Woodturning - A Little Something Different

  Переглядів 7,185,900

Jack Mack Woodturning

2 роки тому

Welcome to this weeks woodturning video.
Woodturning - A Little Something Different
In this woodworking video I use a woodturning lathe to turn a slab of kiln dried oak into a small three legged stool for my son.
When woodturning a piece like i find it important to nibble away at it until I see what shape the wood wants to be, this is what is so enjoyable about woodturning. big log to bowl (little bowl) but i find removing the wood in layers allows me to find the best possible shape.
If you find these videos entertaining I’d appreciate you hitting the like button and if you'd like to see more from me, you can simply click the subscribe button.
Thanks.
My social media accounts:
Facebook - Jackmackwoodturning
instagram - jackmackwoodturning
#woodturning​​ #asmr #Naturaledge #pine​​ #woodturningprojects​​ #woodturninglathe​​ #woodlathe​​ #woodturningforbeginners #oak

КОМЕНТАРІ: 3 489
@Deleteitalready
@Deleteitalready 2 роки тому
Perfect. A bloke in his workshop making something and no music. Most enjoyable.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Much appreciated Jeff. Thanks for watching 😁👍🏻
@one8bravo785
@one8bravo785 2 роки тому
Refreshing isn’t it. Great work
@lewiswereb8994
@lewiswereb8994 2 роки тому
Even when there's music, it's not music.More like junk that can distort your concentration.
@johnbishop5316
@johnbishop5316 2 роки тому
How about the Doors, Break on Through to the Other Side? Which he shouldn't have done. How daft.
@louisgrissman4857
@louisgrissman4857 2 роки тому
@@johnbishop5316 John, please cope harder.
@yugiohsc
@yugiohsc 2 роки тому
I still can’t imagine turning a square without cutting off the corners first. Amazing
@nathandurrett8533
@nathandurrett8533 2 роки тому
I shouted NOOO! when I saw that!
@USCtrojanFootball1
@USCtrojanFootball1 2 роки тому
Same thought.
@billlaudon2681
@billlaudon2681 2 роки тому
For the life of me, I cannot grasp why folks ever do this. There are zero good reasons. Time? Much much quicker chopping corners off. In fact cutting, and even sanding to even more round I’d still way faster. Skill? Nah, no skills needed to work extremely unsafe. Easier? In no way is it easier bearing down on tool rest while feathering in tools just to stay away from the hospital. Please for the love of god!!! Someone give me a good reason.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
😂
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
I’v gone into depth on this topic a number of times so for this ones il keep it brief.. Bandsaws (the likely choice for that cut), take setting up for particular types of cuts.. Mine is set up for rip (long straight) cuts 90% of the time. My lathe which is the machine I use all day every day, about 60 hours per week is designed for making wooden things round.. For me it takes around 45 seconds to take this small piece of wood from square to round. It’s safe, efficient and is the best use of my time. When you consider that no matter what I did to prep this blank I’d still have to mount the piece on the lathe to true it up.. It makes no sense to do an action before that to save time unless that action took me less than say 30 seconds. Hope that helps. Thanks for watching 😁👍🏻
@myckalldeelaneey3459
@myckalldeelaneey3459 2 роки тому
Great video, best part.... no unpleasant music, just that great sound of woodworking.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Exactly! Music is far too subjective, you can listen to whatever you want while you watch. 👍🏻😉👍🏻
@sojibahmed9773
@sojibahmed9773 Рік тому
great
@bldallas
@bldallas 2 роки тому
In junior high and high school I absolutely LOVED woodworking. Took every class available,plus a self study to build a. Major project. The lathe was, by far, my favorite shop tool. I could turn things for hours. Great stuff.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Do you still get chance to do much turning now Bryan? Thanks for watching man 😁👍🏻
@bldallas
@bldallas 2 роки тому
@@JackMackWoodturning no, I haven’t done any in decades. It’s fun ti live vicariously thru you, here though.
@sojibahmed9773
@sojibahmed9773 Рік тому
wow
@user-ew5io6vl4x
@user-ew5io6vl4x 2 роки тому
Endlessly you can look at how water flows, fire burns and another person works))
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
😊😊👍🏻👍🏻🙌🙌👌🏻👌🏻
@trees5338
@trees5338 2 роки тому
I'm just a person who UKposts has directed to your channel, I have no skills with wood, but I do very much appreciate watching an expert at his craft. The darker wood for wedges was a nice touch. I would love to learn this skill, but at 66 and recovering from a broken wrist, I'll just stick to watching you videos. Thanks.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
How did you break your wrist T?
