Or to get killed. The components are live in many countries with 230 volt AC.

My thoughts exactly

Também acho!

Y'all have your lights/lamps/ light sockets wired directly to the main electric line or what or you didn't bother with circuit breakers?? 😂

​@@Marcia.Marcia.Marcia, a 15A breaker will not stop creative hands from putting something on fire.

Lesson learnt. Don't waste time on these bogus Craft Idea videos. There is a documentary about them that brings to the table some interesting tit-bits of its own.

Euh... You forgot to add the time typing this 😅

Thanks you saved me

That is why I go to the reviews first. Thank you for going through the pain so I don't have to.

For some people, might be their entire life that they lose.

We wanted to show a creative DIY way to fix an LED bulb, but safety is always a priority! 🔥🚫.

This fix is probably guaranteed to start a fire

Change probably for certainly, don't mess with electricity like this, it only ends in a lot of drama ☠️

​@@jameswalker5645wow, what a total wusse😅

This is totaly safe and wilö not create any fire

Maybe "day before's lesson." 😀

Need speed dial for 911?😅

Wrong. You need to get a bucket of water for electrical fires. To be extra safe, make a small fire, fill the bucket, and put it on the fire for a few minutes. Take your shoes and socks off and stand in it, because the bucket has been on the fire, the water will be warm (for your comfort) that should help also because the fire won't be able to burn your feet, so you can run away if there is an electrical fire. Speaking of which, make sure you replace the fuses in your electrical box with cutlery, as the better connection will ensure you get better quality electricity (you can use the water bucket on the fire while you do this. Make sure you record the whole thing with your phone, so you will get rich from any youtube videos you make of it :)

@@FastBowtie388somebody that does this, yes they do. And probably someone to remind them to breathe in and out!

​@@oscargoldman85I poured 91% rubbing alcohol all over my feet and lit them off because my athletics foot was driving me absolute bonkers and nothing was working. It got way hotter than I expected and now it looks like I shaved my ankles 😂. No itching yet after 18 hours. Oh, if you do decide to try it- make sure the bathtubs already filled with water because it doesn't go out in its own as fast as you'd think. Hope this helps.

Your choice is between having a bulb that doesn't work, and one that dies prematurely. Hmm... An LED bulb that gets hot enough to melt the housing? Not likely if you only do this once, which is all that's being advocated here.

@@Panglos Not worth taking the risk. The bulbs aren't that expensive compared to what damage a fire could cause.

@@Panglosa new bulb is a dollar. I don't think this is a good idea because of the way it's fixed. You're expecting non-soldered contact to last. It's reasonably likely to come loose when it heats up, and aluminum is a horrible conductor without solder because it oxidizes on the surface. A poor conduction can create a fire because resistance turns into heat.

thank you, I was wondering about this. Good to try it in someone else's house-preferably someone you don't like LOL

@@QalinaCom "Good to try it in someone else's house-preferably someone you don't like LOL". Thanks for the tip. LOL

That's why they always get a down-vote.

It's only for views. This guy probably doesn't use this garbage himself. There should be a disclaimer that this is dangerous.

Yes click baiter. Should have used that knife to cut off fingers, to end click baiting ever. How do I block a channel from showing up in my feed?

Mimimi

LED bulbs are so cheap now, and last so long (unless you buy crap) that this sort of "hack" is a total waste of time as well as a risk to anyone who doesn't understand what's going on. I have a nice big box of LED bulbs (like these, and GU10s) and I replace one maybe once every 16-18 months. Done. I'm not "fixing a damned thing with aluminum foil and tape. Literally not worth the time.

He can now buy hundreds of LED bulbs to experiment with! 💡🤑

Bigger question is why 33k retafds upbote this sht

Underrated comment

LOL

Sadly, back in the 1980s, our "professional town electrician" did this on a circuit in the fire station. Four hours later, the fire station caught fire. No lives were lost. We were able to get all the in-service trucks out, but an antique truck was heavily damaged. It was eventually bought by a collector and rebuilt. As to the electrician, he died believing something else caused the fire; his bypassing the fuse had nothing to do with it...despite the wires inside the fusebox having melted.

