I made a mistake at 5:39 where I talk about increasing cylinder diameter with a honing tool. While technically possible, it's a terrible approach as it'll take forever and will likely result in uneven cylinder walls. The cylinders need to be professionally bored and checked against one of the pistons (that will be installed) to ensure proper fitment/clearances.

This dude is literally going to build the perfect 3v

I wish there was someone like you for every car

This is gonna be a badass 3v, hoping in a few years I’ll be able to look back at these videos and use them as a reference when I have the money to build mine

Even though I’ve decided to go with a 5.0. I still wanna see the end result of your build. Gonna be a badass 3v 🙏🏾

This channel is a gold mine for 3V owners.

Good to see another upload. Everyone rags on the 3Vs but they're still nice for sure.

How this channel doesn't have 1M subscribers amazes me. Clear concise video with professional edits that enhance the subject matter being discussed. This channels better than most others out there.

My brain is so big after this video. Lots of knowledge

I have a boosted 3v making a conservative 420whp 😂😂 it’s hard to believe you might be pushing 420wheel NA. Hope to build my bottom end sometime. You should put a price list together in your description.

Just FYI, the honing tools that most shops have are for reconditioning the bores during a rebuild, not increasing displacement. They're basically just for getting the cross-hatch pattern back into the cylinder walls. Also for trans, the T56 Magnum is supposed to be a beast.

1. It's 2. Insanely 3. Expensive And 4. Very 5. Expensive

Don't think listen to the hate. I have been following your build since the beginning. Keep up the great work looking forward to see the dyno numbers on the engine rebuild!

Honestly the most underrated production and quality on any car channel on UKposts. Keep up the amazing work! Im unfortunately selling my 3v and replacing the hole in my heart with an Evo. I wish there was someone with your amazing UKposts content and information on the Evo!

Hope nothing but the best for you and this build! Thanks for making such good content, keep it up!

Obviously those people haven't ran across a properly boosted 4.6. 3v is an excellent modular for boost. 2v simplicity with 4v type head flow.

Pretty cool to see Four Eyes is still alive and well. Good luck on the build!

I love how you explain the basics then get car talk into it, makes it so much easier to understand for a noob like me who wants to learn about building and tuning my engine

I really appreciate all the Information you’ve given in this video. You explained so much and clearly up a lot of questions I couldn’t figure out! Good luck on the build and I’m happy for you.

Dude thank you so much man. I really respect this channel. And it’s pretty inspiring, with me not knowing what I want to do with my life right now at 22. I can’t wait to see how your Viper and Mustang turn out!

Great project! Thanks for doing this and keeping us updated. Cheers

I have a 3 valve and I've learned so much from watching this channel , keep up the great work !!!

Love me a proper 3v setup! 💪🚀🏎 It’s not the easiest route, but those that have well-built 3vs love them and they make a ton of power!

I bought a silver 3 v this summer and the information you have been providing as far as dyno run results and updates with parts has been invaluable. Also definitely recommend a cervini ram air hood, adds a whole new look to the car. Keep up the great work!

cool video. love how you go into the logic and analytics of your build unlike most other creators. interesting to watch as an engineering student.

I've just went through a ton of your videos. WOW. Thanks for documenting it. I can't wait to get into my 2005 4.6 and get my cams put in. I bought my car in 2004 and have just over 40,000 miles on it currently. She is definitely a garage queen.

You are literally building exactly what I'm planning on doing myself! Got the S197 last year, just gonna follow along behind ya. Great videos!

Currently in the process of building my 3v. Stumbled across your videos and absolutely love the attention to detail.

This is one of the better and more detailed videos I have seen in a while. Keep up the good content!

Thank you for breaking down everything about your plans and how it works to build an engine in your video, it was very informative and enjoyable

I can't wait for the results, keep updating!

Bro you really make understanding the functionality of a 4.6lL V8. Thanks bro for your time invested into your videos. You've made owning a mustang unregretable

also, this guy deserves wayyyyyy more subscribers. Keep it up bro!!

Your videos are always high quality. Pumped for the build bro 💪

I'm so pumped, I've been waiting for this upload!!

Loved the video and in depth explanation!!

As usual another great video and information, thank you for sharing the build

Your channel single handedly convinced me to buy a 5.0 mustang

Hey great research and content! Very informative , please make follow up when you can. I replaced my s197 with a fresher 74k 3v that I plan to do the same exact thing you are within the next 6 months. I stand behind the 3v all the way

Can't wait to see this thing in action. It's going to be badass. It's good to see a video for you. It's been a while.

Thabks Been waiting on a video cant wait to hear it its gonna sound good changing the internals

always really happy to see the notification for your videos.. outstanding work per usual man keep it up :)

Excellent video man. I like how your content actually aligns with the video title. Wish more were this honest and skilled at their craft.

I’m glad you’re building your 3v. I also have an 07 which I plan to build one day and I’ve always wanted to run a setup almost identical to what you have. Twin turbo, Manley connecting rods and such. When I first got the car I wanted to coyote swap it, but after attending mustang week in myrtle beach SC for a couple years, I decided I want to build the 3v, because it’s so rare to see a built 3v even at an event all about mustangs. All you see is coyotes everywhere and every 4.6 is bone stock. I don’t want to just be another coyote car, I want something different and that’s why I want to build the 3v and I’m guessing it’s the same reason for most other people who want to build theirs too.

Dude everytime I see you upload I low key get excited to see whats new like its my own.

I love that you have the Google sheet linked for the parts, big help for sure!

