World's Smallest V8 Engine Hits 10,500 RPM on Nitro (1.7 Cu In 28cc)

  Переглядів 2,620,801

Warped Perception

Warped Perception

День тому

The Run the Smallest V8 RC Engine in the World in at 28cc's and try to hit the maximum rpm.
I first set up the Mini V8 engine, then I open it up to show everybody what's inside, take a look at the bearings the valves the cam.
I then run this engine at full throttle after that I make some exhaust modifications to try to get a better more realistic sound, then I film the engine in slow motion to show everyone how the valve train works with the cams rocker arms and lifter buckets.
About the engine: this is the new Miniature V8 Nitro Engine Toyan / Howan 28cc 2.7 Cubic inch V8 Engine sold by Engine DIY, it's a brand new product that will be released in June.
Here's links to the engine:
Extra 10% Off Coupon Code: Warped
TOYAN V8 Engine ➜ bit.ly/3sGLdOZ
TOYAN V8 Starter Kit ➜ bit.ly/3MpA2SJ
TOYAN V8 Other Accessories ➜ bit.ly/3FSXBAK
TOYAN Rotary Engines ➜ bit.ly/3sH92pW
Other TOYAN Engine & Parts ➜ bit.ly/3yH5lV1
Other V8 Engines ➜ bit.ly/3sCNKK3
Chapters
0:00 Intro
0:49 Opening Engine
2:50 1st Start-up
4:23 Start-up w/mods
5:27 Max RPM Run
6:53 Run No Headers
8:08 Slow Motion Run
↓↓Social media Links↓↓
🐦 ► Twitter: / warpperception
👍 ► Facebook: / warpperception
◙ ► Instagram: / warped.perception
☢ ► IMDB: www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka

КОМЕНТАРІ: 1 800
@hugostiglitz6914
@hugostiglitz6914 Рік тому
Wow, a drill the size of a V8. That's impressive!
@davkdavk
@davkdavk Рік тому
Hahaha
@paulgonzalez2985
@paulgonzalez2985 Рік тому
Lol took me a minute but i got it i got it
@z0mb13k1ll2012
@z0mb13k1ll2012 Рік тому
I don't understand why he would use a giant m18 drill for this. There are some very nice m12 tools or tools from other brands as well that are waaay better suited to working on smaller stuff
@braydenvandyke7349
@braydenvandyke7349 Рік тому
He is also a giant
@Suchapill
@Suchapill Рік тому
So impressive especially last phaZe when u opened her up she screamed like the real deal.
@sled_neckx9972
@sled_neckx9972 Рік тому
You should try to put a bigger flywheel on it so you can turn the idle down and make it lope.
@type2523
@type2523 Рік тому
It won’t turn the idle down , it will just make it accelerate slower but have more momentum when starting to move
@volvo09
@volvo09 Рік тому
@@type2523 the flywheel itself won't lower the idle, but the added mass makes it less likely to stall at low rpm.
@SamSamuylik
@SamSamuylik Рік тому
I agree, it just spins up and slows down too fast...doesn't sound right
@danielbarrett6960
@danielbarrett6960 Рік тому
@Don't Read My Profile Photo ok I wont
@zqzj
@zqzj Рік тому
100% bad idea. High revving engines aren't designed for heavy flywheels.
@JRexRegis
@JRexRegis Рік тому
I love that V8 engines are so monstrous that even a miniature version sounds menacing.
@allenleroy9109
@allenleroy9109 Рік тому
Lawnmower are louder and have a smaller engine.
@nick0164
@nick0164 Рік тому
@@allenleroy9109 loud doesnt mean it sounds good or menacing
@allenleroy9109
@allenleroy9109 Рік тому
@@nick0164 mines sounds pretty menacing..
@nick0164
@nick0164 Рік тому
@@allenleroy9109 true. the sound of 5 blades spinning thousands of times a minute is very terrifying
@lennartsix6102
@lennartsix6102 11 місяців тому
​@@allenleroy9109 actually they dont. This engine has 28cc of displacement and most lawn mowers have around 70
@ComeJesusChrist
@ComeJesusChrist Рік тому
That’s so much air in the cooling system! Cool little engine, I’d love to have an RC car with this engine.
@davecrupel2817
@davecrupel2817 Рік тому
That thing would fvcking *scream* with this engine in it!
@EAGLINWRX
@EAGLINWRX Рік тому
@@davecrupel2817 it would also run out of fuel in a minute
@hxhdfjifzirstc894
@hxhdfjifzirstc894 Рік тому
The coolant line fittings are letting air in constantly. There's no way to bleed the air out if the fittings let air in.
@wparsons
@wparsons Рік тому
@@davecrupel2817 the power output to weight of this is pretty bad. It makes about 4.3hp, a good competition 3.5cc 2 stroke makes 2.5hp+ weighing a fraction as much, and a decent 28cc 2 stroke gas engine will make over 5hp easily. This is definitely cool, but it won't make a car fast at all.
@ManicMechanic82
@ManicMechanic82 Рік тому
@@EAGLINWRX Or less! The fuel tank would have to be much larger and weigh more than the rest of the entire RC vehicle altogether! But then again this is an extremely high RPM! You would need some type of two or maybe even three speed automatic transmission to be feasible!
@LifenSantaBarbara
@LifenSantaBarbara Рік тому
Can't wait to see a supercharger on it!
