Ultrasonic Cleaners.. Do they actually work ?

День тому

Does an Ultrasonic cleaner actually work as magically as they say ?
PayPal Tip Cup :- moonfleet10@yahoo.co.uk
Patreon Link:- / delboysgarage
Like many busy channels these days, we support what we do here with the generous help of Patrons who make this channel possible.. We commit 60 hours a week to what we do, and make every video a polished production worthy of our viewer's time and support, We also strive to pass on information and knowledge that our viewers can use to save themselves money and keep their bikes safe on the road too..
If you would like to join the team and help support our online activities, if you have maybe been helped and guided by our videos, or maybe just entertained.. then you can do that from just one dollar a month by clicking the link above and becoming a Patron of the channel...Thank you all so much for your support..
Alternatively If you just want to say thanks for this video alone, you can drop a dollar in our "Tip Cup' by using Paypal to moonfleet10@yahoo.co.uk The money will go to make more videos and keep this channel in your hands and not the advertisers.
Sealey Ultrasonic 3 Litre:-
www.spanner-monkey.co.uk/ultr...
Sealey Ultrasonic 9 Litre:-
www.spanner-monkey.co.uk/ultr...
Sealey Ultrasonic 27 Litre:-
www.spanner-monkey.co.uk/ultr...
Ultrasonic Cleaning Fluid:-
www.spanner-monkey.co.uk/ultr...
Spanner Monkey Tool Site :-www.spanner-monkey.co.uk
Gedore Red 172 Piece Socket Set:=
www.spanner-monkey.co.uk/Gedo...
Spanner Monkey Special Offers :-
www.spanner-monkey.co.uk/spec...
Delboy's Garage Merchandise Shop:-
teespring.com/stores/delboys-...
Wiha Tools available from RECON Electrical :-
www.reconelectrical.co.uk/
Follow us on Facebook :-
/ delboysgarage
..and if you haven't already, then please subscribe :- / moonfleet41
Become a Patron and join the team :-
www.patreon.com/user?u=2841534

КОМЕНТАРІ: 129

@rickmacpherson1413 2 місяці тому

I purchased a Utrasonic Cleaner several years ago, and I would be totally lost with out it. Cleaning carburetor’s is a must. Highly recommended it !

@mikaelkanerva1591 2 місяці тому

When cleaning smaller parts you can also fill the cleaner with something like soap water and put the parts and cleaning solution in a glass container, then the container in the water. Saves you from using litres of cleaning fluid mixture when you only need desilitres. This was the way we used them in watchmaking school as the cleaning solution was rather strong and special and filling the whole cleaner with it wasn't practical.

@Moonfleet41 2 місяці тому

Thanks so much for passing that on, i read about that.. maybe for using a different chosen solution for one single small job...just dunk it in with the jar and let it do the magic..!

@wobblysauce 2 місяці тому

That is it, some parts like different cleaning fluids and you can mix and match all at the same time. Some even use plastic containers for sensitive components as it can reduce the intensity of the process.

@paulregner5335 2 місяці тому

When I was spinning wrenches on M1A1 battle tanks, we had ultrasonic vats on hand specifically for cleaning the fuel nozzle on the AGT1500 turbine engine. Be careful of the variety of cleaning fluid you use if you're going to clean certain non-ferrous metals. A buddy of mine cleaned his carburetor in our tank at work, and while it did indeed get it very clean, the fluid turned everything aluminum jet black in color.

@Moonfleet41 2 місяці тому

Wise words well said.. it always pays to be aware of the chemical effect of cleaning agents..!

@5jjt Місяць тому

That's what anodizing is; Oxidation of aluminum.

@andrewgent5887 2 місяці тому

I was advised never to put roller or ball bearing’s into ultra sonic cleaners, apparently it causes brinelling of the surface resulting in bearing failure.

@FasterBastard1 2 місяці тому

Given enough time, all bearings will fail.

@andrewgent5887 2 місяці тому

@@FasterBastard1 ..but will fail prematurely if put through an ultrasonic cleaner, was the advice I was given.

