Woodturning that sells simple grain matched box in 6 easy steps. beginners wood turning

  Переглядів 177,749

Black Label woodworks

Black Label woodworks

3 місяці тому

Wood turning boxes is a fun project that is a great seller at craft and art shows. These boxes look great on a shelf but also are functional. In this video you will learn how i make a grain matched end grain box with these simple 6 steps.
www.blacklabelwoodworks.com/w...
Visit blacklabelwoodworks.com to see more of what I make.
I do interactive remote demos through Zoom for clubs and to the public. Visit my website to for more details and a schedule of upcoming pay per seat public demos.
www.blacklabelwoodworks.com/i...
There are risks involved with woodturning. My videos are only for entertainment purposes. If your not familiar with the turning techniques I use consult with an experienced instructor or mentor. Always use appropriate eye, face, and lung protection while woodturning.
As an Amazon Associate I earn from qualifying purchases.
Some of the tools I use in my shop.
Grizzly G0766 lathe amzn.to/3kiHBhX
Hurricane turning tools bowl gouges amzn.to/3CY32Mp
Hurricane turning tools skews amzn.to/2YrfkxQ
Nova Supernova 2 chuck amzn.to/3kmeoT8
Grizzly 17” bandsaw amzn.to/3qh1ee4
Wen slow speed grinder 8” amzn.to/3D0YfK6Turning birds mouth bowls is a great way to use all those small pieces of logs and branches. They are great practice without using expensive pieces of wood. You can literally go into your backyard and grab any decent size branch to use.

