I'm a computer engineer who has spent my entire life developing cutting-edge digital technologies in a world where the mechanical side didn't appeal to me much. However, I've recently taken on the challenge of restoring two pocket watches that have been in my family for almost 200 years. So, I decided to learn about restoration processes myself, and as a result, I've become passionate about horology. Currently, I repair and restore antique watches with complex gears, and I do this out of passion, where I've learned to connect with the old values ​​of manual mechanics and machining systems. I must admit I'm very impressed with your videos and would like to thank you for sharing your work, which inspires me to learn more and enrich my knowledge. I wish you success!

@4:59 You say "I'm lazy..." After watching you create watch parts from scratch, I don't think anyone believes you are lazy. Very nice video. Thanks.

As a 75 year old long retired toolmaker, I always saw watch/clock making as a dark art form! I still do! Great to watch the process though! Fine engineering at its best! I did actually use a scaleable engraver to make miniature hand assembling tools for the Plessey 9ta Sonotone audio cartridge, which was trying enough, but this is just sublime! Cheers

my grandfather was a watchmaker in Montreal. He came over from Denmark years earlier to start a new life here. I used to go to his shop in the 70's as a child and just be amazed at all the machining and fine work he did. He worked on large clocks (like the town clock) all the way down to small watches. I remember him hunched over his lathe with a brass billet in it. Not sure what he was up to but it required his full concentration, and some serious talking to himself in Danish. Being a little kid I always loved it when all the clocks went off at the hour at the same time. It was always a hoot. Its really nice to see your work here. He would have been keen to watch.

I'm a seasoned software engineer and do a lot of CNC and hardware engineering. I was humbled by the ingenuity and engineering displayed here, just incredible.

I'm 62 and wish I could go back 40 years and know that this was a way to earn a living. Watch making wasn't even something I knew existed back then. I tinker with watch restorations but this is light years ahead of anything I'm capable of.

I have an office job and have never learned to use a lathe, and I cannot keep my eyes away from your videos... they give me satisfaction from deep inside my heart. I am seriously considering going into this matter in my sparetime (modeling being my hobby), I am just not sure how 60+ eyes can keep up. For the fascinating experience, thank you a lot!

Incredible skill and precision, brilliant close up photography and video production.

This is absolutely outstanding content, I’m so thankful I found this channel as a hobby watchmaker it’s just amazing

This was a masterclass in every way, truly magnificent videography, lighting and editing, and with superb presentation and narration. Likewise, the narration was perfectly timed to the video content being displayed. As a viewer unfamiliar with watchmaking I really appreciated the Watchmaker explaining the process. I cannot imagine a more difficult engineering challenge than to make everything to such tight tolerances in miniature! The Watchmaker displayed meticulously precise attention to detail and very high levels of craftsmanship were evident in the component he made. I am delighted to have found your channel and to have subscribed.

You just put together so many of the things I've learned and loved in a completely different way... Machining and Designing with a bit of hobbyist maker mixed in that gives me tons of inspiration and ideas... if only i had the space. I absolutely want to get a watchmakers lathe like that in the future for small projects.

What a class! Probably on of the best 15-minute lessons I've ever watched. Thank you!

It's very satisfying to see someone do something very difficult, or challenging, and do it well. I especially like the creative ways of holding tiny things. Without proper tools, I made a device to put hands back on a watch I never wear anymore. It's nice to know it works.

Stunning! Thanks for all the effort in making this video.

Delicate work, making watch gears. Impressive level of patience! Great content!

Really like how you care for and protect your machine.... And a really nice job. Thanks for taking the time to make the video and share it.

I am a journeyman woodworker who enjoys working with hand tools as much as possible. I make mostly small pieces and lots of precise joinery. The way you work with metal to such degree of precision is astounding to me and something I'll never be able to reach, but I just love wood too much. Nevertheless, your videos are very satisfying and calming. Cheers.

I'm endlessly fascinated by watchmaking, have been since I was a child. The precision displayed is simply breathtaking.

Fascinating! Makes you wonder how they did it hundreds of years ago!! Definitely a set of skills I wish I had!

This video was amazing, I hope you keep producing quality content like this so you can grow to be huge!

Boss: "So yeah it's your weekend off but we need like 50 of these by tuesday so... "

unbelievable art and craftmanship, big respect....

Such a brilliant video! The work, the photography and the audio are all spot on. A really interesting demonstration of a great way of doing this. Subscribed!

Outstanding work. Truly a masterpiece of a part.