*Figure (not fact).

A penny? Why? That's crazy talk! Fuses were practically made to accommodate a .22 long caliber round.

Same ilk as the scientists who work on drones, AI, and gain of function virology.

a good man is capable and willing to do terrible things but doesn't do so unless absolutely necessary . A knife is both a tool and a weapon.

@@melodyfleck9368 Meanwhile you're on the other spectrum of Knowledge it seems. The negative one.

@@Adrian2140 No....... There is some truth to what melody is saying. The buffoons in the Wuhan lab were not following the strictest measures when doing the gain of function research. The three original virologist knew they were making a bio weapon, and it killed two the three within the first year. Patient zero was the lead virologist. Why would you capitalize "Knowledge" in the middle of a sentence like that? Are you on the spectrum?

A lot of people are saying...

Haha! Glad you enjoyed the absurdity! 😄 Let me know if you try out the LED bulb hack!

That is the best way to fix them. A waste of time if It's only one bulb that has blown. Time is money. I have 10 + crapped out LED bulbs at home that need replacing with NEW bulbs. I'll be keeping the old ones for spare LEDs. That should give me a good stock of future spares. As for patenting... that's not gonna happen, this is not novel. Some fear a fire risk. That's not going to happen either. This is a good fix in a pinch. The method is very refinable.

​@walsakaluk1584 it can actually cause the mosfets to over heat. There's isn't zero risk of fire. Though it will penalties just fail the smoke test and stop working. If you knew how junky they make electronics these days.i would never put more load on those underspec components.

its is pretty hard to solder them in, the base is a heat sink and it soaks up all the heat, i can buy the bulbs for $1 and they last about 4 years, just not worth it, if you want then to last longer lower the current by changing the resistance

False, it depends on how the driver circuit was designed. Most are current regulated and it won't matter if it had been done properly (solder a bridge/jumper across the pads where the LED was). Instead of spreading FUD, whip out a multimeter and measure it for yourself.

@@walsakaluk1584 Not necessarily a waste of time. In areas where nobody can come in contact with them, I often de-dome bulbs like that, because the globe blocks around 30% of the light and in some cases, you don't even want the light radiated in a ~300 degree beam, but don't have a proper floodlight either or don't want the beam that focused. If you have the dome off anyway, it literally takes only a minute or two, to find the bad LED and tack on a jumper wire that you solder down. However if you can't do a good solder joint, it should not be done at all. Further, it is ridiculous for you to pretend that time is money when you are here watching this crappy video. Your time is not worth much. ;)

Not if you love them

A lot of work for something that costs so little. I'd just replace it.

What if you’re to the point you can’t afford new bulbs. Say your on Government assistance. Something happens and no check. Good to know.

With low cos,high risk comes follow😅

I had to repair one, I'd just solder across the contacts.. No chance of foil getting hot that way.

LMAO

@bvgb921 and the "Mexican jumping bean." that's important for defib recovery.

Why stop at just electrical tape? Try adding some glitter for a truly dazzling effect! 💡✨

I have the same question.🤔🤣

Clickbait

yet nobody reports the fact that the title and picture are clickbait, I always report the spam/misleading text

@@mumrah73 I reported it as “Misinformation” and in the details wrote: “Video suggests a very dangerous way of doing an incomplete, unreliable and possibly unsafe repair of an LED light bulb. An inexperienced viewer could easily be electrocuted or cause a fire or other harm by following the advice of this video. Also, the title and thumbnail are misleading.”

@@ethanlamoureux5306Thanks, but unfortunately, here it is 2 days later & it's still up. I'll try tagging it & then I'll also click on the "do not recommend this channel"

Now THIS would make a good video.

ha ha ha

🤣

I was thinking something along those lines too. I'll mess with wood, carpet, doorknobs and picture hanging hacks, but def draw the line at electricity!!!!!

Sometimes the 99 cent store or Costco runs a sale such as a 10 pack for a dollar because the local power company subsidizes the cost. They practically free...

You're right, safety should always come first! Make sure to handle electrical projects with caution and follow proper safety measures. 🔌💡

@@CreativeHacker7 Except you just made a video advocating a super dangerous practice. So wtf are you talking about?