@WarpedPerception
@WarpedPerception Рік тому
Hahaha... You know me well enough that's for sure
@zaidkabouk9264
@zaidkabouk9264 Рік тому
@@WarpedPerception I think I see something with double supercharge already blown away 🤫🤫
@gen1c8rs88
@gen1c8rs88 Рік тому
@@WarpedPerception Why wasn't the air filter removed ?
@vaz1677
@vaz1677 Рік тому
Cant wait to see It on a RC car
@shelbygtman
@shelbygtman Рік тому
Damn it, you beat me too it!!!! I thought the same thing about supercharging it ha ha!!!!
@ashiehakoto1490
@ashiehakoto1490 Рік тому
it sure sounds like a V8, and tbh I love that. when a miniature engine not only looks like and is built exact to scale of it's full size counterpart, and also sounds like its full size counterpart, it makes the gearhead in me grin like a giddy child
@nitroboom1282
@nitroboom1282 Рік тому
There is a dedicated roots style blower kit for this engine so please try it out!
@JoaoZagoSJC
@JoaoZagoSJC Рік тому
Man, Internal Combustion engines are so cool. Thank you for bringing this to us.
@crazyheadgideon
@crazyheadgideon Рік тому
For temp issue, you should bleed the cooling system better. Too much bubbles in the lines. At least is the first thing I thought. Engine could use some air too, listening to it.😊👊🏻
@volvo09
@volvo09 Рік тому
He had it setup in a self bleeding way. I believe air is getting in internally, from a seal or something.
@motographics
@motographics Рік тому
That's not the main issue at all here...The reason for all the heat in the block is...is he let it run at absolute max throttle knocking its nuts off for a prolonged time till the fuel tank was completely empty, did not let it idle at all. The result is that the water pump is driven by the belt on the front, no engine RPM = NO coolant flow! hence the lines being hot close to the engine. completely the wrong way to look after an engine.
@brandonbrown3600
@brandonbrown3600 Рік тому
@@motographics The engine can't cool with air in the system. The engine at max ROM should be flowing like hell with coolant but it wasnt. Either there is air in the system or it's cavitating or both. High RPM does not matter the cooling system should be able to keep up just like any other engine in a car etc. If it can its poorly design or has issues.
@3point1415926536
@3point1415926536 Рік тому
It looks like the source of the 50:50 air:coolant going into the engine is the hose exiting the overflow tank close to the water level. It's not really an overflow tank if it's directly within the path of the circulating coolant...
@allentoyokawa9068
@allentoyokawa9068 Рік тому
It is a chinese branded product, don't expect much
@SawyerKnight
@SawyerKnight Рік тому
The internal combustion engine is still mankind's crowning achievement when it comes to mechanical engineering.
@JRexRegis
@JRexRegis Рік тому
This! The crankshaft moved by pistons alone is such a weird concept, especially with the way the pistons move asynchronously. From a first glance, it doesn't look like it should work as it does, it's so counter-intuitive. And we perfected these things to the degree that they can be mass produced.
@Whateverpoopiepants
@Whateverpoopiepants Рік тому
Personally love engines but no . The large hadron collider .
@hugostiglitz6914
@hugostiglitz6914 Рік тому
The Hubble Space telescope.
@backwoodsjunkie08
@backwoodsjunkie08 Рік тому
@@hugostiglitz6914 hopefully now to be the JWT!!
@hugostiglitz6914
@hugostiglitz6914 Рік тому
@@backwoodsjunkie08 Yes, its had a bit of a ding from a micrometeoroid. Hopefully that can be sorted out!
@SupraSav
@SupraSav Рік тому
Probably a little too small, but making an exhaust for that would have been cool.
@michaelb.42112
@michaelb.42112 Рік тому
0:12 is just pure joy !!!!!
@bikerleo1966
@bikerleo1966 Рік тому
Now I want to see a mini supercharger on that ! The air bubbles in the coolant lines looks bad maybe increase the size of the water journals.
@mickmuzzmkmz1628
@mickmuzzmkmz1628 Рік тому
He'll probably make his own before the factory releases theirs, which apparently they will do, along with actual double over-head camshafts.
@maxpower700
@maxpower700 Рік тому
It is possible to get less airlock stock. Check jhonnyq90s video, very little bubbling👌
@madmaxfarms7980
@madmaxfarms7980 Рік тому
Yeah I was thinking the same thing
@cenreaper3221
@cenreaper3221 Рік тому
@@mickmuzzmkmz1628 That engine actually don't have four camshafts. Just two
@mickmuzzmkmz1628
@mickmuzzmkmz1628 Рік тому
@@cenreaper3221 Maybe you misinterpreted my comment, but I never said this engine was double over-head cam, I said it was a possible future improvement for this engine, by Toyan themselves, while answering FAQs. They mentioned possibly supercharging it, making a petrol version, and making it an actual DOHC.
@blk77sunshn
@blk77sunshn Рік тому
That was soooo cooool !!!!!!! I love these scaled-down engines, they're just mesmerizing to watch! Thanks for the great video!
@boysinhonolulublue5956
@boysinhonolulublue5956 Рік тому
These is a perfect engine to teach kids how to work on engines so cool
@biggerchris20
@biggerchris20 Рік тому
Hell it sounded like a proper v8 before the muffler cut. Deep throaty sound, and amazing when you hit the throttle. With everything removed sound like an RC boat.