@davidbenson5451 2 місяці тому

Hi Del and Penny, nice video! thanks for posting. It’s remarkable timing for this video because I just bought a 30L ultrasonic bath from Vevor. I’m using mine to clean the carburetors from my 2002 bandit 1200. I bought the large bath because I wanted to make sure I could put the entire bank for carburetors in the tank without having to break them down. About 10 years ago I lucked out, and bought a used wet abrasive blasting cabinet. Sometimes it’s called vapor honing . This has been my one tool deal of a lifetime. A neighbor was going to scrap this cabinet. I bought it for $100. If you’ve ever looked at this technology, you’ll know they’re very expensive when new. The ultrasonic bath is a perfect compliment to wet or dry blasting to remove abrasive residue. I also bought a used set of gen 3 bandit 1200 carbs off of a European used motorcycle parts website. I’m gonna clean those up as well. They are practice pieces for vapor honing and using the ultrasonic cleaner. With luck, I’ll have two sets of refurbished bandit carbs when I’m done. I’ll resell on set and i hope recoup the money i spent on the ultasonic bath. I was curious if you could use cleaning solutions other than water and soap safely on an aluminum carburetor. based on your video it looks like you can. I was also curious if the ultrasonic bath would takeoff carbon deposits because I was thinking that would have to be done in a blast cabinet or by hand with a wire brush like you describe. Do you have any thought on how hot to run the ultrasonic bath when cleaning a carburetor? Im removing all the jets, floats, needles, etc? Thanks again!

@Moonfleet41 2 місяці тому

Thanks for your long message, I'm by no means an expert on it, but from reading I understand that 65c is the maximum temperature before the water begins the process towards boiling and steam bubbles begin to develop...not only that, 65c on my tank is the max. temperature it goes to! And I would imagine that's safe for carbs as they quite probably get a lot hotter than that wedged in behind the engine on a hot day... but if you're a little concerned, perhaps run it a little cooler just to be on the safe side! Good luck with it...!

@tommylitchfield3450 2 місяці тому

That piston cleaning was very impressive! The amount that was taken off in 15 minutes really surprised me, and then, with a slosh more, slightly warmer juice and a little more time, Presto-Chango!! New looking parts!. The piston ring rattle test really showed how good that thingy works! Enjoy your new toy, you two, and enjoy the weekend :)

@Moonfleet41 2 місяці тому

Theres the cruxt point of it, those rings were cleaned out like new without even removing them.. means those little areas you can never get to can now be got at..! Have a great weekend Tommy and stay safe !

@steveflorey8663 2 місяці тому

Having been a Jeweller and Clockmaker for over forty years using these machines, once you start you never look back and you just keep finding more uses for them. I have two to cover the work I do on cars and bikes as well as the jewellery and clocks. You find they save you so much time and allow you to be doing other things while they are doing the cleaning for you.

@Moonfleet41 2 місяці тому

Great to hear Steve. and with such a glowing endoursement from someone in your line of work, i guess they're everything people say they are.. Im glad i made the investment, anf im sure i will be using it a lot now. !

@JDnBeastlet 2 місяці тому

Hiya Penny and Del - great video! I have had an ultrasonic cleaner for a couple of years and I've found it very useful, most recently in cleaning the parts of my Bandit's vacuum fuel tap during the process of rebuilding it. One tip I have for smaller parts is to use a small container (like a leftover pill bottle) - if you drill a few small holes to prevent it from floating, all the better. And if you have something really dirty and don't want to contaminate the liquid in the tank, fill a separate container with liquid and put it inside. So glad to see you've added this very useful tool to your shop! Take care, dear friends - take it easy, ride safe, and have a great weekend!

@Moonfleet41 2 місяці тому

Thanks so much buddy.. i read about that.. simple way to clean small parts you want to isolate.. specially good for Penny's jewellery parts with the tank now having carbon residue in it.. Take care and have a wonderful weekend, and as always, thank you for your amazing support. D&Pxx

@dhc4ever 2 місяці тому

One thing to NEVER put in the ultrasonic cleaner is polarised sunglasses, modern sunnies use a film over the lense to achieve the colour and polarisation, the cavitation in the ultra sonic will remove this very effectively, ask me how I know . One the other hand ultra sonics do a fantastic job cleaning normal glasses , jewellery and watch bands, dont put the actual watch in there. I picked up one of this sized machines about 3 years ago, does a brilliant job on carburettors and as Delboy has demonstrated just about anything else, just NOT polarised sunglasses. Thanks for the video. Cheers

@Moonfleet41 2 місяці тому

Well i never knew that.. good advice too with the price of them aye! Have a great weekend too buddy ,and thanks for sharing. !