Not really a fire risk unless you're screwing with the mains side of the board, that and it has a fusable link. The real issues is with a jumper you're overvolting the rest of the led in series which will shorten their life drastically. Overall though not worth doing basic LED bulbs literally only cost like a dollar and twenty cents.

@@McPickleness Just covering his ass for legal liability while pumping out BS content for views.

impossible to start a fire stop spreading your ignorance!!

they would have sold him a new bulb too

@@Reds_Scrapyard yeah but what if you're on lock down and you can't get out of your house because of all the illegal unvented terrorists have taken over your city?

I'm retired television technician, it's safer to SOLDER in a tiny resistor across the terminals and I used to do this with LED backlights that went open circuit.

If you have the resources to spend money on a set of pliers, you probably would have turned this video off after about 35 seconds.

It's also easy to solder in an actual LED.

I understand your concern about the cost, but this method is a creative alternative for those looking to save money 💡.

The manufacturer might just send a free bulb your way! 😉

This guy must work for Big Fuse an industry just as insidious as Big Pharma. Keep a roll of pennies next to that ancient fuse box. I just saved you a panel change.

You mean the ceiling birds? They still alive and chirpin but I don't know what they eat

what on earth are you bullshitting about@@ImAlxxy

re: "here's a half dozen ways this can go really bad." Um, name a couple, please.

@@uploadJ - It would be a pleasure. Because I am feeling generous today, I'll give you three. Replacing that LED with a wire lowers the voltage drop and increases the current in that circuit. This will generate more heat and increase the load on the power supply, possibly beyond its design specs. Aluminum foil is a very thin conductor and not meant to carry a lot of current. There is an excellent chance of heating, possibly a fire. That aluminum foil was only taped down. Not the best possible connection and another source for heat. As the joint heats, it will loosen that plastic tape. That will loosen the joint further leading to more resistance and more heating. Could make a fire. This is a bad idea all the way around.

@@uplinktruck re: "Replacing that LED with a wire lowers the voltage drop and increases the current in that circuit. " Luv you guys that don't understand the use of constant-current driving circuits ... missing one LED voltage drop would make very little difference, Dunning-Kruger, who just learned electronics a few years back?

Why not give it a try? Wrap an LED bulb with electrical tape and see the magic happen! 💡🔌

@@CreativeHacker7 After I stick a fork in the outlet I'll give it a try 😁

@@CreativeHacker7 How about just not being a deceptive scumbag?

Sounds like a bright idea! 😉👍

LED are a resistive load... so they only consume the electricity they need...

@@nickdannunzio7683 its depends on the type of the driver and the power factor.

LED drivers work as constant current source. So the current stays the same and just the overall voltage of the whole string will be lower. If you stay in reasonable range(only 1-2LEDs bridged), it will work 100% fine

@@lukasandrysik3666 OK, that makes sense. I initially had the same thought as the OP, because normally when you rig up LEDs you use a constant voltage and choose the resistor to make the current correct (accounting for the drop over the LEDs). In that case, removing the drop of an LED could be a problem....maybe a big problem if most of the drop was over the LEDs and not over the resistor (which is what you want for efficiency). But sure, it makes sense a production bulb would have a smarter and more robust design than that.

That's consistent with my observations about these LED lamps.@@lukasandrysik3666

I run my LED's at 15-70% because of the heat / lifespan issue.

100% dead on correct! With even a brief guide on led types and their voltage jumps/shorts reactions!! I don't think that it could have been said any better, (without going into a 10pg detailed manual of course, lol)! props 2 you my friend!! 😉😆🤯🥳💥💯💥😎

Friggin incredible to see a comment or reply that's actually informative and factual without

Got cut off lol. You stated facts, made sense, we're incredibly informative and didn't have to be a smart ass about it or bash anybody, had a view of both sides of the issue(should you or shouldn't you do it), advised people of the danger, reminded them to be safe and taught me something in the process. You sir are awesome! We need more people like you in this world. Nice to see someone wanting to share their knowledge with people without being a pompous dick about it.