КОМЕНТАРІ: 79
@lauradowning691
@lauradowning691 25 днів тому
I love the lack of music and straight forward instructions, very informative. Thanks you!
@Mark_L
@Mark_L 2 місяці тому
Ok, that’s the way to start a video. No music, no stupid introductions, just get right into the reason why I clicked on your channel.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Thank you for watching.
@brennik05
@brennik05 2 місяці тому
I agree. I subscribed at the beginning of the video because of that format.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Thank you.
@dougdinan882
@dougdinan882 2 місяці тому
Like that you explain what you're doing.and no annoying music
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
thanks for watching
@paintilludrop
@paintilludrop 2 місяці тому
Agree! I love to watch many video's, and they lose me when music is annoying.
@anthonym.pacelli1960
@anthonym.pacelli1960 Місяць тому
Excellent video, to the point, down to work from the start, no unnecessary fillers and I actually learned something. Thanks for posting !👍👏
@BlackLabelwoodworks
@BlackLabelwoodworks Місяць тому
Glad you enjoyed it!
@jimmit77
@jimmit77 17 днів тому
This is a great method which I hope to attempt soon. I think thought, I'll keep my tool edge much further away from the chuck jaws in rotation.
@rockybosarge
@rockybosarge 2 місяці тому
I just bought a Record Power Herald Lathe and just starting to turn wood. Thank you for sharing your talent with newbies like me.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Your welcome thanks for taking the time to watch.
@ronaldcumpsty5605
@ronaldcumpsty5605 Місяць тому
I like to splt the top and bottom as you do. Then I turn the bottom , holding it on the bottom 1/2". Sand and finish in and out and friction polish it. Then I do the inside of the lid and friction fit the bottom to it and finish the bottom of the box. Then I return the lid to a sacrificial piece in the chuck and complete the grip knob, friction polishing this too.
@glencrandall7051
@glencrandall7051 2 місяці тому
Very nice little box. Very pretty wood. Well presented. Thank you for sharing. Have a great day and stay safe.🙂🙂
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Thanks, you too!
@paintilludrop
@paintilludrop 2 місяці тому
2/2024 .5 ❤..love no music, your skill is enough
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Thanks for watching.
@paintilludrop
@paintilludrop 18 днів тому
Watching again today! Made my first one..turned out ok.
@glennclarke9787
@glennclarke9787 2 місяці тому
Nice video. You say exactly what you doing. I will be watching more of your work 😊
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Awesome, thank you!
@dawnbigwarfe6871
@dawnbigwarfe6871 Місяць тому
Thanks for the step by step video. Really helped this newbie who just tried woodturning something like this yesterday and was frustrated to no end
@BlackLabelwoodworks
@BlackLabelwoodworks Місяць тому
Glad it helped!
@cdrive5757
@cdrive5757 Місяць тому
Why didn't you (Jam Chuck) finish the bottom of the box? Wakodahatchee Chris
@thedevilinthecircuit1414
@thedevilinthecircuit1414 20 днів тому
Probably done off camera; he demonstrates how to apply the finish, so off you go 😀
@clydeschuyler
@clydeschuyler 2 місяці тому
Beautiful piece.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Thank you! Cheers!
@montebailey4364
@montebailey4364 2 місяці тому
Ditto, "Ok, that's the way to start........
@lenshandcraftedwoodsigns6033
@lenshandcraftedwoodsigns6033 2 місяці тому
Looks great, I love making these.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Thank you! Cheers!
@jeffreyberndtson1456
@jeffreyberndtson1456 2 місяці тому
Nice project
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Thank you! Cheers!
@DougMilleratWoodSpunRound
@DougMilleratWoodSpunRound 2 місяці тому
Very nice!
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Thank you! Cheers!
@esmajor
@esmajor 23 дні тому
I love watching woodworking videos, these lathe vids are mesmerizing at times. A curious question I had though is, wouldn't it be better on the tools for the lathe if you had cut down the "square" shape of it first using a saw or is it just the satisfaction of beginning to end on the lathe? No hate I promise, just a curiosity.
@thedevilinthecircuit1414
@thedevilinthecircuit1414 20 днів тому
On small-diameter items like these, reducing a square to a 'rounder' shape is actually easier on the lathe. For larger pieces (6"-8" and up), it's less...adventurous...if you knock it down to an octagon or round shape before you start turning.
@gitaseldiy9525
@gitaseldiy9525 2 місяці тому
Good joob guys
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Thank you
@garyjohnson9297
@garyjohnson9297 2 місяці тому
Nice covered box Might want to sharpen your forstner bit and round over the bottom Moumt the bottom om a jamb chuck and turn in a foot and dome the bottom
@chipsteinberg5046
@chipsteinberg5046 19 днів тому
Great video, no frills just straight up good work. Nice piece. Is it spalted maple or birch or…?
@BlackLabelwoodworks
@BlackLabelwoodworks 18 днів тому
It's spalted maple thanks for watching
@user-bc6es1hj5t
@user-bc6es1hj5t 2 місяці тому
Why not turn off the scratch/cut what was still on the finished box?
@Chuck_Burke
@Chuck_Burke 12 днів тому
Nice video...thank you for your time in making it...and I agree about the intro :) On another note, after your applied your finish and parted the box off the lathe, how did you remove the nub on the bottom?
@BlackLabelwoodworks
@BlackLabelwoodworks 11 днів тому
Thanks for watching. I used a rotary tool and a 2 inch sanding disc. If you wanted you could make a jamb chuck to fit the opening and do it that way. I just find it easier with the rotary tool for small turnings.
@bobevans9955
@bobevans9955 Місяць тому
Kind of sound like Ray from everybody loves Raymond
@indianatone218
@indianatone218 Місяць тому
Nice job thanks for showing us this project . Ive liked and subd you ,Greetings from Wales UK
@BlairAshworth
@BlairAshworth 2 місяці тому