@trees5338
@trees5338 2 роки тому
@@JackMackWoodturning walking the dog, 5.15am, beautiful morning and admiring the star's, no breeze. Not paying attention to the dog, he dashed away, I held onto the lead. Got swung around, landed on wrist. Still holding on to lead. No one's fault, but carried on with walk, holding a torch in damaged hand, dog lead in other. Finished another 5km over dangerous terrain, then had to wait 2 hour's for the local a&e to open.
@user-zk8ux1oq9k
@user-zk8ux1oq9k Місяць тому
Great to see someone who shows that he really can turn by not using those xxx carbide tools continuously - and agree, no irritating, monotonous music.
@JackMackWoodturning
@JackMackWoodturning Місяць тому
Are there people calling themselves woodturners who use those awful things ?
@peterford9369
@peterford9369 2 роки тому
My son was in the orchestra and played base. I made him a stool once like that back about 20 years ago. Lathes are super cool tools. I used to make baseball bats for the kids. I made one 40 inches long once. Called it the Babe Ruth. Thanks.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
This is lovely. I love the face that we can make things for our kids. Thanks for watching 😊👍🏻
@cosmodetriti4440
@cosmodetriti4440 2 роки тому
OMG! I never thought to live long enough to see a woodturning video that was not a bowl or vase. Thanks a lot!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks Cosmo. If you liked the stool, I think you will love this one: ukposts.info/have/v-deo/h3OUZ52toYKWu6c.html Thanks for watching man 😁👍🏻
@cosmodetriti4440
@cosmodetriti4440 2 роки тому
@@JackMackWoodturning indeed I loved it. Thanks.
@tjgentry8296
@tjgentry8296 2 роки тому
Great job! It's almost hypnotizing watching someone woodwork. Just watching is what originally got me in to the craft/trade.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
I couldn’t agree more TJ. It is hypnotic isn’t it. Glad you liked it man. 😁👍🏻
@PetroicaRodinogaster264
@PetroicaRodinogaster264 Місяць тому
I cannot watch anything without doing something with my hands at the same time. But when I watch these videos, especially well made ones with no yapping and music, then I don’t need to do anything else… just enjoy it.
@JackMackWoodturning
@JackMackWoodturning Місяць тому
Glad to hear it P. Thanks for watching 😊👍🏻
@Bigvs.Dickvs
@Bigvs.Dickvs 2 роки тому
11:17 That's a good technique for wiping your stool!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
He he he 😂👍🏻😉
@PetroicaRodinogaster264
@PetroicaRodinogaster264 Місяць тому
I love it. As soon as you made the marks for the holes, i knew what it was going to be.
@wizdude
@wizdude 2 роки тому
I really loved the part where you used the wood shavings to smooth out and polish the legs. I’ve not seen that done before. It was really effective! Thanks for the great video 😀
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thank you. That process is referred to as burnishing. It can also be done with fine wire wool if the shaving are not suitable. I appreciate you watching.
@Dlogreen
@Dlogreen 2 роки тому
came here for this comment and the response. i assumed it was called burnishing, but wasn't sure if there might be a separate term due to the method. absolutely brilliant
@jamesheffington3931
@jamesheffington3931 2 роки тому
@@JackMackWoodturning so that is just a handful of the shavings from the pile? Or is it a mixture from several different pieces?
@timselves1
@timselves1 2 роки тому
My dad, who is approaching 86, used to do that all the time when using his lathe. Maybe an older skill. However, I learnt from my dad, so I do it as well.......
@mica4153
@mica4153 2 роки тому
I love the nice little details. Like making sure the wedges were perpendicular to the grain for strength. And the way you get that polish finish when turning!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Well spotted Chris. You know your wood. Thanks for watching man 😁👍🏻
@scaira60
@scaira60 2 роки тому
That is a very cool quartersaw white oak stool💪💪💪🪑🚪🪚🔨📐🇺🇸🙏👨🏻‍🦯👨🏻‍🦯
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Nice one Scott! 😁👍🏻😉
@jean-louishoules5198
@jean-louishoules5198 2 роки тому
Hi Jack, thank you to remember us that wood turning was first an utilitarian use. 😉👍
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
No problem Jean-Louis. Thanks for watching buddy 👍🏻😉
@mjremy2605
@mjremy2605 2 роки тому
Beautiful piece! A child's heirloom stool built by Dad. Nice to see it still being done. The video was very satisfying to watch. Thank you for no music. Don't waste oak trim. Cut off corners and use as pen blanks or with resin.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks for the kind words. I don’t make pens. I find them to be the most boring and simple things anyone could ever make on a lathe. It bores the arse off me just thinking about turning a pen. I don’t cut corners off one off pieces because iv been turning for more years than I care to say and iv learnt that “saving” little scraps of wood is utterly pointless and leads to a very messy workshop. Shavings on the other hand have so many uses. I do absolutely keep off cuts from nice wood, but I’d absolutely not ever turn two simple pipes to attach to a pre made pen body kit. I literally can’t think of anything less rewarding and more boring 😆
@ranaldh1
@ranaldh1 2 роки тому
Finally! A wood turner who concentrates on the imbalance of the piece, before the form!