The statements are 99.9% correct, I can confirm this as an electronics engineer. LEDs are getting better from year to year, but the manufacturers install the cheapest ones (cost-profit analysis). However, the safety of human life should be valued more highly here. What does a new lamp cost compared to a deadly danger!

At least solder the jumper in place...👍.

Resistance is key in understanding electrical concepts! 💡 Keep experimenting and learning!

actually this combination is super strong - if some glue comes under

I simply scraped the area well and applied a bridge of solder much easier .

Hello ! May Allah protect and guide you to his light and happiness in this life and the hereafter, God bless, Ameen. Excuse me for giving a little presentation of Islam, because it is very misunderstood nowadays, especially on those « Antichrist's » times, where media and politics are mixed to distort history and truth. Thank you very much for your time. Islam is an arabic word that means the Surrender to the One and Only God, our Creator, Protector, Provider, who gives us life and all that we have, we are safe and sound by his will and grace, we are His and to Him we return, and we have to thank him in this trial life by submitting to him by our free will, or later in the Day of judgment when it's too late to save our own skin. Islam was the original Religion descended to earth from heaven with Adam and Eve (peace and blessing be upon them) in the beginning of humanity. and was passed to people with the succession of the 124 000 prophets and 315 messengers of God to all nations and civilizations since, passing by Noah, Abraham, Isaac, Jacob, Ismaël, Joseph, Moses, Aaron, Joshua, David, Solomon and Jesus (Peace and blessing be upon them) during the history of mankind, the last replaces and completes the previous, until the succession of the last messenger of God fourteen centuries ago, Muhammad (Peace and blessing be upon him) to complete the noble morals of all mankind, to bring humans and jinns out of darkness into light, and to purify people's religion and belief from corruption and polytheism, and return it to purity and true monotheism, like it was in the times of the prophets (Peace and blessing be upon them). Many Religions that we know nowadays, at their beginning were true and under Islam, initiated by one of the prophets of God, but their original teachings, history and scriptures have been corrupted over time with falsification and polytheism, or lost and replaced with false ones. That's why Islam is the only Religion accepted by God nowadays, which consists in bearing witness that there is no god besides Allah (God in Aramaic, the original language of Jesus and the Gospel), and that Muhammad is His servant and messenger, just like Jesus and Moses and others are His servants and messengers. Never a messenger of God said he was God or literally son of God, it was the people after him who changed the words of God and corrupted the Religion. God is unique and absolute, He does not need to have a family and sons or to associate anyone else with His kingdom, He can simply create whatever He wants, everything belongs to Him, and to Him everything will return. Allah said in Surah Al-Mu’minun : “God has never begotten a son, nor is there any god besides Him. Otherwise, each god would have taken away what it has created, and some of them would have gained supremacy over others. Glory be to God, far beyond what they describe. The Knower of the hidden and the manifest. He is exalted, far above what they associate. (91-92 / Translated by ITANI). Allah means the one and only God, the God of all prophets and creatures, the creator of the universe and mankind, and the Master of the Day of judgment, where our destiny, Hell or Paradise, is decided based on our faith and deeds in this trial life, and above all, Allah's mercy. Allah said in Surah Al-Ikhlas : In the name of God, the Gracious, the Merciful. Say, “He is God, the One. God, the Absolute. He begets not, nor was He begotten. And there is none comparable to Him.” (1-4 / Translated by ITANI). Allah said in Surah An-Nisa : O FOLLOWERS of the Gospel! Do not overstep the bounds [of truth] in your religious beliefs, and do not say of God anything but the truth. The Christ Jesus, son of Mary, was but God's Apostle - [the fulfilment of] His promise which He had conveyed unto Mary - and a soul created by Him. Believe, then, in God and His apostles, and do not say, "[God is] a trinity". Desist [from this assertion] for your own good. God is but One God; utterly remote is He, in His glory, from having a son: unto Him belongs all that is in the heavens and all that is on earth; and none is as worthy of trust as God. Never did the Christ feel too proud to be God's servant, nor do the angels who are near unto Him. And those who feel too proud to serve Him and glory in their arrogance [should know that on Judgment Day] He will gather them all unto Himself: (171-172 / Translated by Muhammad Asad). Allah the Most Merciful said in Surah Ali-Imran : Behold, the only [true] religion in the sight of God is [man's] self-surrender unto Him; and those who were vouchsafed revelation aforetime took, out of mutual jealousy, to divergent views [on this point] only after knowledge [thereof] had come unto them. But as for him who denies the truth of God's messages - behold, God is swift in reckoning! Thus, [O Prophet,] if they argue with thee, say, "I have surrendered my whole being unto God, and [so have] all who follow me!" - and ask those who have been vouchsafed revelation aforetime, as well as all unlettered people, "Have you [too] surrendered yourselves unto Him?" And if they surrender themselves unto Him, they are on the right path; but if they turn away - behold, thy duty is no more than to deliver the message: for God sees all that is in [the hearts of] His creatures. Verily, as for those who deny the truth of God's messages, and slay the prophets against all right, and slay people who enjoin equity - announce unto them a grievous chastisement. It is they whose works shall come to nought both in this world and in the life to come; and they shall have none to succour them. (19-22 / Translated by Muhammad Asad).. God said : Say, “We believe in Allah, and in what was revealed to us, and in what was revealed to Abraham, and Ishmael, and Isaac, and Jacob, and the Patriarchs, and in what was given to Moses and Jesus, and in what was given to the prophets from their Lord. We do not differentiate between any of them. And to Him, we surrender.” (2:136 / Translated by Community) Salam (Peace) -----

