Ha!

wise habibi words

This is a top tier comment

🤝

How does one get a water jet as an enemy?

Zoinks 😳

How did you even manage to make that mistake???

@@John-Doe-Yo industrial cleaning, jetting floors and machinery. And young and stupid at the time :D

@@cornovii3012 oh yikes

@@WaterjetChannel If you get this message could you run this for me and see how bad it would have been for me if i missed my steel toe cap, would the leather have saved me much. I was wearing the beige one piece steel toe cap Rigure boots with the 2 loops at the top fur lined. I was running a 6 cylinder diesel pump on a dump gun with a pencil jet at 12,000 psi. I hope you do get this :)

Injection injury. Looks harmless, but do nothing and die

Hey thanks for that, I learned something new today

We used all the saws in middle school, but we had to get a hundred on the test for it

@@zenaxia8063 We were using metal lathes from the 50's and I had a lot of respect for those machines, that's for sure.

Safety first

Here’s something that can change your way of life or thinking. This is the most important thing you will hear/read today. If you’ve told one lie, stolen anything, or lusted (which is adultery of the heart), you’ll be found guilty on Judgment Day and end up in Hell. But there’s good news: Though we broke God’s Law, Jesus, the prophesied Messiah, perfectly kept the Law, fulfilling all righteousness. He paid the fine for sinners ( that we could never pay ) by suffering and dying on the cross-absorbing the wrath of God that we deserve. “For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.” Then Jesus rose from the dead and was seen by hundreds of eyewitnesses. Today, repent and trust Jesus; God will grant you forgiveness and the gift of eternal life. God bless

@@zenaxia8063 Here’s something that can change your way of life or thinking. This is the most important thing you will hear/read today. If you’ve told one lie, stolen anything, or lusted (which is adultery of the heart), you’ll be found guilty on Judgment Day and end up in Hell. But there’s good news: Though we broke God’s Law, Jesus, the prophesied Messiah, perfectly kept the Law, fulfilling all righteousness. He paid the fine for sinners ( that we could never pay ) by suffering and dying on the cross-absorbing the wrath of God that we deserve. “For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.” Then Jesus rose from the dead and was seen by hundreds of eyewitnesses. Today, repent and trust Jesus; God will grant you forgiveness and the gift of eternal life. God bless God bless ❤❤

Holy shit

Damn, it cut off his fingers with so much power he didnt feel it. Man I never knew waterjets could be so dangerous. I guess you learn something new every day.

@@erykaldo2l270 Yeah if you sever the nerve cleanly you don't feel it. I got a very nasty injury (unrelated to work tools) and it cut so cleanly to the bone I never felt a single thing even though my hand was pouring out blood.

Why would you try to clean anything labeled “rotary” while it’s running?

@Oni If the finger came completely off? I mean, people have successfully gotten extremities reattached after even violent amputations where there wasn't a clean break. It just depends on several factors.

x2

​x3

×4

x5

x6

not if i have anything to say, i would beat it's ass

"This machine doesn't know the difference between flesh and metal, nor does it care"

For sure

@@ProtoV33MK1 The Machine can't know nor care. It's not a sentient being.

@@BangMaster96 that's literally the point

Singular finger?

@Hrushikesh Naik yes. I first caught the stream with my wrist. This was all under the water. When I felt it on my wrist, I yanked away and caught my middle finger on the stream. That's where my injury occurred. I only have a slight scar on my wrist, thank God.

​@@brendonkline596 did you lose your middle finger? 🖕

​@@HrushikeshNaik1650763n73 Yikes!

Is the holding your hand still idea good or should you rip it outta there

I guess it is weird to think about, but that’s how it cuts. Pressure + friction.

I don’t think the water gripped it. I would say the metal bracket the hand was attached to got caught on the hole in the wood

Really think it was more the downward pressure against the wood "table" they had going there

Final Destination

you’re forgetting about the abrasives

I've cut my own finger to the bone with an angle grinder and was barely fazed, yet this is gagging me...

Why’d they have to make it look so real?! 🤮

@@nickflesher7608 So people take safety seriously, clear ballistics gel doesn't give you the shock factor realistic ones do.

Fr i kept going "ohhh" and "yuck" lmao

That table saw! 😳😬

damn, thats deep tho

Bless you man

what is a water jet for? cutting stone??