@TheDellaniOakes
@TheDellaniOakes 2 роки тому
That looks like such a great footrest, or stool for a child. The oil really made the grain pop. Lovely.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
I made it for my son but he is outgrowing it already! I think I will buy a cow and use it for milking. 😂
@TheDellaniOakes
@TheDellaniOakes 2 роки тому
@@JackMackWoodturning There ya go! Always have a backup plan.
@Beariam24
@Beariam24 2 роки тому
4 bits of wood can make something so simple and elegant. 👌🏻
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
😊
@EgressMan2006
@EgressMan2006 2 роки тому
I learned more from your non-verbal video than I have from many verbal ones. You have amazing techniques. I love how you handle your lathe tools.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Much appreciated FKP. Glad you are enjoying the content. Thanks for watching 😁👍🏻
@AZMarine513
@AZMarine513 2 роки тому
I have done this. After I draw my target circle I cut the corners off in the bandsaw. Much faster and easier on the equipment.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
I’v gone into depth on this topic a number of times so for this ones il keep it brief.. Bandsaws (the likely choice for that cut) take setting up for particular types of cuts.. Mine is set up for rip (long straight) cuts 90% of the time. My lathe which is the machine I use all day every day, about 60hours per week is designed for making wooden things round.. For me it takes around 45 seconds to take this small piece of wood from square to round. It’s safe, efficient and is the best use of my time. When you consider that no matter what I did to prep this blank I’d still have to mount the piece on the lathe to true it up.. It makes no sense to do an action before that to save time unless that action took me less than say 30 seconds. Hope that helps
@neilanyon4792
@neilanyon4792 2 роки тому
@@JackMackWoodturning I have to admit I was thinking like Will, but your explanation makes perfect sense when you think about time. Great channel and inspirational work.
@qolbalt9289
@qolbalt9289 2 роки тому
@@JackMackWoodturning this brief explain a lot, thanks 😀
@tedhaubrich
@tedhaubrich 2 роки тому
If that way makes sense for your situation, great, but Ill continue to either spend 30 seconds on a band saw cutting the circle close (Im lucky enough to have a table saw for ripping, my band saw is for curves.) or at least cutting off the corners into a hexagon. Yes, it's an extra step, A. I hate interrupted cuts on the lathe, it just feels unpleasant. B. I like variety I'd rather do 2 steps for 5 minutes each than one for 10 minutes C. I really do not enjoy sharpening lathe tools. Not really a right or wrong just what works for a person.
@fiveoboy01
@fiveoboy01 2 роки тому
You can still cut the corners off with just any bandsaw blade no matter what it’s setup for. Just laziness and unsafe practices.
@user-mu8ov5yn8m
@user-mu8ov5yn8m Рік тому
Молодець! Навіть якось відчувається теплий запах дерева і тирси!
@JackMackWoodturning
@JackMackWoodturning Рік тому
That will be the future. Smellevision 🤣👍🏻
@comradetaco3003
@comradetaco3003 2 роки тому
Playback Speed 1x: Chill 😎 Playback Speed 2x: Intense 🤯
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Haha. Hope you enjoyed it CT. Thanks for watching 😉😊👍🏻
@p.f132
@p.f132 2 роки тому
I would have never dared turning down a square. Masterful work. Love it.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks PF. Glad you enjoyed it buddy 👍🏻😉
@MattyIce2214
@MattyIce2214 2 роки тому
Really nice! Picked up a wood lathe yesterday 2nd hand with a crap ton of tools. Also, I wish he would have turn all the wedges in the top of legs to where they are all pointing inward towards the center of stool. Would have added just that tiny extra custom touch of detail
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Cheers Matt.. lots of people say that about the wedges but if you were To put a wedge into a wood In any way other than perpendicular to the grain of the seat you risk splitting the top, worse still wood compresses when force is applied to side grain, meaning over time that joint would definitely fail. The extra touches of detail in wood working come from knowledge my friend.. not style over substance 🤙🏻
@batya7
@batya7 2 роки тому
Beautiful work, fabulous explanations to Qs in comments. May your son get much use & pleasure from the stool. Made with 🧡.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thank you JHF, that means a lot. 😊👍🏻
@MartinMMeiss-mj6li
@MartinMMeiss-mj6li 5 місяців тому
Nice stool. A design feature I like is to taper the legs from some point along their length down to where they touch the floor. This gives the stool a graceful look.
