Thanks Turned. Glad you are enjoying it. 😁👍🏻

Cannot unhear.. Thanks for that.

Qqqqqwaaássdgg

@@JackMackWoodturning ,,,,,,,,,,,,,zz,z,,,,,,,,,,z,zz,,,,,zz,zz,,,,z,z,,,

@@JackMackWoodturning ,,z,z,

🤣🤣🤣 it’s all about the journey of discovery my friend. Thanks for watching. Glad you enjoyed it. Have you watched my other videos? I think there are a good few you’ll enjoy 😊

You are not a fool if you can change your mind.

@@Comrade_Joric legendary take

It takes a man of great integrity and character to admit when he’s wrong. I admire you. Thank you.

Grain pattern my friend. Or making sided bowls

Thanks Jed I appreciate that. I’m glad that you find something unique and inspiring in my work. That’s what it’s all about. 👍🏻👍🏻👍🏻

Also... thank you for the sub.. means a lot 🤙🏻

Good luck on your new craft sir...I hope you find much enjoyment out of it

Thanks A, is that a wormhole?

@@JackMackWoodturning yeah it is, it looked really cool. And no problem acknowledging people with skill and talent makes my day

Nice one man. Yeah I have always found the concept of black holes really interesting. The images of them now are mind blowing 🤯

@@JackMackWoodturning yup! And we dunno much of what is inside them

EVERYTHING! 😂

Much appreciated Diluted. Thanks for watching 😉👍🏻

If you are making this from seasoned wood of ply wood you can leave the bottom thick and the walls thin, leave the bottom round and it will spin, wobble ever so slightly but stay fully up right regardless of how you fill it 👍🏻

ukposts.info/have/v-deo/sJl_dZqrmJBqonU.html

Thanks terry. Really glad you enjoyed it 😊👍🏻

the silence is perfect, please don't narrate

Just as well it was a wall and not a person! 😁👍🏻

Being new to turning I would love to know what was wrong in your opinion with the start. Beautiful job, a real inspiration. I’m following now.

Hi Jim, as I beginner I’d recommend you don’t try to emulate my practices and instead learn the basics first. For example people have an issue with me starting this project with a square piece of wood and using the lathe rather than the bandsaw to make it round. Iv been turning wood as my profession for many years. The way I work is safe for me as I know the potential hazards and understanding how to avoid them. Woodturning os complex by nature and understanding the basics first is essential. That being said, if I was only making videos that could be copied directly by a beginner my channel would not be anywhere near as interesting. Please don’t use my videos as information, they are not intended that way which is why I don’t narrate them or at any time instruct others to do anything. If you have any questions regarding woodturning I’m always more than happy to advise. Cheers Jack.

Back in Jr high I had mostly finished a bowl I'd spent the entire quarter on, was just putting it on the lathe for some final sanding -- but someone had left the lathe at full speed when they powered it off and my bowl rapidly hit an RPM that shattered it into dozens of pieces. Found some of it 40 feet away. Kind of a shame. Also, potentially fatal but I lucked out.

Thanks D. Glad you enjoyed it buddy 😊👍🏻🙏

Happy accidents with the shutters speed and lathe rpm. It does deliver some very interesting visual effects at times though. Thanks for watching man 😁👍🏻

ukposts.info/have/v-deo/sJl_dZqrmJBqonU.html

👨🏻‍🌾

He’s got tegridy 😂

It did sound like an old John Deere

😂😂

😂😂😂😂Correct exactly

Awesome, cheers Mary, glad you enjoyed it 😊

Yeah a couple people said that too. I agree, it was a nice shape. But I had set out to make a wobble bowl so felt it was right to see it through. It’s all good though as there is always the next piece where I can try out new/different things. Thanks for watching and following along. I appreciate it. 👍🏻

@@JackMackWoodturning Perfection 💯

ㅅ느

I think you should have left it alone and not cut the bottom part off and that's just my opinion but other than that the turning and the quality of the craftsmanship looks just marvelous. I commend you Highly on your work turning looks wonderful. God bless you my friend and as always Amen

Nice one S. Glad you enjoyed it 😊👍🏻

4 hours! That’s good going. You must be a master woodturner by now 😂😉

@@JackMackWoodturning no still trying to draw that circle. I really dig this though. So awesome and genius.-G

Nice one Chris. Got some more similar vids coming soon 😊👍🏻

Thanks R. A perch for your bird?

Thanks a lot Brandon. Glad you enjoyed it 👍🏻😁

Thanks again Bettie. You might like my shorts channel. ‘JM Woodturning shorts’. More of the same as this channel but 2 mins long. I have a new vid dropping every other day for quite a while on there. Thanks for watching 😁👍🏻

😆👍🏻

No probs S. Thanks for watching. Where are you watching from?

