THIS DEVICE MAKES WORKING AT THE TABLE SAW A LOT SAFER | DIY GRIPPER PUSHBLOCK
Переглядів 172,233
4 роки томуTo make working on the table saw safer, I built a Gripper. I already have a few safety devices like my Push Stick or my Push Blocks for the router table. This Gripper is very easy to build and it works fantastic.
ISBI
----------------------------------------------------------------------------------------------------------------
If you want to support my UKposts-Channel you can donate here :
www.paypal.me/isimplybuiltit
----------------------------------------------------------------------------------------------------------------
FOLLOW ME ON
INSTAGRAMM :
/ i_simply_built_it
TWITTER :
/ isimplybuiltit
PINTEREST
www.pinterest.ch/isimplybuiltit/
FACEBOOK :
/ isimplybuiltit
-------------------------------------------------------------------------------
#ISimplyBuiltIt #like #comment
-------------------------------------------------------------------------------
@Manuel_E. 4 роки тому
This cool Gripper is waiting on my to do list. Well done!
@jimsilva5344 Рік тому
So very glad I found you! Immediately downloaded the 1st video I have seen so I can follow along and make the build in my shop. I would pay $$$ to purchase plans, please consider offering this in the future.
@The9mmProfessor 3 роки тому
💥mind blown.....from 6:08 on...My friend, those 11 and I half minutes I just spent here were very well spent. . At the Least. Thank you .
@derekstephens6768 3 роки тому
Very good, simple but effective design. I made one this week and am very pleased with the result, and its functionality and safety. Many thanks for sharing your creativity and expertise.
@artconnolly9519 4 роки тому
Love your channel and everything you build. This is why I watch youtube! Thank you for posting
@ISIMPLYBUILTIT 4 роки тому
Thank you so much. I'm glad to read that.
@vilod 3 роки тому
I love the background sound instead of music. Great edits too.
@stevedockery3534 Рік тому
Fantastic job my friend. I will have to watch this a few more times to be capable of making one for myself. Thanks for the great video.
@danceswithaardvarks3284 4 роки тому
That is so similar to the ones I made that I thought it was the same at first. Great job.
@ISIMPLYBUILTIT 4 роки тому
Thanks
@stephanedenis5394 4 роки тому
Beautiful construction for a security tool that I really believe is effective. Thanks for sharing.
@ISIMPLYBUILTIT 4 роки тому
Thanks
@jmendo67 Рік тому
Fantastic job, I will try to do it myself. Thank you
@PapaGleb 4 роки тому
Another great video. Real pleasure watching you work!!!
@ISIMPLYBUILTIT 4 роки тому
Thank you so much. I'm glad to read that.
@CornerfieldShop 4 роки тому
Cool! Love to build this one day 😄👍
@stopdrinkingleftskoolaid6510 Рік тому
Seriously? 😂 I learned SOOOO much!!!! I made the exact same one in as much time as this video ran for. I just followed your steps and kept up!!!
@JohnSnow-vf8jo 6 місяців тому
Nice one , LOL
@renobtankit6019 4 роки тому
great vid and build, thanks
@Painless61 4 роки тому
No Talking makes your Videos 80% better ... 👍🏽
@ISIMPLYBUILTIT 4 роки тому
Ok. I just speak in more complicated Projects.
@BobBob-eh5sb 2 місяці тому
I’m glad I didn’t see a comment saying to just go buy one. Sure it would be easier, there is some pride in building your own. The big plus with yours is that if it’s not adjusted quite right for the cut and the blade runs into it, the piece that got cut and be easily replaced. I think that if I was going to make one of these, I’d make 2 of them and some spare parts. That way if one gets cut up you have a spare handy to continue. Then when done with the project replace the damaged part with a spare one. And maybe make a wider one or two for better control of larger pieces.
@mvazquez2616 4 роки тому
"magnifik carpentry skillz"! thanx 4 the share buddy... ciao
@scarboroughmalc 3 роки тому
Your creations are fantastic but could you PLEASE give measurements for each project when you make the video it would help up your subscribers immensely when we try to build your projects.