@s.z.493
@s.z.493 2 роки тому
Главное чтобы маленький заказчик был доволен! 🙂
@lucasneufeld2338
@lucasneufeld2338 2 роки тому
Fabricating made hand items for the little ones always brings such joy. Great video even better item for the little man
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
😍👍🏻
@executive
@executive Рік тому
I like the trick of burnishing the wood with the shavings
@cs_photoshoot1982
@cs_photoshoot1982 Рік тому
I didn't expect that he would turn square into round amazing 👍 ❣️🥰 Love from India 🇮🇳🥰❣️
@JackMackWoodturning
@JackMackWoodturning Рік тому
Much love from the UK 🇬🇧
@NightRunner417
@NightRunner417 2 роки тому
I love how this is really all just a virtual object in the worker's head, slowly coming out of thought and into the real world. I'm amazed at the precision just from freehanding. :-)
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks NR. Much appreciated. Glad you enjoyed it 😉👍🏻
@barrybakin3317
@barrybakin3317 2 роки тому
I am learning as much from your responses to comments as from the original video. Thank you for responding to comments with sincerity and patience!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks Barry, I try to most the time but sometimes I loose my cool a little. Where possible I try to share my years of experience with those who want to learn. Always happy to answer any questions you might have Thanks for watching 😊👍🏻
@MarsMan2482
@MarsMan2482 2 роки тому
I started the video to check it out... 12 minutes later and im still here. Good stuff
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Well, happy days.. glad you enjoyed it my friend
@SirDrakeNewcanon
@SirDrakeNewcanon 2 роки тому
Ahhhhh you made a "Luca széke"! Greetings from Hungary!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Hi Drake, I can only assume that translates to little stool? Thanks for watching 😁👍🏻
@kathyvick2710
@kathyvick2710 2 роки тому
I love watching sawdust fly, especially in slomo! It’s like snow without the cold! 😉
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
What a nice image. Sure there is an idea for a video in there somewhere 😉👍🏻
@BuckshotPA1
@BuckshotPA1 2 роки тому
Always amazing to see craftsmen creating art and functional pieces!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Cheers Buckshot. Glad you enjoyed it man ☺️👍🏻
@user-rr3ph3nj7t
@user-rr3ph3nj7t Місяць тому
Учите русский язык мы вас научим делать лучше этого дуралея. Шипов на видимой части изделия быть не должно.
@alienhazy
@alienhazy 2 роки тому
I can't even imagine the delicate touch and years of experience that you'd have to have to turn a piece that has holes in it without fucking it up. incredible video! thanks!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Haha nice one man. What is septic sauce? 😂
@jethrom8702
@jethrom8702 2 роки тому
Wow, a three legged stool. Amazing. How has mankind survived without this?. My life was incomplete. I'm soooo glad this was not a complete waste of time!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Awesome man me too. It would be awful if you had don’t something that was a waste of time. 3 legged stools are about the oldest piece of furniture going.. so there another thing you gained from this.. Happy days eh 😘
@fritzthecat2634
@fritzthecat2634 2 роки тому
This is exactly why I am interested in beginning wood turning, to be able to make things for my future grandkids. I figure if I start now I may at least have some idea of what I'm doing when they are born. My kids are only 16(son) and 14(girl) so hopefully I have plenty of time to learn. 😉
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Cheers Rick. I appreciate you watching. I love this comment.. it sounds to me like THE most perfect reason to get into wood turning. I can’t recommend it more as a hobby, you get instant results,, but the path of learning woodturing is a fascinating one too.. it’s very more’ish. In the next 10 years you could be a master at the craft. There’s no time like the present. Feel free to fire any questions at me as you start your journey. Enjoy 😊👍🏻
@meenusisodia9461
@meenusisodia9461 2 роки тому
0
@gdog9010
@gdog9010 2 роки тому
I subbed just because of this comment.
@chuckhembree6101
@chuckhembree6101 2 роки тому
Fickle, please listen up, you need to be VERY GLAD you will have grandkids because my only blood son went down that damn gay road. I wish you all the best sir, but please be grateful.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
It’s lovely to here your sons so happy Chuck. 😊
@itsmehere1
@itsmehere1 2 роки тому
2:20 this has to be one of the coolest sounds I've herd this week.