@David40S 2 місяці тому

Have a look at my comment - Decon recognised that the original Decon 90 (around for 50 years or more) has limitations for non-ferrous metals and sensitive coated surfaces. They produced Neutracon, which they claim is for aluminium, zinc, copper, brass, silver etc., soft glass, coated lenses, polymer surfaces and other sensitive surfaces. Not sure I'd risk it on my posh brand new Raybans, but I might try it on an old pair that the dog has chewed, to see if that works safely.

@rickibenka9497 Місяць тому

Interesting video. 👍 I've one the same size as that, which I bought for various projects. What I do is fill the tank with some water (over the minimum level of course) an use separate containers for different fluids I use to clean various items. In your case, you might have an old ice cream tub with water & degreaser and Penny might have a jam jar with her jewellery cleaning fluid or just water and washing up liquid or you might have a glass coffee jar with some other liquid mixture for cleaning up smaller parts. It saves having a large volume of the degreaser mixture sitting around. I suppose if you did just have it sitting there, Penny could still have her items in a small sealed container bobbing around the big tank getting cleaned, as it's the Ultrasonic frequency which is doing the work and it just passes through the fluid with ease. Just a suggestion.

@Moonfleet41 Місяць тому

Thanks mate, great suggestion, a few poeple have said the same thing, and it's a great way to save time and money on different cleaners and constantly washing the tank out.. Really appreciate the time you took to write and let me know.. have great weekend mate. !

@rickibenka9497 Місяць тому

@@Moonfleet41 No worries. Same to you two.

@Goldwing1500rider 2 місяці тому

I noticed you got 9L and by any chance you wished to get a bigger one? Or do you think it's big enough?? Just curious your thoughts. What size are your friends?

@geraldfitzgibbon7428 2 місяці тому

I bought small julery 1 from lidl few weeks ago. Its amasing how clean it gets silver chains and pendants

@JagTigerIV 2 місяці тому

The second reason you should always use the basket it's to avoid burning the ultrasonic element at the bottom of the base by placing parts in direct contact with the base.

@chrischristofis8501 2 місяці тому

They are used routinely for scuba regulator parts, just FYI

@rsbharley4766 2 місяці тому

Hi Penny and Del ,hope all is going well for you both. Nice video mate, I have had one for some years now and one at work. They are a great bit of kit, would be lost without it and I use the glass jar tick as well. But now you have got me thinking I need a bigger one, damn you Del LOL. Hope the weather is starting to get better over there, it's a bit cooler over this side only 32C today. Penny and you have a great relaxing weekend and take care. Cheers

@Moonfleet41 2 місяці тому

Morning mate.. still raining here, and zero an night if the sky clears.. so ill settle for 32c any day, help dry up some of the flood water lol! I can see this getting used a lot from now on, and making life easier for sure. . Take care and have a great weekend mate.. D&Pxx

@LS-uv9gg 2 місяці тому

Absolutely brilliant, your excellent description of it's functionality! I have seen a zillion online videos of people using these things, from Mechanics, to Jewelry peeps, to Watchmakers, etc. Not a *single* one of them has ever even mentioned the Degassing part, let alone explained it. Hats off to you again, as usual!

@Moonfleet41 2 місяці тому

You're very welcome, im glad it helped. I just read through the instructions and it did seemed to stress that Degassing is important. Thank you for your support as always. Have a great weekend and stay safe.. D&Px

@Goldwing1500rider 2 місяці тому

Really kwel machine. I own one, the only purpose clean my wrenches, sockets ( no ratchets) among other tools, and many customers have never seen such cleanest tools and spotless clean drawers. I have been using purple cleaner, let it clean during the lunch hours. I had that machine past 5-6 years. Really can't go wrong owning one in small shops. I sometimes clean carburetors and diesel fuel injectors.

@Moonfleet41 2 місяці тому

Thanks for sharing sir.. i can see it's a popular machine and worthy investment.. im looking forward to cleaner tools for sure. ! Thank you for your support. Have a geat weekend and stay safe.. D&Pxx

@Goldwing1500rider 2 місяці тому

Likewise!! Hey!!! Spring around the corner!!! Soon riding time!!

@colfergusson4242 2 місяці тому

Got a 30L brilliant bit of kit, be very careful with degreasers and type of cleaning solutions with delicate aluminium parts like carburettor parts, as some else mentioned to save even more on cleaning solution, depending on size of parts fill tank with water and use small tub inside with water n cleaning agent. Recommended on the big 30L unit build frame with castors moves around garage with ease

@Moonfleet41 2 місяці тому

Thanks for your input, i can see how dropping in small containers with solution would save a lot of money !