I wonder, if you're soldering, perhaps put in a replacement LED? The trick would be to figure out which LED, and keeping a supply of most-needed LEDs. Also wondering how easily the plastic bulb pops off and pops back on. More super glue?

In the US, these bulbs can be had for $1.25 all day long. I don't waste much either, but this is not something most people should try just to save a dollar.

It's great to hear that you found the tip useful! Just be sure to keep an eye on those old parts with the increased power 💡🔧.

Sounds like you need to watch the rest of the video to see how innovative duct tape can be! 😉

like the LED's getting brighter and heating up because he removed one of the voltage drops in the circuit?

He saved $2 on a new bulb, now he's looking for a new house what with that fire

The bigger question for me why he wouldn't have just disconnected the bulb from the electrical circuit.

just repair the bulb so you don't have to buy another.

@@SPINNINGMYWHEELS777 Because we're not dirt poor goat farmers like you.

We prioritize safety in our videos and always recommend caution when working with electricity! ⚡️ Stay safe and have fun experimenting with LED bulbs!

It's only ~2 v across each LED, but still, this is a stupid idea.

The danger with mixing the aluminum and copper wiring in a house isn’t because of the metals themselves, but because any connection that isn’t very good will allow the aluminum to start to oxidize and build up a resistive layer that gets hot and can start a fire

If that were the case there would be fires all over the place every day, you would literally see houses burning everywhere. It's bs. They occasionally burn down because drunks pass out while smoking in bed.

@@smokeydiamond489 Nobody smokes in bed anymore. You seem to be convinced mixed copper and aluminum wiring is ubiquitous, is that what you're trying to say?

The larger problem is that the aluminum is already oxide covered and even a worse conductor by just being laid on the contacts, not even sufficient pressure. However, it is most likely to just cause a fault where the bulb stops working again. It would not spark much if at all because of the low voltage difference between the contacts and even if it did, that heat would quickly degrade the tape and glue and open the circuit. It is different when the voltage is still mains 110V/220V and much more current capacity.

Maybe my hands are just too good for patents! 💅🏼💡

Sometimes the best ideas are the simplest ones! 😄👍

hahahaha good one!!!

Don’t be ridiculous, of course you have to do it on grass. Wouldn’t he have done it on a table or anything else more practical if it was possible…

I've only ever worked with LED bulbs on grass. I was just curious.

Do everything on grass.

Well, my neighbours did object to our dog taking a shit on their lawn. But, in principle, yes.

I think he'll get a Darwin Award for it.

Yeah, a bit of lecy tape around the tweezers. All good mate. No chance of accidental death. 😂😂🤣🤣

Said the fire department chief.