@salsamancer
@salsamancer 2 роки тому
Very nice, anyway fun to see somebody take raw material and make something with it. It's amazing how the varnish brings out the inherent beauty of the material in the end
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Much appreciated Nochtczar. Glad you enjoyed it. Thanks for watching 😁👍🏻
@christinemurray9407
@christinemurray9407 2 роки тому
UKposts ( our Pekingese in lots of snow ) is a delightful video Take care
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks C. Glad you enjoyed it 👍🏻☺️😉
@somethingelse4424
@somethingelse4424 2 роки тому
I can really feel the chips in my eyes. 3:08 points for the immersive experience.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Haha thanks SE. Make sure you always wear your safety glasses. Thanks for 😁👍🏻
@kuznec8444
@kuznec8444 2 роки тому
Углы дощечки можно отпилить а потом точить. Отличная работа 👍.
@user-ph5db2cb1r
@user-ph5db2cb1r 2 роки тому
Нужно. Автору повезло что дерево не порвало, резец не отлетел, руки и другие части тела остались целы.
@jbeni6642
@jbeni6642 2 роки тому
Gut, daß mal die Arbeit aus unterschiedlichen Perspektiven gezeigt wird. 👍
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Sorry I have no way of translating this
@Manatherindrell
@Manatherindrell 2 роки тому
You show a level of casual comfort with your machines that makes me fear for your safety.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Probs best not to watch my videos then ?
@Manatherindrell
@Manatherindrell 2 роки тому
@@JackMackWoodturning Why? It's not like you're going to post the one where you lose a hand.
@ralphhross
@ralphhross 2 роки тому
Great idea and design. I really liked how you used the ebony shims for decoration and strength. I will try this one out. Thank you.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks a lot Ralph, much appreciated, 😁👍🏻
@RandallHallKaizenReiki
@RandallHallKaizenReiki 2 роки тому
What a cute little table for a cute little kid.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
😊👍🏻
@user-vm8pv2bo7o
@user-vm8pv2bo7o 2 роки тому
Ну да мастерство не пропьешь... ... здоровья!!!!
@pellikan64
@pellikan64 2 роки тому
Nice seeing someone using more traditional lathe tools. Most videos these days are all about carbide cutters. I can’t remember the last time I saw a skew being used. (Although it’s one of my favorite tools) Well done
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Much appreciated Mark. Thanks for watching buddy 👍🏻😉😊
@theclockworkcadaver7025
@theclockworkcadaver7025 2 роки тому
I didn't know what I was signing up for when I clicked this video but I'm really glad I did. It was fascinating watching the piece come together and eventually figuring out what you were making! Really great work.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Nice one TCC. Glad you enjoyed it. Thanks for watching ☺️👍🏻
@epharston
@epharston 2 роки тому
Stool sample?! Seriously, love the work. And I echo the need for push sticks. Keep your fingers!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Hey Epharston, I do condone the use of push sticks and have used them in other video’s. I didn’t deem it necessary in this case. The angle makes it look more unsafe than it actually is. Thanks for watching 😁👍🏻
@user-fv6pu8qw6e
@user-fv6pu8qw6e Рік тому
Tank you my friend jacka 😘 ilvoe 💕and very good 👍 and very nice 👏 and Quality 👌 and clean
@JackMackWoodturning
@JackMackWoodturning Рік тому
😁
@MrofficialC
@MrofficialC 2 роки тому
I've never seen that sanding with the woods own shavings technique before that's pretty cool
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
That process is called burnishing, it can be done with fine wire wool or shavings from the same piece of wood. It has to be done after the correct sanding steps but In essence it gives the last polish/shine to the wood before applying finish.
@MrofficialC
@MrofficialC 2 роки тому
@@JackMackWoodturning that's very interesting! Thanks for the tip
@normancobbett2891
@normancobbett2891 2 роки тому
Very pleased to see you still have fingers .