@@Ch4rlz_ThA_Princ3 cutting just about anything you want. Stone, glass, metals, plastics

​@@1986krazy you forgot to list thumbs👍

​@@chriscooper1449 💀

I was like "I'm slightly intrigued, but this is a long video so I'll just open it up, skip to the 15 seconds where it happens, watch that and then move on." Only to realize that the whole video was you guys doing the thing. Well done.

no "stick around to the end to find out what happens" BS.

Here’s something that can change your way of life or thinking. This is the most important thing you will hear/read today. If you’ve told one lie, stolen anything, or lusted (which is adultery of the heart), you’ll be found guilty on Judgment Day and end up in Hell. But there’s good news: Though we broke God’s Law, Jesus, the prophesied Messiah, perfectly kept the Law, fulfilling all righteousness. He paid the fine for sinners ( that we could never pay ) by suffering and dying on the cross-absorbing the wrath of God that we deserve. “For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.” Then Jesus rose from the dead and was seen by hundreds of eyewitnesses. Today, repent and trust Jesus; God will grant you forgiveness and the gift of eternal life. God bless ❤❤😊!!!

​@@jrmartinez1354judgement day? Oh hell yeah terminators come on me

​@@jrmartinez1354Man I haven't done any bad thing but I'd rather go to hell than have people in heaven preach this shmuck to me all day 😂

😮😮😮......How....just how! That is unbelievable! But yes, she is fortunate

i also have had not a single experience with a water jet in my entire life but im glad we are now prepared

We must be soulmates, there is almost zero chances ill ever see a waterjet, i work in a hospital, but my curiosity got my in trouble and hurt a lot of times lol

i’m scared just in case i do even though i know i won’t

The UKposts algorithm has brought us together

Thank for giving the absolutely delightful mental image of a man going for a walk in the woods when suddenly, he freezes and falls into a defensive stance, looking toward something behind the camera, clearly on high alert. The camera turns to reveal…a waterjet. Sitting there. Ominously.

Had a coworker take 20k to the arm and while that exactly didn't happen there was so much water under his skin the paramedics thought his arm was broken. He had to wear a type of pump on his arm too for a couple months if I remember right to help extract water from his arm. It was pretty gross to say the least.

You'd have to go into a decompression chamber, it's treated as a gunshot wound!!

And you'll become iron man

Sounds like a plausibly fucked up way to go. I'll try to avoid it

@@jordanstatler4661 Injection injury?

Dramatic is an understatement. I had constipation before watching this video but thankfully the video cured that quite well.

nice choice of emoji you got going there xD very fitting for the video

bro a movie critic, bro writing a college paper, bro is a philosopher (u right tho no shade)

@@stubbs7861 everything but the college thing - high school dropout, this one. 🙃

this video is compositionally a wreck. drags its feet with a ton of buildup. 1 minute video turned into 10. horrible

These machines are way too dangerous …

i barely know water jets i only know pool ones and hottub ones

Not me who just had my arm crushed in a punch and plasma cutter machine😂

@@huntersutter8207 jesus

@@treystephens6166 Yea. No surprise there. Still necessary for work, though

I read that as "20 years as a masochist" ..and I was like, oh no where is he gonna go with this??? 😂

@@kinotsu3017 lol

​@@kinotsu3017 same.

😧

Damn

🤢🤢🤢🤢🤢

that's why you aim it at the ground instead of rubbing the nozzle... yeesh

@@BigHatLoganGaming Sorry for the comparison, but it’s understood by most: best to treat tools like a handgun… never point it at anything that you’re not intending to blast. 40 years with machinists, apprentices, and operators is not for the faint of heart ⚡️ I’ve seen assemblers hold a workpiece between their legs and use a flat blade screwdriver aimed directly at groin …. One slip and it’d be horrible. People thought I was an alarmist when I comforted them for their own safety. A few were offended that I was being ridiculously fearful. I didn’t care… I forced them to change for just that moment.

Same I started to skip through to find the part where they actually tested it but they got right to the point.

Jesus Christ loves you all please repent and forgive

@@littlesam6280 why is this here

The water got into the meat of it super quick too 💀

@@bandit3019 literally had this comment in my mind as soon as I read the og comment 😂😂

Saw trap

💀

I mean, you can just leave it there until someone turns it off. Unless someone is playing a really sick jigsaw level kind of shit with you lol

The idea of literally anyone and anything holding my hand is comforting

@@UwOtt bruh I would hold your hand

Hydraulic pressure trauma, cringe, that’s the big oof.

