It is shown why the meat grinder does not cut, but wrinkles meat and how the completion of the meat grinder is completed. You can significantly improve the operation of the meat grinder with the help of a simple refinement of its three parts: the grill, knife and screw.
It turned out that the new meat grinder does not scroll, but wrinkles the meat. It turned out that the grill, and the knife, and the screw were made poorly.
It is well known that for any cutting tool, both surfaces that form the cutting edge must be well processed, and the sharpness of the cutting edge, and hence the quality of cutting, depends on the quality of this treatment.
It was found that both the knife and the grill had one of the surfaces not subjected to machining during manufacture, and therefore their cutting edges could not be sharp.
First, I’ll talk about the grill.
Firstly, the grill is not red-hot, it is easily taken with a file. For comparison: at the grate of the production of the KATEK plant in the city of Samara, a red-hot grate, is not taken with a file.
Secondly, holes in the grill are poorly made. I polished the holes in one grill with a drill with an abrasive nozzle.
Thirdly, on the calibration plate I checked the planes of the grating with paint. The planes are poorly handled. I did not modify the planes.
Now I will talk about the knife.
The front surface of the knife was also made without machining. Therefore, the cutting edge was, of course, not sharp. As a result, the meat grinder does not cut but crushes the meat.
I sharpened the front surface adjacent to the cutting edge. Sharpened the same way as the holes in the grill: a drill with an abrasive nozzle.
The auger turned out to be a big round. I removed the envelope and polished everything.
After refinement of the three parts of the meat grinder, it began to work much better: it cuts, but does not crush meat, works without the use of a pusher, it is not necessary to interrupt work to clean the knife and grill.
Thus, if the meat grinder does not cut, but wrinkles the meat, then you can quite simply refine the details of the meat grinder with a drill and significantly improve the work of any meat grinder.
Address of this video: • Почему МЯСОРУБКА МНЁТ ...
Maybe you will be interested to see the Tool. Sharpening ": • Самодельный инструмент...
I invite you to my channel: ukposts.info_videos?o=U