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
👋🏻👍🏻😊
@luciusvorenus9445
@luciusvorenus9445 2 роки тому
Beautiful! It's amazing how a craftsman can look at some assorted wood and see a beautiful piece of furniture.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Cheers Michael. Glad you enjoyed it buddy 😉👍🏻
@captaindj9790
@captaindj9790 2 роки тому
I thought the video was complete, until I seen the sweet sweet baby. Congratulations! I did wood work toys for my children that they plan in handing down to their children (when they have some) I do counted cross stitching as well to keep the fingers working. I will still do wooden toys for when I do have grand babies, but until then, cross stitch’s for my adult kids👍🏼🙂
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thats great to hear DJ. No better feeling than building something for your family that you know will last many lifetimes. Thanks for watching 😁👍🏻
@esparka
@esparka 2 роки тому
The Arc of Promise at the end is a great visual, straight from God. Amen
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Peace be with you and good will to all men 🙏🙌👍🏻😁
@PipeDreamerJacques
@PipeDreamerJacques 2 роки тому
Beautiful! Next time you might point the wedges diagonally in toward the center so they are symmetrical.
@AlanLangford
@AlanLangford 2 роки тому
Seriously. All that work and just one detail missing.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
This would create a weak stool James. I built it to last. Thanks for watching 😁👍🏻
@madhattermd1
@madhattermd1 2 роки тому
@@JackMackWoodturning hello, not a wood worker here, how would that affect the strength of the chair? Grain structures not lining up?
@mikieswart
@mikieswart 2 роки тому
@@madhattermd1 you have to put the wedges in going perpendicular to the grain so it won’t force the grain apart over time there’s gotta be better words to describe it but i can’t word right now, too early
@Yoshikaable
@Yoshikaable 2 роки тому
@@mikieswart made sense to me!
@danbradley7176
@danbradley7176 2 роки тому
Beautiful result. Liked the thumbnail too, made me think "what could possibly go wrong"
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks Dan. Glad you enjoyed it 👍🏻😁
@bradgibson4459
@bradgibson4459 2 роки тому
Hopefully that will be a piece that will be passed down from generation to generation and also the skill set along the way!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Me too, I’m sure the stool will but I can’t say for sure my son will want to turn wood. It would be nice if he did 😊 Thanks for watching 😊👍🏻
@reetpateet8656
@reetpateet8656 2 роки тому
Absolutely brilliant - boy would I like a little workshop like that. Above all I’d like his skill to even do anything!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Nice one RP. Thanks for watching buddy 👍🏻😊😉
@maxinee1267
@maxinee1267 2 роки тому
That was very interesting to watch, thats a stool which will last a very long time. beautifully done. I would say you have mastered it.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks Maxine. That was the plan, hopefully my grandkids, grandkids, grandkids will sit on it one day. 😁👍🏻😉
@baturbaslar
@baturbaslar 2 роки тому
Great work and design that respects the natural beauty of the wood.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Nice one BB. I’m glad you think so. Thanks for watching 👍🏻😊
@bennywild1985
@bennywild1985 2 роки тому
My 6 year old daughter loved watching this haha.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
That’s awesome, all my kids will watch on UKposts is this ukposts.info/have/v-deo/pp6pl6qakKWK1Jc.html Thanks for watching guys 👍🏻
@rl2109
@rl2109 2 роки тому
Whew! After a rough start, it 'turned' out nice!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
What rough start ?
@rl2109
@rl2109 2 роки тому
@@JackMackWoodturning : Started off sounding like B-R-R-R-R-T before it rounded off and the sound smoothed out! Expert hands...! Fine result, too!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Oh the sound. Cheers bud. Glad you enjoyed watching
@rl2109
@rl2109 2 роки тому
@@JackMackWoodturning : Same here- glad I watched... Just subbed, and now I have some catching up to do! Keep doing what you love!
@anglerseawolf9919
@anglerseawolf9919 2 роки тому
Imagine going to a physician for an appointment with this. "Ok Doc, I brought you a stool sample".
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
😂😂
@wizdude
@wizdude 2 роки тому
Doctor: “your stool is so smooth and shiny” 😂
@JuanPabloakaJP
@JuanPabloakaJP 2 роки тому
😂😂😂
@HartyBiker
@HartyBiker 2 роки тому
Man that'd be a crap joke
@andiehammettz4u265
@andiehammettz4u265 2 роки тому
He'd say lay off the fiber.
@jessevennard2640
@jessevennard2640 2 роки тому
Nice work!! I don’t like to be critical but I have symmetry ocd and just wished the wedges all pointed either to center or horizontal to it. New subscriber. Keep it up
@strps-of2089
@strps-of2089 7 місяців тому
Exactly, why? why? 😫
@JackMackWoodturning
@JackMackWoodturning 7 місяців тому
Because each wedge is perpendicular to the grain of the wood, which is the correct way to make a wedges joint that will last a lifetime and more.