Always love to see a new upload from Four Eyes. Doing all this R&D for us fellow 3v owners is dope, and the way he presents his content is top notch every single time. I feel like I read somewhere that he's an engineer or in marketing/accounting or something? Can't remember, but surely I can't be the only one curious about his professional occupation!

I’ve been looking forward for this

Great thing to wake up to big guy, can’t wait for results ✌🏼

Awesome video, thanks for the info. can’t wait to start building my 3v mustang.

Great informative video as always .

I have to say your videos are very informative ! I have just bought a 06 gt as a project car ,and came across your videos . Thank you .

Such an awesome and informative video! Keep it up, brother. I'll be here to watch

Been awhile since you’ve posted, love your car & build. Makes my close to stock Tightie Whitie so boring but its a driver. I want rear end gears & cams bad. But a new apartment & furniture took that out of the equation for this year. I think I’ve seen all of your videos but wondering if you’ve done axle gears & steering components? Keep up the good work & hope to see new stuff from you soon

Just had my 05' 3v built in a similar way as yours. I wish you made this video a year ago haha so I knew what to look for. Great video and great way of explaining everything! 👍

Theres something about engine building that put a smile on my face I cant wait to see it done

Hey foureyes, I'm super stoked that you're doing this. I have an 06 GT and am in the process of looking into your same build. This will be one monster of hp and torque.. after your build is complete and when you get the time to, do a video of the COMPLETE AND TOTAL breakdown of cost and anything else you needed to modify or upgrade too. I am in absolute love with your car and it's look thus far and keeping it sleeper or stock looking is what I'm doing also, with the exception of wider wheels and rubber. Good luck and until next upload!

Awesome built. Loved the looks too. Beautiful car.

Actual goldmine of information. I learned so much.

Hell yeah, i always look forward to new video's of you, great production quality and very good explanation! Thanks for keeping this series going, it is my favorite of youtube!

I love your video because they’re are so much better quality than everyone else’s vids. I actually learned stuff from this. THANK YOU

Looks good. I am doing a similar build this winter.

i appreciate this video four eyes, you really address all complaints with the right words!

Your video has been more informative and interesting than amy other videos I've tried to see to learn this. Thank you so much for this info as I too in the future am planning to build my 3v. Keep up the good work and can't wait to see how the beast comes out

Been waiting for this for a while now. Love you videos man. Keep up the good work!

I got a 3v 2007 mustang and I I have similar power goals to you. Thank you for showing the process for your mustang and everything that goes into it! I have yet to see a single other channel dive into it as you have.

This is the best video I’ve seen even if you’re not specifically talking about the 4.6 it has great info for everyone

This video was incredibly helpful and informative.

I just picked up a 2020 gt pp1. It's a blast! I've never cared about cornering but since I have few miles under my belt with this car i find myself pushing this thing over my skill set. Mods planned: lowering springs, bmr cradle lockout, aftermarket exhaust and mgw shifter.

Been so excited for this video. In the time it took you to make this vid I got a paxton and new wheels lol

Keep the vids coming man!!!!

Thank you for the informative video

Also, a good way to skirt by if you can with a transmission that can handle less is to use a very good clutch, such as a triple disc carbon fiber clutch, it will help your transmission life and even increase what it can handle

Looking good boss! Nice collection of parts there.

Great video as always, I even like before watching because i know its about to be an awesome video. Keep up the great content, you deserve more subs.

Thank you so much, I needed this information as I am starting to rebuild engines for my local race club.

this is my dream build for my 3v cant wait to see the this car completed

Glad your back

I learned way too much drinking my morning coffee this morning thanks to you. Also, your fog lights have been flawless on the front of my GT, and have now seen the roads between Nashville and New Hampshire. They’re now learning the backroads of rural NH after moving back up here two weeks ago.

Great videos as always. Thanks for not just showing the turbo slapped on. Good explaining the stuff that matters. A lot of respect for you.

Excellent job man, Thank a lot.

Can't wait to watch the next video, keep it up

Very informative. Subscribed

Bro, this 3V Mustang is siiiick! I'd love to see more on this mustang. Well done, you've just won yourself a subscriber. :)

This is awesome! I’m building a Ford 400 motor in autos class and I just wanted to know more about doing engine rebuilds and how it all works.

This video is awesome.. Grew up around muscle car builders another thing to always make sure is never lean out the motor could turn to a run away and blowing the motor up and or adding viewing windows in the block.

Love how you explain things. Even I can understand

Oh yes! FInally! I've been waiting!

I love how you teach us as you learn. Very informative and interesting video. Can't wait to see the 3V turn into a beast! Excited for you man!

I just supercharger my stock 3V and I plan to buy another motor and do all the work before swapping. I've done research but this is awesome. KEEP IT UP

If there’s any work you do yourself I’d love to see videos on it. Your Detroit rocker cam install is the best quality tutorial I’ve ever seen on auto work.

I love my 3v sounds so freakin good and feels so raw compared to the new 5.0. Also great engines

Good video. Wish you luck and looking forward to see how this turns out.

Great video, I learned a lot from this

Closer and closer. Keep it up 👍

Really looking forward to the build🔥

I was looking at fuel setups earlier tonight and was going to order the 1000hp On3 fuel setup tonight as well for my 3v. Sounds like a good choice for the money.

It's been a long time. Glad you finally uploaded something. Looking forward to seeing the final results

This exactly what I have been looking for!!

I dont even have a 3v and I still love watching these videos!