@David40S 2 місяці тому

There are ultrasonic cleaning solutions for sensitive aluminium parts - Neutracon being one.

@enduromotorradtouren 2 місяці тому

I heard so much about them, but never got them shown or explained. Thanks for your video. It will pay off soon for both o you. Have a wonderful weekend, Günter/Nürnberg

@Moonfleet41 2 місяці тому

Thanks for your support as awlays my friend.

@johnk7814 2 місяці тому

Handy machine for sure ,I soaked piston's for 3 days and scrubbed them to get them cleaned.

@johnriley8713 2 місяці тому

The Sportster 883 pistons! Are you done with Sportster videos? I seem to recall a shop-startup video, but not a proper ride-around, like that awesome T120 video which is still one of my favorites!

@Moonfleet41 2 місяці тому

Not by any means John.... the bike sits patiently awaiting the end of monsoon season we seem to currently be under.. then it will indeed be a ride video up to get an MOT, then a ride out just like the T120, and i can't wait.!

@savinggracechurch4112 2 місяці тому

I fitted new plugs to my FJ a couple of months ago in a service. But when I fired it up yesterday, it was as if it was on three cylinders. It was running alright before. Maybe the fuel is starting to oxidise? Yes, another helpful video from Delboys Garage is a good way to save some money. More money for beer or cake 😅

@Moonfleet41 2 місяці тому

I guess if you've used E10 dishwater octane.. it will go a bit stale in a couple of months, specially oin old carbs.. if you can get it running clean on some fresh E5, then maybe give it a good run and clear it all through... and check otur fuel hoses too mate, look what happened to mine after a while in storage.. they are finite, should be reaplced every 4 years or so at least.!

@savinggracechurch4112 2 місяці тому

@Moonfleet41 Yes, dishwater. A bit of a washout. Great advice, Del. I get on with what you said.

@stevehill1826 2 місяці тому

Hi Del, so glad you explained the de gassing, when I saw the 'Degas' label I thought that was something to do with french impressionist art, lol. Nice demo for simples like me to understand easily, appreciated buddy, take care you both x

@Moonfleet41 2 місяці тому

Ha ha, me too, lifted it out of the box and thought...wth does that mean..lol! Have a great weekend too and stay safe.

@Derpderpson123 2 місяці тому

It's THE thing you need for carburators. Used it for my Honda CB-1 carbs which were rancid and after 45min ===> clean

@myz06rocks 2 місяці тому

been considering this for some time. Pretty much just waiting for the first heavy batch of things i need to clean so I put it to work straight away.

@Moonfleet41 2 місяці тому

Good choice. Good luck with it.. have fun..

@BikesofRye 2 місяці тому

Looking into a sonic cleaner after watching this - for what ever reason I had this assumption it was tricky to set up and that put me off. But clearly, it isn't that difficult. Looks to clean up parts really bloody well too. Nice! 😎

@Moonfleet41 2 місяці тому

Sure does mate.. simple and effective.. specially on clogged up fuel parts and hard to reach things.. Hope life is good and you're looking forward to spring.

@tcruz4926 2 місяці тому

Nice video. You missed a Hazzard warning to those who want to clean their dentures, take them out don't put your face in the machine! LOL

@Moonfleet41 2 місяці тому

Thanks for the input sir... you just know someone would consider that... !lol

@1rawdawg007 2 місяці тому

Happy Friday !

@rickrogers2649 2 місяці тому

Old timers like me over here in the States will remember Mr. Wizard who had a TV show on all sorts of cool science topics. Looks like you are the new modern day version of Mr. Wizard. 😁 Always fun to get a new shop tool especially when you and Penny can both use it. Have fun with it. Cheers to you both. ❤👍👍

@Moonfleet41 2 місяці тому

Just checked out Mr Wizard.. i wish they put that kind of TV on today, back in the 70's over here we had Jack Hargreaves with "Out of Town". just an old guy who sat telling you about all the old ways an how to do things simple and easy.. Bring back Jack and Mr Wiz... who needs Google..lol! Have a great weekend and take care always.. D&Pxx

@be4tnl 2 місяці тому

get some zip lock bags mate, it will keep your cleaner clean. just put the parts with water and vinigar in the bag and that in the cleaner. it's also a lot easier to find the small parts once the water is dirty

@Moonfleet41 2 місяці тому

Good idea, thanks for sharing!