@Gkitchens1
@Gkitchens1 2 роки тому
The way that wood grain shines at opposite angles is mesmerizing.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks Gregory. Glad you enjoyed it. 😁👍🏻
@cathiwim
@cathiwim 2 роки тому
Thats called chatoyance if i remember correctly.
@StanWatt.
@StanWatt. 5 місяців тому
Certainly a level of ability to aspire to!
@steveharsant3859
@steveharsant3859 2 роки тому
Love the finished touch with the dark pieces for wedges, sets it off beautifully. Cheers from NZ👍
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks Steve, glad you enjoyed it man 👍🏻😉
@klausalan
@klausalan 2 роки тому
Inspiring little step stool! Can’t wait to try this on my own. Thanks for posting it.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
No problem Nick. Let me know how you get on. Thanks for watching 👍🏻😁
@jamesharrer9971
@jamesharrer9971 2 роки тому
There's that stool sample my Dr. wants!!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
He he he
@nkumar1
@nkumar1 2 роки тому
Aye its a baby stool! Amazing work.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Cheers. Thanks for watching 👍🏻
@saeedkaukab1791
@saeedkaukab1791 2 роки тому
WHAT A PERFECTION, CRAFTSMANSHIP !! 👌👌👍👍 WOW.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
😊👍🏻 thanks for watching
@gabrielp1306
@gabrielp1306 2 роки тому
As a machinist, this terrified me when I saw him put the chisel to the turning corners with his hand, big no-no when working with metal, especially with those corners so far out from the center. But I guess with wood it's fine, as this guy's hand isn't missing like it would be with metal. 😅
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Just as well it is oak and not steel 😁👍🏻😉
@neurotictim1
@neurotictim1 2 роки тому
No, it's not okay even though it's wood. Bad habits make for bad injuries.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
It’s not a bad habit matey. It’s a completely safe practice. Stick to what you know eh 👍🏻
@gabrielp1306
@gabrielp1306 2 роки тому
@@JackMackWoodturning yeah, I figured as much if you were doing it, it just scared me at first is all I'm saying
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
@@gabrielp1306 understandable mate. But I assure you it’s not dangerous, it is if you pop your finger in there but it goes with out saying that you don’t cross the line of the toolrest. Turning a square this size is not different than a circle of a larger size. Check out this video to see what I mean. ukposts.info/have/v-deo/rWZ2mJujaJiZqas.html Cheers 😊👍🏻
@sfeather7088
@sfeather7088 2 роки тому
Awesome Video.....No BS....No TECHNO Music.....Good Editing with no frills. LOVED IT :)
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Cheers buddy. You can come again 👍🏻😉
@kevinspencer6055
@kevinspencer6055 2 роки тому
The BS was the thumbnail
@sheldonwright2061
@sheldonwright2061 2 роки тому
Good looking stool. Wasn't what the thumb nail showed. Thought i might learn something new. Good looking stool none the less.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Glad you like the stool Sheldon, sorry you didn’t learn anything. Thanks for watching 😁👍🏻
@richie-rich3035
@richie-rich3035 2 роки тому
Your attention to detail is refreshing to watch. Thank you for your quality workmanship!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Cheers mate glad you enjoyed it
@jimclark2293
@jimclark2293 Рік тому
0
@jalexwheeler7751
@jalexwheeler7751 2 роки тому
I'd never thought of using the shavings as a final polish. Very interesting technique. I assume it transfers some of the oil, and also fills microcracks.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
I don’t believe it dose either. It simply buffs the surface. I have read a number of papers on the function of burnishing over the years. Many different options of how it works. But the same outcome can be achieved with fine wire wool so I’m sure there is no transfer of oil or filling going on. It is the same buffed surface you see when the bevel of a gouge has been pushed into wood during a cut.
@jalexwheeler7751
@jalexwheeler7751 2 роки тому
@@JackMackWoodturning Hrmm, when I use steel wool or an Emory cloth, I generally see tiny bits of material transfer. I think I will have to experiment with this method to see how it works. if only my shop wasn't already too full of projects. But then, without projects, I suppose I wouldn't need a shop.
@NikhilWolf
@NikhilWolf 2 роки тому
Where in the video is the technique you're referring to?
@jalexwheeler7751
@jalexwheeler7751 2 роки тому
@@NikhilWolf Near the end where he's using the sawdust/shavings to polish the workpiece.