Fuck, didn't even think about that... sounds like a whole hand amputation due to widespread necrosis

I was surprised they didn't talk about this, especially since a lot have an abrasive mixed in. A company I used to work at had one and a guy told me that a guy had to get have most of his arm amputated because the abrasive just tore everything up inside from his finger (where it actually made contact) to his bicep. Scared the shit out of me and I learned never to mess around with them.

Christ almighty the idea of having fucking garnet abrasive inside your blood vessels is horrific. Is a mineral embolism even a thing that can happen?

@@thatswhatsgood24 What the hell from a simple touch with his finger it instantly shot the pressure all the way up to his bicep!? That's absolutely insane, I wasn't too scared before, whatever, pretty bad hand trauma, but as long as your bones are relatively in tact you're fine. But I never even considered pressure blasting up your entire arm and destroying all the delicate stuff inside, Jesus

Hydraulic injection injury. Nasty stuff

When there’s that much water going onto and subsequently into your hand, the water has to go somewhere. So it floods your blood vessels as well as carves channels through your flesh.

It's called a cavitation wound.

My middle school shop teacher loved to scare us with stories of air compressor accidents. Slicing the arms skin up and down to drain the oil.

Pushing air from a syringe into a specific artery/vein (i forgot which one it was) can and will cause a heart attack 😀

👍

Definitely

You and me both man

@@AGMertzy You him and me both man

@@bilalbaig8586 you, him, the other guy, and me bro

@@toastyapplezzz3613 you, him, the other two fellas, and me bro

You, him, the other three dude and me both mate

Yeah that does sound pretty great experience

God, that sounds awful. How long did it take to recover from that??

@@isaac10231 You don't

@@n3gi_ of course u don't recover what do you think humans are ? We're not mutants with a healing factor

@@clipclopcock true, he is still bleeding from the wound to this day

Hydraulic fluid the worst. It’ll lead to amputations. Horrific

I think most manufacturing companies are now lowering operating pressures on all hydraulic equipment to below 3,000psi for this reason. In the event a hose is damaged, the pressure is lower AND there's substantially less fluid that'll escape as the pressure drops. ...regardless, some hydraulic fluids can permeate your skin even when it's not under pressure and can cause all kinds of health problems. It's much more dangerous than most people would think.

What they use as hydraulic fluid one chemical.

Heard a story where the hydraulic part of the forklift got stuck in the “up” position with a pod like generator on the forklift , kid (early 20s) went under it to loosen it up (think he removed one of the hydraulic wires) and the generator fell and squashed the poor guy

Are you from germany? Did this happen there?

In actuality it would be much worse because of injection injury and all of the granite that would end up under your skin

I mean it cuts metal, of course it’s gonna destroy a human hand

@@thor5446 I thought there'd be something similar to leidenfrost effect but nope there's no mitigating metal cutting water

what a low-effort generic comment. idiot who pretends he didn't know a metal saw/hydraulic press would destroy a human hand.

Yeah them pressure injuries are nasty.

That sucks man.

Injection injury?

@@bensoncheung2801 Its where the fluid or air gets pushed so hard into your hand/arm/leg that it must find a way to go, opening up pockets all throughout tissue around the area hit with high pressure. Like a balloon in your muscles but explosive power, air or fluid can go from your hand injury all the way up your arms inside the skin with that much pressure.

Yup!!!! Air will do it to !!!

No, whats more terrifying is the injection injuries that would come after.

I guess water takes the path of least resistance. In this case it's right through all your soft tissues.

@@mesk412 perfect assumption

I used to crate FLOW waterjets in Kent Washington

​@@JJAB91 wtf is an injection injury?

Pressure pre square inch divided by distance?

Not too far probably. It has to not cut into the table below

im guessing that is the point of the water table, since all those micro-collisions with an incompressible material would slow it down enough@@Gigachad-mc5qz

I work with a guy who worked for the electric utility for 30 years. The guys who worked the power plants were taugh to walk with a broom held out during high output situations to detect steam leaks. This because of two guys who were cut clean in half because of said leaks. One of the plants he worked in actually cordoned off parts of the plant during very high demand unless there was a failure that had to be fixed immediately.

jesus

@@Recreationaltrespasser I've heard something similar on submarines, that they use a broom stick to check for high pressure leaks. The reasoning is it's better to cut the stick in half, rather than your fingers.