@@JackMackWoodturning Gilroy California (south of San Jose)

Nice one Rich. Glad you enjoyed it buddy 👍🏻😉

Thanks a lot Bob. Much appreciated. Thanks for watching 😊👍🏻

Thanks G. Glad you enjoyed it 😊👍🏻

😆

Nice one Will. Thanks for watching man 😊👍🏻

Cheers David, aye I wasn’t in a rush to find out.. Knuckle busters. Thanks for watching. 👍🏻

There is no time like the present! ☺️👍🏻😉

Magic 🪄

Nice one Cat. Much appreciated. Thanks for watching 😁👍🏻

Nice one Keith. Much appreciated mate 😉👍🏻

Thanks Jesus. I don’t think I want to see that video 😂

First thing you should consider is a vacuum machine to suck away the dust (like you see in the video). Then, big and good lathes have a rail on the height of your knees which kill the power in case you get dragged towards the machine. Most important is a faceshield and not working with longsleeve clothings, bracelets, chains around your neck or hoodie strings hanging down your shoulders. Turning is relaxing, focusing and satisfying (y) - go for it!

Haha glad you enjoyed it Ed 👍🏻😉

Thanks. I’m glad you enjoyed it 😊👍🏻

Thanks for watching Lois, I’m glad you enjoyed it. 😊👍🏻

Nice one Chris. Much appreciated buddy 👍🏻😉

🤣👍🏻

Thanks for sharing your opinion too mark. Cheers for watching buddy 😊👍🏻

What other system is there? 😂

Thanks Mary. It’s fairly easy really, you just don’t put your hands on the spinning bit 😉

Thank you for watching Joyce. I appreciate you following along and I’m glad you enjoyed it. 😊👍🏻

👍

Thanks Amanda. I did enjoy making this one. I think I may take it back to basics with Fridays vid 😊👍🏻😉

@@JackMackWoodturning I like what ever you make

Hey T. Glad I can bring you some nostalgia, I reckon you will like my latest vid. Some prizes that could be right up your street! ukposts.info/have/v-deo/cXNhpZWNg5CjyZc.html

Thanks F. Much appreciated 😊👍🏻🙏

Thanks jules. I appreciate you watching 😊👍🏻

@@JackMackWoodturning ppppppplplpllll

@@JackMackWoodturning ok lplpllpll

Thanks Margaret, glad you enjoyed it. 👍🏻

Thanks for watching 👍🏻

Thanks 😊

Thanks Tracey, I set out to make a wobble bowl but I did think the foot was nice, I plan to make another at some point soon with the foot left on. I hope you enjoy that one too. Thanks for watching 👍🏻

@@JackMackWoodturning always. I’ll be waiting. Love your work.

Haha pure luck would have been good but no I actually knew exactly what I was making when I started. 😊

Thanks buddy, glad you enjoyed it. Are you a grower?

Cheers Colin, I’m glad you enjoyed it. Thanks for watching and following along with my channel. Much appreciated 👍🏻

Thank you Shevill, I appreciate you watching. Thanks for following along with my little channel 👍🏻👍🏻

👍👍

Nice one Sahsuh. Glad you enjoyed it 😁👍🏻

Glad you like it man, I appreciate you watching. 👍🏻

Hey Kev. Glad you enjoyed it buddy. Thanks for watching ☺️👍🏻😉

😊

Thank you. So glad you enjoyed it 😊👍🏻

Iv been woodturning for along time now and have only had one bed accident. It’s on my video called “exploding bowl” you can watch it and learn what happens when one becomes complacent while operating machines. The aim is to always avoid accidents, that is done by knowing your limitations as you learn and build experience while maintaining a healthy fear of the dangers. I have to add, the work should never fly out and the tool should definitely not fly across the room. If this happens even once while your woodTuring you desperately need to stop, slow down and learn the very very basics of work holding and how to present a cutting edge to the wood. Appreciate you watching mate

Thanks F. Much appreciated 😉👍🏻

😆 cheers dude 🤙🏻

Cheers Mr. Mack.. nice to have you along for the journey. 😊👍🏻

Thank you. Glad you enjoyed it. Cheers for following along 👍🏻

Ys

Cheers George. Appreciate you watching, Glad you enjoyed it 😊👍🏻

I'm sad as well

Thanks for watching Scott, the ply actually turned relatively well, it was not as pleasant as turning greenwood or solid wood of course but no where near as bad as the resin projects iv done. I have some zebrano, I think il be using it in a video very soon 😊 I appreciate you following along 👍🏻

Lathe RPM ratio to camera frame rate buddy. If they are the same the piece appears to stop moving. 👍🏻😊😉

Nice one Mark. A few more of these in store 😊👍🏻

Now wouldn’t that be something? If we travelled at warp speed for the duration of the video, I wonder if we would encounter aliens. Do you think they would be woodturners?

No problem Mahesh. Glad you enjoyed it 👍🏻😉🙏

Cheers Robbie, exactly what I was going for 😊. I’m glad you enjoyed it 👍🏻👍🏻Thanks for watching

Cheers, thank for watching 😊👍🏻

Thanks for following along Wanda, I appreciate you watching my videos. 😊👍🏻

😎

Thanks. Would you have it in your home?

I certainly wood.

Hey grumpy, glad I could make you smile dude. Happy days. Cheers for watching 🤙🏻

👍

It’s great isn’t it 😊👍🏻

Don’t you like music?

Thank you. I appreciate you following along 👍🏻

Thanks a lot Lisa! Glad you enjoyed it 😁👍🏻

Thanks DG. Glad you enjoyed it 👍🏻😊

Cheers Rebecca. 😊👍🏻

Ok

Thanks Japie, I appreciate you following along 🤙🏻

👍

I’m sure you’ll be fine. Just wear a face shield and make sure you have a good hold. 👍🏻😊