Great job. I looked for the link to the walnut oil/wax and sanding paste but couldn’t find it. Can you share what you used? Thanks.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Thank you. Here is the link to my finishes. www.blacklabelwoodworks.com/wax-and-sanding-pastes/ I currently only have the wax listed i need to make more of the sanding paste.
@Lmon1979
@Lmon1979 Місяць тому
What does a jar like that sell for
@BlackLabelwoodworks
@BlackLabelwoodworks Місяць тому
$15 to $25 for something small like this one.
@DennisDolan-fl3mw
@DennisDolan-fl3mw День тому
where's the link to the sanding paste?
@chuckandjanegoodguys2451
@chuckandjanegoodguys2451 2 місяці тому
Did you make the internal tool?
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Its a 3/8 curved boring bar from John Jordan woodturning. It comes unhandled so i turned one for it.
@joepeanut6827
@joepeanut6827 20 днів тому
There is no link to the Sanding paste.
@BlackLabelwoodworks
@BlackLabelwoodworks 11 днів тому
Sorry i sold out and currently in the process of moving to a new shop. Once I replenish my supply i will put the link back up.
@doncraft1910
@doncraft1910 2 місяці тому
No links.
@doncraft1910
@doncraft1910 2 місяці тому
Nice spalting.
@buglady1952
@buglady1952 19 днів тому
What type of wood is that?
@buglady1952
@buglady1952 19 днів тому
It's so beautiful!
@BlackLabelwoodworks
@BlackLabelwoodworks 18 днів тому
It's spalted maple.
@kenvasko2285
@kenvasko2285 2 місяці тому
What do you charge for a box like this? Nice video.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Most of these small boxes i get between $30 to $40 they take no more then 1/2 hour to make. Most of the time i am making them from left over bits and pieces.
@kenvasko2285
@kenvasko2285 2 місяці тому
@@BlackLabelwoodworks Priced right for a nice looking box. Nice job
@davidsmart8594
@davidsmart8594 21 день тому
@@BlackLabelwoodworks ? It’s $15-$25 in a previous response…
@ierbs7087
@ierbs7087 2 місяці тому
Great looking box, but did you not sand it more before finishing. There are still visible rings. Thanks for sharing your techniques, but yo let the piece down by not sanding it with higher grade papers.
@jeanlong4285
@jeanlong4285 2 місяці тому
I like the shape of the little box, but I think you should be sanding and finishing the inside.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Seems i missed mentioning in the video I spray all the insides of my boxes with sanding sealer.
@thedevilinthecircuit1414
@thedevilinthecircuit1414 20 днів тому
The shape is generally called a 'ginger jar'.
@pigeonmanof180
@pigeonmanof180 2 місяці тому
I like your straight forward style of teaching/talking. For me, the noise from the lathe and from tool-on-wood is as loud or louder than your voice. I can barely make out what you’re saying when you talk while working. You can do better, judging from other turners videos. In all other respects very enjoyable and informative and you could be one of my regularly watched content producers. Maybe a little more light directed on the work area?
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
Thank you. Sorry about the bad audio i was trying a new mic and didn't realize it was picking up my lathe noise until i was done recording.
@dangrosnick5329
@dangrosnick5329 2 місяці тому
Why did you round your skew ? It also look uneven on the edge.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 місяці тому
The grind on the skew is similar to what Alan Lacer uses it makes it a little easier to control.
@artlee7415
@artlee7415 2 місяці тому
Nice design for a box but i cant see anybody buying it with the condition you left it in. The tool marks, that gash on the side, tearout inside the lid and on the tenon for the lid. Sorry to be be so critical. Other than that you put out a nice video.
@sbeckwith7801
@sbeckwith7801 2 місяці тому
Good work, but I shall not return to a channel that has commercials every 4-1/2 minutes. Tell UKposts to Back Off.
@paintilludrop
@paintilludrop Місяць тому
3/2024 ..did not see one commercial. Maybe after a certain number views..they stop.
@papaduck459
@papaduck459 Місяць тому
Don't be cheap and get premium UKposts with no ads, and stop blaming the channels.
@raganca4313
@raganca4313 Місяць тому
Yeah because some blue collar wood worker has the power to tell the multi billion dollar UKposts platform where and when they are allowed to put commercials
@darrenreid4634
@darrenreid4634 27 днів тому
Obviously you don't have premium. If you don't stop wringing about ads.
@lonniehanson3079
@lonniehanson3079 Місяць тому
Way too much dead time just looking at piece
Woodturning boxes with finials 5 easy steps wood turning for beginners
29:28
Black Label woodworks
Переглядів 5 тис.
Woodturning - There's Hidden Magic in this Wood!
13:41
Harry Smith
Переглядів 538 тис.
GADGETS VS HACKS || Random Useful Tools For your child #hacks #gadgets
00:35
"Поховали поруч": у Луцьку попрощались із ДВОМА Героями 🕯🥀 #герої #втрати
00:15
Телеканал Конкурент TV - новини Луцька та Волині
Переглядів 196 тис.
Lidded Boxes and a new Hollowing Tool
15:28
Peter Woodbine
Переглядів 43 тис.
Every beginner needs to hear this
11:10
Lincoln St. Woodworks
Переглядів 1,2 млн
beginners woodturning How to turn your first bowl
18:24
Black Label woodworks
Переглядів 56 тис.
woodturning green branches in 5 easy steps with the pith
19:01
Black Label woodworks
Переглядів 10 тис.
Richard Raffan - your first go on a wood lathe.
19:39
Richard Raffan
Переглядів 59 тис.
QUICK AND SIMPLE BOX , done under 30min, great beginner project that sells fast....🤗
11:26
Tomislav Tomasic Woodturning (Dodir Drva)
Переглядів 55 тис.
Understanding Woodturning Catches
12:11
FineWoodworking
Переглядів 1,5 млн
No way, IMPOSIBLE ??? ____ OR IS IT???
27:12
Tomislav Tomasic Woodturning (Dodir Drva)
Переглядів 22 тис.
How to hollow endgrain and make awsome box
36:25
Tomislav Tomasic Woodturning (Dodir Drva)
Переглядів 24 тис.
GADGETS VS HACKS || Random Useful Tools For your child #hacks #gadgets
00:35