Wiha Technician Bit Kit $17.74 - amzn.to/3fMboL4 Wiha Technician Screwdriver - Will update when available

Received mine today after a looooong wait. Thanks for your videos, you quickly became one of my main source of information when it comes to tools. Greetings from France.

Recently bought this bit set based on this video. Love it. It did take a while to get. I forget exactly how long....maybe a month. Worth the wait. Fits perfect. Easy to insert and extract. Meets my most common needs.

Been doing maintenance for 50 years. I have carried a Leatherman tool on my hip since 1983/1984. I have those flat bits and they're carried in the sheath WITH my Leatherman and bit adapter. They have worked well for me. Both racks of bits fit in the sheath as well. What he didn't address is carrying the Wiha bits. Your multitool should never be used as a primary tool for anything...only as a backup. If you need to torque down an a screw...do it with a screwdriver. A multitool is all about convenience and having everything right there where and when you need it. The last thing I need is another pouch to carry with bits.

Awesome Leatherman hack. Thank you! I've also discovered the 77783 kit which is a security bit kit. Handy little tools for many many jobs!

Dude, you're a day late for me. I spent hours last night online trying to find a solution for exactly what you described. Thank you. This will be perfect setup for my Surge and additional Bit Driver Extender. Again, big thanks.

Dude, amazing job. This is just the info I needed.

Thank you very much, the bits are exactly what I have been looking for.

Welcome back! I missed your awesome videos.

Great video! Thanks! I went with 77780 instead as it has hex bits rather than square bits

For my current job, since we only deal with Phillips, standard, 3mm, and 4mm hex bolts, I’m pocket-carrying the Arc, with a Wiha 3mm/4mm hex bit in my ratchet driver extension. I keep the sheath with the full Leatherman bit kit and remaining Wiha Industrial double-sided bits where my multitool would go, in my backpack, so I can travel light with everything I need on my person. It’s a fantastic setup.

I bought that bit set. I have to use the pliers to pull them out of the Leatherman bit extender. Pain in the ass.

just ordered one. I have never had my leatherman ones fail but I know better to over torque them. they are designed to lay flatter of course for easier carry. I need some security bits.

A great bit set, but I have to use pliers to get them out of the extender. That may change with time and use.

I love these bits

This is awesome 👍 I've been looking for full sized 1/4" bits for my Leathermans that will work with the bit adaptors 👍

Great info and really cool to know definitely a good way to carry better bits for the Leatherman

Good steer ! Great idea !

amazing tools 🔧....

Looks like a fantastic solution for the weak flat drivers. I got mad using the ph#2 taking off door hinges to balance the door and the bit head slip every time. Change the bit for other Ph#2 and same problem, I couldn't tighten the screw. I had to go back to my truck and get the Wiha 76889 and take those 3D bits to complete the task. Is not bad the leatherman bits but I'm always afraid of broke those bits. Thanks, Sir to share this info. I will buy them and try if fit in the SwissTool bit the one with the wrench. 9-10 slots are more than enough to consider double ends.

I think I need this!

Gonna get these but looking for a small maybe magnetic holder or small case

Please let me know if there are longer shafts. Great video btw.

Ordered! Thanks

Great video! Thank you!

Thanks for this info.

loving it! good idea

Btw, not including state tax, Wiha has this kit currently for an additional $1.69. Which includes shipping cost, at least to my address. If you can't wait for Amazon, this might be an alternative buying solution.

You get a dedicated No1 and No2 Phillips in the LM kit as well.

Wiha makes a security bit kit as well (harder to find) and the philips in that kit has a flathead on the other side like a leatherman.

I just wish leatherman would develop a magnetic extension and great content as always Ben thanks

Excellent find! I always liked the idea of the leatherman bit kit, but never particularly liked the execution; the torx bits have all twisted on me, and the Phillips bits also leave more to be desired. I have other wiha products and I agree that they make quality bits. Thanks for sharing!