Your just cheap

One more slap

Now your LED will sleep soundly, wrapped in electrical tape! 😄💡

Sounds like you may have found a new way to assemble the LED bulb! 💡👍

saw that cap as well and was thinking same... that's a pop waiting to happen...

@@CaptainSeamusand when and if that happens nothing other than the light going dark will happen . Oh no!

​@@billpii6314 : *Electrical caps usually short when "popped." Blown caps are usually the cause of other blown components in a circuit.*

Look carefully at the "bulge". Note the symmetry. It's a part of the manufacturing process, not an indication of impending failure. Any bulge present on an aluminium can type capacitor will be at the lead end, which is a rubber/neoprene disc. Always has been, always will be. Check one from an old (valve/tube) radio. Some have a manufactured blow-out point, which can be seen as a small round mound on the surface of the rubber surface.

​@@blijj3450 : *Those scores on top are to allow for heat expansion and any bulge is an indication of an electrolytic capacitor having increased ESR, causing the increasing temperature, which means it is defective and needs replacing; any **_"symmetry"_** is because of those scores. Old electrolytic capacitors have catastrophic results when gone bad and LED bulbs do not use antique capacitors for an obvious reason; they are old.*

this is not a problem if the regulator chip is a constant current mode regulator, which is common with strings of led cob smt strings

@@49erjohn Yeah, those would be the heavy and expensive ones from reputable brands from the west. This is clearly not one of them. The diffuser cap, to start with, is typical for Chinese junk. Next to that, it is extremely obvious this is an unregulated cheapest way to get the voltage down. You get zero points .... thanks for playing! 🤡

I agree with you

> know how to *solter* Know that it's solder.

thx :)@@planethedgehog2427

Please be cautious and follow safety guidelines when experimenting with electrical items. 🔥.

@@CreativeHacker7 oddly enough I had to change a lightbulb this morning and thought about this very video 🤣😂

That's a great tip! Feel free to check out the results of wrapping an LED bulb with electrical tape in my video 😉👍.

I'm not an electronics expert but as soon as I saw the power connected I thought, this could end badly. This is a really negligent video.

Yeah I reported it, looking through the other videos on this channel, the whole thing needs to go away. All the advice on this channel is danger.

The purpose of testing while ON was to detect the faulty LED with the tweezers, which is why he covered the tweezers in electrical tape.

@@DigitalIP Get a multimeter. They are less than $20. Doing this with tweezers with electrical tape on the couldn't possibly go wrong ever. Don't work on electronics while they are plugged in.

@@SheppyHand Yeah i know, i was just explaining his use of electrical taped tweezers though.

at last someone with a lick of sense.😸

It's great to hear your perspective on the safety aspect of this DIY project. It's important to consider all angles when working with electronics.

I agree with all of that, simply start buying incandescents when possible, I am living proof that they out last these crappy LED bulbs, dont care about the power consumption, I can say that my power bill has plummeted, 70, no 80 cents annually when compared to incans

Except you do not do it yourself BECAUSE you are soldering it which was the issue all along, the need to create a permanent path that conducts well instead of that joke in the video.

@@GilmoreStrat Meh, disagree completely. I hate throwing away the LED bulbs, but in practically all cases where decent quality, major brand bulbs were suitable for the lamp/enclosure/etc they were placed in, they last long enough that their reduction in power consumption, more than pays for the bulb's cost. This was not the case many years ago when LED bulbs were much more expensive, but today most common bulb form factors are very inexpensive. However unlike what is shown in the video, most LED bulb failure I've observed were from the driver failing, not one of the LEDs, and often the driver in decent quality bulbs is potted and not reasonable to repair.

LED Bulbs are quite affordable nowadays, you'll be surprised! 💡👍

Good idea. Easy enough to check with a VOM.

the "resistance" with leds isn't as straightforward, the resistance isn't linear like with a resistor. you could replace it with a led or a diode. also the driver on led bulbs isn't like a constant voltage source usually.

definitely solder bead. no resistor. no additional amps. existing current setting resistor already does the job. these bulbs are current regulated.

LED = light emitting diode

They are too cheap today to bother with this.

Sorry, that's not me! But feel free to try wrapping an LED bulb with electrical tape for a cool DIY project 🔌💡.