@DaveFromColorado
@DaveFromColorado Рік тому
I found the disassembly when JohnnyQ90 did it on his channel. But I enjoyed the slow-motion and exhaust modification that you had done, making it much more fun to watch.
@WarpedPerception
@WarpedPerception Рік тому
I also disassembled it here, me and Johnny both received prototype engines, and we are both told not to remove the heads. I actually had it before Johnny but I had a previous commitment so he got to release it first.
@DaveFromColorado
@DaveFromColorado Рік тому
@@WarpedPerception I personally like the slow-motion video of the valve train much better.
@JoelCreates
@JoelCreates Рік тому
I'm trying to decide which small item makes the most sense to power with this
@WarpedPerception
@WarpedPerception Рік тому
I'm not sure what the HP output is I think they said 4.3 HP.
@BearBig70
@BearBig70 Рік тому
I think I'll get one for the kitchen, and run everything off of a long shaft running through the kitchen like the Germans ran their machine shops in WWII. Belt drive for the blender, the mixer, the meat grinder.... She'll really like that. 🤫I think😜
@WarpedPerception
@WarpedPerception Рік тому
@@BearBig70 that would be awesome and funny as hell
@01DOGG01
@01DOGG01 Рік тому
@@WarpedPerception I don't really understand engines. I just watch videos. But how would its torque rating affect that? My lawnmower is like 2 or 3HP. What would happen if this thing had to cut grass? I imagine that it would just cut out as there's 0 weight behind keeping it moving.
@WarpedPerception
@WarpedPerception Рік тому
That's a great question, I think the same things sometimes because they're so small but this one is supposed to be 4.5 horsepower, I absolutely have to test that in an upcoming video
@mr8610
@mr8610 Рік тому
Man, the slowmo beat was sick!
@WarpedPerception
@WarpedPerception Рік тому
Thank you
@jeffboyer8214
@jeffboyer8214 Рік тому
That is definitely nice & detailed. Be safe.
@rotax636nut5
@rotax636nut5 Рік тому
Now that's what I'm talking about! try leaning out the mixture another great show, keep 'em comin'
@DrunkardTV
@DrunkardTV Рік тому
Man this is such a cool channel! Love what you're doing!
@raven4k998
@raven4k998 Рік тому
imagine powering your car with that thing🤣🤣🤣🤣🤣
@tonygallo8570
@tonygallo8570 Рік тому
It is absolutely amazing with the technology of today what can be done in engines especially for hobby shops they've come such a long way
@therandomman6647
@therandomman6647 10 місяців тому
Finally! something to do during winter.
@backwoodsjunkie08
@backwoodsjunkie08 Рік тому
I'm a big RC plane dude and I would absolutely love to see this in something like a scale Spitfire, P-40 Warhawk or Mustang! That would just be absolutely incredible! I know that a lot of those planes in real life were either radial engines or straights but this would look absolutely amazing and an RC aircraft!
@vipervidsgamingplus5723
@vipervidsgamingplus5723 Рік тому
@John Connor I think that is theoretical and not literal.
@brandonbrown3600
@brandonbrown3600 Рік тому
@John Connor lol it likely needs the carbs tuned to get running better. The smaller engines work well in RCs no reason this won't as well.
@ericperlot757
@ericperlot757 Рік тому
Totally dude! I was thinking the same thing about the WWII model aircraft. I was thinking a RC cigarette boat too.
@jamessaxon2837
@jamessaxon2837 Рік тому
Anything is possible but it will have to carry a lot of fuel
@backwoodsjunkie08
@backwoodsjunkie08 Рік тому
@John Connor I ment just the idea and visual of it. But yes... It has a long way to go before it will catch up to other 4 strokes in the industry like Saito and O.S.
@dennisdempseyradiooutofcontrol
@dennisdempseyradiooutofcontrol Рік тому
Cool vid brother! Glad you got an in-depth look at the flanged crankshaft end bearings, 👍👍
@DanielHernandeztinkers
@DanielHernandeztinkers Рік тому
They listened to you Dennis, looks the same as your fix on the L400 crankshaft center support!!! 👍🙌
@baby-sharkgto4902
@baby-sharkgto4902 Рік тому
I figured that Dennis would see this 😎
@dennisdempseyradiooutofcontrol
@dennisdempseyradiooutofcontrol Рік тому
@@baby-sharkgto4902 yeah been waiting for this V8 since they first planed on making it lol!
@carrographymedia9309
@carrographymedia9309 Рік тому
This made my day thank you
@shelbygtman
@shelbygtman Рік тому
I just love your videos bro, keep up the awesome work... I'm a fan for life!!!!👍
@gmeast
@gmeast Рік тому
proper fuel/air is very hard to maintain for small flows ... so this is impressive.
@backwoodsjunkie08
@backwoodsjunkie08 Рік тому
Very much so!! That's why I lost a few rc planes. So hard to get tuned right.. especially for takeoff when you have a G load on the fuel
@cambridgemart2075
@cambridgemart2075 Рік тому
It really isn't, as long as the carb is sized for the flow rates; I used to run 1.5 (0.09CI) glow (methanol) engines and it was easy to get the fuel mixture right from idle to flat out.
@OzarksWildman
@OzarksWildman Рік тому
I need that bolted on my weed wacker! Imagine having a V8 lawn trimmer with zoomie headers.