I had all of those but I found Chapman set and the Chapman set is a head above the leather Man tools

Any knowledge regarding the Chapman vs Wiha 1/4" bits, which are stronger?

Hi frend, would this double bit work for Victorinox SwissTool Plus? Will they fit into the leather case? Will they stick to the bit holder?

Any ideas on a good bit holder to carry these?

Duuuuuude i was just looking for something like this today!!!! Niiiceee!!!!

There are other options like the Wiha 77782 bit which features more allen (hex) bits or the 77780

To restate another comment I read here. Look at the other variations of the “reload kit” the one listed here in the video is great but I don’t have a use for half the bits. Another SKU of the same kind of reload kit had a better variety for my use.

Do you have a good storage solution for double-sided bits?

Any suggestions for how to carry these other than in a small zip-lock bag?

I wonder if these would fit in the bitvault?

great video Ben , unfortunately that link goes to a product no longer available .. hopefully they get released again

Do you know what other extensions/bit holders than can hold these wiha bits?

They are sold out. I was able to get them in sets of two bits on Amazon

A friend of mine ordered me a set of Snap-On hardened bits... I’ve tried everything from Wheeler to Lyman... there’s no comparison... the Snap-On bits are apparently Impact rated and I have yet to twist one or strip one out. Costly yes.. but amazing.

What are you using/doing for bit storage? would be interested in seeing your ideas on that aspect of this upgrade.. Great Vid as always

Hi. Is it compatible with Victorinox bit holder (from Victorinox multitools)?

There are different bit sets for the Wiha's Ultra Driver. I would definitely like to pick up one of the bit sets to go along with my Wave Plus. Quick question, how are you carrying the bits? I'd hate to just carry them loose or in a pouch.

But is there a container to store them though? I know wiha other products that green and red bit selectors that comes with containers to store them. Why not just get those instead? Only difference is they are not double sided.

What’s your favorite ratchet to use with the surge/wiha double sided bits?

Does it fit the leather man ratchet?

What's your carrying solution for these bits?

💚💚💚

How would this work with the Gerber arm bar or the Milwaukee six and one

Donde puedo comprar las puntas

Donde puedo comprar esto

Thanks for the tip. But do you know how I can carry all the bits. Does it fit in the Leatherman sleeve?

Are the torx just standard or security torx? My only complaint with the leatherman bits is I cannot find security torx.

Why didn't Leatherman put notch on the shank of their extension to keep it in the multitool? I think this is a glaring omission.

I would be tickled to simply find an adapter for my Rebar to add a bit set to it, without having to order anything on line...

How would the Wiha set work with Gerbert Center-Drive?

I notice that a lot of Indonesia are jumping on the multi-tool band wagon as of late, and producing some good quality products to be used with Leatherman etc. Security torcs are of interest to me, as you can use them on the LM's themselves. PS. How goes the Super-Surge rebuild?

How Are you carrying them?

Anyone using these bits with prestacycle or topeak ratchets? Thanks!

Compatible with ozark trail multiforce? Thx in advance

The link you posted was a dud

I have the Leatherman bit extension, I had difficulty getting the Wiha bit in, and now it won't come out!

Any ideas on how to carry this kit in the sheath ?

Nice, not so compact like the leatherman bits. Where do you put the loose wiha bits, in your pocket so you can lose them?

No longer available on amazon.

Yo quiero pagar en euros. Que tengo que hacer para pedir a Amazon

First and second comment btw 😂 if you wanna give something away pick me jeje 😏

If it needs the amount of torque that would damage the bits then you need to put your leatherman up and go get a screwdriver

Man they are sold out already!

They are still hustling the bit exchanger, but seem to have lost the ability to provide the bit set over at leatherface... they are on some BS! I understand discontinuing items from time to time, but they are a bunch of crybabies!

Just get a victorinox swiss tool and forget about all of that... 😉

At this point why not just get a proper screw driver set.

I DO NOT support communism!?!?