expect the results from this test to be similar if applied over PPF, or is this a completely different test? I was under the impression that the best protection for a supercar is PPF and then ceramic coating on top. If you agree, I would love a test to see what Ceramic coating is the best to be applied over PPF. Thanks in advance

@wrapstarsinc Рік тому

Yep agreed......and no we've noticed that ceramic coatings do not last as long on PPF as it's a porous film and the hydrophobic properties get lost quicker than the claims in real world tests from our customer installations.......especially for windshield protection films that have wipers involved - we use GTECHNIQ Halo but that's because not many make ones specific for PPF

@anonymousnoname Рік тому

Do you use only the prep/wipe spray from the same manufacturers of the ceramic coatings?

@jesseduenas08 Рік тому

Hey im a fairly new subscriber, love the channel. I work at a small locally owned detailing shop and we have a ceramic and graphene coating from a brand called Tonyin. Just wondering if you guys have heard of it. Idk how well it would hold up against other brands, but i've had good results from using it.

@hachiroku7443 Рік тому

DuraSlic xtreme are the best DIY ceramic coating period and easy to apoly just one coat and no BS. Duraciat are one company top notch been on business for years..they have the tool and research and experienced globally. Pair it with duraFlowX or duracoat as a top coat or regular sealant gives you unknown result compared to all products his been showing here and some of the top end I had tried but nothing get closer un terms of durability and slickness and I tested it during winter time here midwest. Highly recommend duraslic xtreme or just the 500 version and you won’t regret it.

@samiam1231231 2 роки тому

Love this content, and am curious to the outcome. Non the less probably will be putting a retail available brand on my own car, since jumping through hoops or money traps just to buy something seems bad for the every day consumer, or up an coming detailer.

@douggreen980 Рік тому

James, the retail coatings work great. I have used a number of them and find Gtechniq CSL + Exo works well for about 2-3 years. I also really like Artdeshine for their coatings and topper sealents (amazing slickness and gloss). IMO, a long duration coating isn't needed if you like to keep you car polished up ever 3 years or so to get microscatches out.

@Gleeleeglee Рік тому

@@douggreen980 What about Turtle Wax Hybrid Solutions Spray Coatings 53409. Did great in Project Farm test.

@douggreen980 Рік тому

@@Gleeleeglee Hi Gary, I haven't tried it, but certainly, there have been a lot of good reviews of the recent Turtle Wax products. I typically find that the spray-on products don't last as long as the bottle and applicator coatings, but that might be just fine for you if you like to spend time shining and protecting your ride a few times per year. Give it a try and see if it works for you!

@lennschut2322 Рік тому

Great video!! Just wondering, why is it we don’t see Carpro Finest Reserve in this test? You’ve worked with it yourself in the past right? Thanks!

@westy36fan Рік тому

Ever work with Chadwick's Graphene 4 year coating ? or know how good it is?

@robertm8518 Рік тому

Have you tried CS2 Titanium SH and how does it compare?

@evanstalker9658 Рік тому

Feynlab is known for the self healing coatings and being the first to manufacture them. They also own one other company who makes one. Feynlab is also one of the only companies who makes their coatings in house and doesn’t re label it through a blending house like many companies. They are true innovators and I love working with their coatings. They have the thickest coating on the market with Self Heal Plus. System x doesn’t come close to 20 microns… especially with one layer. That material can’t simply just thicken over time… with Self Heal Plus you are mixing up 4 bottles into 2 separate bottles of resin. Layer 1 goes on and layer 2 is applied directly on top after it’s set up. Then a leveling aid is used to wipe clear. Heal Lite is a 5 year single layer and the sister to Heal Plus. All Feynlab coatings are car fax approved and insurance covers them to be re applied if a accident happens and a panel is refinished.

@gregmiller9382 Рік тому

Hi, thank you for sharing information. I am about to buy RAM TRX and I was asking my dealer if they offer ceramic coating. They said they apply Simoniz Glass Coat. Have you use this product and if yes would you recommend this product? Thank you.

@shaktimodgil7965 Рік тому

Hello … I m in seattle and recently bought 2023 palisade. Its hyper white in color. Which ceramic brand you believe would be the best for my car?

@derek723 Рік тому

Really wish this were a controlled test. It's so hard to gain fair judgement putting 16 different products all over a car. 5, 6 and 7 are going to take an absolute beating from road grime, whereas 12, 13 and 14 are going to hardly see anything. Going on 5 years with no toppers on XPEL Fusion, and while the bottom of the car is tired, the hydrophobics on the rear quarter panels look brand new still

@pedrogriffin1934 Рік тому

Is Shine Supply Bead Lock Pro not good? Did not see it on the list?

@brentthedetailman2228 Рік тому

when will the next episode come out.. i cant wait to see

@georgeprado787 Рік тому

DO you have any thoughts on system x coatings?

@jaysidd 6 місяців тому

Which DIY coating you recommend for maximum gloss on PPF(Llumar).

@labautodetail8670 Рік тому

Whats your opinion on Labocosmetica’s product?

@hamididdy 2 роки тому

I install Roar....and I'm surprised they aren't in this test

@garethlivesley2730 2 роки тому

If the products have had there allotted curing time before going outside, then they still take upto a week etc to fully bond, will all the dust/rain etc etc not embed themselves into the bonding process??

@scottcrawford3745 2 роки тому

Not really. Most coatings cure from the Air-side in, towards the paint. So, exposure makes it harder on the outside first, which should inhibit particulate accretion. The SiO2 coatings are usually bonded during the application process, with the carriers being what you need to wipe off and buff away. Once you feel that final buff cloth starting to slide ever-so-smoothly across the paint, the outer layer is already on it's way to being hard enough to resist embedding.

@omidrajaee7996 Рік тому

Can you recommend a good installer in Southern California (Orange County).

@Cliffie505 Рік тому

Any idea when the next video is going to come out?

@wherry951 Рік тому

Why no Atri Pro Nano Graphene? Did you ever do the follow up video on how it went? We use this at our business and I was hoping to hear your opinion. I tried contacting your Facebook pages but recieved no response