@ZeddisDead
@ZeddisDead Рік тому
Reminds me of Tim the tool man tailor he was always beefing stuff up back in the day.
@conniedrumjr275
@conniedrumjr275 Рік тому
Just about the coolest thing I ever saw
@UltraMagaFan
@UltraMagaFan Рік тому
Id totally love to see this engine in an RC drag car. I bet that thing would fly.
@stoker20
@stoker20 Рік тому
They already went 200mph in 100ft.
@wparsons
@wparsons Рік тому
Nope, it's heavy and not that powerful at all for it's weight. A good 2 stroke gas engine will weigh much less and make a bunch more power.
@christiansanden8005
@christiansanden8005 Рік тому
@@wparsons Agree beside that thing would take a lot of fuel
@ManicMechanic82
@ManicMechanic82 Рік тому
I’m quite surprised that you run this engine without any oil lubrication at all! But I suppose the grease is enough to suffice! Excellent video! I’m a retired ASE Certified Master Automotive Technician, and I’m just getting into building these tiny automotive combustion engines and I’m loving it. I diagnoses, repaired, built, rebuilt and restored my own vehicles and others cars of course. I’m disabled now but really enjoy these as a hobby. I have some really cool steam engine four bangers, rotary even a couple of small Buick nailhead engines like my big ones. These are a blast (Pun intended)!!!
@christiansanden8005
@christiansanden8005 Рік тому
Yeah, I am wondering too how this engine get lubrication, can't run for long time without problems
@ManicMechanic82
@ManicMechanic82 Рік тому
@@christiansanden8005 Agreed! Far too much heat for too long will easily blow a piston or valve and much more!!! I wouldn’t run them longer than a few minutes so it’s a good thing the fuel tank is so small!!! When putting mine together I lubricated the short block with some Q tips dipped lightly in Royal Purple that I use in my cars and trucks. This at least gives it a bit of a coating. After some thought I decided to use a five weight that I run in my turbocharged four banger performance engines. I felt anything more would result in hydrostatic failure of the lower engine internals because of the micro tolerances in theses mini monsters. As far as the Cylinder Heads, Valves and pistons Rings are concerned they should be well lubricated fine for the first three to five minutes from the grease. It will melt quickly and coat well! But anymore than four or five minutes I would probably suggest checking it once the entire engine has been given a chance to cool before taking off anything more than the Valve Covers! But if you’re anything like me, that’s just part of the fun!!!! How I’d love to stuff this engine into a die cast car with remote control steering and throttle control. That thing would SCREAM!!!! It would be great to terrorize the mice in the barn with! 😂😂
@christiansanden8005
@christiansanden8005 Рік тому
@@ManicMechanic82 Yeah that V8 would be cool in a rc car but without a real lubrication no way, also the consumation is quite high so it would need a huge gastank, i have several rc cars, one with a 2 stroke OS MAX, running fantastic. Kind of weired that this baby V8 are so expensive and without a proper lubrication, no way to run it long time
@ManicMechanic82
@ManicMechanic82 Рік тому
@@christiansanden8005 That’s a fact. I imagine that is why the gas tank is so small! One quick burn and that’s it. At least for a while.
@josiahallen7538
@josiahallen7538 Рік тому
Excellent video! Because it blows fuel and oil out of the exhaust, it would be wicked cool to put top fuel like exhaust on it! Maybe even make a rc dragster!
@jmd1743
@jmd1743 Рік тому
I'm not into RCs but something like that makes me curious about the hobby.
@RacermanXtreme
@RacermanXtreme Рік тому
Every 90s/00s game publisher: DANG IT THEY FOUND OUR SECRET V8 ENGINE NOISE SOURCE
@logicn.reasoning9744
@logicn.reasoning9744 Рік тому
Donut Media, eat your hearts out.
@chrissanchez9218
@chrissanchez9218 Рік тому
Should cam it and straight pipe it 😂 I love it
@WarpedPerception
@WarpedPerception Рік тому
hell yeah
@THROTTLEPOWER
@THROTTLEPOWER Рік тому
👍👍👍
@petrholusa5855
@petrholusa5855 Рік тому
This is mental! I was really thinking what is going on in my 5 cylinder VW T4 engine when I reach about 4000 rpm. It is really going fast!
@Memo_0215
@Memo_0215 Рік тому
I need more of this!!!!! You got yoire self a new subscriber
@FharishAhmedPortfolio
@FharishAhmedPortfolio Рік тому
I came back to watch this video again. Donut Media literally bumbled their video on this one.
@Sn0w1981
@Sn0w1981 Рік тому
Neat! I thought for sure you would also take the air-filter off at the end. Cool to see the cam(s). It's a SOHC dressed up as a DOHC!
@WarpedPerception
@WarpedPerception Рік тому
Yeah I meant to actually, I just had some technical difficulties so I was a little bit behind on this one.
@Sn0w1981
@Sn0w1981 Рік тому
@@WarpedPerception Now to go to the next level, you need to invent a miniature dyno!
@paulborgaily9595
@paulborgaily9595 Рік тому
Crank it up man!