Inspirational. Beautiful work, beautifully filmed and narrated. Thank you 👏👏👍😀

nice to see how much effort goes into making small gear

Thanks for sharing your work with us. Greatly appreciated!

Fascinating! Excellent videography and narration. I am really enjoying your videos. Thanks for sharing

I really like the idea of indexing a lathe spindle, in conjunction with a cross slide mounted milling spindle. After using a big Harrison (the spindle nose is about 10 inch diameter, spindle bore about 4 inch, and a lovely lathe to use) it's fun to watch a smaller lathe is use.

This is wonderful work. Terrific accessories for and upgrades to your lathe!

When I left school in the late '50s I did a 5 year apprenticeship here in New Zealand. My tutor often worked manually making wheels, etc. He was an amazing craftsman, not so much myself. I left the trade in the mid '70s to go into Christian Ministry. Now that I'm retired I spend quite a bit of time watching UKposts content, often watchmakers. Love them, bringing back great memories. Thanks so much for your contribution.

Brilliant skill and knowledge of your equipment.

Its amazing what you can do with a small watchmakers lathe. Your craftsmanship and attention to detail is amazing, and I adore the can-do attitude. Very inspiring. Thank you very much for producing this video.

Thank you for sharing your passion and expertise. Your machine tool and appliances are worthy art in their own right.

Fascinating to watch! I work on CNC machines where we routinely use boring bars that are a meter long and 50mm in diameter so its cool to watch machining on such a tiny scale. Great video!

one of my favorite subs, excellent workmanship thanks

What a beautiful tool is that Pultra Lathe! And good to see your work with it, including the ingenious custom dividing head. Thanks for posting, very inspiring!

Exceptional. Thank you.

That rotary table you adapted is super slick! I love that kind of thinking

Yore channel is so good, thanks for uploading a longer one.

The amount of time and equity that goes into making this tiny part is frankly incredible. And, that doesn't even take into account the time and equity put into the making the tools used to make the piece in the first place!! Mind blown! Cheers T

Exquisite to watch. Horology is something that really interests me. My day job is manufacturing and repairing components for vintage and classic motorcycles but this is a while several levels beyond anything I've ever thought about let alone tried. Thanks for posting.

A very well explained video. Fantastic end result! Fascinating !

Absolutely fascinating how these miniature parts can be machined so incredibly precise.

Beatific, dedicated, and methodical work.

My dad was a master watchmaker. I used to watch him do this kind of stuff all the time he passed away in 1997 if he was still around today I’d be 102 years old fascinating stuff.

Just found you and enjoying the narration and video content Its awesome to see the old and new ways of doing things come together thankyou very much for sharing

Finally I found someone that can show how to make small watch gears, thank you

I cant imagine the tallent the first watchmakers had coming up with the ideas drawing up plans making calculations making the precision tools all by hand.....fascinating and inspiring

Man I am going down an amazing rabbit hole of videos about watches and watch making!

So good, a Masterpiece 😊

That was awesome Thankyou 🎉❤

I have been in tool and mold long enough to often feel quite jaded. Vids like this remind me of the things about the trade that still bring me happiness .

The cork use was brilliant. Good innovation across the board.

You had me at "Hello" but when you threw in the scanning electron microscope.....that was over the top.

You are a man of perfection. Your setup wouldn't be cheap.

There's a unique sense of achievement in manufacturing something oneself. Beautifully presented!

I have rarely seen a machining video this relaxing

Beautiful!