When I was in a railroad camp operating a steam engine, the stories of much higher-pressure steam going wrong were terrifying. It is not something to be messed with!

@@Recreationaltrespasser my dad was a nuclear engineer in the navy and he was taught something similar

Ya, degloving is absolutely horrific. I accidentally came across some pictures of degloving injuries and it’s not something I’ll ever forget the sight of. I definitely do not recommend looking them up if you have a weak stomach. It can happen with any high pressure fluid, whether it’s air, water, oil, or anything else. Absolutely horrifying stuff.

Could you elaborate? I got really invested!

@@CrippledMerc those were the worst seconds of my life after searching degloving

@@Zorathefox I warned you

​@@Zorathefox i really want to search it but I also really don't

same

Y'all must be young and or never worked in some sketchy factory lol

@@TheRobotGorilla worked in retail exclusively for the past 10 years. not a lot of water jets around

@@TheRobotGorilla That’s not a normal thing

@@corvus8638 I wouldn’t believe you’re a normal thing either

Was the nap Good?

Dude you’re gonna end up permanently napping if you keep that up

Wait there was recently news of people died in trash compactor recently, as their body got compacted

@@raifikarj6698 coincidence? I think not.

Water jet might be the easiest to hurt yourself on, but it's still not as scary as a lathe.

@@kylewarfel9270 Agree. After hearing a lot of stories from my teachers and also after I saw the infamous Russian lathe accident. I keep my distance from those machines. 1 bad move and you are in pieces.

Lathe is my favorite machine to run. You just have to treat it with an immense amount of respect. As an amputee myself I can assure you, the greatest safety device is the one between your ears.

no

Godamn your right

0:50 actually

@@grimmisascorchmain9486 0:57 actually

​@@grimmisascorchmain9486 🤓

Still doesn't mean we can be anywhere near the sun tho 😂

@@KringleKruncherton Right, because we can't pass by that close to the sun as fast as we can pass our hand in front of the torch. Plus the torch isn't putting out lethal amounts of radiation like the sun.

its not that unlike the old video of the guy slapping a stream of molten metal. the sweat from the heat and the speed leaves him basically unharmed. maybe a little warmer than comfort though

@@PoePoePoed I'm pretty sure you still can't go to the sun even if you are sweaty from the heat lol.

@@KringleKruncherton Damn.

It's good because this just get straight to point, but IDK why its bores me

The algorithm will reward them for it

Yep 👍

@@user-sk3nf2vv4p maybe try watching some other type of content then?

agreed, saves us sliding past all the bro-fun

That's an idea.

Yep, came here to say the exact same thing

Saw Stop does not work on capacitance. It is triggered by resistance to ground (like a ground fault interrupter in your houses fuse box) . And that is the issue. Even if the balistic gel would have a resistance in the area of human body, it would require a contact wo ground. So if you would have added a wire to ground the hand (or to saw into it while laying on the saw table and havin contact to the surface, the saw stop might have been triggered.

@@thorsten_w Uhhh do you have a source for that? Because some quick research tells me ground doesn't matter - nor should it, the most obvious reason among many being that insulating shoes exist and are almost always worn in a shop.

Sticking a capacitor on an electrically ungrounded conductive object does not change its capacitance any more than sticking a jelly bean on it would. All it needs is more surface area. The geometry of the surface matters, but I doubt that anybody cares about details anyway.

Great minds think alike

I would love to see this, especially for a few reasons. 1. To see how effective it would protect you 2. To teach people to use protective gear ALL the time when working with dangerous tools and machines.

as someone who grew up on a farm : protective gear is important, even in the most mundane of tasks. i wouldn’t even want to hoe tobacco without a set of sturdy gloves, let alone handle any machinery.

You mean you’d wear bullet proof vest when you use water jet ? Lmao

Watch it obliterate all protective gear and now water jets are the ultimate weapon. War Crimes initiated.

@@pinkcheng8188 What if the water, hypothetically, jet ricocheted while, somehow, keeping 99% of its initial velocity, turning its new trajectory, conveniently, on a pathway straight towards, for no apparent reason of course, your heart? I surely would want to be wearing some fort of torso protection then. edit: 'fort' should be form but quite frankly, wearing a fortress around your person is likely very effective.