@jim7060
@jim7060 Рік тому
That is absolutely awesome thanks for sharing.🏎️
@hoehere_Gewalt
@hoehere_Gewalt Рік тому
When you see the slowmo run, you really start to understand why V8's have that characteristic sound to them
@SomeD00D01
@SomeD00D01 Рік тому
Ikr
@frankhamilton8257
@frankhamilton8257 Рік тому
FYI, there's a possibility that you'll break one of those exhaust valves if you run this engine for an extended period of time without an exhaust system especially at high RPM. That's why I recommended running zoomies to get the sound you want. Under "real world" circumstances, an exhaust system is there to provide the proper back pressure to enable scavenging of the spent exhaust gases. An exhaust system will also isolate the exhaust valves from being overexposed to O2, which will eventually oxidize them and crystallize their metal composite, making them potentially brittle. You could even put small balls into the ends of the zoomies to prevent water condensation from entering them during or after cool down.
@WarpedPerception
@WarpedPerception Рік тому
Thanks! Those are really great details, those are things not many people think about but you're absolutely correct. For sure I am going to make a proper exhaust, I just ran it without the exhaust to see if it can actually get louder or is it like an engine Port size issue... Thanks !
@Mrshotshell
@Mrshotshell Рік тому
Backpressure is never a good thing. You will have more scavenging and make more power with less back pressure in almost every situation
@frankhamilton8257
@frankhamilton8257 Рік тому
@@Mrshotshell You obviously don't understand the concept. There's a reason every engine has an exhaust system and it has nothing to do with back pressure or noise. An exhaust system, whether it's zoomies (which effectively produces little or no back pressure) or otherwise, is not just there to direct exhaust gas to be dumped out at some point rear of the driver. From an engine perspective (all other issues aside) an exhaust system is ideally designed to "tune" the air flow as it travels through the engine (particularly in an engine with normal induction), and while doing so, provides a certain level of protection to the exhaust valves from being exposed to ambient air, which will ultimately weaken or fatigue the alloys in the metal.
@Mrshotshell
@Mrshotshell Рік тому
@@frankhamilton8257 I never disagreed with that part at all, just the part about needing backpressure
@nerd1000ify
@nerd1000ify Рік тому
​@@frankhamilton8257 My understanding is that the issue with no headers and the valves is thermal shock, i.e. cold air hitting the 800+ degrees C valve cools it very rapidly, over time this can cause cracks to grow in the valve until it breaks. Should not be a serious issue for such a small motor, smaller valves generally don't get as hot because they have more area to conduct heat to the head relative to the amount of heat they absorb. Also glowmotors run on methanol with a hefty dose of oil (usually 20% or so), which naturally burns a lot cooler than gasoline. More broadly, I suspect that this is an engine specific issue. Many WW2 fighters had 'stub' exhausts, the 'header' if you can call it that was no more than a short nozzle that directed the exhaust flow backwards as it came out of the ports on each cylinder (for bonus jet thrust!). These would surely be candidates for the thermal shocking issue, but on the contrary most of them had more trouble with burnt valves than cracked ones, leading to the use of sodium cooled valves, stellite valve seats, etc.
@vettemaniac2237
@vettemaniac2237 Рік тому
Man! That little monster is cool beans!
@mannyacosta4356
@mannyacosta4356 Рік тому
Amazing nice thank you for the video👍
@scrotiemcboogerballs1981
@scrotiemcboogerballs1981 Рік тому
I like it I also like how it looks like a duel overhead cam but only has one cam per head but it’s still awesome I’d love to see how much hp it could make
@technicholy1299
@technicholy1299 Рік тому
The VE will be worse for this engine over an equivalent displacement single or dual cylinder just strictly on frictional losses. It's an aesthetic engine, not an outright performer. I probably wouldn't do much to it simply because lubrication is the biggest enemy to an engine like that, especially for an overhead cam setup like that. The other problem is that it's a 4 stroke and an equivalent displacement 2 stroke will blow this thing away in outright power.
@theshadowowl4196
@theshadowowl4196 Рік тому
who’s here after seeing Donut Media’s video to see the engine running?
@danyalbradley3403
@danyalbradley3403 Рік тому
Yep
@TheTonyMcD
@TheTonyMcD Рік тому
That thing is adorable!
@TheImtoomuch
@TheImtoomuch Рік тому
Music for sure! Very cool engine.
@911delorean
@911delorean Рік тому
This made me think of a really cool idea. Build a rc car around this engine, with a transmission if possible. Hook it up to a PC racing simulator. Drift around a parking lot, or make a racetrack. I could see it becoming a new motorsport. Welcome everybody to the Warped 100.
@WarpedPerception
@WarpedPerception Рік тому
I've been totally thinking about that for a long time now... And it's so crazy that you said that because I literally in the last 4 months pulled together all the components to make that happen in a video... We think the same! That's nice
@BabyJesus66
@BabyJesus66 Рік тому
@@WarpedPerception I want to see that video when you get it done that would be awesome! 👍
@osamabinladen824
@osamabinladen824 Рік тому
@@WarpedPerception Count me in as your sponsor.
@thesquatch9821
@thesquatch9821 Рік тому
Now the question is which vehicle is going to be built around it
@cuda426hemi
@cuda426hemi Рік тому
LOL only if you could pull a trailer of Nitro otherwise 2 minutes doesn't cut it. Nice idea but it wouldn't work. 🚗
@benbentley26
@benbentley26 Рік тому
A man of your talent could build a supercharger for that!! Maybe another episode?