@richardwhittle2302 2 місяці тому

Clever piece of Kit, worth the investment Del 👍

@renzovc 2 місяці тому

Awesome video brother!!! Great tutorial, I really need one of those specially when I'm cleaning motorcycle carburetors !!! I think I'll treat my self !!! Thanks for the helpful tips brother !!!! Stay safe guys cheers New York 🎉🎉🎉🎉

@Moonfleet41 2 місяці тому

Sure thing, I think that's the most common use for them in automotive terms, but they have many other uses too! Take care both of you, stay safe there in NYC! D&Px

@loco0351 2 місяці тому

Great video as usual. I was wondering how loud is it. I have used some sonic cleaner where they were just too loud.

@Moonfleet41 2 місяці тому

It's about the same volume as a small fan heater.!

@loco0351 2 місяці тому

@@Moonfleet41 Thank You !

@howder1951 2 місяці тому

Great demo Del. I got a small one of these and never thought of freshening a spark plug. Thanks for the tip and keep on giving more tips as you get jiggly with the cleaner. Peace out!

@Moonfleet41 2 місяці тому

Thanks buddy.. yeah, im now constantly looking round the shop for little things to dump in it for a clean..lol! i guess it will be earning it's living for sure. Have a great wekeend and stay safe too..D&Px

@veeken777 2 місяці тому

Recon i could become a Bordello Outcast Traveling Salesperson. A kind of Tinker. " Choppers Maddam..Clean Yur Choppers.."

@Moonfleet41 2 місяці тому

Ha ha.. i recon ill certainly be cleaning a few parts for freinds now..!

@jerryokeeffe9886 2 місяці тому

Good piece of kit pal,always wondered how it worked, well explained

@Moonfleet41 2 місяці тому

Glad you enjoyed it mate!

@Pete-ou4cq Місяць тому

Hi Del I am thinking of getting one of these but I was wondering could you fit a cylinder head of a Harley Evolution in the one you have?

@Moonfleet41 Місяць тому

I think it'd pretty much fit, someone suggested you can always leave bigger items sticking out, do one side then spin it over and do the other..!

@Pete-ou4cq Місяць тому

that's great thank you.@@Moonfleet41

@customgaragemoto7590 2 місяці тому

👍👍👍👍👍👍👍👌

@jonbecherer5103 13 днів тому

Useful information. Thank you

@Moonfleet41 13 днів тому

You are welcome

@athrunzala5337 10 днів тому

Thank you, that was a very useful experiment. Much appreciated

@Moonfleet41 10 днів тому

Glad it was helpful!

@daveco1270 2 місяці тому

I didn't know about the degassing part. I'm not sure my machine has that button. I'll have to go check and see.

@gerardcullen5131 2 місяці тому

Cheers Del I have seen them on other channels but nothing about the detail of using an ultra sonic cleaner thanks for that

@Moonfleet41 2 місяці тому

No problem 👍 glad it helped.

@garethburningham9467 2 місяці тому

After watching this video it occurred to me they have these in the local chippy. I ran straight round with some heavily soiled XJR parts and pushed past the people waiting and threw them straight in. The woman behind the counter starting shouting at me, couldn't understand her but it sounded hostile!!!! Anyway I'm barred now so no more chips for me 😢

@Moonfleet41 2 місяці тому

No Way..how unhelpful is that !! you'd think they would value their customers needs, be helpful in their customer service, and throw in a bag of scraps and a deep fried Mars bar for good measure.. drop a name and shame them buddy, we won't be using them for uz fish supper again and no mistaking..!

@garethburningham9467 2 місяці тому

We need to stick together 🤣

@piersquarless7731 2 місяці тому

Really enjoying the streetfighter build again my man

@Moonfleet41 2 місяці тому

Hi Piers, glad to hear from you, and thank you so much as always for your kind and loyal support.. have a great weekend and take care. D&Px

@sennubalan3733 2 місяці тому

Good info

@fengbi5653 2 місяці тому

Hi Del a great bit of kit . I was wondering can you clean your bike chain in it or will it destroy the O rings .?

@Moonfleet41 2 місяці тому

I think like with bearings, it would damage the hardened steel pins, and also there are plenty of effective ways to clean a chain already..!

@AnchorsAweighNarooma 2 місяці тому

Good review and points covered, cost in Australia is cheap at $200 to $800 AUD mmmm thank you

@jameswilliams4775 2 місяці тому

Nice video. Solved a few curious bits I've often wondered about these cleaners.

