Wifi scanner and jammer using NRF24L01
Переглядів 44,433
Рік томуWi-Fi scanner and jammer project was created by one of the people in UKposts, whose channel address I won't share because I don't want you to see a fake video. A project has no value, but I will recreate this project with my own design so that you can use it. After a few minutes, it was able to work properly, but then it stopped working again.
✅Be sure to subscribe to the channel and write your comments.✅
Part2: 🔴 • Wifi scanner and jamme...
Useful video: 🔴 • DIY Security Camera Us...
Codes: github.com/BabakStars/A_fake_...
Circuit diagram: github.com/BabakStars/A_fake_...
For business inquiries: torabibabak453@gmail.com
Follow Me on social networks:
Instagram ► / winkingstars
Threads ► threads.net/@winkingstars
Twitter ► Babak58141681?t=jKRacuTgewA3Y49f4BQYXQ&s=08
Github ► github.com/BabakStars
Music:
The Gentlemen - DivKid
@meditationmusic5598 Рік тому
Also does it really work?
@Dannydawson537 5 місяців тому
Hi sir I’m from the uk 🇬🇧 and I really enjoyed your video thanks for sharing it , I’m not a professional like yourself so I have a couple of questions if you could help
@BabakStars 5 місяців тому
Hello my friend, thank you for your comment. Of course, if you have any questions, ask. I will answer if I know.
@channelminecraft2857 9 місяців тому
bro, is using three nrf24l01 modules better than one nrf24l01 module, and can this tool block signals or wifi?
@BabakStars 9 місяців тому
Yes. Naturally, you will get a better answer with more modules. But wait for the new video.
@user-mi6ht9lm1n 11 місяців тому
Hello, Sir, Al-Suwaij, number two, connects from one side of the Arduino to No. 2 and No. 3 from either side, the D or A, and the other end of the Swij goes to ground
@BabakStars 11 місяців тому
Hi, sir. If I understand you correctly, you are talking about the buttons that connect to the arduino? it's true?
@user-mi6ht9lm1n 10 місяців тому
@@BabakStars Thank you, sir. I mean on one side it is connected to the Arduino, and on the other hand it is connected to the ground, i.e. the negative side
@BabakStars 10 місяців тому
Yeah. True
@user-mi6ht9lm1n 10 місяців тому
@@BabakStars Thank you, sir, and sorry if my questions bother you
@BabakStars 10 місяців тому
@@user-mi6ht9lm1n don't mention it
@ac1d107 7 місяців тому
does this block 5G connections ?
@BabakStars 7 місяців тому
In the second part and in the description part of the same video, it is said that this does not work.
@scienceine 9 місяців тому
Please how to mke long distance woki toki?
@IamJohnKelly 8 місяців тому
Where can I buy them
@BabakStars 8 місяців тому
Hello my friend. Amazon is one of the most suitable websites to buy them.
@tonkofonko 7 місяців тому
Hello great video, please make some new arduino hacking tool for example Esp32 WiFi Hacking or Kali Linux Hacki g with python or RFID Card read/write or something else. Have a nice day.
@BabakStars 7 місяців тому
Hello my friend, thank you for your useful comments. You also have a good day ❤️🙏
@channelminecraft2857 9 місяців тому
Bro, why did mine just turn on when it just said "jamming channel1" even though I haven't pressed any buttons and the scanner doesn't work
@BabakStars 9 місяців тому
Hello my friend. Be sure to read the description section. Yes, by default jamming is on channel one. My circuit doesn't work either
@channelminecraft2857 9 місяців тому
@@BabakStars bro, how do you get out of channel 1 and what are the pins for the buttons?
@stefanadrianelefterescu8027 3 місяці тому
would this work with the pcb antenna version too?
@BabakStars 3 місяці тому
I explained in the description. It didn't even work with this module.
@SaifKhan-gx9lf 3 місяці тому
Bro can you tell me which kind of battery do you use for on this 5v or 9v battery??
@BabakStars 3 місяці тому
Hello. I used two lithium batteries that are connected to the VIN pin of Arduino. It means 7.4 volts. You can watch the next episodes of this project in the channel.