@WarpedPerception
@WarpedPerception Рік тому
Yup
@DJscustommusic
@DJscustommusic Рік тому
its my dream to run all the mini engine you own on many different fuel with you in person just to experience it in person and im your biggest fan ive wtatched almost all your videos.
@thureintun1687
@thureintun1687 5 місяців тому
One of the cutest things ive ever witnessed on UKposts!!!!!!!!! 😃😍😍😍😍
@TheWopper78
@TheWopper78 Рік тому
You are ridiculously talented! What a freakin knowledge of motors and machining you possess that is admirable
@johnburgess2084
@johnburgess2084 Рік тому
I think that's why he gets these motors -- as an excuse to build test jigs to exercise his machining skills!
@lobob420
@lobob420 Рік тому
was it firing on all cylinders? and maybe it was intake choked? there must be a restriction not letting it rev higher! id love to see that thing on a dyno also :D
@productxtreme4732
@productxtreme4732 Рік тому
or maybe it's running too rich? idk
@hunterbear2421
@hunterbear2421 Рік тому
i wouldn't want to rev it much higher then 10k plob would start to melt after awhile even with the cooling that why most run away engines stop running they can hit higher then 10k rpm but the stress on the metal and the heat is too much and they break apart
@alloriginal62
@alloriginal62 Рік тому
Hmm, yeah, build a dyno for miniatures...there's a idea !
@amitpatil1001
@amitpatil1001 Рік тому
I was thinking the same about the intake.
@pistonburner6448
@pistonburner6448 Рік тому
There are so many things wrong with that engine... Cooling, 'oil', intake, fueling, valvetrain (I'm sure it's not sealing properly), it's unlikely to have optimal spark for that engine (even though that's one of the easiest parts),
@josevilla3709
@josevilla3709 Рік тому
This is a man's definition of, aww so cute
@John-uc6gb
@John-uc6gb Рік тому
Real cool again. Thank you
@tslim250
@tslim250 Рік тому
I'm thinking at 28cc it might be able to power a super lightweight go-kart... obviously only to about 2 mph but it theoretically might be able to do it with enough gearing advantage...
@jeffm4284
@jeffm4284 Рік тому
Been a while since I wrenched, but sounds & looks like advancing the timing a bit, if possible, would help at the higher end. It was spitting a ton of fuel after you clipped the headers, so you reduced the back pressure to force secondary burn. Maybe a slight tweak of advancement would allow a more complete burn.
@tomrandall4871
@tomrandall4871 Рік тому
I believe that extra fuel is caster oil and is how the engine gets it's lubricant into the cylinders. Usually these engines are glow plugs and are designed to already run advanced. Hence the nitro / caster oil mixture in the fuel.
@MrDaranel
@MrDaranel Рік тому
You guys are speaking a different language and I love it
@cambridgemart2075
@cambridgemart2075 Рік тому
It's a glow engine, so it has no ignition timing as such.
@adammorris3082
@adammorris3082 Рік тому
I was thinking the same as the other guys have mentioned-there's no advance and retard on a glow plug engine but I'm sure I've seen another vid with this v8 and he had timed spark plugs (JohnyQ90 I think)- I guess with the programmable tech you can buy (Arduino Etc) you could make a proper mini ECU these days too. All the best.
@benblakemore4195
@benblakemore4195 Рік тому
WOW ITS SOOOO COOL BRO!!!!
@nomusicrc
@nomusicrc 3 місяці тому
I love that this video is on the company's website
@michelhickey5765
@michelhickey5765 Рік тому
how hard would it be to connect this to a automatic transmission lol, would make a epic RC car
@Jonathan-qi9rh
@Jonathan-qi9rh Рік тому
It would probably need a fuel tank bigger than the car itself if you want to enjoy it long enough
@christiansanden8005
@christiansanden8005 Рік тому
@@Jonathan-qi9rh Yeah it seems to be that it takes a lot of fuel just like the real V8 does, LOL
@dion_aldi
@dion_aldi Рік тому
Remove the air filter, put twin turbos, and slap a tank of NOS lol 😂😂😂
@DomVito87
@DomVito87 Рік тому
This has giving nitro a second chance and I love it... I have their single cylinder nitro engines an I love them
@turbodill465
@turbodill465 Рік тому
I wonder how many times the people at donut looked through this video to make sure they got it all right
@allgoo1990
@allgoo1990 Рік тому
This is not a toy, but a serious machine.
@ManicMechanic82
@ManicMechanic82 Рік тому
Agreed!!!!
@gyrgrls
@gyrgrls Рік тому
Q: What did the short fat cactus say to the tall skinny cactus? A: You can't be Cereus!
@BumbleBeeJBG
@BumbleBeeJBG Рік тому
Then why did I cackle uncontrollably with joy when I clicked the link and it fired up?
@Mika-ph6ku
@Mika-ph6ku Рік тому
You could put it in a toy though
@gyrgrls
@gyrgrls Рік тому
@@Mika-ph6ku Yes. My wife is into that kind of stuff. No need to be all together, as well.
@pingustrasse
@pingustrasse Рік тому
I´d love to have a toyan engine, but I can´t have fuel in my house so I have a stirling engine. Nice video man, greetings from Spain
@gregtaylor6146
@gregtaylor6146 Рік тому
May I ask ..... WY can't you have fuel in your house (in Spain?)