Wrap another bulb with tape and watch your savings grow! 💡💰

Think bigger, friend. Repairing this diverts plastic from landfills, which makes it worthwhile.

@@BluetheRaccoon Yes, please do this with one of your bulbs. Later you can tell us how the bulb caught fire since you're essentially bridging an incomplete circuit with a 100amp fuse and your house burned to the ground after the tape and glue melted.

@@BluetheRaccoon Well that depends. It looks as though these bulbs are in series, so now more voltage to smaller number of bulbs. May be overheating. Maybe fire. Maybe a whole bunch of waste from a fire going to landfill.

@@sarcasticguy4311 Impossible. The LEDs are driven by a low voltage circuit at 28volts. That driver circuit can only handle a certain amount of current (which varies by the bulb design brightness, ie 40watt or 100watt equivalent). If the current draw of the LEDs goes above that, even by a short circuit of foil to some random part of the circuit, that driver will fail, stopping current.

@@javaman2883 You'd like to think so but you'd be surprised how easy it is to start an electrical fire.

....unless you WANT to burn down your house... :)

I agree, removing one LED will increase the voltage to the other LED's and could over heat the mini transformer. Good hack but NOT SAFE -- DO NOT DO THIS --

It's perfectly safe all that will happen is the next bulb burns no fire will happen

@@jamesprather1723 Please do this then and tell us what happens. This is a fire hazard waiting to happen.

How much resistance do you think a led that size has.

Great hack! Using electrical tape on an LED bulb is a clever idea! 💡👍

The dental floss reference was good. I was thinking more like how to clean and reuse paper plates again for next years 4th of July party This is 3 minutes and 41 seconds of my life I'll never get back.

I'll just get another free bulb, thanks anyways.

Énorme !

Toilet paper has two sides, so you could use it at least twice. You can also dissolve paper in water and then use a sieve to make new paper.

Brown paper?

Wrap that LED light with electrical tape for extra durability and longevity! 💡🔧

I basically used my larger channellocks to get a grip on them and twist. You have to essentially shear off the glued seam and it feels like they use some sort of primer/glue setup like when doing PVC pipe. It's very strong but it lets go clean. You gotta apply some pressure to get it off though.

Maybe as the globe ages , the glue ages and the diffusor comes off easier than a new one.

I literally just now grabbed one and it popped right off with hardly any pressure so I guess it’s possible.

@@stringsattached67 very good

in asia they pop off easily usually. now also for someone with a western income level, there's absolutely no point in something like this. but consider if your income was 300 bucks for the month. also the sketchiness of it as an electrical thing would not look like a big deal to you since you could see sketchier electronics by just poking your head out of the window of an apartment building and taking a look.

Thank you. ❤ much easier. 🙏👍

That is the only proper way to do this fix. Putting aluminum foil in contact with no physical connection will fail quickly.

Yes, and once that piece of foil and tape (that wasn’t glued down) comes loose, it has a good chance of shorting out the rest of the bulb.

lötkolben

See, I throw my burned-out bulbs in the garbage. Then replace it in five seconds with a new one that costs a dollar.

That's a lot of steps....Cyanoacrylate is conductive; my guess is you could skip the foil and tape, and just short the terminals with the glue. That is, if you don't care about the fire risk from both the glue and the overheated LEDs.

Why buy when you can DIY? 😉🔧

It is a shame that you don't understand time. Doing the repair properly would literally take two minutes. You would still be watching youtube videos two minutes from now otherwise, not even on your way to the store yet, lol. What is this strange nonsense these days about actually lifting your arms to do a thing, where spending a whopping two minute makes someone try to pretend it is arduous when it is about the same amount of work as putting your shoes and socks on?

Très bonne remarque

what if you put a fuse in there instead to keep the voltage the same or regulate it?

@@Bewefau ... not a fuse, but a 15 ohm resistor. Except if you are going to go to that trouble, why not replace the LED.