@dannyroe5236
@dannyroe5236 2 роки тому
Quite the craftsman!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Cheers Danny. Much appreciated 👍🏻😊😉
@teejay6063
@teejay6063 2 роки тому
Cool! Jack ROOOOLS!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Haha thanks T. Glad you enjoyed it 🙏👍🏻👍🏻
@sandydee8003
@sandydee8003 2 роки тому
I so enjoy your channel. That finish you added by using the wood shavings I had no idea that was done. Oh, and thanks for not saying in the title what you’re making. I really enjoy figuring it out as you go. 👍
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Cheers Sandy. Much appreciated. Thanks for watching 😉👍🏻
@fiz1ne
@fiz1ne 2 роки тому
So glad we have woodturning as a class, so fun.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
That is amazing. My school had Design Tech but it mostly consisted of people standing over sinks, having competitions who could make the biggest ball of solder. 🤣
@fiz1ne
@fiz1ne 2 роки тому
@@JackMackWoodturning haha that's hilarious. Our school doesn't have much cool stuff going for it but we got a wood shop teacher that has 12 lathes and an alcohol addiction. He's an awesome guy, doesn't drink like he used to. Completely random 😂
@williamdavis5052
@williamdavis5052 5 місяців тому
Been turning 3 leg milk stools many years. Still picked up at least half a dozen good tips from this video. Plus the bowl gouge work is outstanding. How you handle the tool worth watching alone. Thanks
@sapphodesigns2377
@sapphodesigns2377 2 роки тому
I love the fact you turning the entire stool💯💯💯
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Nice one Sappho. What do you design?
@LeX-lc7ms
@LeX-lc7ms 2 роки тому
Отличная работа! Браво!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
👍🏻
@jimgardner5129
@jimgardner5129 2 роки тому
Absolutely lovely. An heirloom that should last generations. And here I thought you had cows to milk. :) (But that would typically be a one-legged stool.)
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks Jim, I appreciate you watching. 😊👍🏻
@bird1962
@bird1962 2 роки тому
hahaha...c'est ce que j'ai aussi pensé...cela s'appelle dans mon pays un botte-cul
@blueyedhillbilly7047
@blueyedhillbilly7047 Рік тому
aaaaaMMMMAAAAAAZZZZing! You are. Just saying. I watch your videos and am BLOWN away.
@JackMackWoodturning
@JackMackWoodturning Рік тому
Thanks B. Are you a woodturner?
@harrylake9388
@harrylake9388 2 роки тому
I can’t stop watching this stuff.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Well that’s good to hear! Glad you enjoyed it matey 😂👍🏻
@davidcolin6519
@davidcolin6519 2 роки тому
My father was a keen amateur wood turner when he was younger. He's now in his 90s so doesn't do it any more. the sound of the machinery and cutting still takes me back though. I do have one question though; Why did you take out the disc underneath only to then replace it with another? was this to stop the main disc from warping?
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
The part your are referring to is a recess, it’s used to hold the wood on the lathe via the “Chuck”, which is the silver part that the wood attaches to.. The recess is used to hold the wood while I work on the opposite face of the piece. Once it’s work is done it’s filled to avoid any sharp edges added on the finished piece. Thanks for watching 😊👍🏻
@user-ye6ev3mo5x
@user-ye6ev3mo5x 2 роки тому
Красиво при любви к процессу.. но слишком заморочено для детской табуретки.
@rhydsnow851
@rhydsnow851 2 роки тому
My grandad made stuff like this. Thanks for the video!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
No problem R. Thanks for watching 👍🏻😊😉
@Lou.B
@Lou.B 2 роки тому
Three legs never stood so proudly!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks Lou. Glad you enjoyed it buddy 👍🏻😊😉
@janefuzzy4816
@janefuzzy4816 2 роки тому
This would look great in our nursery.
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Thanks Jane. 🤔 😜
@chrisduitsman2918
@chrisduitsman2918 2 роки тому
Piece of hand made furniture that looks just amazing. Great job!
@JackMackWoodturning
@JackMackWoodturning 2 роки тому
Nice one Chris. Glad you enjoyed it. Thanks for watching 😁👍🏻
@stevemeredith9022
@stevemeredith9022 Рік тому
This takes me back to my first year as an apprentice carpenter & joiner when we had to produce several items to a very high standard that it on average took 1st year apprentices at least 6 months to be able to finish the items to a high enough quality to be able to learn how to finish all of the items ready for them to French Polished. It took me 6 months to get my items prepared properly to be able to polish them. I hated having to keep doing everything until it was perfect and I though the French Polisher was just giving me a hard time because he could.That is until I saw what the finishing & polishing did to everything I had made. I learned so much in those 6 months that my head ached but it has stayed with me for all these years.
@JackMackWoodturning
@JackMackWoodturning Рік тому
Have you made much stuff recently?