@pingustrasse
@pingustrasse Рік тому
​@@gregtaylor6146 Cause its very weird to have a fuel tank or something in a flat hahah
@gregtaylor6146
@gregtaylor6146 Рік тому
@@pingustrasse - so, NOT a 'house' then????
@pingustrasse
@pingustrasse Рік тому
@@gregtaylor6146 nope, I live in the 5th floor of a building
@gregtaylor6146
@gregtaylor6146 Рік тому
@@pingustrasse - Again, NOT a 'house' then, which is what you claimed originally. (Jeeezus, it's like teaching chimps!!!)
@geraldpercheron3227
@geraldpercheron3227 Рік тому
Super travail ,bravo Monsieur
@spire4101
@spire4101 Рік тому
Now I want to see this in a bad ass rc truck.
@AfroMyrdal
@AfroMyrdal Рік тому
It sounds like Its choking, do you think it's getting enough air? It sounds good though, and looks awesome!
@WarpedPerception
@WarpedPerception Рік тому
Not enough air at all.
@allentoyokawa9068
@allentoyokawa9068 Рік тому
It is a chinese branded product, don't expect much
@meko8874
@meko8874 Рік тому
@@allentoyokawa9068 Unfortunately at the moment you can only count on this chinese brand, as a consumer I do not care where it is produced, not to mention that most people are tired of this cliché, you like weeb so much should know how the evaluation of japanese products in the last century is rising, now you criticize chinese goods are just like the pot calling the kettle black.
@fangthewarrior
@fangthewarrior Рік тому
It would be awesome to see these in a chassis! As a nitro RC. There are kits available and wouldn't be too hard to put this in 👀 Perhaps you could even make a mini Supra modeled after yours
@TestECull
@TestECull Рік тому
Save your $1,700. This thing overheated when it wasn't doing anything more taxing than spinning its own flywheel because the cooling system is woefully inadequate, it can't breathe, it didn't even live up to the 12,500RPM promises in the pre-release marketing spiel, and it clearly has issues with staying running at lower speeds.
@AndrewMalkin
@AndrewMalkin Рік тому
@@TestECull His coolant had tons of bubbles. It's hard to tell how well it cools when it wasn't bled well.
@TestECull
@TestECull Рік тому
@@AndrewMalkin It should self bleed without any issue. The fact that it didn't, combined with the fact that the radiator was still pretty much room temperature while the engine was screaming hot, tells me the water pump, cooling passages, pipework, et-al is just not up to task.
@BIGREDTECH
@BIGREDTECH Рік тому
JohnnyQ90 runs a couple of these small engines on his rcs
@BIGREDTECH
@BIGREDTECH Рік тому
@@TestECull I think the hoses were waaaaaay to long. Imagine putting that amount on a vehicle. It’ll do the same
@seekter-kafa
@seekter-kafa Місяць тому
electro starter bought me completely... whatta piece of machine... can wait to finally be able to afford me a new V8! MadMaxII here i come
@caseyjones7714
@caseyjones7714 Рік тому
Amazing peace of engering 👌
@exaltedb
@exaltedb Рік тому
The thing honestly sounds almost like a baby nascar engine. Love this little monster
@THESLlCK
@THESLlCK Рік тому
sounds nothing like a nascar at all lol
@mrpayne508fr8
@mrpayne508fr8 Рік тому
@@THESLlCK it does with the full muffler. After cutting and removing it's just like a chainsaw
@xjmg007
@xjmg007 Рік тому
Collector's merged into an x-pipe to duals would sound the best imo, you'll pick up some scavenging and drastically improve the sound. Either that or headers merged into a single large pipe.
@WarpedPerception
@WarpedPerception Рік тому
I think you are correct!
@xjmg007
@xjmg007 Рік тому
@@WarpedPerception yep, I see a lot of comments about back pressure being needed, it's simple not true, you do need some length for the header to keep the valves living. The back pressure argument has been disproven many times I've read that in the comments quite a bit. As drag racer it's simple not true, any back pressure will hurt power if the exhaust is designed efficiently to scavenge.
@shawnbrown6544
@shawnbrown6544 7 місяців тому
Like to see it with a scatpac exhaust system
@FaisalReacts
@FaisalReacts Рік тому
looks like a full original size V8 engine 👍
@yassinehariri5403
@yassinehariri5403 10 місяців тому
this is sick!
@micahelijaheguia3671
@micahelijaheguia3671 Рік тому
make for it an twin turbo setup
@k-dawg58
@k-dawg58 Рік тому
Who came across from donut media ? 😂
@slickusaf78
@slickusaf78 Рік тому
Gorgeous
@Adam_Smith-08
@Adam_Smith-08 7 місяців тому
Woow soo cool! I wanna see it on road
@locouk
@locouk Рік тому
I’m not keen on nitro engines, they’re too messy to run. China needs to design a wet sump, oil pumped gas V8 the same size to be a winner in my eyes.
@nutsackmania
@nutsackmania Рік тому
Yeah "China" get on it! Do hard work in exchange for money we print. America demands serious toy V8s.
@nasrollahambor6746
@nasrollahambor6746 Рік тому
still @DonutMedia was unable to build it
@hezi973
@hezi973 Рік тому
You should open up design and fabrication school and people will line up. Your videos are a joy for us simpleton that still use an angle grinder and a drill to fabrics parts.