@Moonfleet41 2 місяці тому

Glad I could help!

@kilobravo6272 16 днів тому

Hmm. Might have found away of doing my mosy hated of bike jobs- cleaning the calipers for a rebuild.

@SaccoBelmonte 2 місяці тому

Oooh yeah, I don't think your hand joints, blood cells and pretty much anything would like cavitation at all.

@allanmason7544 2 місяці тому

great tool del

@hunterjg777 2 місяці тому

Does having that kind of dirty pistons result in oil burning, do you know

@Moonfleet41 2 місяці тому

NO, not directly, it indicates a rich mixture for a long time, insufficient burning of fuel... but the rings and bores are more then healthy with cross hatching still clearly visible..bike had only done a genuine 14k miles, so this would have burned little or no oil at all.!

@geoffozevans4500 2 місяці тому

Impressive results Del, a worthy addition to the workshop, all the best both 👍👍👍

@Moonfleet41 2 місяці тому

Thanks mate 👍, really appreciate your constant, loyal support! Have a great weekend, D&Px

@FerroH1338 2 місяці тому

Nice machine, I'm also thinking about buying one... 👍

@rickseconds7676 2 місяці тому

I use mine for pistol cleaning.

@rolandjones8323 2 місяці тому

Would it do more then what you did like other parts of a motorbike ? Thanks

@Moonfleet41 2 місяці тому

Like i said at the end.. practically anything.. specially carbs and injectors..!

@ballerblocks 2 місяці тому

There aren't any links to the products....?

@Moonfleet41 2 місяці тому

So what are the first four links in the description under the video then?!!!

@cerealtiller 2 місяці тому

Where are the Links?

@Moonfleet41 2 місяці тому

Directly below the video on the description ! click on "More..."

@tonygriffiths2485 2 місяці тому

I know you are not deliberately promoting a piece of equip,emt, but I bet Sealey are delighted with you as I am. Lovely and informative video, blog whatever. No change there then friend :)

@Moonfleet41 2 місяці тому

Thanks Tony, you're right, it wasn't aimed at being a promotion, but if it works it works..and the results can't be denied aye !! Have a great weekend and stay safe sir.. D&Pxx

@philmorrow2446 2 місяці тому

And it also doubles up as a deep fat fryer!!!🤣

@Moonfleet41 2 місяці тому

Hmm. Curry sauce Sir?

@kwiebje24 2 місяці тому

Cool machine! Could you also bake fries in it 😉😉?

@Moonfleet41 2 місяці тому

Great idea!

@ericnorthup6464 2 місяці тому

I use my ultrasonic cleaner all the time on carbs and firearms parts and whole glocks after they get dirty enough lol

@Busaboy1300 2 місяці тому

One of the best things I've ever bought..worth every penny.

@colinm1325 Місяць тому

😂 If you've got a garage habit.....😂

@ObsessiveCarDetailer 2 місяці тому

Great tool for the workshop & really interesting video👍. My w/end can now start

@Moonfleet41 2 місяці тому

Great to hear that mate.. take care and enjoy the weekend.

@tinks43 2 місяці тому

Very impressive, definitely worth the doubling up! Can I have mayo with my fries please 🤣

@Moonfleet41 2 місяці тому

Yes you can, but there's curry sauce if you prefer.lol!

@loddude5706 2 місяці тому

'Enginerding' - what percentage difference between 'time spent removing crud' & 'time spent spraying/baking/riding it all back on'? One day I'll advance myself, all the way to stupid, learn to accept colours DO have a merit beyond their somewhat flakey attempts at corrosion proofing & maybe even get myself into Art College. Until then tho' - "Crud is cool, it has depth." : )xx

@thomasedward9065 2 місяці тому

I read this comnent and it made no sence or maybe it's just me ?

@loddude5706 2 місяці тому

@@thomasedward9065 If I ever make any sense, there's little hope for the rest of you : )

@pauldavis8421 2 місяці тому

That is one extremely useful bit of kit Del ! I think it is a worthwhile investment ! Thank you for the video as i have wondered , are they any good ? now i know ! Have a good weekend mate 👍

@Moonfleet41 2 місяці тому

Sure thing Paul, Glad it was helpful mate. Enjoy your weekend too aye !

@russellsilverson552 2 місяці тому

I enjoy learning from your experience in motorcycle mechanics and maintaining bikes. Proverbs 1:5 A wise man will hear, and will increase learning; and a man of understanding shall attain unto wise counsels: King Solomon