@princessanineveh 2 роки тому
Guess not..
@30eesh 2 роки тому
@@princessanineveh 😂
@jaykepley5238 4 роки тому
Very nicely done, as always!
@ISIMPLYBUILTIT 4 роки тому
Thanks.
@MindenMoose 4 роки тому
I really enjoy your videos and your knowledge. I am new to your channel but so happy i found you. Creative intelligent and well produced, these are among the finest instructional videos I have seen. Incidentally the hand holds on your cross cut sled are pure genius. Thanks.
@ISIMPLYBUILTIT 4 роки тому
Thank you so much. I'm glad to read that. I really appreciate that.
@martythompson1933 2 роки тому
Dude....impressive very impressive!!
@RandyandPetraJ 3 роки тому
Sehr gut! Like others, wish you had plans. Guess I'll have to design myself. ;-) Danke for the inspiration.
@terry2346 3 роки тому
Very Very Nice! New project for the summer when I can get into my garage! Too cold here in Minnesota right now! :)
@primacustomworks 2 роки тому
New subcriber because of this video, thank you very much for sharing, you just save me a fortune. :)
@rodpotts2666 4 роки тому
Another good one my friend.
@ISIMPLYBUILTIT 4 роки тому
Thank you.
@iye2008 4 роки тому
Great work! Thank you for sharing!
@ISIMPLYBUILTIT 4 роки тому
Thanks
@grahamh1067 4 роки тому
now that is impressive! i will try to build one of those one day
@ISIMPLYBUILTIT 4 роки тому
Thanks
@adrianperalta7192 4 роки тому
Excelente!, hiciste fabricas la herramienta casera👍.Gracias a tu video inspirado
@ISIMPLYBUILTIT 4 роки тому
Gracias. Me alegro si te gusta
2 місяці тому
Muito bom trabalho...parabéns 😊
@trevhaydon5090 4 роки тому
Great Build Sir.👍😁
@ISIMPLYBUILTIT 4 роки тому
Thanks.
@georgeeads8689 4 роки тому
Excellent. Very well done.
@ISIMPLYBUILTIT 4 роки тому
Thanks.
@franklettering 4 роки тому
Tip Top video and none of the usual UKposts faff.
@edover50 4 роки тому
Nicely done, looking forward to making this now
@ISIMPLYBUILTIT 4 роки тому
Thanks
@fam.wagner186 4 роки тому
Top Teil, super gemacht prima Idee
@ISIMPLYBUILTIT 4 роки тому
Vielen Dank
@Simsy5861 4 роки тому
Really nice project!
@ISIMPLYBUILTIT 4 роки тому
Thanks.
@Bianchi77 3 роки тому
cool idea, thanks :)
@josefranciscorojasluna3757 10 місяців тому
Nice work.
4 роки тому
Hello there. good idea. beautiful device working on a table. congratulations. greetings..
@ISIMPLYBUILTIT 4 роки тому
Thank you.
@Randorf100 Рік тому
thank you dude.
@TheLastPharm 2 роки тому
How many people were also distracted by that amazing homemade sanding block he has?
@52Warlock 4 роки тому
Brilliant!
@ISIMPLYBUILTIT 4 роки тому
Thank you.
@jarmstrong2843 Рік тому
Nice idea on table saw sled for hand holes. They definitely keep hands away from blade.
@salvatoresalvio204 Рік тому
OTTIMO VIDEO. ESAUSTIVO E INTERESSANTE NELLE SEGUEZE VIDEO. SALUTI SALVIO
@marklewis9959 4 роки тому
Great job 👌
@ISIMPLYBUILTIT 4 роки тому
Thank you.
@kennethlemke9826 3 роки тому
Excellent
@HeatherTheHippyGardener 3 роки тому
Would love plans for this. :)
@mountainviewturning5319 4 роки тому
Great video nice ideal 👍
@ISIMPLYBUILTIT 4 роки тому
Thanks
@davesnedeker8068 2 роки тому
good work.