Yep - it worked on the touch screen because they were holding the hand, allowing the current to go through the g. For the saw stop to work they’d have to also be holding it or maybe attach it to a ground wire that they held. That’s why in the hot dog tests they are always touching the hot dog

It works by measuring for a capacitance change every 6ms if the object it touches isn't large enough, or conductive enough, it won't trigger. Suspect the hand is not human conductivity or capacitance.

That's what I thought, the ballistics gel wasn't grounded so the electric charge has no reason to transfer to the gel hand. So there was no change on voltage, and no reason to trigger the sawstop.

@@SpaceCircIes Saw stop works on capacitance, not grounding. It uses low voltage 167Hz AC to detect changes in capacitance. If the gel didn't have enough conductivity or capacitance, it wouldn't trigger it. Hence nails don't trigger a saw stop and hence green wood that's touching the table that is grounded doesn't trigger it.

@@markp8295 I have limited knowledge on that subject. thank you for explaining it. just to try and understand, the sawstop works because the human body can accept the charge and store it like a capacitor?

I cringed with nearly every one, especially when they were drilling holes with the water jet. Horrific stuff.

Me too. I literally felt that. That synthetic hand tricked my brain and I felt the poor souls plight. I physically cringed and turned away.

Same I was holding my hand as it happened lol

I'm sitting here fuckin squirmin

Got them Hodgetwins fingers.

Pain

E

Best way to get a clean ear piercing 😂

@@Druggy-Doggo or blow your ear off xD

ONG

REAL SHIT

Technically correct, but by that metric, lasers are just light and proton beams are just hydrogen.

Yes, the treatment is to essentially flay the limb and clean out stuff.

its kind of bad but have you seen a picture of someone who got squished by a truck

@@Shrek_Has_Covid19 that's irrelevant because this conversation isn't about comparing gorey accidents

"Be like water." - Bruce Lee

the strange curiosity to know if anyone has gotten murdered with water being used like a sword

It's not just water though, the water just carries grit in the middle, the grit does the damage

And it can drown whole countries!

@@AverageAlien They turned the abrasive grit off and it still cut through the hand my guy

In fairness... It really depends what kind of grim you're trying to clean with a pressure washer determines how well it'll clean. Even with my 3,000 psi pressure washer, sometimes it's easier to get a light sponge and rub the dirty away whereas the 0 degree nozzle won't even cut it.

It can also put air bubbles into your bloodstream, which can be fatal. Similar to the bends when deep sea diving. Don’t mess with compressed air or high powered jet sprays.

@@stanettiels7367 not a personal experience, but my boss knew someone who tried to wash their hands with high pressure sprayer. Died the same day unfortunately. Seriously, don't fuck with high pressure things.

@@randommodnar7141 how much did that person wash their hands with the sprayet to cause their death?? I can't imagine that would be a one time thing.

@@stanettiels7367 I seriously doubt you'd be able to cause decompression sickness by hitting one localized spot with a pressure washer. The bends occurs when your blood is saturated with various gases that then nucleate once your entire body is decompressed (similar to removing the cap from a bottle of soda). You'd have to be blasting your body with a pressure washer for quite a while to separate enough gas to cause a similar effect.

dad brother and husband are all construction workers who work with saws and they've all had some sort of hand injury.

Take. Off. Any. Jewelry. Period. My worst nightmare is to get degloved by a bandsaw

Holy fuck thats terrifying i cut my left thumb where it was barely hanging on by a little but of knuckle and skin and cut both tendons in a circular saw accident and i was experiencing the same thing my injury was a paper cut compared to yours lol it happened 7 months ago now and is healed but will never be 100% and always feels like a crazy stretch youre doing where you feel the burn real bad when streching and thats what it feels like using my thumb to max or close to max bend and now i always think when i see a band saw or a table saw or anything like that and think how bad that would fuck me up if id touch it