@@stancoleshill8925 When all the LEDs go out if only one fails, then they are wired in series, meaning the power goes into one then into the next and so on. These LEDs operate at about 2.7 to 3.4 volts. If the voltage regulator circuit in the center is set to provide 32 volts to ten LEDs in series, then each LED "drops" the voltage by 1/10 or (in this case) 3.2 volts, within the operating voltage of each LED. If you bridge out one of the LEDs the 32 volts is now being divided into 1/9th by the remaining LEDs or 3.5 volts. If you bridge out 3 LEDs the voltage the other 7 LEDs will drop is now 4.6 volts. This will most definitely burn out the remaining LEDs. Its not that the supply voltage increases, it's that it gets divided by fewer loads.

Y] y 8

McGuyver Derangement Syndrome is no match for the creativity of DIY enthusiasts! 💡🔧

Translation..."This guy is a dumb ass!"

Seriously! Resistors and LEDs are dirt cheap.

If they were intelligent enough to compute the proper resistance value

@@Picla_Peremohy Yup. This video could have offered an example of what to get and how one would know.

Great advice. It is not hard to solder a surface mount led onto the board.

That's a clever trick! 🧐 Have you tried out the LED bulb wrapping method yet? 😉

Haha, thanks for the suggestion! 🤪 But I'll stick to my LED bulb experiments for now. 💡

I see comments like this a lot, but it's never ever explained. HOW is this a fire hazard?

@@samsmith6169 A bit of foil isn't designed to carry electrical current and isn't spark protected.

@@samsmith6169 You change the electrical characteristics of the circuit by short-circuiting one bad LED. Each LED has an expected forward voltage drop and current associated with it. So you will be increasing what each is designed to handle. Will the new voltage drops and current be within tolerance? Who knows? What if you found three bad and short-circuited all of them? Rest of the circuit probably not within tolerance now. Light output goes up, but so does heat. The power supplies run pretty dang hot in these as it is.

@@samsmith6169 Another good example would be why you aren't supposed to pull a bad fuse out of your car and replace it with a bent paperclip. You're WAY overdriving the system and you'll burn it out if lucky and start electrical fires if you aren't.

Thanks for the comparison! 😄 MacGyver would be proud of this DIY hack!

COULD YOU NOT DRILL OUT THE SEIZED PLUG AND RETAP THE THREADS. THEN PUT ANOTHER PLUG IN?

And the bunch in control of our government now have eliminated the incandescent light bulbs and make you buy these Chinese made ones.

They are wired in series due to the shape of a diode's I-V curve. You can get pissed if you want, but I doubt that semiconductor junctions behave this way just to upset you.

@@markdavis7397 I disagree. The PCB (printed circuit board) could have easily been designed so that the LEDs are in parallel, and the power supply adjusted accordingly. It is a SCAM on the part of the bulb make.

@@ericwes7351 Well, you partly right but mostly wrong. In theory yes you can do that, but it would be woefully inefficient, or expensive, or unreliable, or all of the above to some degree. If you want it to be cheap, efficient, small, reliable and manufacturable, you put them in series. Otherwise, you would need N current sources for N LEDs. And those sources would be regulating to a lower voltage (which is more expensive and less efficient). If you try to cut the cost and size of those current sources by (for example) using a simple resistor on each branch, then the only way to make it robust against normal component variations and aging is to put a lot of the voltage drop over the resistor (i.e., huge wasted power, and thermal difficulties). Putting them in series is not a scam, it is just the best way to wire LEDs, when viewed holistically. Yes, it does have this one problem, but solving that problem creates far worse problems. If you have a better design, start a light bulb company.

@@markdavis7397 Very interesting. Thank you for that very useful information. I don't feel scammed now!

🤣

Desoldering the LED properly is always the best option for a clean removal without damaging the components ✨🔧.

The best way to fix this is to get a new bulb.

@@justtinkering6713 but what if you're on lock down and you can't get out of your house because of all the illegal unvented terrorists have taken over your city?

Spend the $5, save a house 💡🔥.

I hope you enjoy the bright and safe light of the LED bulb in our video! 🔥🚫

Because the creator is a fucktwit.

Video izlemeye vakit var!?

you obviously do you watched the video.

@@SPINNINGMYWHEELS777 I mailed him a dollar so he could buy a new bulb.

Wrap an LED bulb with solder mass instead of electrical tape for a safer option! 🔥