@MadAsKiwi 4 роки тому
Nice work. I was wondering if you are willing to make the dimensions or plans available? Your version seems much more straight forward than others I have seen, so it would be nice to give it a go. Thank you for sharing
@ISIMPLYBUILTIT 4 роки тому
Thanks. Maybe i can make plans sometimes.
@MadAsKiwi 4 роки тому
@@ISIMPLYBUILTIT , thank you. I think there are a few people that would appreciate that
@miguelromero1 4 роки тому
MadAsKiwi i know i would
@SageRonin 4 роки тому
Me too!
@richardnoble7170 4 роки тому
Me three
@pascalhoarau5030 День тому
Good morning Do you have the plan of the clamp pusher block please? Thank you so much. Beautiful achievement.
@rubenalfonzo33 4 роки тому
hello brother a query I write from Venezuela and I congratulate you for all your projects
@ISIMPLYBUILTIT 4 роки тому
Thank you so much.
@rubenalfonzo33 4 роки тому
friend good afternoon I can ask you to see if you make several pieces of bone wood "tools can you make ???
@JuliC 4 роки тому
Great build. Would love to purchase the plans for it please.
@timlist4173 3 роки тому
do you have the plans available for this push gripper? How about that sanding block? That is really cool.
@rejeanwolfe3756 2 роки тому
I wish I could order the available plans.Great Gripper. Tks a lot
@TheWhatsitgonnabe 3 роки тому
Nice Push block & (Sanding block at 5:16). I gotta find the video to make one of those! :)
@braniams 4 роки тому
Nice job. New subscriber
@ISIMPLYBUILTIT 4 роки тому
Thanks.
@davestevens7768 3 роки тому
is there any chance that you could supply a schematic for this brilliant push block?
@harrysstuff247 Рік тому
Amazing job, gave me a bit of anxiety at the very end though near that blade.
@CharlesNolanArt 2 роки тому
As fast as you ran the video I found it difficult to follow so I slowed it down but I still could not follow the work you did here. Don't get me wrong, it is stunning, much better than a purchased one. I could never do this. It was fun to watch you however.
@loknut6614 10 місяців тому
What material do you use for grip at the base of the push block? Thanks
@rosivo3142 2 роки тому
yeeeaaaaahhhh nice
@TheWoodWorkingPilot 4 роки тому
Well done! Do you have any plans for it?
@daisycorta3340 4 роки тому
He has plans for safety
@ISIMPLYBUILTIT 4 роки тому
Maybe i can make plans sometimes.
@TheWoodWorkingPilot 4 роки тому
I SIMPLY BUILT IT looking foreword for it. I’d love to make one
@TigerCarpenter 2 роки тому
very nice! grr-rip(per) off :P
@anatolborowicz2294 2 роки тому
Świetny filmik ! Szkoda tylko, że nie ma podanych wymiarów ...
@fransrasmussen3052 3 роки тому
i like this project, but i got 2 questions for you. nr.1. is that ander 1 you built and nr.2. do you have plans for both of them?
@colemahaney4208 2 роки тому
I made 2 lov them
@rejeanwolfe3756 Рік тому
Any plans available? Tks for sharing
@gregghernandez2714 Рік тому
Wow! That turned out so nice, I wouldn't even want to use it. I would be afraid to cut into it. Great job.
@trokt2 3 місяці тому
What size router bit? What width plywood? Thanks in advance. Great video.
@daniemeyer5865 2 роки тому
Plans would be nice.Thanx.
@misterleclair 4 роки тому
Beautiful work as always. What is the name of the clamp with the little black handle?
@ISIMPLYBUILTIT 4 роки тому
Thanks. I think you mean this one www.amazon.com/Bessey-KLI3-012-12-Inch-Ratcheting-KliKlamp/dp/B00008K2TE/ref=sr_1_47?keywords=bessey+clamp&qid=1573193707&sr=8-47
@lorespinra 2 роки тому
great
@larsonbennett5903 4 роки тому
Very nice! What was the material you used to make it grip?