and i thought losing my nail and damaging my nail bed was bad

@@tomfooIeryz lol that’ll heal like it never happened your all good

@twizzm I appreciate that!🙏🏼

@@amanwithouthope9475 I'm glad to hear you were able to heal up as well as you did. Not only do these accidents hurt physically, but mentally it really can do a number too. The way my accident happened, I guess the generator could have rocked off the top landing and crushed me when they lost grip of the dolley allowing the piece to drop, although highly unlikely. Regardless, it helps me mentally thinking it could have been worse. I guess I could have legitly bled out if we didn't know what to do and tourniquet my arm properly. Even with the tourniquet I must have easily bled out 1.5 pints or so. It flowed from the top floor all the way down 18-22 floors and still pooled at the bottom. Going on 9 years now actually. Lost my home and had to liquidate my retirement/401k to keep a roof over my wife and I's head. Took my case going through the courts over 7 years to finally reach a Judge that found it absolutely appalling that it took that long for an amputee to get awarded disability. So just this past year we were finally awarded SSDI and backpay. The backpay for all those years doesn't even add up to one year of work at my last job and the state settlement for the accident was only $60K, so altogether about 1 year's pay at my elevator job. Pretty tough. The good thing is, my wife didn't leave me and we're finally back into our own place after 6 months living in our car and another year on the other side of the state living on a piece of family property with no power. We're still on the other side of the state but we have our own apartment and we have our health! Anyways man, thank you for sharing your story and for taking interest in mine. My apologies for such a delayed response. Take care and blessings to you and yours!

Yeah. A stern reminder for everyone to treat their tools with respect, even if they aren't working in a job that might get them into a Plainly Critical Radiological Accident documentary. Plain old iron and water can mess you up plenty.

I don't want to be a woodworker any more

I’ve had so many close calls at work. Wire had gotten twisted in my machine, and when I cut it, it knocked my safety glasses clean off. I ended up with the tiniest cut on my eyelid, and it knocked my safety glasses 10-20 feet away. I spent a solid minute frantically touching my eyelid to see if it was bleeding and thanking whatever’s out there that it was only a scratch and not my eyeball.

Forgot to put on my gloves one time and sliced my hand open on a steel plate so I can agree with that. ALWAYS follow safety protocols 👍

it's wild how fast they are, with your hand i imagine you'd only just have a scratch that might not even bleed

@@Selendryle Any slower and that's a finger if not half the hand.

Very important for you to mention this- because the Saw Stop has it's limits in a demonstration scenario, but works extremely well in real-life work situations.

The hot dog alone doesn’t complete the circuit that activates the brake but add you to the hotdog and it is able to complete it

@@hatenbacon8306 That's what we figured would happen, hence the hot dog.

They do work, but the material which the ballistic hand is made of does not trigger it, only the metal inside of it shich holds the bones together triggers it so its really delayed

Jesus Christ died for your sinssssss please repent for the kingdom of heaven is at hand 🦶

@@jesuslovesyou2616 shut up

Let him spread the word🙏

@@jetstreamfam9349 ☆♡

@@yul12twelve I reported him for misleading information. The kingdom of Jesus is not at hand, according to the Vatican and other reliable sources.

Theres countless things when working with machinery and in this craft your survival instincts cant tell if its dangerous or not you have to know in advance and thats why this work should always be promoted with caution.

It's also much more akin to slapping the top of the blade then accidentally rubbing against it. I don't see how anyone would end up hitting a table saw in that way, in normal use.

@@shono1997 a slap like that could possibly occur from a serious trip(never underestimate the power of careless and stupid) but I definitely think that the lack of any connection to ground was why the saw stop didn't trigger.

@@shono1997 lol stuff like that is why they make it, guys that have been carpenters for 20+ years forget how dangerous everything around them is and lose fingers

@@sulkingsalamander6181 I'm gonna stick with what I said here. Idk how anyone slaps the top of a table saw. I mean outside of some insanely unlucky fall as the other comment said lol.

That’s not how it works, does not need grounding

What about an angle grinder?

@@FlamingVaIIey an angle grinder is dangerous and can leave nasty cuts or friction rash but, it won't take your finger off without you even noticing like a table saw will.

@@RamenHutt Dunno man, have seen times where it bounces off and pierces through face protectors like it was nothing

@@RamenHutt your talking like someone that is going to learn the hard way...best learn to respect that grinder more.

@@FlamingVaIIey Both are dangerous as shit. The first time I was using an angle grinder i was a little bit reckless, and by accident i sliced into part of my finger. About .5 cm, but it still really hurt lol I was like 17 at a time