@johnjacobjingleheimerschmi3857
@johnjacobjingleheimerschmi3857 Рік тому
Year's ago there was a guy building Supercharged OHV V-8 engines. His name was Gary Conley, of Conley Precision. He built a Dragster and a Shelby Cobra equipped with one of his engines. They put out 10hp! His shop caught on fire and I think he quit. I think there's some UKposts videos out there. One guy built a Grave Digger Monster Truck, another, a V Drive Off Shore racing boat, that had 4 Supercharged Conley V-8's! Super cool stuff.
@Ghostingmark
@Ghostingmark Рік тому
Whos here cause of DONUT ?!?
@MrXhandsome
@MrXhandsome Рік тому
It's misfiring badly... When you have so many cylinders, you need a proper ignition system. This engine needs real sparkplugs and an Electronic Ignition System to create organized firing inside the cylinders.. It's a shame they did in Nitro intead of pump gas. No oil pump either. Improvements need to be done here.
@eljaibas16
@eljaibas16 Рік тому
I doesn't even have like a proper oil sump, the crankshaft only gets lubricated be the nitro-oil mix that passes through the rings
@MrXhandsome
@MrXhandsome Рік тому
@@eljaibas16 I wouldn't have approved such a crappy engine system to be taken to production... I mean, how is this supposed to compete against a brushless motor.. let's not even talk about price differences.. a premium brushless motor is about $200 bucks.. 8 times cheaper, and 20 times cleaner. This engine needs: *Proper Ignition System with coil box *Real sparkplugs *Crankshaft position sensor linked to ignition computer to tell the sparkplugs when to fire. *Oil pump to bring oil to the head. *Piston Ring sets to increase compression and something extra but really nice: *a hydraulic torque converter to be able to use combustion rc engines in rock crawlers... centrifugal clutches suck at low rpms.
@lsxbigblock6524
@lsxbigblock6524 Рік тому
@@MrXhandsome but they dont sound like anything special. who cares about your dewalt BLM rc car
@MrXhandsome
@MrXhandsome Рік тому
@@lsxbigblock6524 what are you talking about man.. did you even read. What car are you talking about.. you need social skills for your soul.
@christiansanden8005
@christiansanden8005 Рік тому
@@MrXhandsome Agree, for that kind of money it should have a real ignition and lubrication system, expensive toy beside it takes a lot of fuel, awesome tough
@tomrandall4871
@tomrandall4871 Рік тому
Does the starter disengage? Or does it spin? If it spins and the engine is at 10,000 rpm and the ratio of the starter is say 10:1 looks much higher, that would indicate 100,000 plus rpm at the starter.
@zigandarov
@zigandarov 9 місяців тому
Cool good energy motor 👍👍👍
@shannonsisk
@shannonsisk Рік тому
This is really cool. However it blows my mind that there is enough demand for these to sustain a business, even though you can buy a REAL engine for much less. Still very cool.
@christiansanden8005
@christiansanden8005 Рік тому
Yes I am wondering to, 2 grand is a lot of money for that toy
@rudolfjakobsen7300
@rudolfjakobsen7300 Рік тому
Definitely music in my ears 🎵 👂🤗
@carfirehawk1
@carfirehawk1 Рік тому
great, great clip that the vast majority of **us wouldn't be able to see without these clips... love this channel
@DRCVideos
@DRCVideos Рік тому
I'm going to watch all your Videos
@billyclark7341
@billyclark7341 Рік тому
THAT IS COOL AS HELL
@dclary9071
@dclary9071 Рік тому
Listen closely to the music it makes during the slow motion. It's really cool.
@michaelpressman7203
@michaelpressman7203 Рік тому
I can't believe the detail in that motor it was outstanding and I wish real cars would run real bearings and on their cranks instead of bobbits have a good day
@RAWRMotorsports
@RAWRMotorsports Рік тому
This ia frighin shaweeet !
Twin Supercharged 4 Cylinder Nitro RC Engine
15:44
Warped Perception
Переглядів 6 млн
Worlds Smallest Rotary Engine (30,000 RPM)
9:12
Warped Perception
Переглядів 4,1 млн
Самый большой бутер в столовке! @krus-kos
00:42
Кушать Хочу
Переглядів 1,4 млн
Депортация ингушей в СССР
00:54
Настоящее Время. Док
Переглядів 7 млн
SUPERCHARGER Installation on RC V8 Car and TEST!
8:51
JohnnyQ90
Переглядів 4 млн
How Japanese swords are made. The top-secret story of a sword smith.
39:52
ジャパニーズインダストリー / Japanese Industry
Переглядів 627 тис.
See Through Engine on TURBO NITRO & EFI (E.7)
21:13
Warped Perception
Переглядів 3,3 млн
Can I put a REAL V8 ENGINE into a TOY CAR?
11:27
Kevin Talbot
Переглядів 2,2 млн
Miniature V8 Engine Runs like the Real Thing - (78cc DOHC 6HP)
6:46
Warped Perception
Переглядів 865 тис.
I Trap Myself in a Box with Colored Smoke!
0:50
A4
Переглядів 6 млн
ДЕВУШКА СПАСЛА ПОДРУГУ 😨 #факты #добро
0:28
НАИЗНАНКУ
Переглядів 1,7 млн
Помогла маленькой девочке в беде 🥺 #фильм #сериал
0:59
DixyFilms - Фильмы и сериалы
Переглядів 6 млн