@ISIMPLYBUILTIT 4 роки тому
Thanks. It's something like this. www.amazon.com/dp/B07MNW8QR1/ref=sr_1_52?__mk_de_DE=ÅMÅŽÕÑ&crid=ZVYVT0IOIV88&keywords=self+adhesive+acoustic+foam&qid=1573823813&sprefix=self+adhesive+ac%2Caps%2C241&sr=8-52
@jonanovas 4 роки тому
Great video. Thanks for sharing. Do you have some drawings with the size of all pieces. If you don't mind could you share those in the video description? Best regards Valentin
@ISIMPLYBUILTIT 4 роки тому
No i made it without plans. Maybe i can make plans sometimes.
@StreetKingz4Life 4 роки тому
Great review may i ask what type of countersunk drill bit you used on the bosch drill please.
@ISIMPLYBUILTIT 4 роки тому
I use a countersunk drill from Wolfcraft : www.amazon.de/Wolfcraft-2544000-Senkbohrer-mit-Tiefenstopp/dp/B002OHNH16/ref=sr_1_13?__mk_de_DE=ÅMÅŽÕÑ&crid=21TALI39FSR40&keywords=wolfcraft+senker+mit+tiefenstop&qid=1573822399&sprefix=wolfcraft+senker%2Caps%2C161&sr=8-13 . But this one should work in the same way : www.amazon.com/dp/B07KKLCGRY/ref=sr_1_16?__mk_de_DE=ÅMÅŽÕÑ&keywords=countersunk+drill+with+depth+stop&qid=1573822567&sr=8-16 . You just have to choose the one with the diameter you need.
@StreetKingz4Life 4 роки тому
@@ISIMPLYBUILTIT Thanks a lot
@63Arnast 2 роки тому
Hi.. Was there ever any plans for this done?
@norastackhouse Рік тому
I was wanting plans for this if you have them available. Can you please let me know where.
@bernarddouthit4647 2 роки тому
This looks really cool, but are the design documents posted somewhere? It's hard to follow every step from the video. Thanks.
@joaoluis1744 2 роки тому
Ta muito fixe
@francisr6804 4 роки тому
Nicely done, how you call this router bit type ?
@ISIMPLYBUILTIT 4 роки тому
Thanks. It's a T-Nut Router Bit
@barnyardkh4 4 роки тому
Sometimes called a key-hole bit too.
@Papa_D 4 роки тому
Very nice ! Where did you get the rubber to glue on the bottom ? :-)
@ISIMPLYBUILTIT 4 роки тому
Thanks. I ordered it from Amazon.de : www.amazon.de/gp/product/B00BSAAB1E/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 . Maybe this from Amazon.com could work : www.amazon.com/Weather-Density-Adhesive-Weatherstrip-Insulation/dp/B07477J8KL/ref=sr_1_17?crid=16MTA9VZIZDN9&keywords=self+adhesive+sealing+strip+tape&qid=1573193947&sprefix=self+adhesive+seal%2Caps%2C227&sr=8-17
@banditva8040 4 місяці тому
Any plans for this push block
@richardmilner4392 Рік тому
do you have blueprints for this or at least the measurements for it
@ZeroaxeSA 4 роки тому
I didn't see any comment in the comments. The only other thing I would consider to add(in case I have missed it in your model), is like a little 'hook' on the 'arm' that slides along your fence (our far left as we see the video) to help push the wood along. Just the same way than a normal push stick. hope that makes sense. Other than that I love your model.
@ISIMPLYBUILTIT 4 роки тому
Thanks. That's a nice idea.
@Mr_Rick 2 роки тому
Any plans or dim info?
