Переглядів 221,111
Start playing LOST ARK with presents:
bit.ly/3oY6Rdf
Breastplate forging. The breastplate is the front of the cuirass that was used by itself, without back protection. I show the forging of the breastplate made of 3mm steel grade 30hgsa. Then hardening and crash test with a sharpened ax.
Support channel to improve the content
PATREON / armorysmith
0:00 Sketch and patterns
1:35 Cutting the steel. 3mm, 30hgsa
2:00 Shaping the top of thebreastplate
3:00 Cutting the bottom
3:30 Shaping the bottom of the breastplate
3:54 Bending the edge with special strikers
4:17 Shaping with a hand tool
4:35 Video sponsor. Lost Ark supports the channel - thanks to them!
5:57 Shaping with a hand tool
6:20 Correction with steel heating
7:05 Bending the "skirt" hot
7:57 Fit parts to each other. Elimination of gaps
8:40 Straightening
9:22 Bend the edge of the bib at the throat and under the arms
10:20 Vertical rib at throat and underside
11:22 Holes and preparation for hardening
12:00 Quenching and tempering
12:34 Dismantling the frame for hardening. Edging
13:00 Polishing
13:44 Preparing the breastplate straps
15:20 Assembly
16:30 Crash test. Flanges mace, poleax, halberd and ax