I appreciate you making a point of naming the tools used thank u

Excellent fiming, worthy of an award in itself, and thank you for the combination of great narration and filmwork. You mention George Daniels, whom I knew in the Isle of Man, he was an occasional diner at the Riverside Studio, and restaurant in Laxey, where the host a Swiss named Peter Ellenberger, ran live jazz music with excellent cuisine. George was there one evening when I was playing contrabass in a jazz trio, and he asked if the trio might be free to play at his house on his fiftieth birthday, which was duly arranged. The trio played the first set, and George served up some drinks whilst we took a little break. He grabbed me by the arm, and asked me to follow him in to his garage / workshop. To my amazement, he opened the door to THE one and only Barnato Bentley, the actual Le Mans winner from the nineteen twenties. Afte my surprise and some further discussion, he showed me his watchmaking workshop, and held out a porcelain dish, about three inches diameter, passed me a jewellers magnifying eyepiece, and invited me to inspect the product of his past weeks work laying in the bottom of the dish. I put the glass into place in my eye , and looked into the dish, which had a bout five or six gearwheels laying in the bottom. The wheels were perfect in every way, they were made of a steel of some sort, and were less that a millimetre in diameter, with I guess around ten or fifteen teeth per wheel. I was staggered to see his lathe and workshop layout which was tiny, and remarked on a partly assembeled escapement mechanism. Hel told me about his Patent, and the problems with some of the established manufacturers not giving any value to ihis invention, and also of the sorry tale of a lost watch that the courier was not fully insured to compensate for. All in all, the eveming flew by, and the music was just what the party needed. A strange power cut happened at one point, which disabled the electric piano, but the power came on about five minutes later, to great applause from his guests who wer lighting candles in order to see the food and drinks on the table. An evening never to be forgotten, and I occasionally bumped into George Daniels at Peter Ellenbergers restaurant thereafter, he drove a dark blue Bentley saloon as his everyday runaround, and was fond of Swiss wines which he picked up from the restaurant from time to time. Never to be forgotten, George was a lovely gentleman. Keep up the great work, I shall subscribe to your channel right now.

I just stumbled onto your channel... I am gobsmacked! I have never this done. Outstanding video! Thank you so much for the work it takes to produce such a quality video! Best!

Great close-ups and individual details!

This is fascinating stuff.

So much work for such a little piece 😱 You have my deepest respect!

I’m Here for the day you have a million subscribers, because it’ll happen. You’re next next level attention to detail regarding precision engineering.

Always amazed at what these tiny lathes can accomplish. Great channel. Subscribed.

I always wondered how those wheels were made to such exacting measurements. Totally awesome!!!

Impressive stuff. Been enjoying watching you making these small parts.

This is awesome, thank you for showing :)

This ultra configurable lathe and your modifications are amazing. It could fit in barbies dream house (if you paint it pink), but the work you do with is absoluteley respectable.

Really enjoyed watching this channel’s content. It’s about time !

Bro u saved me. I have a presentation about how every part of watch created and the only video I found was urs. really thank you❤❤❤❤❤

what a lovely setup!

Mate, you're a genius.

Again an excellent video - also I see the channel is growing 🎉, I couldn’t believe how few subs you had the first time I saw one of your videos. happy to see that I’m not alone

This is timely, as the watchmaker who's putting my badly abused Navitimer back together is having to manufacture several parts, probably using procedures like these. Cool stuff working at such a small scale.

Hi Chronova, I'm very amused by all the DIY machines used in gear cutting. Would it be possible to feature the making of machines at a particular job such as gear pitching or otherwise. This would be great for hobby home machine builders like us. Thank you!

Unbelievable in the detail and creativity. Thank you!

sick.... thats all I can say, what a craftsmanship!

There's not much one can add to the previous commenters. I found the video amazing, educational so liked and subscribed. And of course, thank you for sharing your time and talent.

Absolute work of Engeneering art, amazing work

This is art

so much work and so many opportunities to screw it up even at the very end. Much respect to you

thank you ! amazing work

You are a genius! I absolutely love the lathe

You are a mad scientist, sir. I have seen indexing machine specifically for this purpose. Kudos to you for finding another way. So what was that electronic setup originally designed for?

Never felt like such a nerd but the precision this guy works to is immense. Reminded me of my college and early work years as a machinist, if this bloke trained me I might of stayed as an engineer

11:26 the most angelic sounding drill ive ever heard.

This is just outstanding master craft! Just imagine making these pieces of arts in the the 1700s with not this technology! Surreal!!!

Skills way beyond my pay grade - a pleasure to watch.

Wonderfully clever solutions. Cheers.

Retired Professional Engineer in Santa, Fe New Mexico and new subscriber.....marvelous work you are doing, elegant videos. I discovered your channel from an Adam Savage shout out in a video where he was setting up his watchmakers lathe.

Thank you very much for the insight; I have some comparatively enormous mod 0.6 gears to make and I am now better prepared to do so.

Extra equipment and great video Cool thing!

Brilliant and fascinating! Thanks.

Impressive. Thanks for sharing.

It isn’t often that I subscribe after watching one video. But that was very interesting and I loved the minute detail.

Beautiful, very precise. 👍👍👍

Very inspiring and educational. I am building a planetarium projector. More of a large clock than a watch, but the techniques for producing precision components cross over. I'd like to try building a table top orrery one day. I think that will be a true test of my patience and attention. Making a watch is at a level of precision I could never achieve.