@andy349ber3 Рік тому
Do you have any plans for any of your stuff please let me know
@pauligysin 4 роки тому
Glückwunsch !! das ist ein interessantes Teil (sorry bei einem Schweizer antworte ich nur auf Schriftdeutsch, mein Basler Dialekt wäre nicht so gut) Das Ding werde ich mir nachbauen da ich die amerikanischen Plastikteile hasse. In meiner Werkstatt will ab und zu die halbe Familie (alles Südamerikaner) etwas mit helfen und dann wird es gefährlich, denn ich bin der einzige Handwerker der sein Handwerk auch von Grund auf gelernt hat und so habe ich auch Respekt vor den Maschinen. Frage: wo hast Du diesen T-Nut Fräser her (den möchte ich mir bei meiner nächsten Reise in die Schweiz kaufen, das bekomme ich hier in Südamerika nicht
@ISIMPLYBUILTIT 4 роки тому
Freut mich wenn es Dir gefällt. Meiner Frau und meiner Tochter ist es zu laut in meiner Werkstatt. Ich habe den T-Nut Fräset in Deutschland bestellt. Ist ein wenig günstiger. Habe ihn hier bei Amazon.de bestellt : www.amazon.de/gp/product/B07F8BDL8P/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
@docolemnsx 3 роки тому
It's astonishing how many people are asking for plans on a channel called I SIMPLY BUILT IT.
@marlonestrella8105 2 роки тому
Should have plans for it…. If not free a little charge for the plans would help out the woodsmiths community.
@JohnWaclawski 3 роки тому
Any plans for this? Would gladly send some money to you if there were plans for your projects.
@andyboybennett 4 роки тому
Why is your splitter set so high? Doesn't it only need to be level with the blade?
@franceshawe9572 3 роки тому
Possibly to enable installation of a dust guard
@sureshkumar4140 3 роки тому
Please send me measurements, I would like to make one
@chandanmazumder1441 Місяць тому
It's is an excellent inovation of a Pushp - stick into a Push - block to serve all purposes. Can you please make one for me. My name is CHANDAN MAZUMDER an DC I live in New Delhi, the capital of INDIA. How can I contact you personally for this ? Thanks and Regards 😊
@ljlatorre1943 4 роки тому
Could you make available plans or parts list??
@ISIMPLYBUILTIT 4 роки тому
Maybe i can make plans sometimes.
@harrypowers9412 4 роки тому
I Really like your videos-I wish you could slow down the fast forward action a bit though, so it would be easier to follow. 👍🏻
@trickster11300 4 роки тому
Harry Powers I’ve got to agree! I sometimes feel like he is trying to induce an epileptic fit. Great videos well presented and explained, spoiled by the speed.
@barnyardkh4 4 роки тому
I would suggest building this with wood and CA glue and eliminate a lot of the metal hardware. I'd want to eliminate as much risk as possible of hitting a screw or bolt with the saw if I accidentally ran it over the blade. Nice MicroJig copy though.
@ISIMPLYBUILTIT 4 роки тому
Thanks. I think this screws should not be a problem because they will never came near the blade.
@paulusx11 4 роки тому
What anti slip material did you use plss. TIA
@ISIMPLYBUILTIT 4 роки тому
I ordered it from Amazon.de : www.amazon.de/gp/product/B00BSAAB1E/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 . Maybe this from Amazon.com could work : www.amazon.com/Weather-Density-Adhesive-Weatherstrip-Insulation/dp/B07477J8KL/ref=sr_1_17?crid=16MTA9VZIZDN9&keywords=self+adhesive+sealing+strip+tape&qid=1573193947&sprefix=self+adhesive+seal%2Caps%2C227&sr=8-17
@banditva8040 3 роки тому
Do you have plans for this push block.
@lxxs3v3nxxl 2 роки тому
Make the plans ! Lol
@Nolanryan1968 4 роки тому
Hi very nice like you build do you have the plans for it. I would like to build one for my daughter. she is starting to build in my shop. So pround
@ISIMPLYBUILTIT 4 роки тому
Thanks. No i have no plans yet. I made it without plans.
DIY Montreal
Переглядів 79 тис.
Бомбардир
Переглядів 263 тис.
Tree-An Wood 이동식목조주택 트리안우드
Переглядів 11 тис.
plywoodworking
Переглядів 48 тис.
I SIMPLY BUILT IT
Переглядів 274 тис.
I SIMPLY BUILT IT
Переглядів 238 тис.
Fabiosa Best Lifehacks
Переглядів 30 млн