@SaifKhan-gx9lf 3 місяці тому
@@BabakStars hmm I can't wait for your video because I have to give this project tomorrow so can you tell me last thing if I used 3.3 v regulator for this project because as you know that nrf would have 1.6 till 3.6 v input voltage so if use regulator would it will be start and last again sorry for that I have issue I just used female to female wires for this project I don't connect any thing with board except only battery connection so if I do this would project work properly or still give me issue on that??
@BabakStars 3 місяці тому
@@SaifKhan-gx9lf I wrote in the description section that this project does not work. But in the second part of this project, I connected the regulator, but I did not get any results.
@SaifKhan-gx9lf 3 місяці тому
@@BabakStars ohh no so this jammer will not resist any internet in a single mobile??so why it's is popular in a Arduino projects I got this from the Arduino main page
@BabakStars 3 місяці тому
@SaifKhan-gx9lf Unfortunately, not. I made this at the request of another person. But look at this one.ukposts.info/have/v-deo/naeVgmucg62rmKs.html Could you send me that Arduino main page?
@f7p1764 6 місяців тому
put it to the bin.. and buy portapack.
@BabakStars 6 місяців тому
Yes, it will be very beautiful, but I said in the description of the video that this does not work
@novazero1653 10 місяців тому
lo conecte todo y no funciona, encien de la pantalla y dice que esta trabajando pero no bloquea nada, alguien tendra la solucion ? saludos!
@BabakStars 10 місяців тому
Read the video caption. I will prepare another video about this.
@novazero1653 10 місяців тому
@@BabakStars excelente muchas gracias!
@RXH8 5 місяців тому
Can you make it bluetooth jammer with 3 nrf?
@BabakStars 5 місяців тому
I made it once before. It was not working well. In general, the project with nrf24 is not interesting.
@RXH8 5 місяців тому
With 3 nrf ? I saw at instagram and youtube some one build it and works fine And its can be add more than 3 nrf
@BabakStars 5 місяців тому
OK. I will make a video about it and try to go over everything.
@user-mi6ht9lm1n 10 місяців тому
Hello sir, sorry if I bothered you, I need your help. The screen that I have is different from the screen in your project. My screen works on the SH1106 library. I tried to replace the library and insert it into the code. I did not succeed. Please help me. How do I replace the SSD1306 library with the SH1106 library?🙏
@BabakStars 10 місяців тому
Hello, you do not need to replace. If you can install the correct library, the display will work fine. Just search for SSD1306 and install the Adafruit SSD1306 library. There are no special settings.
@user-mi6ht9lm1n 10 місяців тому
@@BabakStars Thank you, sir, for your reply, and sorry if I bothered you with my many questions. I will try what you said
@yatharthop6010 3 місяці тому
Hello sir does it is really block the 2.4 ghz wifi
@BabakStars 3 місяці тому
Unfortunately, no. Read the description of the video.
@billybob8686 2 місяці тому
No talking, no sale
@BabakStars 2 місяці тому
Watch other episodes
@meditationmusic5598 Рік тому
Circuit diagram please
@BabakStars Рік тому
github.com/BabakStars/A_fake_thing/blob/main/cd.jpg
@meditationmusic5598 Рік тому
@@BabakStars yes bro but please make a circuit diagram with the buttons I don’t know where to insert the buttons
@meditationmusic5598 Рік тому
@@BabakStars also does it scan through nearby WIFI connections and then you can select them to jam? By the way, what is the efficient range of the jammer? Of course I won’t use it for anything bad, just for testing
@BabakStars Рік тому
Defined in the program. Pins 2 and 3 are connected to the microswitch
@BabakStars Рік тому
Actually, I did not get a good result, but if you made the project and got a good result, please share with me.
@ECPranjalGujarndshift 6 місяців тому
Components used????
@BabakStars 6 місяців тому
NRF24L01, arduino nano and SSD1306 OLED display
@user-mi6ht9lm1n 10 місяців тому
Hello sir, the screen is not working properly, please help🙏
@BabakStars 10 місяців тому
that is weird. I don't know where the problem is
@user-mi6ht9lm1n 10 місяців тому
@@BabakStars At the top of the screen, lines appear in width, and at the bottom of the screen, numbers pass by at a speed that I cannot read🙏Screenwriting does not appear as it does in your video
Суспільне Вінниця
Переглядів 529 тис.
KendinYap
Переглядів 199 тис.